Related
Hi all ...
Today i show you how Root And TWRP Recovery for SM-J530F without any Problem
Part 1 : Root
ENABLE OEM UNLOCK and usb development
Note : all you data we will delete all Make sure take Backup !!
a) Download CF-Auto-Root from this link : https://download.chainfire.eu/1135/...y17lte-j5y17ltexx-smj530f.zip?retrieve_file=1
b) Flash with ODIN 3.10.7 in the AP slot.
c) Put your device in DOWNLOAD mode.
d) Load the CF-Auto-Root-j5y17lte-j5y17ltexx-smj530f.tar.md5 file below into the AP slot and hit start.
e) waiting finish, after finish you will see message ( you device is problem press Erase to fix ) press Erase and wait for Erase all data
F) after reboot,, again start in option " C "
g) Now after again Load the CF-Auto-Root file below into the AP slot and hit start. ,,, waiting finish and device is working again ,, you will see SuperUser
Congratulations !!
Now you can flash TWRP recovery form here :
https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
Jest only do this :
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
this is all ,, Sory for bad English
​
Hi, can anyone confirm that this instructions works
SM-J530F/DS
Confirmed working! Thanks @Abdullah_a86 :good:
Twrp install errors
So, i flashed the twrp with odin after enabling 2 things in developer options .
Good, i entered the TWRP menu from phone and formated data , after that when i was trying to install the Magisk Root it always show errors like:
E: TOUCH_DRAG (or HOLD or REPEAT or RELEASE): and 2 numbers here like 575,1000 (example)
Please help me.
The phone is working but i think twrp is broken idk please help.
Thanks
Thanks!
who can, adapt to SM-J530FM recovery ???
(FM - version)
Does it work on the dual sim model?
Does it work on J530F/DS? The dual sim model, thanx in advance
Not working -- UNSTABLE !!!
Yesterday I've followed this root guide to root my J530F (NOT Pro-edition, NOT dual sim) and it worked great but for short time. The first root app I've installed is "Root Checker" to confirm that root is installed correctly - and it was. Then I was installing "Lucky Patcher" app and there was no prompt for root access from SuperSU. I went back to "RootChecker" it was telling me that my root is not available.
Then I rebooted my phone and I got famous Samsung "Black screen of death" - J5 logo appears and then blank, nothing on the screen. I got in Download mode without a problem, re-flashed my firmware (AP) and works fine.
Now it feels stupid, while I triggered KNOX to 0x1 and I don't have a root. I haven't tried this TWRP recovery because I'm afraid that it won't work and that I'll have to format my phone again and start from the beggining.
It is very important that you guys share your experience, so the other knows if this is working or not.
Anyone tried this custom TWRP Recovery???
in my Experience the best way to root j530f is trwrp+ refined kernel
wetito said:
in my Experience the best way to root j530f is trwrp+ refined kernel
Click to expand...
Click to collapse
Can you confirm that TWRP recovery from the first post is working?
Thanks!
Yes it works
wetito said:
Yes it works
Click to expand...
Click to collapse
I've just tried to install TWRP over stock firmware (not rooted) and I got bootloop. I can enter TWRP, but Android can't start. I guess I will wait for some time while stable custom recovery is released. I use this phone everyday, so I can't deal with all of these problems...
In my case root and recovery from this post is not working.
Hope there will be official solution soon.
Thanks!
Guys, someone please help, i have J5 PRO 2017 SM-J530G, i did a search on all XDA and did not found twrp for my model "G", found only for models Y and F, so i must ask if that version exists, and where i can find it ! Second question would be, if i can't find one especifically for G model, if i can use Y or F model of twrp ! thanks in advance for someone that can help !
NeleRS said:
I've just tried to install TWRP over stock firmware (not rooted) and I got bootloop. I can enter TWRP, but Android can't start. I guess I will wait for some time while stable custom recovery is released. I use this phone everyday, so I can't deal with all of these problems...
In my case root and recovery from this post is not working.
Hope there will be official solution soon.
Thanks!
Click to expand...
Click to collapse
Same problem in my case.
Hi. I have problems with the Google Assistant after rooting it. It stucks after telling it a command and suddenly crashes. Why does anything to do this with the root? Google Assistant and root haven't any relationship!!! I also have problems with an app called HelloTalk because it stucks in the chat screen too.
I had to flash my phone back to Stock ROM, because it gets stable again.
Thank you!
Enviado desde mi SM-J530F mediante Tapatalk
JaviLukiOficial said:
Hi. I have problems with the Google Assistant after rooting it. It stucks after telling it a command and suddenly crashes. Why does anything to do this with the root? Google Assistant and root haven't any relationship!!! I also have problems with an app called HelloTalk because it stucks in the chat screen too.
I had to flash my phone back to Stock ROM, because it gets stable again.
Thank you!
Enviado desde mi SM-J530F mediante Tapatalk
Click to expand...
Click to collapse
try root with magisk 14.0 and choose hide magisk
Abdullah_a86 said:
try root with magisk 14.0 and choose hide magisk
Click to expand...
Click to collapse
Where can I find the Magisk 14.0 patch for this phone model? I've never used this Root Manager.
Enviado desde mi SM-J530F mediante Tapatalk
JaviLukiOficial said:
Where can I find the Magisk 14.0 patch for this phone model? I've never used this Root Manager.
Enviado desde mi SM-J530F mediante Tapatalk
Click to expand...
Click to collapse
How to Install Magisk Latest Version 15.0 on Android [Non-Rooted Phones]
Download and install the Magisk v15 zip file from here:
http://magiskmanager.com/Magisk/Magisk-v15.0.zip
Place the zip file in your internal storage. Make sure that you remember the proper location of the zip file.
Reboot your phone into recovery ensure that you have a custom recovery such as TWRP is installed on your phone.
Now, click on the Install button in the TWRP recovery.
Download Magisk Manager
Navigate the Magisk-v15.zip on your internal storage or SD card.
Download Magisk Manager
Now, install the zip file on your device and wait till it is getting installed on your device.
Download Magisk Manager
You have successfully flashed the Magisk-v15.zip on your device.
Reboot your phone and see if it works on your device.
Download Magisk Manager
Download the magisk manager application from here: https://magiskmanager.com/Magisk/MagiskManager-v5.5.1.apk
Install the application by following the above procedure.
Open it and then you will see magisk is installed on your Android device.
Source :
https://magiskmanager.com/
Abdullah_a86 said:
How to Install Magisk Latest Version 15.0 on Android [Non-Rooted Phones]
Download and install the Magisk v15 zip file from here:
http://magiskmanager.com/Magisk/Magisk-v15.0.zip
Place the zip file in your internal storage. Make sure that you remember the proper location of the zip file.
Reboot your phone into recovery ensure that you have a custom recovery such as TWRP is installed on your phone.
Now, click on the Install button in the TWRP recovery.
Download Magisk Manager
Navigate the Magisk-v15.zip on your internal storage or SD card.
Download Magisk Manager
Now, install the zip file on your device and wait till it is getting installed on your device.
Download Magisk Manager
You have successfully flashed the Magisk-v15.zip on your device.
Reboot your phone and see if it works on your device.
Download Magisk Manager
Download the magisk manager application from here: https://magiskmanager.com/Magisk/MagiskManager-v5.5.1.apk
Install the application by following the above procedure.
Open it and then you will see magisk is installed on your Android device.
Source :
https://magiskmanager.com/
Click to expand...
Click to collapse
That web page is false. The same creator of the application has confirmed it in his thread
I think you should reference and post the links to the author's thread and not to a third-party page.
Sent from my Samsung Galaxy S8+ using XDA Labs
ASPViTo said:
Guys, someone please help, i have J5 PRO 2017 SM-J530G, i did a search on all XDA and did not found twrp for my model "G", found only for models Y and F, so i must ask if that version exists, and where i can find it ! Second question would be, if i can't find one especifically for G model, if i can use Y or F model of twrp ! thanks in advance for someone that can help !
Click to expand...
Click to collapse
Anyone can help?
Hello i have the Samsung Galaxy M10 SM-M105F.
I need to root the Phone for make Custom Rom or Edit the Scripts.
I have OEM Unlock the Bootloader and install the Unofficial TWRP with Odin From here
https://forum.xda-developers.com/ga...p-3-3-0-twrp-recovery-samsung-m10-sm-t3925243
TWRP work, but the System is in Bootloop.
Pls i need help to root My Device with working TWRP, System boot and Root
BlacklightMG said:
Maybe try flashing 'no-verity-opt-encrypt' and 'RMM Bypass' zip files?
EDIT: Flash Magisk zip too (it removes dm-verity), and format the data partition
Click to expand...
Click to collapse
It'll be rooted when you flash Magisk. And install the Magisk Manager APK too, to allow root control.
I actually rooted without TWRP by flashing the patched boot image generated from Magisk, and then performed a factory reset because file integrity couldn't be verified. But the Magisk binaries worked.
Amazing, can you pls Upload your Modified Bootloader for me and all People here ?
For make the Galaxy M10 open for users and Dev's.
Sorry for the late reply, but it's always better to do it yourself depending on what OTA update you are currently on. Download the firmware, extract the boot image and patch it with Magisk Manager. Then flash it with ODIN or Heimdall while in download mode. Then I had to factory reset because file integrity could not be verified. But the root was preserved.
BlacklightMG said:
Sorry for the late reply, but it's always better to do it yourself depending on what OTA update you are currently on. Download the firmware, extract the boot image and patch it with Magisk Manager. Then flash it with ODIN or Heimdall while in download mode. Then I had to factory reset because file integrity could not be verified. But the root was preserved.
Click to expand...
Click to collapse
Can you show us how to extract the boot image and patch it with magisk manager ?
I have on my SM-M105FD the Firmware 8.1.0 and Working Root.
Download the Firmware 8.1.0 on the PC and the AP File put on the Phone.
Download and install magisk apk on your Device and patch the AP in Magisk file.
flash the Firmware full with Odin but put on the AP Option the Patched AP file flash and work.
I have with Magisk install the Xposed Framework and install nice plugins.
My phone became stuck in a boot loop so i tried to go back but whenever i try to flash the stock rom through odin it says sw REV. Check fail (Bootloader) Device: 2, Binary 1
Iam Facing A Problem Kindly Guide Me Samsung Galaxy M10 Smm105f U2 Installed Twrp Rec
Iam Facing A Problem Kindly Guide Me
Samsung Galaxy M10 Smm105f U2
Installed Twrp Recovery With Odin
Wiped Data
Flashed Successfuy
No Verify Opt
Rmm State Bypass
And Magisk
Now I Want To Boot In System But After Booting In System Process Device Asking Me For A Password
"Ur device Is encrypted For Security Plz Type ur Pswrd "
Even I Haven't Locked Phone With Any Kind Of Privacy
And I Have Also Flashed A New Firmware But Problem is same it's Not Booting in System
It won't work on android 10, you have to switch to android 8.1,then try ?
DJSAJJAD said:
Iam Facing A Problem Kindly Guide Me
Samsung Galaxy M10 Smm105f U2
Installed Twrp Recovery With Odin
Wiped Data
Flashed Successfuy
No Verify Opt
Rmm State Bypass
And Magisk
Now I Want To Boot In System But After Booting In System Process Device Asking Me For A Password
"Ur device Is encrypted For Security Plz Type ur Pswrd "
Even I Haven't Locked Phone With Any Kind Of Privacy
And I Have Also Flashed A New Firmware But Problem is same it's Not Booting in System
Click to expand...
Click to collapse
It won't work on android 10, you have to switch to android 8.1,then try ?
This is based off U4 PNG Android 10
Has been seriously debloated lots of under the hood tweaks and custum Kernel by @minhka98 Has Been tested and confirmed to run on A305f, A305gt and A305g but on A305g you need to first flash PNG firmware via odin then reroot and twrp then install rom.
PNG firmware https://www.sammobile.com/samsung/galaxy-a30/firmware/SM-A305GN/PNG/download/A305GNDXU4BTB3/325589/
Source code for kernel https://github.com/minhker98/android_kernel_samsung_universal7904
Source code for quantium kernel https://github.com/carlos-burelo/Quantum_Kernel_Q_A305X
V Q https://www.androidfilehost.com/?fid=4349826312261768148
Download https://www.androidfilehost.com/?fid=4349826312261763783
Download VQ6 https://www.androidfilehost.com/?fid=4349826312261764500
Download VQ7 https://www.androidfilehost.com/?fid=4349826312261766156
Download VQ9 https://www.androidfilehost.com/?fid=4349826312261783765
Download VQ11 https://www.androidfilehost.com/?fid=4349826312261785193 @Minhker98 kernel
Download VQ12 https://www.androidfilehost.com/?fid=4349826312261785498 @CarlosBurelo31 kernel
flash with twrp rom is non rooted but dont use higher then 19.3 magisk as wont boot with kernels
Magisk download https://github.com/topjohnwu/Magisk/releases/download/v19.3/Magisk-v19.3.zip
Telegram https://t.me/ultimate_Pie2
Change Log
VQ6
google contacts and restore fixed
vQ7
camera has been redone
some bug fixes
low sound
apps added
ES-File-Explorer-File-Manager
RootExplorer_v4.2.4
Telegram_v5.15.0
xda_labs
viper4fx_2.7
Magisk manager
VQ
no kernel
hdr camera added
dolby added
and more tweaks to system
root explorer out
Mix explorer in
VQ8 has custom Kernel by @minhka98 and same changes a VQ
VQ9 has custom Quantum kernel by @CarlosBurelo31 same changes as v8
reseverd 2
reserved #2
Great rom! If you have SM-A305G you have to flash PNG FIRMWARE with Odin , patch AP file of zip with magisk,after reboot make the whole process of wipe data factory reset, boot your device and after that is done ,just flash TWRP ,once you have PNG firmware installed ,rooted, and with TWRP.
1- Enter TWRP and wipe ,advance wipe, wipe dalvik Art, system data and cache.
2-flash rom
3- after installation is finished ,flash dm-verity disable zip.
4-wipe cache and reboot,let the rom starts and when it's done ,reboot to TWRP and flash magisk 19.3.
5-reboot!! And enjoy! XD
please make a thread and Q7 rom for Galaxy A40, I have A405FN
Ben3344 said:
please make a thread and Q7 rom for Galaxy A40, I have A405FN
Click to expand...
Click to collapse
come to telegram i have a rom for a40 i need testers
Automatically restart
anabumac said:
Automatically restart
Click to expand...
Click to collapse
go down a version ill fix 8
Which TWRP should i use with Android Q?
Geiti's TWRP worked with pie. but it's not working with 10 anymore. Please help. Thanks
AnasOmar said:
Geiti's TWRP worked with pie. but it's not working with 10 anymore. Please help. Thanks
Click to expand...
Click to collapse
what boot loader
PHP:
shumway66 said:
what boot loader
Click to expand...
Click to collapse
Installed TWRP through bootloader. After successful installation it says "No OS installed". Then i tried to install Ultimate Q V8 rom. But installation stuck because it can not find /system partition. I tried to install PNG rom. But Odin fails to install PNG rom on my device. Which TWRP should i use? My device is SM-305F and updated to android Q. Please help me in this situation. Thanks
AnasOmar said:
PHP:
Installed TWRP through bootloader. After successful installation it says "No OS installed". Then i tried to install Ultimate Q V8 rom. But installation stuck because it can not find /system partition. I tried to install PNG rom. But Odin fails to install PNG rom on my device. Which TWRP should i use? My device is SM-305F and updated to android Q. Please help me in this situation. Thanks
Click to expand...
Click to collapse
come to telegram can help better from there https://t.me/ultimate_Pie2
TWRP for a305g?
xerostratos said:
Great rom! If you have SM-A305G you have to flash PNG FIRMWARE with Odin , patch AP file of zip with magisk,after reboot make the whole process of wipe data factory reset, boot your device and after that is done ,just flash TWRP ,once you have PNG firmware installed ,rooted, and with TWRP.
1- Enter TWRP and wipe ,advance wipe, wipe dalvik Art, system data and cache.
2-flash rom
3- after installation is finished ,flash dm-verity disable zip.
4-wipe cache and reboot,let the rom starts and when it's done ,reboot to TWRP and flash magisk 19.3.
5-reboot!! And enjoy! XD
Click to expand...
Click to collapse
Twrp for a305g?
Menchu_ADan said:
Twrp for a305g?
Click to expand...
Click to collapse
Come to telegram
play store problem
after installing VQ12 i can't download from play store
SUPERB..!!
Works just fine. Its simple , Fast and De-bloated..!! Great Work keep going..!! :good:
Hi !
I have a SM-305G. with android 10
I downloaded PNG Firmware and Odin 3.13.1
I unlocked phone via developer menu and option in downloader (and it delete my phone)
When I try to send png firmware. Odin Fail
Do you know why ?
houbahop said:
Hi !
I have a SM-305G. with android 10
I downloaded PNG Firmware and Odin 3.13.1
I unlocked phone via developer menu and option in downloader (and it delete my phone)
When I try to send png firmware. Odin Fail
Do you know why ?
Click to expand...
Click to collapse
Need odin 3.14
Could you port this to the A30s?
Hi there, fantastic job on the ROM!
But could you also make it for the A30s?
I can test it for you, and others can too.
Thanks in advance!
Disclaimer : I am in no way an experienced developer and make sure that you have the stock firmware if needed. Please do not follow this guide if you do not know what you are doing.
Description
This is something I thought of doing as I needed this tablet for university work. I do not promise support but will post if I get more things like this done.
Kernel with Defex disabled for Samsung Galaxy Tab A 8.0 (2017) T385.
The boot image was repacked with a stock boot image and a custom compiled kernel only with modifications to remove defex and to be able to flash magisk on the latest firmware (XME-T385DXU3CTH2-20200828114930) which it was extracted from.
The ZImage is attached if you want to repack it by yourself.
I do not guarantee if this will work on your device. Flash at your own risk.
Notes on Flashing and Root
What I have used :
1. Flash boot.img to BOOT in heimdall with `--no-reboot`
heimdall flash --no-reboot --BOOT boot.img
2. Use key combo to get into TWRP Recovery
3. Factory Reset -> Type yes
4. Reboot into TWRP Recovery
5. Flash Universal+DM-Verity+and+ForceEncrypt+Disabler+(2020-11-02)
6. Flash RMM_Bypass_v3
7. Reboot into System and verify that the kernel version is correct (3.18.120 Feb 9 2021)
8. Reboot to Recovery and flash Magisk normally
Download
Github Release
Credits
@corsicanu - RMM_Bypass_V3
@SebaUbuntu - Device Tree Skeleton
References
RMM Bypass Guide
Compiling Kernel Guide
Defex Discussion Github Magisk
Android Image Kitchen
Probably keep another post just in case.
Its worked and my SM-T385 has been rooted !!!
Thank you so much for your kernel @brokenaxe
GitHub Link not working !!!
Thankyou sooo much mann.. You don't know how frustrated I was with three SM-T385 tabs in my office which were dead slow and desperately needed root. Those things straight up bootlooped after installing magisk and I was always back to square one. You're a lifesaver. Thanks again...
So I Found Out How To Root SCV40 Or Any Japan Varient Matter Of Fact
This Does Require You To Have A PC And Have Odin And Download Mode In Tact
WARNING
THIS WILL TRIP KNOX AND CAN MAKE YOU LOSE ACCESS TO SAMSUNG PAY AND HEALTH AND STUFF
I WONT BE RESPONSIBLE FOR THE DAMAGE CAUSED BY YOU IF YOU MESS UP
IF THIS IS YOUR FIRST TIME GO WATCH SOME SAMSUNG ROOT VIDEOS FOR A BETTER IDEA
ONLY WORKS ON ANDROID 10, YOU COULD TRY IT ON LOWER VERSIONS BY DOWNLOADING LOWER FIRMWARE BUT AGAIN I AM NOT RESPONSIBLE FOR THE DAMAGE CAUSED
Method #1
DOWNLOADS:
N9600 Klabit Kernel
Modded Odin 1.14.1 ( I Used Normal 1.14.1 But Modded Is Better Sooooo Ok)
Firmware To Flash (Using Odin)
TWRP
Magisk (Go To Github And Download Cuz If There Is New Update You Will Get It Right Away)
Now....
How To Root:
Install Odin And Put Klabit Kernel On Your Phone SD Card
Flash The Firmware Using Odin In Download Mode
Flash TWRP In AP Section With Odin In Download Mode
Format Data In TWRP And Reboot To Recovery Again
Install Your Klabit Kernel In TWRP
Install Magisk
Congrats, Your Mobile/Phone Is Rooted
Special Thanks To:
Klabit For DM Verify Disabled Kernel
Topjohnwu For Magisk
Next Droid For Giving Me The Idea
Enjoy Your Rooted Phone/Mobile
Method #2
THIS DOES REMOVE THE DOCOMO LOGO IF YOU USING THE NORMAL SCV40 FIRMWARE
AND IT DOESNT HAVE BLOAT WARE
I RECOMMEND YOU USE THIS METHOD
So This Method Req A Custom Rom So Get A Custom Rom Or Get This One
Downloads:
Odin
Dot OS
TWRP
Magisk From Github
So Go Into TWRP And Wipe Data
Then Reboot Back Into TWRP
Install The Dot OS GAPPS Edition Or Dot OS And GAPPS With TWRP
After That Install Magisk With TWRP Or Boot Up The Phone First Then Install Magisk With TWRP
Enjoy Your Rooted Phone
Method #3
This Is Called The Stock Root Cuz It Req You To Root With The Stock Rom That Came With Your Phone
THIS IS KINDA RECOMMENDED CUZ I DID THIS ONLY ONE TIME
Downloads:
Odin
TWRP
N9600 Klabit Kernel
Magisk From Github
SCV40 Firmware For SCV40 Based Note 9
So What Your Gonna Do Is Flash TWRP With Odin And Boot Into TWRP
Download And Copy The Magisk And Klabit Kernel To SD Card
Go Into The Wipe Option In TWRP And Wipe Data
Install Klabit Kernel And Magisk Then Reboot To System
It May Bootloop For Some Secs But Then It WIll Be Done
Enjoy
Sub To Me One YT A Vid Will Be Coming Out About This Soon
THIS WILL NOT WORK FOR OTHER DEVICES
I FORGOT TO MENTION IT WILL BOOT LOOP FOR SOME SEC
no one gonna thank me?
n9600 works with scv40????
CheapPlayz said:
no one gonna thank me?
Click to expand...
Click to collapse
Thanks in Advance! I will give it a try on my Docomo variant.
Highsp30 said:
n9600 works with scv40????
Click to expand...
Click to collapse
no
CheapPlayz said:
no one gonna thank me?
Click to expand...
Click to collapse
Thanks for the guide, CheapPlayz! It helped me get on the right track to update my SCV40.
Brother thanks lot. BTW is there any android 12/13 custom roms for Note 9 ( SCV40) ?
Thanks bro! It's useful for my Note9(N-9600).
Final, I root my phone.
I am using a DOCOMO variant. Which kernel I should use? g9600 or g9650 or n9600?
please help! I am gonna do it tomorrow.