Related
Hi guys .. can you share the backup NVRAM.bin of your phone 'cuz i have a problem of my unit my phone detects a sim name of our carrier but it says NO SERVICE, both sims, in Wifi also it can detect wifi networks but can't connect, also in bluetooth, i always refresh it to scan but cannot found nearby devices, and also when i used the wifi-hotspot to activate the Shareit apk but it says restart hotspot, it keeps restarting .. i think the NVRAM has been damaged
last time i've remembered, this phone was deadboot and i flashed the firmware through SP Flash Tool .. i've used FORMAT ALL + DOWNLOAD option, it's working now but i cannot use the wireless connections .. when i checked the scatter firmware, there is no nvram.bin on the folder
someone else here who has a good heart to share his NVRAM or full backup rom ?? much better if its already flashable
i hope you would help me out of this problem
Doctor_Titi said:
Hello
I'm not an expert about Asus Phones (I've got my own ZenFone Go just since 2 days), but i'm not sure then NVRAM.bin cause networks problems. This could be something like Baseband or Firmware. Have you searched if Asus released full firmware for your phone? (and also try to flash it from recovery, or your PC) This could generally solve some problems.
Click to expand...
Click to collapse
Hey friend could you send me, firmware or backup, flash sp flash tool, thanks! Asus zc500tg:dedos cruzados::dedos cruzados:
Doctor_Titi said:
Sorry, I dont have this phone :/ but I'll try to search ROM for ur phone if it's available. What have you tired to make it working? (And also how you bricked ur phone)
Click to expand...
Click to collapse
I have an asus zc500tg v 12.1.0.5, the brickeo brickeo to the moemento of flashing a rom in twrp recovery and it does not turn on but the pc detects it !, I need your help to solve the problem, I am from colombia. : Eek::
Doctor_Titi said:
If ur phone is recognized, try fastboot and ADB command. Also, have you tried to unlock your bootloader? Because an locked boot loader brick your phone if he's not. (But you can recover this, by processing unlocking operation in fastboot/recovery)
Click to expand...
Click to collapse
Hello friend, I can not recover the mobile with adb and recovery, I need a firmware backup for sp flash tool
Help Me
Help me zenfone go zc500tg zoovd my phone is wrong root then total dead can not live
if your phone can not live, what can we do?
tambok_15 said:
Hi guys .. can you share the backup NVRAM.bin of your phone 'cuz i have a problem of my unit my phone detects a sim name of our carrier but it says NO SERVICE, both sims, in Wifi also it can detect wifi networks but can't connect, also in bluetooth, i always refresh it to scan but cannot found nearby devices, and also when i used the wifi-hotspot to activate the Shareit apk but it says restart hotspot, it keeps restarting .. i think the NVRAM has been damaged
last time i've remembered, this phone was deadboot and i flashed the firmware through SP Flash Tool .. i've used FORMAT ALL + DOWNLOAD option, it's working now but i cannot use the wireless connections .. when i checked the scatter firmware, there is no nvram.bin on the folder
someone else here who has a good heart to share his NVRAM or full backup rom ?? much better if its already flashable
i hope you would help me out of this problem
Click to expand...
Click to collapse
Hello tambok,
Unfortunately AFAIK, NVRAM partition holds the data for all the radios(like the uniqu IMEI number for telephony radios, other stuff for Wifi and Bluetooth etc.), and it's unique for every device, so if you didn't back it up, sorry - your device has turned into a very expensive brick.
Should you manage to get it through repairs, warranty(who am I kidding, your warranty is void because of flashing it) or non-warranty, back up the NVRAM next time you format your device.
@tambok_15 bro you should be able to find your wifi, bluetooth, imei, etc code for you device on the box of that phone the day you purchased it. It should be written on one of the sides. (Screenshot below)(i erased mine)
After you find the device-specific code on the box, you can then flash it into your nvram via SN Write tool (just google it) just make sure to have the correct drivers as well. You can also find a tutorial on how to use sn write tool on the forum hovatek.
I am not 100% sure this will fix the phone entirely but it's worth a shot. Good luck.
Edit: If your problem is related to baseband i don't know about it maybe you can find a solution on google . . .
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
sk3lt said:
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
Click to expand...
Click to collapse
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
otonieru said:
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
Click to expand...
Click to collapse
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
sk3lt said:
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
Click to expand...
Click to collapse
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
otonieru said:
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
Click to expand...
Click to collapse
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
sk3lt said:
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
Click to expand...
Click to collapse
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
otonieru said:
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
Click to expand...
Click to collapse
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
sk3lt said:
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
Click to expand...
Click to collapse
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
sk3lt said:
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
Click to expand...
Click to collapse
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
tsongming said:
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
Click to expand...
Click to collapse
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
sk3lt said:
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
Click to expand...
Click to collapse
use testpoint method, and flash it using QFIL.
otonieru said:
use testpoint method, and flash it using QFIL.
Click to expand...
Click to collapse
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
sk3lt said:
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
Click to expand...
Click to collapse
root cause of your issue is that you play with wrong qcn and messed up the nv,
wince you cant plugged to qpst, you need someone to make EFS backup for you torestore from twrp
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
How can I do this? Can you help me please?
jokerm90 said:
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
Click to expand...
Click to collapse
How can I do this? Can you help me please?
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
sk3lt said:
How can I do this? Can you help me please?
Click to expand...
Click to collapse
You need backup EFS and Modem via TWRP first(better with OrangeFox). After you need Magisk first and some manipulation with QCN file via QPST. I will write it later
MohamedYousri said:
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
Click to expand...
Click to collapse
Maui Meta is for MTK cpu phones. You need QPST
Note 8 Pro is MTK Device
Hello! I lost IMEI and got NVRAM Warning after flashing Redmi 9 with SP Flash Tool. I tried lots of programs to repair it like Maui Meta, SN Write Tool etc. But I can't get the drivers working properly. Are there any other ways to repair it? If there are, could you please help me to get it working? I feel like I'm already about to surrender...
me_smart34 said:
Hello! I lost IMEI and got NVRAM Warning after flashing Redmi 9 with SP Flash Tool. I tried lots of programs to repair it like Maui Meta, SN Write Tool etc. But I can't get the drivers working properly. Are there any other ways to repair it? If there are, could you please help me to get it working? I feel like I'm already about to surrender...
Click to expand...
Click to collapse
No you can not..
You need mirrakel box or like this box to fix imei....i wander why you flash rom with sp??
Shas45558 said:
No you can not..
You need mirrakel box or like this box to fix imei....i wander why you flash rom with sp??
Click to expand...
Click to collapse
Thank you for a response! I used sp because i hardbricked my phone...
me_smart34 said:
Thank you for a response! I used sp because i hardbricked my phone...
Click to expand...
Click to collapse
Hmm..i think you erase and update your device and if you do so it is a wrong steps...when use sp you need to check update framware option
Shas45558 said:
Hmm..i think you erase and update your device and if you do so it is a wrong steps...when use sp you need to check update framware option
Click to expand...
Click to collapse
The problem is that i checked "firmware upgrade" and it's all erased anyway. I've read this is a common problem when you use sp you lose imei and stuff. I would fix this in a few minutes but this stupid drivers...just can't get them working...
me_smart34 said:
The problem is that i checked "firmware upgrade" and it's all erased anyway. I've read this is a common problem when you use sp you lose imei and stuff. I would fix this in a few minutes but this stupid drivers...just can't get them working...
Click to expand...
Click to collapse
Without imei is it possible to unlock bootloader or root your devices
me_smart34 said:
Hello! I lost IMEI and got NVRAM Warning after flashing Redmi 9 with SP Flash Tool. I tried lots of programs to repair it like Maui Meta, SN Write Tool etc. But I can't get the drivers working properly. Are there any other ways to repair it? If there are, could you please help me to get it working? I feel like I'm already about to surrender...
Click to expand...
Click to collapse
If you didn't backup your IMEI before you lost it, probably you will never can recover both of imei.
But, you can recover one of them.
You need to write the IMEI to any (newer) device that allow imei writing. (Redmi Note 8 Pro can does it.)
And then, making the imei 1 as empty/null and into imei 2 you can write your new imei.
After it, you can backup the nvdata from that phone and restore it to your device.
So, you will have only imei 2. If you try to write imei 1 too, your device will get nvdata corrupted.
Good luck.
me_smart34 said:
The problem is that i checked "firmware upgrade" and it's all erased anyway. I've read this is a common problem when you use sp you lose imei and stuff. I would fix this in a few minutes but this stupid drivers...just can't get them working...
Click to expand...
Click to collapse
If you lost your imei, definitely you didn't make a firmware upgrade, but a format all.
Shas45558 said:
Without imei is it possible to unlock bootloader or root your devices
Click to expand...
Click to collapse
Yes, you can.
But you need a sim card from an operator that doesn't require the imei for using its service.
And obviously, you need your baseband intact.
If you try a sim card from an operator that requires imei for using its service, the sim card will not be registered.
If you want to restore the state of UNLOCKED BOOTLOADER, you need to follow this guide: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
VD171 said:
If you didn't backup your IMEI before you lost it, probably you will never can recover both of imei.
But, you can recover one of them.
You need to write the IMEI to any (newer) device that allow imei writing. (Redmi Note 8 Pro can does it.)
And then, making the imei 1 as empty/null and into imei 2 you can write your new imei.
After it, you can backup the nvdata from that phone and restore it to your device.
So, you will have only imei 2. If you try to write imei 1 too, your device will get nvdata corrupted.
Good luck.
If you lost your imei, definitely you didn't make a firmware upgrade, but a format all.
Yes, you can.
But you need a sim card from an operator that doesn't require the imei for using its service.
And obviously, you need your baseband intact.
If you try a sim card from an operator that requires imei for using its service, the sim card will not be registered.
If you want to restore the state of UNLOCKED BOOTLOADER, you need to follow this guide: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Click to expand...
Click to collapse
I just found out that mi flash pro shows my IMEIs when I connect my phone in recovery mode. Could it be possibly happening because of the new firmware and I just need to flash into something different than global version or I'm wrong somewhere?
me_smart34 said:
I just found out that mi flash pro shows my IMEIs when I connect my phone in recovery mode. Could it be possibly happening because of the new firmware and I just need to flash into something different than global version or I'm wrong somewhere?
Click to expand...
Click to collapse
No. It will never write or recover your IMEI.
Accidently got the drivers working. Then i tried using maui meta and sn write tool to fix imei but i got errors. For example maui meta says "Write to target failed" and sn gives something like timeout error. Never felt that close...
me_smart34 said:
Accidently got the drivers working. Then i tried using maui meta and sn write tool to fix imei but i got errors. For example maui meta says "Write to target failed" and sn gives something like timeout error. Never felt that close...
Click to expand...
Click to collapse
Unhappy, maui meta can't help you.
You need to follow the guide I've sent for recovering only imei 2.
Good luck
VD171 said:
But, you can recover one of them.
You need to write the IMEI to any (newer) device that allow imei writing. (Redmi Note 8 Pro can does it.)
And then, making the imei 1 as empty/null and into imei 2 you can write your new imei.
After it, you can backup the nvdata from that phone and restore it to your device.
So, you will have only imei 2. If you try to write imei 1 too, your device will get nvdata corrupted.
Click to expand...
Click to collapse
if use an older device? eg Redmi Note 4. Will this work? p. s english, not my language
Slaventei2 said:
if use an older device? eg Redmi Note 4. Will this work? p. s english, not my language
Click to expand...
Click to collapse
I'm not sure, sorry. I'm sure only for Redmi Note 8 Pro.
You can try and then tell us the result too
Is it possible ? I found a program which name is DFT Pro to repair but I couldn't find all supported devices list from software ?
You haven't necessary lost the IMEI. You can try `fastboot flash modem modem.img` (you'd need to extract it from payload.bin first) from the ROM that you've installed (or just flash complete rom using rollback images from anroid 13 beta, but it'll wipe your data)
From my experience, fastboot on 1+10pro is messed up and sometimes it doesn't flash some partitions
Dj_Krip said:
You haven't necessary lost the IMEI. You can try `fastboot flash modem modem.img` (you'd need to extract it from payload.bin first) from the ROM that you've installed (or just flash complete rom using rollback images from anroid 13 beta, but it'll wipe your data)
From my experience, fastboot on 1+10pro is messed up and sometimes it doesn't flash some partitions
Click to expand...
Click to collapse
imei is specific to the device. it's not in the payload.bin file
g96818 said:
imei is specific to the device. it's not in the payload.bin file
Click to expand...
Click to collapse
The device won't load imei if modem is broken. On this device the code responsible for modem configuration is on `modem` partition. imei is stored elsewhere, but the device can still show "null" instead of imei if the modem is not loaded correctly
A friend of mine tried with UMT pro dongle and it was unsuccessful I think CPU is not supported yet.
This model not support
Some news guys ?
i tried with miracle thunder which said imei repaired successfully but in fact nothing happened when i check the phone. its due to oxygenOS 12. very restricted.
dasche said:
i tried with miracle thunder which said imei repaired successfully but in fact nothing happened when i check the phone. its due to oxygenOS 12. very restricted.
Click to expand...
Click to collapse
A friend of mine tried with the latest UMT pro version, and same : Software told IMEI was changed, reboot of the phone and...IMEI is still the same old. Are you sure it's due to Oxygen OS and not the CPU itself ? UMT pro support IMEI Repair on OP9PRO.
Nixeus2 said:
A friend of mine tried with the latest UMT pro version, and same : Software told IMEI was changed, reboot of the phone and...IMEI is still the same old. Are you sure it's due to Oxygen OS and not the CPU itself ? UMT pro support IMEI Repair on OP9PRO.
Click to expand...
Click to collapse
Not sure but most probably.
Any update on IMEI repair of oneplus 10 pro ?
No, there is a new version of UMT pro since few days but still no support for OP 10 PRO !
Use the rollback package..at least try starting over, don't attempt to mod your online to reflect your IMEI manually.
Just rollback, if it works then great if not then RMA it.
IIRC there used to be an EFS partition I believe it was called that housed the IMEI numbers on the device.
Things may have changed but if not then without a back up, it wont work.
Rollback then RMA if it doesn't work.
Hello everyone , I have heard that oneplus 10 pro IMEI repair is possible now with latest update in flashing tools like QPST or UMT pro but I am not sure , just confirm me that I can repair/change IMEI of oneplus 10 pro? , I would appreciate your reply and time . THANKS
kang_the_conquerer said:
Hello everyone , I have heard that oneplus 10 pro IMEI repair is possible now with latest update in flashing tools like QPST or UMT pro but I am not sure , just confirm me that I can repair/change IMEI of oneplus 10 pro? , I would appreciate your reply and time . THANKS
Click to expand...
Click to collapse
Change IMEI? Not sure that's even legal buddy, but restoring it I believe you can restore an EFS partition , if that's even where it's still kept.. haven't used those tools before.
dladz said:
Change IMEI? Not sure that's even legal buddy, but restoring it I believe you can restore an EFS partition , if that's even where it's still kept.. haven't used those tools before.
Click to expand...
Click to collapse
I wrote CHANGE because my IMEIs are Null and I bought it online from a seller without box and during root I lost IMEIs so thats why I am asking if I can put any other IMEIs if I can't restore the original.
kang_the_conquerer said:
I wrote CHANGE because my IMEIs are Null and I bought it online from a seller without box and during root I lost IMEIs so thats why I am asking if I can put any other IMEIs if I can't restore the original.
Click to expand...
Click to collapse
No need for capitals, you're the one asking for help.
Some literature from a previous thread on the legalities of changing an IMEI.
IMEI change and legality, mods please read
Good afternoon mods, I'm sorry but I had to open a thread about this topic again. It's absolutely not illegal to change your IMEI in most of the world. For instance, it's completely legal in the entirety of the US (see...
forum.xda-developers.com
If your phones legit then it's a case of restoration, not change..
Your device is under warranty, send it back.
kang_the_conquerer said:
I wrote CHANGE because my IMEIs are Null and I bought it online from a seller without box and during root I lost IMEIs so thats why I am asking if I can put any other IMEIs if I can't restore the original.
Click to expand...
Click to collapse
Lol u cant fix it back without backup
By the way how you wipe it? I mean imei become to 0?
As far as i read, the latest UMT pro build still doesn't support OP10 pro ! OP8PRO, OP9PRO.
Nixeus2 said:
As far as i read, the latest UMT pro build still doesn't support OP10 pro ! OP8PRO, OP9PRO.
Click to expand...
Click to collapse
Hi, sorry for unrelated question but, UMT pro can be used without the dongle?
Hello guys, after some struggle trying to unbrick my poco m3 pro, i faced a new probem, my IMEI has gone, as a noob that i am, i didn't made any kind of backup, i'm trying alot of ways, and still i didn't had any luck to re-write my IMEI (i still jave the numbem on the box of the phone) to the device, i'm using linux, almost everything that i found is to windows, does jave any kind of tool for linux, or i'll have to put windows on my laptop just for this porpouse?
there is anychance to use mtkdrive tool, the same used to bypass security for sp tools to do this ?
thanks for now
if your mobile services works, write imei is not necessary. and it's a dangerous operation. so if your devices now works fine, my suggestion is DON'T TOUCH ANYTHING
all my old phones that after modding lost originals imei worked without problems
a mobile sim could work also with all imei numbers=0
sadly my mobile service don't work, i keep zero signal, and when i try to get IMEI numbers on Settings > About device, it says unknown on both IMEis
ok
first try your sim into another device to be sure is not damaged
second search xiaomi redmi note 10 5g fastboot engineering rom and flash. this rom should repair some high problems like your.
if boot and all work fine, update to miui13. good luck
wetito said:
ok
first try your sim into another device to be sure is not damaged
second search xiaomi redmi note 10 5g fastboot engineering rom and flash. this rom should repair some high problems like your.
if boot and all work fine, update to miui13. good luck
Click to expand...
Click to collapse
thx, i'll try to find that rom, i already tried my sim on another devices, and works flawless
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
MTK IMEI Repair Tool Download (All Version) Updated 2022 | Mi Account Guide
When you have an MKT Android device, you can use an MTK IMEI Tool to flash or repair IMEI on your device. In order to make your damaged device functional
miaccountguide.com
i found this tool... maybe should work. but u had to test by yourself... this website have other utility that u could try. but now u have signal? data mobile?
wetito said:
MTK IMEI Repair Tool Download (All Version) Updated 2022 | Mi Account Guide
When you have an MKT Android device, you can use an MTK IMEI Tool to flash or repair IMEI on your device. In order to make your damaged device functional
miaccountguide.com
i found this tool... maybe should work. but u had to test by yourself... this website have other utility that u could try. but now u have signal? data mobile?
Click to expand...
Click to collapse
in mtk without box/server patch only sim 2 repair
Yonecloud said:
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
Click to expand...
Click to collapse
not work nv data/ram with out patch firmware ect,you only can return imei 2 for original.
shinobusensui said:
not work nv data/ram with out patch firmware ect,you only can return imei 2 for original.
Click to expand...
Click to collapse
U tryed put SIM on slot 2 with imei2 restored? Coul be a solution? Could u post a screenshot of phone information? (Tap 4 time internal storage
wetito said:
U tryed put SIM on slot 2 with imei2 restored? Coul be a solution? Could u post a screenshot of phone information? (Tap 4 time internal storage
Click to expand...
Click to collapse
its only information and you can use Maui Meta in Meta mode if you enter edl/testpoint, for me the first time lost two imei only return The Second imei, but send to waranty and change the Phone.
of coursed use a Semi Profesional Tools.
Did you find a fix? And where did you go wrong? Please let us know the mistakes you made so that we don't.
shinobusensui said:
its only information and you can use Maui Meta in Meta mode if you enter edl/testpoint, for me the first time lost two imei only return The Second imei, but send to waranty and change the Phone.
of coursed use a Semi Profesional Tools.
Click to expand...
Click to collapse
ok, so at least one of yours sims work. goog luck
Yonecloud said:
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
Click to expand...
Click to collapse
can i ask where did you get the eng rom?