Database Develop

How to repair IMEI ?

Hi Guys,
Here is my case.
Phone: Samsung Galaxy 3 LTE I9305 – Optus Branded.
I have done the following mistakes:
1- I flashed I9300 ROM not I9305.
2- Then I tried selecting NAND Erase all from Odin3.
3- Then I tried to re-flash the rom by selecting PHONE not PDA.
The total damage is:
Phone: Unknown
RF CAL Date: Unknown
BaseBand version: Unknown
So I think I lost the IMEI , I have no backup for it. So I have no network connection anymore.
I was able to:
1- To restore the stock rom.
2- Install Triangle away and clear the counter and the status back official.
I tried the following solutions to recover the IMEI, but it didn’t work out:
1- To flash the Param_Bin_I9305.tar.
2- I tried to use EFS Pro to recover and repair the IMEI.
3- I tried NV-items_reader_writer and QPST but:
a- The COM status NO Phone in both apps.
b- I was not able to see the option “RMNET + DM + MODEM ” under Qualcomm USB Settings. I can see RNDIS + DM + MODEM and others and they didn’t help.
I think I tried all solutions provided in the forum , I would appreciate your advice on this.
Cheers,

mahmoudissam said:
Hi Guys,
Here is my case.
Phone: Samsung Galaxy 3 LTE I9305 – Optus Branded.
I have done the following mistakes:
1-I flashed I9300 ROM not I9305.
2-Then I tried selecting NAND Erase all from Odin3.
3-Then I tried to re-flash the rom by selecting PHONE not PDA.
The total damage is:
Phone: Unknown
RF CAL Date: Unknown
BaseBand version: Unknown
So I think I lost the IMEI , I have no backup for it. So I have no network connection anymore.
I was able to:
1-To restore the stock rom.
2-Install Triangle away and clear the counter and the status back official.
I tried the following solutions to recover the IMEI, but it didn’t work out:
1-To flash the Param_Bin_I9305.tar.
2-I tried to use EFS Pro to recover and repair the IMEI.
3-I tried NV-items_reader_writer and QPST but:
a-The COM status NO Phone in both apps.
b-I was not able to see the option “RMNET + DM + MODEM ” under Qualcomm USB Settings. I can see RNDIS + DM + MODEM and others and they didn’t help.
I think I tried all solutions provided in the forum , I would appreciate your advice on this.
Cheers,
Click to expand...
Click to collapse
Nand erase was a bad idea as this would have erased all your efs area also including your mac addresses for bluetooth and wifi. So the problem runs alot deeper and is far more serious.
Best thing to do is warranty replacement. Had you have not selected nand erase I could have recovered your device for you.
Sent from my GT-I9305 using Tapatalk 2

Hi lyriquidperfection,
Thank you for your response.
1- Actually I'm able to connect to WIFI and Bluetooth, So do you think the erase was not successful? Do you see any luck?
2- I took Kies backup for all items just before I did the mistakes, does it help?
Thank You.
lyriquidperfection said:
Nand erase was a bad idea as this would have erased all your efs area also including your mac addresses for bluetooth and wifi. So the problem runs alot deeper and is far more serious.
Best thing to do is warranty replacement. Had you have not selected nand erase I could have recovered your device for you.
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse

mahmoudissam said:
Hi lyriquidperfection,
Thank you for your response.
1- Actually I'm able to connect to WIFI and Bluetooth, So do you think the erase was not successful? Do you see any luck?
2- I took Kies backup for all items just before I did the mistakes, does it help?
Thank You.
Click to expand...
Click to collapse
I removed the IMEI from one Mobile to remove the SIM lock I still can call and use the mobile like before
TWRP Recovery can Backup EFS what recovery do you use?
Maybe you can generate your own efs area the IMEI should print inside the mobile

Hi frogfire,
Thank you for the info!
Actually I tried to do that using QPST but:
a-The COM status is NO Phone when I connect the phone.
b- I was not able to see the option “RMNET + DM + MODEM ” under Qualcomm USB Settings. I can see RNDIS + DM + MODEM and other options which dont help.
Any idea?
Cheers,

Any help guys?

take it to service

I took it to service and they wanna change the motherboard , is that the only option they have??

Ask them - they're the pros

mahmoudissam said:
I took it to service and they wanna change the motherboard , is that the only option they have??
Click to expand...
Click to collapse
Well you did wipe the NAND, nothing else you can do

Im not sure that NAND has been wiped successfully , because I can access the download option and the wifi is working.
Do you think it has been wiped and require a new motherboard?

mahmoudissam said:
Im not sure that NAND has been wiped successfully , because I can access the download option and the wifi is working.
Do you think it has been wiped and require a new motherboard?
Click to expand...
Click to collapse
You won't get more qualified help than from Samsung here. Exchange the board.

Thanks guys for the help anyway, I sent it to other service center, lets see how it goes.

So if they changed the main board, doesnt mean I will get new IMEI code for my phone?

mahmoudissam said:
So if they changed the main board, doesnt mean I will get new IMEI code for my phone?
Click to expand...
Click to collapse
Yes you will.
Sent from my GT-I9305 using Tapatalk 2

Hey liquidperfection. I have the same problem with no phone connected. I have not done a nand wipe. Is there any chance to get my baseband back
Sent from my GT-I9305 using xda app-developers app

winxuser said:
Hey liquidperfection. I have the same problem with no phone connected. I have not done a nand wipe. Is there any chance to get my baseband back
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Without a backup, not much.
The time to think about your IMEI number is BEFORE doing any flashing or modification to your device. Backing this up really should be the first thing anyone does before jumping into the fray.
Without a proper backup, you have an expensive media player.

going out on a whim here,, are we able to use someone elses backup to atleast get the stuff back then change the imei to our devices one?

winxuser said:
going out on a whim here,, are we able to use someone elses backup to atleast get the stuff back then change the imei to our devices one?
Click to expand...
Click to collapse
no

damn

[Q] Urgent help likely hardbrick D:

Hi guys I have a problem, I had in my hands a p7 of an old owner who does not know how he had cleared the imei and the cell did not take more, never mind if it could not restore it I would have used only with wifi but last night in an attempt to insert a hypothetical backup imei think I damaged part of the system and the bootloader because now the phone in question after the restart does not turn any more, and the LED flashes twice green then red twice and twice again green
Any key combination I try not do anything and if I connect it to the PC is detected with an unknown device name in Chinese ._. how can I rearrange the tuttooo ?? you help me prrgo T.T
thanks in advance to everyone I apologize if I had to put it in the post modding but I'm not sure where it belongs thanks

No one can help me?? D:

Do you have adb installed on your pc?
If so, is it working and does it show the serial number of the phone when typing adb devices?

darklife96 said:
No one can help me?? D:
Click to expand...
Click to collapse
Depends on how you were trying to restore imei. Describe step by step what have you done?

i've use 5iromtoolbox on my p7 with root and flash a corrupt imei backup (i think it was of another huawei phone) i don't think it can be bring at hardbrick :'(

P7 keeps imei in other partition than 5iromtoolbox makes backup of. Shortly, if you could make backup with this tool before and then try to restore it, you were just reflash some partition without any affect on imei but and without any consequences for device. But you have flashed partition from absolutely other device...
Blinking led means that some partition is corrupted or even maybe partition table. If it could be some partition that can be reflashed via fastboot, you could have a chance to unbrick it. But it's not.
Now the only way to unbrick it - is full reflash of whole memory using some manufacturer's hardware tool. So you're right, it's hardbricked.
Bring it to service. But I presume they will you offer replace of whole board that is comparable with price of the new device.

yes...there isn't no solution to flash new partition unless hardware flash tool? or ther is a guide to flash it (i think no)?

nv data corrupted

Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?

sk3lt said:
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
Click to expand...
Click to collapse
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.

otonieru said:
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
Click to expand...
Click to collapse
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?

sk3lt said:
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
Click to expand...
Click to collapse
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?

otonieru said:
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
Click to expand...
Click to collapse
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.

sk3lt said:
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
Click to expand...
Click to collapse
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.

otonieru said:
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
Click to expand...
Click to collapse
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?

sk3lt said:
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
Click to expand...
Click to collapse
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.

tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?

sk3lt said:
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
Click to expand...
Click to collapse
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.

tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
tsongming said:
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
Click to expand...
Click to collapse
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned

sk3lt said:
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
Click to expand...
Click to collapse
use testpoint method, and flash it using QFIL.

otonieru said:
use testpoint method, and flash it using QFIL.
Click to expand...
Click to collapse
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?

sk3lt said:
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
Click to expand...
Click to collapse
root cause of your issue is that you play with wrong qcn and messed up the nv,
wince you cant plugged to qpst, you need someone to make EFS backup for you torestore from twrp

You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work

How can I do this? Can you help me please?

jokerm90 said:
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
Click to expand...
Click to collapse
How can I do this? Can you help me please?

Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.

sk3lt said:
How can I do this? Can you help me please?
Click to expand...
Click to collapse
You need backup EFS and Modem via TWRP first(better with OrangeFox). After you need Magisk first and some manipulation with QCN file via QPST. I will write it later
MohamedYousri said:
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
Click to expand...
Click to collapse
Maui Meta is for MTK cpu phones. You need QPST

Note 8 Pro is MTK Device

Question Help with an unbricked Poco M3 Pro

Hello guys, after some struggle trying to unbrick my poco m3 pro, i faced a new probem, my IMEI has gone, as a noob that i am, i didn't made any kind of backup, i'm trying alot of ways, and still i didn't had any luck to re-write my IMEI (i still jave the numbem on the box of the phone) to the device, i'm using linux, almost everything that i found is to windows, does jave any kind of tool for linux, or i'll have to put windows on my laptop just for this porpouse?
there is anychance to use mtkdrive tool, the same used to bypass security for sp tools to do this ?
thanks for now

if your mobile services works, write imei is not necessary. and it's a dangerous operation. so if your devices now works fine, my suggestion is DON'T TOUCH ANYTHING
all my old phones that after modding lost originals imei worked without problems
a mobile sim could work also with all imei numbers=0

sadly my mobile service don't work, i keep zero signal, and when i try to get IMEI numbers on Settings > About device, it says unknown on both IMEis

ok
first try your sim into another device to be sure is not damaged
second search xiaomi redmi note 10 5g fastboot engineering rom and flash. this rom should repair some high problems like your.
if boot and all work fine, update to miui13. good luck

wetito said:
ok
first try your sim into another device to be sure is not damaged
second search xiaomi redmi note 10 5g fastboot engineering rom and flash. this rom should repair some high problems like your.
if boot and all work fine, update to miui13. good luck
Click to expand...
Click to collapse
thx, i'll try to find that rom, i already tried my sim on another devices, and works flawless

so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files

MTK IMEI Repair Tool Download (All Version) Updated 2022 | Mi Account Guide
When you have an MKT Android device, you can use an MTK IMEI Tool to flash or repair IMEI on your device. In order to make your damaged device functional
miaccountguide.com
i found this tool... maybe should work. but u had to test by yourself... this website have other utility that u could try. but now u have signal? data mobile?

wetito said:
MTK IMEI Repair Tool Download (All Version) Updated 2022 | Mi Account Guide
When you have an MKT Android device, you can use an MTK IMEI Tool to flash or repair IMEI on your device. In order to make your damaged device functional
miaccountguide.com
i found this tool... maybe should work. but u had to test by yourself... this website have other utility that u could try. but now u have signal? data mobile?
Click to expand...
Click to collapse
in mtk without box/server patch only sim 2 repair

Yonecloud said:
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
Click to expand...
Click to collapse
not work nv data/ram with out patch firmware ect,you only can return imei 2 for original.

shinobusensui said:
not work nv data/ram with out patch firmware ect,you only can return imei 2 for original.
Click to expand...
Click to collapse
U tryed put SIM on slot 2 with imei2 restored? Coul be a solution? Could u post a screenshot of phone information? (Tap 4 time internal storage

wetito said:
U tryed put SIM on slot 2 with imei2 restored? Coul be a solution? Could u post a screenshot of phone information? (Tap 4 time internal storage
Click to expand...
Click to collapse
its only information and you can use Maui Meta in Meta mode if you enter edl/testpoint, for me the first time lost two imei only return The Second imei, but send to waranty and change the Phone.
of coursed use a Semi Profesional Tools.

Did you find a fix? And where did you go wrong? Please let us know the mistakes you made so that we don't.

shinobusensui said:
its only information and you can use Maui Meta in Meta mode if you enter edl/testpoint, for me the first time lost two imei only return The Second imei, but send to waranty and change the Phone.
of coursed use a Semi Profesional Tools.
Click to expand...
Click to collapse
ok, so at least one of yours sims work. goog luck

Yonecloud said:
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
Click to expand...
Click to collapse
can i ask where did you get the eng rom?

Redmi Note 9 - How do I restore my IMEI? I don't have a backup of my nvram/nvdata but I have the numbers.

How do I write IMEI along with baseband version back to my phone? I really don't want to risk bricking it again, that's enough stress for me in the past two days
I heard that I can only flash IMEI 2 back to it, and if I want flashing IMEI 1 as well I'd need to install a custom rom on the phone. So if that's a solution I'd love if someone could help me with it. MIUI 13 is slow and laggy af (which is the reason I bricked the phone in the first place, to install a better ROM).
But here's something, when I flash the phone's firmware through fastboot, issues start to rise (as per my experience with it so far), but through SP Flash Tool, it's alright. So I'd love to know if installing custom ROMs using the tool would be alright, if not then if recovery is required or if fastboot is fit for the job. If that's an issue I'd love if someone could give me advice when it comes to it.
Old post 1: (not my current situation)
"Long story short, I bricked the phone and after months, I've finally been able to repair it (downgraded from MIUI 13 to MIUI 11), but I lost my IMEI. I have the phone's two IMEI numbers, but I could not find any tool to help me write it to the phone. Either that, or I don't know whether the phone should be turned on or off, or if there's any special mode that's required for that matter.
Help would really be appreciated."
Old post 2:
"It happened after manually installing engineering ROM on it, now I can only doubt it's BROM mode that's working and nothing else, but I'm not sure. SP Flash Tool doesn't want to work with the phone since I want to flash the stock rom back. I really need help please."

YLTN said:
Long story short, I bricked the phone and after months, I've finally been able to repair it (downgraded from MIUI 13 to MIUI 11), but I lost my IMEI. I have the phone's two IMEI numbers, but I could not find any tool to help me write it to the phone. Either that, or I don't know whether the phone should be turned on or off, or if there's any special mode that's required for that matter.
Help would really be appreciated.
Click to expand...
Click to collapse
Install Engineering ROM and then write imei using available tools.

mvikrant97 said:
Install Engineering ROM and then write imei using available tools.
Click to expand...
Click to collapse
I fear that if I install the ROM, the phone might brick again

YLTN said:
I fear that if I install the ROM, the phone might brick again
Click to expand...
Click to collapse
Why?

mvikrant97 said:
Why?
Click to expand...
Click to collapse
The reason why my phone broke in the first place was due to flashing a misc.bin file after following a YouTube tutorial. It was part of a process to download twrp on the phone unofficially. Since then I started looking for ways to fix it until I finally found a post that had to do with fixing nvdata corruption (which was the error I had prior to fixing the phone) which helped.
So yeah, I don't think I can trust flashing ROMs on my phone as much as before, but I'll still try the engineering ROM thing.

mvikrant97 said:
Why?
Click to expand...
Click to collapse
So um...it bricked. This time worse than before. It doesn't turn on at all no matter how long I press the power button. It was after I manually flashed eng rom.

YLTN said:
So um...it bricked. This time worse than before. It doesn't turn on at all no matter how long I press the power button. It was after I manually flashed eng rom.
Click to expand...
Click to collapse
Does it shows up in device manager?

mvikrant97 said:
Does it shows up in device manager?
Click to expand...
Click to collapse
Yep, it doesn't show up as it's name or "Android", it shows up as MediaTek USB Port (COM3), that's why I doubted it to be in BROM mode.

YLTN said:
Yep, it doesn't show up as it's name or "Android", it shows up as MediaTek USB Port (COM3), that's why I doubted it to be in BROM mode.
Click to expand...
Click to collapse
By the way, after trying to connect to it using mtkclient, I got this error:
DeviceClass - [LIB]: ←[31mCouldn't get device configuration.←[0m

YLTN said:
By the way, after trying to connect to it using mtkclient, I got this error:
DeviceClass - [LIB]: ←[31mCouldn't get device configuration.←[0m
Click to expand...
Click to collapse
Hold on, it worked now for some reason when I disconnected the battery, but it keeps connecting and disconnecting so that's an issue.
I'll try to reconnect the battery and see.

YLTN said:
Hold on, it worked now for some reason when I disconnected the battery, but it keeps connecting and disconnecting so that's an issue.
I'll try to reconnect the battery and see.
Click to expand...
Click to collapse
Please install LIB USB drivers.
Visit this tutorial here on xda

mvikrant97 said:
Please install LIB USB drivers.
Visit this tutorial here on xda
Click to expand...
Click to collapse
Bro, thank you so much, the phone's unbricked now. I couldn't believe my eyes
But for now, is there any solution for the IMEI problem?

YLTN said:
Bro, thank you so much, the phone's unbricked now. I couldn't believe my eyes
But for now, is there any solution for the IMEI problem?
Click to expand...
Click to collapse
I always recommend a NV Backup before messing up with your own device, that's all I know.
Download the file attached here but remember you can fix only second IMEI using this method. Please don't try to fix both IMEI or NV Data will be corrupted again.
Video Tutorial to Follow Video Tutorial

mvikrant97 said:
I always recommend a NV Backup before messing up with your own device, that's all I know.
Download the file attached here but remember you can fix only second IMEI using this method. Please don't try to fix both IMEI or NV Data will be corrupted again.
Video Tutorial to Follow Video Tutorial
Click to expand...
Click to collapse
The guy in the video is using MIUI 12, I have MIUI 13. I don't know if that's an issue but someone in the comments said something about MIUI or so. I'm not a professional but many times when I see tutorials they're very specific with the MIUI version.
Also, I'm not sure how to back up nv data, do I use mtkclient or is it somewhere in the attachment you sent me?
And one more thing, my phone's baseband version is unknown, could that affect the process?

YLTN said:
The guy in the video is using MIUI 12, I have MIUI 13. I don't know if that's an issue but someone in the comments said something about MIUI or so. I'm not a professional but many times when I see tutorials they're very specific with the MIUI version.
Also, I'm not sure how to back up nv data, do I use mtkclient or is it somewhere in the attachment you sent me?
And one more thing, my phone's baseband version is unknown, could that affect the process?
Click to expand...
Click to collapse
You don't need the backup anymore and you can follow the tutorial in the video irrespective of the MIUI version you have.
I have also attached the files that are used in the video.

mvikrant97 said:
You don't need the backup anymore and you can follow the tutorial in the video irrespective of the MIUI version you have.
I have also attached the files that are used in the video.
Click to expand...
Click to collapse
Alright then, I'll follow the steps and tell you the results once I'm done.

mvikrant97 said:
You don't need the backup anymore and you can follow the tutorial in the video irrespective of the MIUI version you have.
I have also attached the files that are used in the video.
Click to expand...
Click to collapse
The phone keeps rebooting when connecting it to Maui META. Like it shows META MODE at the bottom of the screen but then it turns off. Now it's bootlooping. I guess I'll have to flash MIUI on it again. At least I still have access to fastboot and recovery.
Update: NV Data corrupted after flashing MIUI, but I got a solution that hopefully works.
Update 2: After flashing MIUI 11 (along with some other nvdata and nvram files, i think they're just empty), it works now and the error is gone. But as I said IMEI issue's still there. Maybe I would need engineering ROM for this one? Although it bricked my phone before.
Also, the phone started bootlooping before attempting the Maui META thing, so maybe it's either the manual formatting of partitions or the files I flashed on it.

YLTN said:
The phone keeps rebooting when connecting it to Maui META. Like it shows META MODE at the bottom of the screen but then it turns off. Now it's bootlooping. I guess I'll have to flash MIUI on it again. At least I still have access to fastboot and recovery.
Update: NV Data corrupted after flashing MIUI, but I got a solution that hopefully works.
Update 2: After flashing MIUI 11 (along with some other nvdata and nvram files, i think they're just empty), it works now and the error is gone. But as I said IMEI issue's still there. Maybe I would need engineering ROM for this one? Although it bricked my phone before.
Also, the phone started bootlooping before attempting the Maui META thing, so maybe it's either the manual formatting of partitions or the files I flashed on it.
Click to expand...
Click to collapse
Try flashing the ENG rom and try fixing your IMEI

mvikrant97 said:
Try flashing the ENG rom and try fixing your IMEI
Click to expand...
Click to collapse
So I ran into another issue. it tells me I need "exaid-verified.img" and that verified boot is enabled, which is not present in the ENG ROM folder.

mvikrant97 said:
Try flashing the ENG rom and try fixing your IMEI
Click to expand...
Click to collapse
Btw one more thing, I can update my phone right? Like, it won't break my phone? I'm good with MIUI 11 but I wonder if updating it would fix baseband version.