I flashed SlimKat using Philz, and it's stuck on the flashing blue SlimKat logo. It's been stuck like this for a little over 10 minutes. I can still get it into recovery, and yes, I've already tried wiping Dalvik and cache. Any other suggestions?
tyvas97 said:
I flashed SlimKat using Philz, and it's stuck on the flashing blue SlimKat logo. It's been stuck like this for a little over 10 minutes. I can still get it into recovery, and yes, I've already tried wiping Dalvik and cache. Any other suggestions?
Click to expand...
Click to collapse
Ok here is the solution.
1)Make sure your files are complete
2)Try it with TWRP recovery latest version
Even if you are using Philz or TWRP,
1)Try to advance wipe system, data, cache
2)Then flash the files
3)wipe dalvik cache
Cheers​
Related
Every time I flash any 4.2.2 rom the install appears to go fine but afterwords it says that it cannot read the cache in cwm then when I reboot to try the rom it just stays on the bootloader unlock screen. I have flashed many roms in the past and never had any issues. I have tried fastboot flashing MR and rsdlite back to ATT stock along with rewriting Epinters cwm and switching to mattlegroffs cwm but the same thing happens. But I am able to flash xperiamod and holoblur without issue. Scratching my head on this one anybody got any ideas.
Are you making sure to clear cache and dalvik cache?
sent from my PACman Atrix HD
Kohwali said:
Are you making sure to clear cache and dalvik cache?
sent from my PACman Atrix HD
Click to expand...
Click to collapse
always
frog1982 said:
always
Click to expand...
Click to collapse
For some ROMs you may need to clear the caches before and after installation. Just a heads up.
Are you saying you're stuck in the "bootloader is unlocked" screen after any installation of a ROM?
In that case are you making sure to do system wipe before installing?
Kohwali said:
For some ROMs you may need to clear the caches before and after installation. Just a heads up.
Are you saying you're stuck in the "bootloader is unlocked" screen after any installation of a ROM?
In that case are you making sure to do system wipe before installing?
Click to expand...
Click to collapse
I always wipe data, cache, dalvik, and system before any ROM flash but I have not tried wiping the cache after install I will try that when I get a chance.
update: tried wiping cache after install and the same thing happen but instead i unmounted the cache before install and it booted
Make sure you aren't using safestrap recovery.
Sent from my Atrix HD
I did everything right exceept for forgeting to wipe the data, now its stuck at boot, the cyanogenmod logo just stays on the screen spinning. Not sure whst to do. I tried wiping the data/factory reset through android recovery but that didnt work so I'm ouot of ideas
jarentzen3 said:
I did everything right exceept for forgeting to wipe the data, now its stuck at boot, the cyanogenmod logo just stays on the screen spinning. Not sure whst to do. I tried wiping the data/factory reset through android recovery but that didnt work so I'm ouot of ideas
Click to expand...
Click to collapse
How long did you let to boot logo spin? It can take a while before it gets past that the first time you run it.
Have you wiped cache and dalvik cache? Those usually fix the issue. You could also try fixing permissions to see if that helps too.
When you say you wiped in android recovery, do you mean safestrap?
jarentzen3 said:
I did everything right exceept for forgeting to wipe the data, now its stuck at boot, the cyanogenmod logo just stays on the screen spinning. Not sure whst to do. I tried wiping the data/factory reset through android recovery but that didnt work so I'm ouot of ideas
Click to expand...
Click to collapse
if I'm right, you should wipe in the custom recovery instead of stock recovery.
Hey,
I got little problem and I need some help. I wanted to falsh OMNI AsylumKANG (from thread http://forum.xda-developers.com/showthread.php?t=2591479 ) , but my n7000 failed to start system. Instead after samsung logo it restarted into twrp screen.My version number is N7000XXLT9. These are steps I made:
1. using stock recovery I flashed PhilZ-cwm6-XXLT9-ORA-5.11.2-signed
2. then launched and rebooted into PhilZ recovery
3. flashed raw_kernel_r4_j43 and reboot into recovery
4. wiped data, cache partition and dalvik cache
7. flashed AsylumKANG_4.4.2_n7000_Build2.2
8. flashed pa_gapps-modular-mini-4.4.2-20140111-signed
9. flashed UPDATE-SuperSU-v1.86
10. reboot
Afterwards as I said phoned showed samsung logo and rebooted itself to twrp recovery
What is problem here?
Thanks for help.
Should reflash Philz. Go to wipe/factory reset menu, then choose clean to install rom. Then go to advanced, wipe dalvik cache. Then reflash raw5, then flask rom.
Sent from my phone.
forest1971 said:
Should reflash Philz. Go to wipe/factory reset menu, then choose clean to install rom. Then go to advanced, wipe dalvik cache. Then reflash raw5, then flask rom.
Sent from my phone.
Click to expand...
Click to collapse
Thanks for idea but I didn't help I flashed stock rom, then Philz then clean to install rom, wipe dalvik cache and the rest is just like from step 3 down. Same issue. I flashed once again stock rom and Philz, but this time installed paranoid android 3+ (pa_n7000-3.99-RC2-20131012). It worked. Maybe I just wait for more kitkat 4.4 based rom releases and then try.
After flash r5 you need to boot into recovery before proceed with lashing rom. Make sure you have done that step.
Sent from my phone.
forest1971 said:
After flash r5 you need to boot into recovery before proceed with lashing rom. Make sure you have done that step.
Sent from my phone.
Click to expand...
Click to collapse
After flash r4 i boot into recovery. You're saying to flash r5 instead of r4?
Was flashing my friends i9305 and now it wont boot any rom I flash... always gets stuck on the first boot screen until I take out battery.
I flashed CWM 6.0.4.7 using odin.
I have tried flashing several roms (CM 11, CM 10.1, PACman 4.3)... Each one will flash with no errors, then when I reboot after correct GAPPS it just gets stuck on the loading screen forever and won't boot up into ROM.
Wipe data/cache, wipe dalvik, wipe system > Install rom from zip, install GAPPS from zip > reboot (even here I wipe system/data/cache - still doesnt work).
Any ideas on why it won't load up the roms....
only4dank said:
Was flashing my friends i9305 and now it wont boot any rom I flash... always gets stuck on the first boot screen until I take out battery.
I flashed CWM 6.0.4.7 using odin.
I have tried flashing several roms (CM 11, CM 10.1, PACman 4.3)... Each one will flash with no errors, then when I reboot after correct GAPPS it just gets stuck on the loading screen forever and won't boot up into ROM.
Wipe data/cache, wipe dalvik, wipe system > Install rom from zip, install GAPPS from zip > reboot (even here I wipe system/data/cache - still doesnt work).
Any ideas on why it won't load up the roms....
Click to expand...
Click to collapse
I have same problem here.. no one help me... I dont know I was in i9000 thread and lot of time I got answers.. miss that thread so much .
1Ishara said:
I have same problem here.. no one help me... I dont know I was in i9000 thread and lot of time I got answers.. miss that thread so much .
Click to expand...
Click to collapse
Well I figured it out... since it was never flashed or anything before (from stock rom)... I just went into the Mounts and Storage menu, and formated /cache /system /data manually and it finally worked.
Hope that helps
After installing latest cm11 my phone cant boot into recovery. Or cant boot the rom, even the boot logo of cm doesnt show up.
What i did before;
-Wiped system/cache/data (all f2fs)
-Flashed the latest cm11
-Wiped dalvik cache and boot
-After doing first config. Realized i didnt flash gapps
-Boot into recovery wipe system/data/cache
-Flash rom again, and latest pa gapps, wipe dalvik
-Boom, phone wont boot and cant get boot into recovery.
Tried flashing twrp via odin, latest cm11 with odin and neither of them worked. Can someone help me, please? Thank you.
heithered said:
After installing latest cm11 my phone cant boot into recovery. Or cant boot the rom, even the boot logo of cm doesnt show up.
What i did before;
-Wiped system/cache/data (all f2fs)
-Flashed the latest cm11
-Wiped dalvik cache and boot
-After doing first config. Realized i didnt flash gapps
-Boot into recovery wipe system/data/cache
-Flash rom again, and latest pa gapps, wipe dalvik
-Boom, phone wont boot and cant get boot into recovery.
Tried flashing twrp via odin, latest cm11 with odin and neither of them worked. Can someone help me, please? Thank you.
Click to expand...
Click to collapse
You wiped the system right? So you fkd up your phone. Never wipe the system.
mauam said:
You wiped the system right? So you fkd up your phone. Never wipe the system.
Click to expand...
Click to collapse
Whats wrong with wiping system before flashing a rom?
heithered said:
Whats wrong with wiping system before flashing a rom?
Click to expand...
Click to collapse
Don't know, I only remember a old advice from an old friend here, that's it. I never wiped the system, though. Good luck bud