After installing latest cm11 my phone cant boot into recovery. Or cant boot the rom, even the boot logo of cm doesnt show up.
What i did before;
-Wiped system/cache/data (all f2fs)
-Flashed the latest cm11
-Wiped dalvik cache and boot
-After doing first config. Realized i didnt flash gapps
-Boot into recovery wipe system/data/cache
-Flash rom again, and latest pa gapps, wipe dalvik
-Boom, phone wont boot and cant get boot into recovery.
Tried flashing twrp via odin, latest cm11 with odin and neither of them worked. Can someone help me, please? Thank you.
heithered said:
After installing latest cm11 my phone cant boot into recovery. Or cant boot the rom, even the boot logo of cm doesnt show up.
What i did before;
-Wiped system/cache/data (all f2fs)
-Flashed the latest cm11
-Wiped dalvik cache and boot
-After doing first config. Realized i didnt flash gapps
-Boot into recovery wipe system/data/cache
-Flash rom again, and latest pa gapps, wipe dalvik
-Boom, phone wont boot and cant get boot into recovery.
Tried flashing twrp via odin, latest cm11 with odin and neither of them worked. Can someone help me, please? Thank you.
Click to expand...
Click to collapse
You wiped the system right? So you fkd up your phone. Never wipe the system.
mauam said:
You wiped the system right? So you fkd up your phone. Never wipe the system.
Click to expand...
Click to collapse
Whats wrong with wiping system before flashing a rom?
heithered said:
Whats wrong with wiping system before flashing a rom?
Click to expand...
Click to collapse
Don't know, I only remember a old advice from an old friend here, that's it. I never wiped the system, though. Good luck bud
Related
I'm currently on jellycore (hydracore kernel), I download the ICS rom below and tried to flash it via CWM. I wiped cache/dalvik and installed from SD, everything seemed to go ok but now the phone will only boot to the samsung logo.
http://forum.xda-developers.com/showthread.php?t=1872965
Do you think I should try and install an older ROM like gingerbread via PC-Odin ?
Thanks,
mug2k said:
I'm currently on jellycore (hydracore kernel), I download the ICS rom below and tried to flash it via CWM. I wiped cache/dalvik and installed from SD, everything seemed to go ok but now the phone will only boot to the samsung logo.
http://forum.xda-developers.com/showthread.php?t=1872965
Do you think I should try and install an older ROM like gingerbread via PC-Odin ?
Thanks,
Click to expand...
Click to collapse
Why did you only wipe cache and dalvik? You should've wiped data as well. Boot back into Recovery. Flash the Hydracore kernel (if you don't have that, flash the Jellycore ROM because it has the kernel). Reboot recovery. Wipe data, cache and dalvik. Flash stock ICS again. Boot.
andreww88 said:
Why did you only wipe cache and dalvik? You should've wiped data as well. Boot back into Recovery. Flash the Hydracore kernel (if you don't have that, flash the Jellycore ROM because it has the kernel). Reboot recovery. Wipe data, cache and dalvik. Flash stock ICS again. Boot.
Click to expand...
Click to collapse
I'm currently in download mode because I was going to install GB via PC-Odin. Can I just turn off the phone ?. Also is the ROM in the OP ok to flash once I've re-flashed hydracore ?.
mug2k said:
I'm currently in download mode because I was going to install GB via PC-Odin. Can I just turn off the phone ?. Also is the ROM in the OP ok to flash once I've re-flashed hydracore ?.
Click to expand...
Click to collapse
It should give you an option to reboot in download. But you can just hold down volume up + power + home button and restart to recovery.
After you re-flash Hydracore AND REBOOT RECOVERY, you can flash whatever stock ICS you want, just make sure you wipe data, cache and dalvik.
DO NOT WIPE DATA BEFORE YOU REBOOT RECOVERY! Can't stress enough.
andreww88 said:
It should give you an option to reboot in download. But you can just hold down volume up + power + home button and restart to recovery.
After you re-flash Hydracore AND REBOOT RECOVERY, you can flash whatever stock ICS you want, just make sure you wipe data, cache and dalvik.
DO NOT WIPE DATA BEFORE YOU REBOOT RECOVERY! Can't stress enough.
Click to expand...
Click to collapse
Just to be 100% sure, wipe data, cache and dalvik AFTER I've flashed hydracore, rebooted recovery and flashed stock ICS.
mug2k said:
Just to be 100% sure, wipe data, cache and dalvik AFTER I've flashed hydracore, rebooted recovery and flashed stock ICS.
Click to expand...
Click to collapse
You can flash hydracore, reboot recovery, wipe data, cache and dalvik, then flash stock ICS.
Still stuck on the samsung logo, must be something wrong with the ROM I have.
edit: its ok, just took a while
mug2k said:
Still stuck on the samsung logo, must be something wrong with the ROM I have.
edit: its ok, just took a while
Click to expand...
Click to collapse
Good.
It does take longer to boot the first time, especially on TW roms.
andreww88 said:
Good.
It does take longer to boot the first time, especially on TW roms.
Click to expand...
Click to collapse
Appreciate the help dude, got a bit scared for a while. Thought I bricked it
Hey,
I got little problem and I need some help. I wanted to falsh OMNI AsylumKANG (from thread http://forum.xda-developers.com/showthread.php?t=2591479 ) , but my n7000 failed to start system. Instead after samsung logo it restarted into twrp screen.My version number is N7000XXLT9. These are steps I made:
1. using stock recovery I flashed PhilZ-cwm6-XXLT9-ORA-5.11.2-signed
2. then launched and rebooted into PhilZ recovery
3. flashed raw_kernel_r4_j43 and reboot into recovery
4. wiped data, cache partition and dalvik cache
7. flashed AsylumKANG_4.4.2_n7000_Build2.2
8. flashed pa_gapps-modular-mini-4.4.2-20140111-signed
9. flashed UPDATE-SuperSU-v1.86
10. reboot
Afterwards as I said phoned showed samsung logo and rebooted itself to twrp recovery
What is problem here?
Thanks for help.
Should reflash Philz. Go to wipe/factory reset menu, then choose clean to install rom. Then go to advanced, wipe dalvik cache. Then reflash raw5, then flask rom.
Sent from my phone.
forest1971 said:
Should reflash Philz. Go to wipe/factory reset menu, then choose clean to install rom. Then go to advanced, wipe dalvik cache. Then reflash raw5, then flask rom.
Sent from my phone.
Click to expand...
Click to collapse
Thanks for idea but I didn't help I flashed stock rom, then Philz then clean to install rom, wipe dalvik cache and the rest is just like from step 3 down. Same issue. I flashed once again stock rom and Philz, but this time installed paranoid android 3+ (pa_n7000-3.99-RC2-20131012). It worked. Maybe I just wait for more kitkat 4.4 based rom releases and then try.
After flash r5 you need to boot into recovery before proceed with lashing rom. Make sure you have done that step.
Sent from my phone.
forest1971 said:
After flash r5 you need to boot into recovery before proceed with lashing rom. Make sure you have done that step.
Sent from my phone.
Click to expand...
Click to collapse
After flash r4 i boot into recovery. You're saying to flash r5 instead of r4?
Was flashing my friends i9305 and now it wont boot any rom I flash... always gets stuck on the first boot screen until I take out battery.
I flashed CWM 6.0.4.7 using odin.
I have tried flashing several roms (CM 11, CM 10.1, PACman 4.3)... Each one will flash with no errors, then when I reboot after correct GAPPS it just gets stuck on the loading screen forever and won't boot up into ROM.
Wipe data/cache, wipe dalvik, wipe system > Install rom from zip, install GAPPS from zip > reboot (even here I wipe system/data/cache - still doesnt work).
Any ideas on why it won't load up the roms....
only4dank said:
Was flashing my friends i9305 and now it wont boot any rom I flash... always gets stuck on the first boot screen until I take out battery.
I flashed CWM 6.0.4.7 using odin.
I have tried flashing several roms (CM 11, CM 10.1, PACman 4.3)... Each one will flash with no errors, then when I reboot after correct GAPPS it just gets stuck on the loading screen forever and won't boot up into ROM.
Wipe data/cache, wipe dalvik, wipe system > Install rom from zip, install GAPPS from zip > reboot (even here I wipe system/data/cache - still doesnt work).
Any ideas on why it won't load up the roms....
Click to expand...
Click to collapse
I have same problem here.. no one help me... I dont know I was in i9000 thread and lot of time I got answers.. miss that thread so much .
1Ishara said:
I have same problem here.. no one help me... I dont know I was in i9000 thread and lot of time I got answers.. miss that thread so much .
Click to expand...
Click to collapse
Well I figured it out... since it was never flashed or anything before (from stock rom)... I just went into the Mounts and Storage menu, and formated /cache /system /data manually and it finally worked.
Hope that helps
Hey guys,
I have unlocked the bootloader and rooted the device - but for some reason, I cannot install ROMs.
When I access the recovery and attempt an install, it merelty aborts me from the process. I don't get it.
I believe the problem may be due to an accidental OTA update - but every time I try to rectify this with a factory reset, the update occurs automatically, before I am even granted access to the phone. Heck, every time I turn the device on, it says "android is upgrading".
Has anyone ever experienced this? Any idea on a course of action? The stock firmware just eats my battery like its a buffet.
Take a backup in twrp(data , system , boot) , take a titanium backup of ur apps..
Download the rom and gapps.
Go to recovery and wipe >advanced wipe > system, data, cache and dalvik cache
If it's a 5.1 Custom rom, flash cm 12.1 boot img or 12.1 rom first.
Then wipe , system, data, cache and dalvik cache.
Flash the Downloaded rom And gapps , it will take 5-10mins to boot up at first.
If ur gonna flash cm13, directly flash it (if u were on lollipop) , no need to flash cm 12 and then cm 13
If ur experiencing any errors, post a screenshot of the error.
Hope this solved ur problem
james11705 said:
Take a backup in twrp(data , system , boot) , take a titanium backup of ur apps..
Download the rom and gapps.
Go to recovery and wipe >advanced wipe > system, data, cache and dalvik cache
If it's a 5.1 Custom rom, flash cm 12.1 boot img or 12.1 rom first.
Then wipe , system, data, cache and dalvik cache.
Flash the Downloaded rom And gapps , it will take 5-10mins to boot up at first.
If ur gonna flash cm13, directly flash it (if u were on lollipop) , no need to flash cm 12 and then cm 13
If ur experiencing any errors, post a screenshot of the error.
Hope this solved ur problem
Click to expand...
Click to collapse
Thanks, mate. I don't know what I was doing wrong - but following your steps reconciled my problem. I appreciate it. :good:
I flashed SlimKat using Philz, and it's stuck on the flashing blue SlimKat logo. It's been stuck like this for a little over 10 minutes. I can still get it into recovery, and yes, I've already tried wiping Dalvik and cache. Any other suggestions?
tyvas97 said:
I flashed SlimKat using Philz, and it's stuck on the flashing blue SlimKat logo. It's been stuck like this for a little over 10 minutes. I can still get it into recovery, and yes, I've already tried wiping Dalvik and cache. Any other suggestions?
Click to expand...
Click to collapse
Ok here is the solution.
1)Make sure your files are complete
2)Try it with TWRP recovery latest version
Even if you are using Philz or TWRP,
1)Try to advance wipe system, data, cache
2)Then flash the files
3)wipe dalvik cache
Cheers​