Database Develop

Debranding - not so easy..

*********************** WARNING***********************
Somebody tried the procedure I wrote before without success! Please do not do it until everything gets clarified. It may be necessary to unlock the boot loader before (SRTK tool). To unlock the bootloader it is necessary to get the needed code from huawei at this link.
**********************************************************
Hello All,
after having spent over one full day trying to debrand my Huawei P9 Plus (without success..) I have finally found a way to do that which is really easy (and successful!).
BTW. THis is something you can do at your own risk! Consider that FW Upgrade may anyway be dangerous and will ERASE ALL YOUR DATA! Don't blame me if something goes wrong..
PHASE 1 - unlocking the boot loader
0. Install Android SDK (Android studio is ok) and make sure on command line you can execute "fastboot" command and "adb" command; In alternative you can use install ADB, fastboot and drivers in 15 seconds as described in this thread.
1. get the serial number. On the phone keyboard digit *#*#2846579#*#* then select 2. Veneer Informations and then 3. Other Info. Take note of the serial number. You will need also your phone IMEI code (you can get it from phone settings->phone status);
2. Go to this link and get the bootloader unlock code.
3. Now to start the phone in boot mode you need to:
a. shutdown the phone
b. press simultaneously volume- and power button until you get to the boot loader page
c. open a cmd shell and write down the command: fastboot oem unlock <put-here-your-unlock-code>. If the code is right the bootloader will be unlocked and the phone will factory reset and reboot.
PHASE 2
1. Download from http://www.huaweifirm.com/firmware/p9-plus-vie-l09/ the firmware you need (C432 is the European unbranded version I downloaded) I downloaded exactly the VIE-L09_C432B161a_Firmware_CEE&Nordic European_Channel-Others_Android 6.0_EMUI 4.1_05013RNS
2. format a micro SD card (not really needed but I did it..)
3. unzip the dload folder from zip to the SD card. Verify that the dload folder contains one file (UPDATE.APP) and two folders (dt and hw).
4. shutdown the phone
5. insert the SD card (with dload)
6. press volume+ volume- and power button simultaneously and keep it pressed until you don't see that the upgrade is started.
7. wait till the end..
That's all.. After this my phone got the upgrade from OTA.. and I am happy
Hope this may save some time for other people wanting to debrand their P9 plus.

Jesus!!! How can be that simple to unbrand the phone??There´s a thread in the forum for this purpose, and there are fellows that bricked their phone. Which brand you were on?

ehduarte said:
Jesus!!! How can be that simple to unbrand the phone??There´s a thread in the forum for this purpose, and there are fellows that bricked their phone. Which brand you were on?
Click to expand...
Click to collapse
To unbrand the phone is quite easy but the most difficult is to get it to a OTA enabled version.. when you upgrade it to an unbranded version using just the UPDATE.APP as in most thread described.. you end by getting a C900 version which is does not support OTA upgrades.
I had C555 (H3G Ita). Now is C432. What was difficult was to find the right dload to put on the micro SD... all other zip files (update.zip) on most threads where missing the parts needed to really set the device to C432.

antonio2009 said:
To unbrand the phone is quite easy but the most difficult is to get it to a OTA enabled version.. when you upgrade it to an unbranded version using just the UPDATE.APP as in most thread described.. you end by getting a C900 version which is does not support OTA upgrades.
I had C555 (H3G Ita). Now is C432. What was difficult was to find the right dload to put on the micro SD... all other zip files (update.zip) on most threads where missing the parts needed to really set the device to C432.
Click to expand...
Click to collapse
I have the vodafone Portugal. Downloading the unbranded version on the wesite you posted and following your method i won´t brick my phone? And i will have OTA enabled?
---------- Post added at 01:09 PM ---------- Previous post was at 01:07 PM ----------
ehduarte said:
I have the vodafone Portugal. Downloading the unbranded version on the wesite you posted and following your method i won�t brick my phone? And i will have OTA enabled?
Click to expand...
Click to collapse
By doing this will i loose warranty? Or will my hicare premium warranty will be revogued?

Hello, your method did not work on my P9 +
I tested 2 times (with an unformatted and formatted SD card). Same result, I'm still in C900B170.

antonio2009 said:
To unbrand the phone is quite easy but the most difficult is to get it to a OTA enabled version.. when you upgrade it to an unbranded version using just the UPDATE.APP as in most thread described.. you end by getting a C900 version which is does not support OTA upgrades.
I had C555 (H3G Ita). Now is C432. What was difficult was to find the right dload to put on the micro SD... all other zip files (update.zip) on most threads where missing the parts needed to really set the device to C432.
Click to expand...
Click to collapse
There is 5 different C432 firmwares, wich did u use of them?
Sent from my VIE-L29 using XDA Labs

I did exactly what you said and my became with the version c900B170 (

I used exactly this:
VIE-L09_C432B161a_Firmware_CEE&Nordic European_Channel-Others_Android 6.0_EMUI 4.1_05013RNS
I am wondering if the bootloader was unlocked when I started the procedure I described.. In case that would be the missing step I omitted. I got the unlock code on huawei website. Then I used SRTK tool to unlock the boot loader. I am sorry if this is the case... but anyway without the right rom it didn't work.
Guys I have modified my initial post to avoid other people to set their phone to C900...
Please try the new (more complex) procedure I described.

If install the original rom i had, will all be back to normal?? Because now i dont have the themes market only the local ones!!
I wished that i´ve never done this

​
ehduarte said:
If install the original rom i had, will all be back to normal?? Because now i dont have the themes market only the local ones!!
I wished that i´ve never done this
Click to expand...
Click to collapse
I am sorry, I have the themes market so even if you go till the end with the C432 you will get it. Did you check the updated procedure in the starting post? Please give it a try following the new procedure step by step and let me know. First of all you need to unlock the boot loader. Then do again what you already did.

antonio2009 said:
​
I am sorry, I have the themes market so even if you go till the end with the C432 you will get it. Did you check the updated procedure in the starting post? Please give it a try following the new procedure step by step and let me know. First of all you need to unlock the boot loader. Then do again what you already did.
Click to expand...
Click to collapse
To be honest i´m afraid that i will brick my phone What tool i need? Android SDK? SRK TOOL? I am confused lol
---------- Post added at 03:00 PM ---------- Previous post was at 02:53 PM ----------
PHASE 1 - unlocking the boot loader
0. Install Android SDK (Android studio is ok) and make sure on command line you can execute "fastboot" command and "adb" command; | Where i execute it? On Android Studio? CMD of windows?
1. get the serial number. On the phone keyboard digit *#*#2846579#*#* then select 2. Veneer Informations and then 3. Other Info. Take note of the serial number. You will need also your phone IMEI code (you can get it from phone settings->phone status);
2. Go to this link and get the bootloader unlock code.
3. Now to start the phone in boot mode you need to:
a. shutdown the phone
b. press simultaneously volume- and power button until you get to the boot loader page
c. open a cmd shell and write down the command: fastboot oem unlock <put-here-your-unlock-code>. If the code is right the bootloader will be unlocked and the phone will factory reset and reboot.

ehduarte said:
To be honest i�m afraid that i will brick my phone What tool i need? Android SDK? SRK TOOL? I am confused lol
Click to expand...
Click to collapse
I can help you to do this but I cannot take any responsibility in case you brick your phone. I made many many trials before getting to the right result and personally I don't think that you can brick the phone. But this is your own responsibility I cannot take it.. the only thing I can do is try helping you. Is this clear?
If you decided to try.. I found a useful thread that will install ADB and fastboot in 15 seconds..
First of all anyway you have to get the "bootloader unlock code" from huawei at this link by registering your phone. This is described in PHASE 1 steps.

ehduarte said:
To be honest i´m afraid that i will brick my phone What tool i need? Android SDK? SRK
Click to expand...
Click to collapse
I just wanted to clarify in addition that if you unlock the bootloader you will probably invalidate the warranty... once the boot loader is locked again it says "relocked" so it is clear that it was unlocked at least once.

If i install the original rom i´ve had everything will be back to normal? Will revert back to co2 vodafone brand?
---------- Post added at 03:42 PM ---------- Previous post was at 03:41 PM ----------
antonio2009 said:
I can help you to do this but I cannot take any responsibility in case you brick your phone. I made many many trials before getting to the right result and personally I don't think that you can brick the phone. But this is your own responsibility I cannot take it.. the only thing I can do is try helping you. Is this clear?
If you decided to try.. I found a useful thread that will install ADB and fastboot in 15 seconds..
First of all anyway you have to get the "bootloader unlock code" from huawei at this link by registering your phone. This is described in PHASE 1 steps.
Click to expand...
Click to collapse
I have already the code.
---------- Post added at 03:43 PM ---------- Previous post was at 03:42 PM ----------
antonio2009 said:
I just wanted to clarify in addition that if you unlock the bootloader you will probably invalidate the warranty... once the boot loader is locked again it says "relocked" so it is clear that it was unlocked at least once.
Click to expand...
Click to collapse
So... If it says relocked it voids the warranty also right?

ehduarte said:
So... If it says relocked it voids the warranty also right?
Click to expand...
Click to collapse
right

For those of us that installed a European unbranded rom in a branded phone, to be back as it was, receiving OTA, themes market working, etc etc... Just install the original ROM that your phone had and all is back to normal.
Though i will try to put an european unbranded rom, as it receives updates quicker than an unbranded one.
When i try the Antonio method and i hope i´ll be successful i´ll inform you guys

How to Unlock my bootloader on mi5 ?

I have downloaded all the files. Now can anybody please explain the procedure ? i have checked all those posts in miui forum but i am not able to get anything done.

Tauhid786 said:
I have downloaded all the files. Now can anybody please explain the procedure ? i have checked all those posts in miui forum but i am not able to get anything done.
Click to expand...
Click to collapse
Hi! What step are you at? Have you asked for unlocking? Has it been accepted? Have you tried the Unlock tool provided by Xiaomi?

MrAdny said:
Hi! What step are you at? Have you asked for unlocking? Has it been accepted? Have you tried the Unlock tool provided by Xiaomi?
Click to expand...
Click to collapse
I have downloaded the unlock tool provided by xiaomi after accepting my request. then this.
Then miunlock tool says
"checking if your mi account has permission"
Then is shows " your device isn't supported by mi unlock"

Tauhid786 said:
I have downloaded the unlock tool provided by xiaomi after accepting my request. then this.
Then miunlock tool says
"checking if your mi account has permission"
Then is shows " your device isn't supported by mi unlock"
Click to expand...
Click to collapse
I was also getting this error when I was trying to unlock it. This possible fix will format your memory. Try installing​ a developer rom from here http://en.miui.com/download-299.html (not the stable version). Download the zip file into your storage, go to Updater app > tap three dots in the up-right corner > tap Choose update package > select your zip file > tap OK.
Let it install the ROM. After that try again the Unlock tool.

MrAdny said:
I was also getting this error when I was trying to unlock it. This possible fix will format your memory. Try installing​ a developer rom from here http://en.miui.com/download-299.html (not the stable version). Download the zip file into your storage, go to Updater app > tap three dots in the up-right corner > tap Choose update package > select your zip file > tap OK.
Let it install the ROM. After that try again the Unlock tool.
Click to expand...
Click to collapse
OK I will try it and then i will let u know.
But i have one more question. I cannot even flash my device with miui 8.1.4 with flashtool. It shows me device is locked or something like that so it doesn't flash.

Tauhid786 said:
OK I will try it and then i will let u know.
But i have one more question. I cannot even flash my device with miui 8.1.4 with flashtool. It shows me device is locked or something like that so it doesn't flash.
Click to expand...
Click to collapse
Don't use flashtool. Use the app. You can use flashtool after you get your bootloader unlocked.

MrAdny said:
Don't use flashtool. Use the app. You can use flashtool after you get your bootloader unlocked.
Click to expand...
Click to collapse
I have just installed the developer version rom. Now it still is showing me that my device is not supported by miunlock.

Tauhid786 said:
I have just installed the developer version rom. Now it still is showing me that my device is not supported by miunlock.
Click to expand...
Click to collapse
Oh ? Just to make sure:
Are you logged into your Mi account on the phone?
Do you see the Xiaomi rabbit on your phone when trying to unlock it?

MrAdny said:
Oh Just to make sure:
Are you logged into your Mi account on the phone?
Do you see the Xiaomi rabbit on your phone when trying to unlock it?
Click to expand...
Click to collapse
I logged into my mobile with the same account and i can see that white xiaomi rabbit on my fastboot screen.
but mi unlock tool in my computer still saying its not supported. I also enable developer option and from there i enable oem unlocking.
Now is therer anything i missed ??

Tauhid786 said:
I logged into my mobile with the same account and i can see that white xiaomi rabbit on my fastboot screen.
but mi unlock tool in my computer still saying its not supported. I also enable developer option and from there i enable oem unlocking.
Now is therer anything i missed ??
Click to expand...
Click to collapse
Well, I'm sorry ? I can't help you

MrAdny said:
Well, I'm sorry I can't help you
Click to expand...
Click to collapse
You actually helped me a lot. did u receive any unlock code ? i think i didnt receive one.

Tauhid786 said:
You actually helped me a lot. did u receive any unlock code ? i think i didnt receive one.
Click to expand...
Click to collapse
I did not ?

Huawei p8 lite 2017 bricked after wrong oem flash

(SOLVED) So I wanted to debrand my phone, and I saw this post https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
problem is, the oem I flashed with twrp was for the p9 lite, now my phone doesn't boot inside the os, it only goes to huawei erecovery but the download always fails. I can boot to fastboot mode but everything I try to do it says command not allowed, only fastboot devices work
I hope someone can help me as I really need my phone for work, thanks very much
my original cust was C02
I also have a twrp backup I did, but I just cant get inside twrp because as soon the phone turns on it goes to erecovery
Edit: i finally resolved and I'm going to really help you if you flashed the wrong oem file just like me, just follow these steps:
1. since you installed a new oeminfo, you are gonna need to unlock the bootloader again, (just like you did the first time), but wait! here is what I did wrong, when you request an unlock code, huawei in the unlock page is gonna ask you for your imei and serial number, I was lazy and I got my imei via fastboot instead of checking the one on my phone's box, worst idea ever because when you flash another oem your imei is gonna change so that's why in the site it said sn and imei are mismatching, so take the IMEI on your phone's box and NOT via fastboot. Anyway, let's go to part 2
2. in the unlocking site they are gonna ask for a product id wich you can get by writing *#*#1357946#*#* in the phone's dialpad, but you're probably thinking "how can I do that if my phone does't boot the os?" but don't worry my brudda! just download this https://cloud.mail.ru/public/KGmS/1cEhHg1G6 , open it and chose huawei y300-0100 as product model, then put your IMEI (take the one from your phone's box!!) and it's gonna give you the product id you need in the huawei site.
3. once they give you the unlocking password, power off your huawei and connect it in your pc with your usb while holding the volume down button, you should go in fastboot mode
4. once you are in fastboot mode write in the cmd fastboot oem unlock (9982883838382365) <<(instead of this numbers write the unlocking password they gave you in the huawei unlocking site) aaaand done, you unlocked the bootloader once again.
5. if you previously had twrp (before flashing the wrong oem file) it's gonna pop up when you boot the phone, now you can use fastboot or twrp again to flash the right oem (or stock rom)
I REALLY HOPE I'M GONNA HELP YOU BECAUSE I KNOW HOW BAD IT FEELS WHEN YOU BRICK YOUR DEVICE LIKE I DID!!
Now bye everyone I need to go play soccer and I'm late

yeahboi99 said:
So I wanted to debrand my phone, and I saw this post https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
problem is, the oem I flashed with twrp was for the p9 lite, now my phone doesn't boot inside the os, it only goes to huawei erecovery but the download always fails. I can boot to fastboot mode but everything I try to do it says command not allowed, only fastboot devices work
I hope someone can help me as I really need my phone for work, thanks very much
my original cust was C02
I also have a twrp backup I did, but I just cant get inside twrp because as soon the phone turns on it goes to erecovery
Click to expand...
Click to collapse
FRP status? (in fastboot)
Phone status? (in fastboot)

unlock the bootloader again, even if it says its locked, after that fastboot should work fine. then you can try again booting into twrp and flash the right oeminfo

Alex261099 said:
FRP status? (in fastboot)
Phone status? (in fastboot)
Click to expand...
Click to collapse
Hi thanks for the reply
when I open fastboot under the little android guy it says:
PHONE Unlocked
FRP Unlock

yeahboi99 said:
Hi thanks for the reply
when I open fastboot under the little android guy it says:
PHONE Unlocked
FRP Unlock
Click to expand...
Click to collapse
firstly try to unlock the bootloader
if nothing happens
a. start praying
b. relock and then unlock the bootloader.... it's the only thing that i have in mind
i'm not responsible for any damage

Striike said:
unlock the bootloader again, even if it says its locked, after that fastboot should work fine. then you can try again booting into twrp and flash the right oeminfo
Click to expand...
Click to collapse
hi thx for the tip but i'm in the huawei unlock page and it's asking me for my phone's product id, wich you can only get by dialing *#*#1357946#*#* in the dialpad

yeahboi99 said:
hi thx for the tip but i'm in the huawei unlock page and it's asking me for my phone's product id, wich you can only get by dialing *#*#1357946#*#* in the dialpad
Click to expand...
Click to collapse
have you ever unlocked your bootloader?
have you saved the code? it's the same

Alex261099 said:
have you ever unlocked your bootloader?
have you saved the code? it's the same
Click to expand...
Click to collapse
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho

yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
have you used windows for unlocking?
if yes windows 10?
if yes have you used powershell?
if yes press arrow up until you see fastboot oem unlock "number", copy the number (it's the code!!!)
if no .... idk i'll do some research

yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
Lesson in life: ALWAYS save the bootlocker unlock code
Good luck

Alex261099 said:
have you used windows for unlocking?
if yes windows 10?
if yes have you used powershell?
if yes press arrow up until you see fastboot oem unlock "number", copy the number (it's the code!!!)
if no .... idk i'll do some research
Click to expand...
Click to collapse
I used cmd in windows 10 and it doesn't have the arrow key
thanks for helping me XD and by the way I checked my imei on a site and it says that my device is a p9 (what the heck?) I guess I need to install some p9 files to make my phone work again?
grazie

yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
you should have got an email with the code in it, it was like this for me.

Striike said:
you should have got an email with the code in it, it was like this for me.
Click to expand...
Click to collapse
I got it directly in the site I also tried this method https://forum.xda-developers.com/p9/help/how-to-product-id-bricked-p9-t3561156
but when I click on commit after writing all in the huawei unlock site bars it says SN and IMEI are mismatched

I mean you really f***ed up there. I thought that you could restore the device by eRecovery but If you would do that you would brick it completely bc it would Download everything for the p9...
you can't do anything without the unlock Code.
You could otherwise try to force upgrade via dload
---------- Post added at 09:05 PM ---------- Previous post was at 09:02 PM ----------
You could try this Generator https://cloud.mail.ru/public/KGmS/1cEhHg1G6
or DC unlocker (costs money)

You can use Firmware finder for PC and eRecovery DNS method to restore your phone to any firmware you want

[GUIDE] How to unlock bootloader of P7 L10 in 2018 (Without Huawei unlock or paying)

I have attached my unlocking software, if you are still on android kitkat you can immediately unlock and if youre on android 5.0 or 5.1.1 the software will help you downgrade, once you have unlocked the bootloader you can upgrade back to the new software.

Thanks, working trough it on *nix atm, i tried the method described to unlock the bootloader officially, or so i thought, the method has been removed from the Huawei web site. Registering an account was required to obtain the unlock code but this resulted in me having to editing the page to add my country number as the country was not listed to get the sms unlock code.... At the moment i am preparing to hack the device but have not currently found the file for the B856 firmware it's running. I do not want to for example downgrade the baseband, the baseband will need to be hacked a little bit in order to get Android 7.x, i believe is the case.
Rooted my system and backed up all the partitions. Everything but userdata that is,
https://drive.google.com/open?id=1cf7BTfUwbhweVm1HRGhFe11XteJ9ygmi
Cheers

threader said:
Thanks, working trough it on *nix atm, i tried the method described to unlock the bootloader officially, or so i thought, the method has been removed from the Huawei web site. Registering an account was required to obtain the unlock code but this resulted in me having to editing the page to add my country number as the country was not listed to get the sms unlock code.... At the moment i am preparing to hack the device but have not currently found the file for the B856 firmware it's running. I do not want to for example downgrade the baseband, the baseband will need to be hacked a little bit in order to get Android 7.x, i believe is the case.
Rooted my system and backed up all the partitions. Everything but userdata that is,
https://drive.google.com/open?id=1cf7BTfUwbhweVm1HRGhFe11XteJ9ygmi
Cheers
Click to expand...
Click to collapse
this is your unlock code i think:
1901142471071521

DrPiggy said:
this is your unlock code i think:
1901142471071521
Click to expand...
Click to collapse
Much appreciated, thank you, i did not get give myself a chance to continue before departing, i will add this device to my working AOSP (and kernel) once its working, i simply dont have time to code as i wish for a while though, thanks a lot.

Doubt
Hello I am interested in unlocking the boot manager of my huawei p7-l12, you could explain how to use the software that you provided in this thread, I am currently with the rom stock kitkat 4.4.2 and emui 2.3 open market, thanks in advance.

Laxus113 said:
Hello I am interested in unlocking the boot manager of my huawei p7-l12, you could explain how to use the software that you provided in this thread, I am currently with the rom stock kitkat 4.4.2 and emui 2.3 open market, thanks in advance.
Click to expand...
Click to collapse
This software is for the p7-l10 so im not sure if it will work for l12 but it may work, just download it, connect your phone via a usb cable, run the bat file and then choose the option you want from the listed options (unlocking bootloader)

As I can root the huawei p7-l12 the apps to perform this procedure are automatically blocked, I mention it because in the executable root appears necessary.

Hi, I can confirm that this method works for the huawei p7-l12.

DrPiggy said:
I have attached my unlocking software, if you are still on android kitkat you can immediately unlock and if youre on android 5.0 or 5.1.1 the software will help you downgrade, once you have unlocked the bootloader you can upgrade back to the new software.
Click to expand...
Click to collapse
Hey, I've tried to get my code but it doesn't work. I have already downgraded and when I open the Get_bootloader_code file and choose the choice 4, it says press enter to continue, I press enter and nothing happens. BUT if I disconnect the device it says step 2 where you have to type your code and press enter. Thing is, I got no code! Please tell me if I'm doing something wrong and thanks in advance!

an4 said:
Hey, I've tried to get my code but it doesn't work. I have already downgraded and when I open the Get_bootloader_code file and choose the choice 4, it says press enter to continue, I press enter and nothing happens. BUT if I disconnect the device it says step 2 where you have to type your code and press enter. Thing is, I got no code! Please tell me if I'm doing something wrong and thanks in advance!
Click to expand...
Click to collapse
For this to work you have to be rooted! Make sure you are rooted, and if you are, open up cmd and write adb devices while the device is connected with a usb cable to your pc and give me the output

Works in 2019 this year?

SharkyBeAre said:
Works in 2019 this year?
Click to expand...
Click to collapse
Yes

DrPiggy said:
I have attached my unlocking software, if you are still on android kitkat you can immediately unlock and if youre on android 5.0 or 5.1.1 the software will help you downgrade, once you have unlocked the bootloader you can upgrade back to the new software.
Click to expand...
Click to collapse
i am using ascend p7L10 android version 5.1
can anyone guide me how to unblock my bootloader

DrPiggy said:
this is your unlock code i think:
1901142471071521
Click to expand...
Click to collapse
Works, thanks a lot :>

So I am stuck with this at the moment. To unlock the bootloader, I need to have the phone rooted. And to be able to unroot, I need to have an unlocked bootloader.
I already tried to downgrade back from 5.1.1 to a lower version, but I was not succesfull.
How can I get an unlocked, rooted P7?

That is nice, thanks.
Howeever I need to get back to 5.1.1, while keeping it unlocked/TWRPed, will OTA work, or i need to do incremental flash through TWRP? As i understand doing it by UPDATE.APP would lock the bootloader again?
EDIT: never fk mind.
You know what... DC Unlock really gives you the code for 4€, and it takes 60 seconds.
So after 5 hours of downloading and flashing roms, now I suddenly have TWRP and Magisk after 5 minutes and easy instructions. Couldn't recommend more.
https://imgur.com/a/MfEraiK

guys please help
after unlock bootloader of your device your data has been erased ?

P10 not turning on after update!!!

Hello.
i have a Huawei P10. [VTR-L29 9.0.1.159(C185E3R1P9)]. I updated it using hisuite and firmware finder via erecovery 2 weeks ago, then recently i tried to check for updates in hisuite, an update is available, with the same build number(developer) with size of 880mb and i updated it, after completion of update, phone restarts, verify installation packages and proceed with update installing, after 99% phone restarts again and not turning on itself, i tried manually turning it on, not successful. so I tried plugging it in my computer, hisuite detects it, and system recovery is the only option. i tried but it failed, and should be taken to the service center.
What should I do?
-my phone was purchased abroad
-warranty expired a year ago
-i dont have the box of it and the imei infos.
If anyone can help me, please I need it. THANKS

itsjhndnllclrg said:
Hello.
i have a Huawei P10. [VTR-L29 9.0.1.159(C185E3R1P9)]. I updated it using hisuite and firmware finder via erecovery 2 weeks ago, then recently i tried to check for updates in hisuite, an update is available, with the same build number(developer) with size of 880mb and i updated it, after completion of update, phone restarts, verify installation packages and proceed with update installing, after 99% phone restarts again and not turning on itself, i tried manually turning it on, not successful. so I tried plugging it in my computer, hisuite detects it, and system recovery is the only option. i tried but it failed, and should be taken to the service center.
What should I do?
-my phone was purchased abroad
-warranty expired a year ago
-i dont have the box of it and the imei infos.
If anyone can help me, please I need it. THANKS
Click to expand...
Click to collapse
Hope that bootyloader still working, else there's a chance for you to get another phone.
If I had to go thru what you have today... I would try to flash Emui 9 based RR or Los just to revived while enjoying the pure android interface.
If all else fails... Go back to basic maybe there is a thing or two that you've missed

fr3ker said:
Hope that bootyloader still working, else there's a chance for you to get another phone.
If I had to go thru what you have today... I would try to flash Emui 9 based RR or Los just to revived while enjoying the pure android interface.
If all else fails... Go back to basic maybe there is a thing or two that you've missed
Click to expand...
Click to collapse
forgot to include that my bootloader is locked, my bad fastboot and adb only detects my phone. thanks for replying btw

itsjhndnllclrg said:
forgot to include that my bootloader is locked, my bad fastboot and adb only detects my phone. thanks for replying btw
Click to expand...
Click to collapse
a better reason to get it unlocked isn't it?

fr3ker said:
a better reason to get it unlocked isn't it?
Click to expand...
Click to collapse
how can I unlock it? like what method?

itsjhndnllclrg said:
how can I unlock it? like what method?
Click to expand...
Click to collapse
Can you get to the bootyloader or recovery? As long as bootyloader still working there's still a chance for revival.
You can try flash stock recovery & try to get it to flash the stock fw from it.

I have solution
contanct to me

fr3ker said:
Can you get to the bootyloader or recovery? As long as bootyloader still working there's still a chance for revival.
You can try flash stock recovery & try to get it to flash the stock fw from it.
Click to expand...
Click to collapse
my bootloader in locked, i havent unlocked it before, is there any way to unlock it without spending money? the only thing i know , it is detected in fastboot and also in dc unlocker.

itsjhndnllclrg said:
my bootloader in locked, i havent unlocked it before, is there any way to unlock it without spending money? the only thing i know , it is detected in fastboot and also in dc unlocker.
Click to expand...
Click to collapse
I don't see any articles on for unpaid versions to unlock the bootloader. The only safe & easy is thru dcunlocker.
Hav u tried boot to erecovery & see if it can recover that stock firmware??

fr3ker said:
I don't see any articles on for unpaid versions to unlock the bootloader. The only safe & easy is thru dcunlocker.
Hav u tried boot to erecovery & see if it can recover that stock firmware??
Click to expand...
Click to collapse
I tried erecovery as you said but I failed to do so, the only hope I think is just the fastboot mode. also, I would like to ask if what option or how many credits should I get in DC Unlocker?

itsjhndnllclrg said:
I tried erecovery as you said but I failed to do so, the only hope I think is just the fastboot mode. also, I would like to ask if what option or how many credits should I get in DC Unlocker?
Click to expand...
Click to collapse
I spent roughly not more than 5usd for a code & that's about it. Nothing more... Now I'm happily unlocked that bootyloader :good:
I think the only ways is thru pc or with a small payment at the huawei service centre to get that firmware up and running again.

fr3ker said:
I spent roughly not more than 5usd for a code & that's about it. Nothing more... Now I'm happily unlocked that bootyloader :good:
I think the only ways is thru pc or with a small payment at the huawei service centre to get that firmware up and running again.
Click to expand...
Click to collapse
is this the only required credits to unlock bootloader? see attached photo
and after you pay for credits, you will get unlock code? and use that unlock code to unlock bootloader in fastboot mode?

itsjhndnllclrg said:
is this the only required credits to unlock bootloader? see attached photo
and after you pay for credits, you will get unlock code? and use that unlock code to unlock bootloader in fastboot mode?
Click to expand...
Click to collapse
Yeah that's just about it. Safe keep the code very carefully.

fr3ker said:
Yeah that's just about it. Safe keep the code very carefully.
Click to expand...
Click to collapse
Hello, I just wanna make sure that I will get the unlock code but I dont know where I should get it. I dont know what tool should I use, HCU Client? , DC-Unlocker? or DC-Phoenix? I dont wanna waste my credits. THANKS

itsjhndnllclrg said:
Hello, I just wanna make sure that I will get the unlock code but I dont know where I should get it. I dont know what tool should I use, HCU Client? , DC-Unlocker? or DC-Phoenix? I dont wanna waste my credits. THANKS
Click to expand...
Click to collapse
The only app i ever used to get the unlock codes = https://play.google.com/store/apps/details?id=dc.huaweibootloadercodes
Then follow directions on how to unlock via fastboot