I'm new to P9. I was using fROMfuture New World V3.1 ROM. However, when I flashed back to stock rom, "THEME" app doesn't work any longer. I am not able to change any theme.
I don't know what is wrong with my device. Anyone have any idea about this? Thanks in advance.
BTW, 1. I downloaded correct stock firmware from xda 2. I used "dload" way to restore my device 3. I wiped cache and reset factory after installation finished.
Thanks a lot!
I had a similar problem to yours where for me, my HiCloud disappeared along with other Huawei apps. You will need a microsd card installed for this. I first had to wipe dalvik, cache, data, internal storage and system memory. Then when everything is clean, boot into erecovery and download the stock emui from there. Then everything was fixed for me. Hope this can fix your issue.
Related
Experiencing a few issues.
I want to flash a fresh version of Milkys rom because the current version I have won't let me flash a new theme.
I have the current version backed up and can restore it everytime and it works fine.
Flashing a new copy doesnt work. I get force closures and other issues such as partial themes.
I've flashed back to JPU and JPY and I can then update to JVO through kies without issue.
Even then, I don't get the result I know I should get when flashing Milkys rom. For example, there is no theme.
If I try to factory reset or clearing cache etc, I just get bootloops.
I then restore the original version of the rom that I have backed up and it works fine but I can't flash themes or rather they make no difference and I can't factory reset for the same reasons as above.
Whats going on ?
Do I need to wipe the int sd card at all ? What is safe to delete ? What do I need to get rid of ?
Help !
Please !!
The best thing you can do is a complete format of your sd card in recovery mode.
Btw pay attention, you MUST reflash with odin a deodexed stock JVx (the base rom your theme needs) because just kernel and bootloaders (if i remeber well) should remain on your SD!
Then wipe everything, dalvik cache included.
After that you can put on your SD the theme and then install it by recovery.
PS: this way will erase your backups also, so copy that file to your computer to get back (if you need to).
ok. Fed up now lol
Formatted sd card from recovery and checked it is clean.
Using Odin, flashed JVR.
Using odin flashed Milky v1.2. About phone says I have the rom but zero theming.
Put onto the clean sdcard the milky 1.3 patch and a theme zip.
Flashed the 1.3 patch, rebooted and then flashed the theme but I can't get any theming at all.
Whats up with this damn thing ?
Oh and everytime I'm doing a factory reset in Milky I'm getting bootloops. Is this cos the lagfix is active ?
Ofc, if you have lagfix you must disable them before any kind of installation
Sent from my GT-I9000 using XDA App
Milky's is ODEXed. Are you sure you have ODEX theme you try to install?
If you try DEODEXed theme, it won't work.
Yeah, it was an odexed theme.
Hi,
I read many posts about external_sd not detected properly on MIUI Roms..
Recently someone advised me to put GINGERBREAD bootloader first in order to have external_sd recognized correctly:
http://www.galnetmiui.co.uk/content/...l-not-detected
What I did tried so far:
1. http://forum.xda-developers.com/show....php?t=1089989
Download the right version from section above
Reboot your phone into Download mode
Connect your phone to computer
Run EZOdin
Select EZboot-Froyo-1.0.tar.md5 or EZboot-GingerBread-1.0.tar.md5 as a PDA file in EZOdin
Check the "Phone Bootloader Update" checkbox
Click Start
Wait until phone reboots and make it reboot into Recovery
Flash a custom CWM ROM
2. Then flashed Galnet 2.3.2b stable
but right after that I ended up in a bootloop. Only when I remove memory card, it finishes installation.. But with the same problem...
Please can you advise me with step-by-step instructions how to do that correctly ? (flashing correct GB bootloader and then MIUI rom...)
Thanks a lot!
cosmo
I installed miui and had this problem. I wiped cache dalvick cache and did a factory reset and reinstalled miui and now it works fine.
Sent from my GT-I9000 using XDA
_brymo_ said:
I installed miui and had this problem. I wiped cache dalvick cache and did a factory reset and reinstalled miui and now it works fine.
Click to expand...
Click to collapse
Really ? MIUI without GB bootloader doesn't support external_sd mounting. It is well described in many articles online. Which is exactly my case.
Can you please reply to me with step-by-step instructions what you did ?
Don't forget to mention FROM which ROM version did you do the upgrade and TO which version alsol...
thanks!
Hi all.
I am currently running ripper rom v13 with CWM and I wish to COMPLETELY wipe the contents of my Samsung Galaxy S3 LTE back to bare minimum without damaging partitions that are delicate.
I have tried performing a factory reset under SETTINGS. This left files/folders/photographs when browsing the phone.
I have performed a wipe via CWM, deleted data, system, davlik and cache partitions. This left files and folders as above.
After wiping the phone via the two methods above, I flashed ripper rom v13 rom and after booting I ran through the setup options (choose wireless etc), yet I still have folders remaining relating to OLD apps that I have removed or no longer need.
How can this be?
I have discovered there is a MegaWipe zip but this is not compatible with the 19305T - are there alternatives that I have missed?
Is this something to do with the internal SD card? Have I not wiped this? HELP!
CWM recovery mounts and storage .
Format sd card system cache data and preload .
Boot to download mode flash stock rom .
jje
Hi there,
Thanks for the reply. If I boot to download mode and flash stock rom, how do I do this? I've never performed this before. Do I have to flash stock rom? Can't I pick the ripper rom v13 again if I place it in ext sd card?
Sorry for so many questions!
There is a Mod called "Make Lite Rom" in the Update Me>Add/Remove Applications app that comes with the Ripper ROM. Not too sure if you want this.
Alternatively, there are other ROMs which are stock Android Based (I have tried Sentinel for a few hours).
JJEgan said:
CWM recovery mounts and storage .
Format sd card system cache data and preload .
Boot to download mode flash stock rom .
jje
Click to expand...
Click to collapse
Hi JJE,
I did as you said, I flashed the stock ROM using Odin and then went through the procedure of installing CWM and rooting.
I am now back into the Telstra stock ROM and all works fine, yet there are still remains of old apps in the phone??? I can see a friendcaster folder
and GO folders...yet before I flashed the stock ROM I did a full wipe.
I downloaded the stock ROM from Sammobile - Could it be that I need a full wipe ROM instead?
Any ideas?
Thanks!
I just bought my first Android phone - HTC One. I'm loving it so far!! The guy I bought it from previously rooted it and ran several roms on it. I'd like to copy all the files to my computer and then figure out how to wipe all the folders back to stock (no need to have all kinds of roms and folders from apps he had installed previously, etc.)
Is there a way to do this and wipe everything back to factory?? I tried to do the reset through the OS but the files are still there. I also seen factory reset in the bootloader but havent tried it since I'm still learning and dont want to brick the phone.
If you have the nandroid backup of stock the mobile.
Then goto recovery mode and wipe all data,dalvik cache, battery stats.etc..then say restore..The original stock will be back.
If atall u see old files delete with no fear using root explorer.(be carefull)
If any thing goes wrong just restore the backup through recovery....
Good luck:thumbup:
Sanjay Kumar said:
If you have the nandroid backup of stock the mobile.
Then goto recovery mode and wipe all data,dalvik cache, battery stats.etc..then say restore..The original stock will be back.
If atall u see old files delete with no fear using root explorer.(be carefull)
If any thing goes wrong just restore the backup through recovery....
Good luck:thumbup:
Click to expand...
Click to collapse
Thanks ... I was thinking the same thing last night ... I thought after rebooting into recovery TWRP had a wipe function (not sure if this does a full wipe or not).
How would I restore a backup once I wipe the device if it wipes the entire device? Use USB and upload it back to the device then restore?
Lastly, I restored into the first backup the device has on it but unfortunately it has tons of stuff already installed on it and I'd like it to be a fresh build. Additionally, I'm only on version 4.1.2 and I'd like to upgrade if possible. Perhaps I can find a newer version of the factory AT&T image which is fresh?
I seen a 4.2.2 thread stickied on here ... would that be a factory AT&T image I could restore to after wiping the entire device of everything? Or perhaps I should try the 4.3 leak or even wait for 4.3?
Guys i flashed the firmware following this link
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
After flashing my phone restarted and i got a SYSTEM UI HAS STOPPED error and everything goes black. How do i solve this
I did format data and cache in recovery. Still nothing.
badboyofpersia said:
Guys i flashed the firmware following this link
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
After flashing my phone restarted and i got a SYSTEM UI HAS STOPPED error and everything goes black. How do i solve this
I did format data and cache in recovery. Still nothing.
Click to expand...
Click to collapse
If you are using TWRP, try wiping
cache+dalvic cache+android secure
Did not work
Do your ROM have GApps?
If not, download appropriate GApps and flash it.
Also try clean flashing ROM.
How do you do a clean flash?
I installed philz recovery. In it i went and selected delete data to install a new rom.
Didn't help.
Then i tried format system, format data and all those other format options.
Didn't help.
Then i tried
Clean dalvik cache and format phone and clean cache.
Didn't help.
By the way. I did not lock my bootloader as mentioned in those instructions above. Is it cause of that?
And yes. I had one country's rom before. So this is of another country, does that cause such a problem?
Thanks alot bro
Restart your phone..else re flash it
Sent from my Micromax A110 using XDA Free mobile app
Guys i fixed it. Yayyyy.
I forgot to flash one of the system files which was not mentioned in the instructions.
Thanks aloooooot for helping me
I accidentally deleted persist folder. Now no wifi. Anyone knows where the persist folder is?
Thanks
badboyofpersia said:
I accidentally deleted persist folder. Now no wifi. Anyone knows where the persist folder is?
Thanks
Click to expand...
Click to collapse
Make a factory reset. The deleted folder will be restored.
OR
Reflash ROM
Ok. Got the folder back. Fixed the wifi issue also.
Now let me see what problem comes next. Hehe
Thanks alot