Welcome To PacerRom...
So I wanted a stock based rom for the Moto G 2015, for a fast and stable experience with great camera quality and battery life. So I made one. Enjoy!
As I carry on development I start to realise that there is no use updating this rom. On other devices like the LG G2, a stock based roms are popular because of the enhancements LG has made in the framework of the stock rom, like the camera is much better on stock based roms than AOSP, however this isn't really the case with the moto g3, there aren't any significant enhancements to the stock rom since it is AOSP and the only advantage I can think of is 100% stability. But if you are after stability, then CM13 is probably better because it gets nightlies and is pretty bug free, along with more features and enhancements. So for the time being, I won't be developing stock based rom for this device until further notice, but I may make a custom version of CM14 once it is out.
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Features Include:
Root/Busybox
Nexus Launcher
Viper4Android
Gello Browser
Substratum (RRO Theme)
Moto G4 Camera
Deodexed/Zipaligned
Installation:
As you would any other rom. Boot to recovery, wipe system, data, cache and dalvik/art cache, then flash and reboot. Note that the first boot takes a really long time, give it a good 15 to 20 mins. It works for sure on XT1541, but need testers for XT1540-flash at your own risk as I have no idea if the rom works or not for this variant.
Bugs:
Only bug I know of is that double twist for the camera does not work, I am assuming because of the Moto G4 camera. If you find a bug, please inform me.
Special Thanks:
@lost101 For now, this rom is only for XT1541 1gb, if you find it works with other variants please tell me. If they don't, I will push out the rom for other variants as well later on.
@superR
@viper520
@BeansTown106
@Alberto97
If I have missed anyone or if you don't want your work in this rom, please contact me and I will amend it ASAP.
Suggestions for features are welcome.
XDA:DevDB Information
PacerRom, ROM for the Moto G 2015
Contributors
Pacer_456, lost101 SuperR Viper520 BeansTown106
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: Stock Motorola Rom
Version Information
Status: Stable
Created 2016-08-10
Last Updated 2016-08-24
Changelogs
9th August 2016: V1: initial release.
10th August 2016: V1.1: Added Gello and Subsratum. Get theming! Released PacerRom V1.1 for XT1540 for testing
Downloads
Download for V1 (XT1541 only)
Download for V1.1(Working on XT1541, unknown for XT1540--need testers)
Work for xt1544?
walter0157 said:
Work for xt1544?
Click to expand...
Click to collapse
Re read OP. Probably not for now at least.
Downloading now, big rom
Sent from my Vanilla Unicorn Moto G3
Thank you for this rom :good:
Glad to see stock based ROMs.
Great rom..i think this will be my daily rom
Inviato dal mio MotoG3 utilizzando Tapatalk
Awesome to see people like it. Please also tell me what you would like to see in the ROM.
Downloading, will give you a review asap
Camera shortcut?
With no twist for camera gesture, is there any other shortcut besides the lockscreen? Like the "double tap power button" maybe?
A great feature would be to give the option of setting double tap power button to either change ringer to vibrate only or launch the camera. ?
thinkking said:
With no twist for camera gesture, is there any other shortcut besides the lockscreen? Like the "double tap power button" maybe?
A great feature would be to give the option of setting double tap power button to either change ringer to vibrate only or launch the camera. ?
Click to expand...
Click to collapse
I will look into it, thanks for the feedback.
Awesome, about time we had a stock based custom ROM
I have XT1541 2gb... should work right?
Could you look into advanced reboot
Sent from my Vanilla Unicorn Moto G3
jikobutsu said:
Awesome, about time we had a stock based custom ROM
I have XT1541 2gb... should work right?
Click to expand...
Click to collapse
I am not sure, you could try and report back, apparently that was the case with other stock based ROMs.
robot_head said:
Could you look into advanced reboot
Click to expand...
Click to collapse
I looked and I only could find an xposed module. If you know then please tell me, I will promptly look into it.
So far woking fine on 2 GB version. Love the Nexus launcher, very smooth and clean.
jikobutsu said:
So far woking fine on 2 GB version. Love the Nexus launcher, very smooth and clean.
Click to expand...
Click to collapse
Awesome, will update OP soon.
Note to all, a new update is coming soon. Who likes to theme?
works very good thank you
Skickat från min MotoG3 via Tapatalk
Related
What is NamelessROM?
NamelessROM Gerrit Review
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
See the screenshots in the 3rd post, and visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
ANNOUNCEMENT: We are looking for Device Maintainers to expand our support, please visit our IRC channel or PM @Evisceration, or @jumoog for information.
Disclaimer
#include <std_disclaimer.h>
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
Got a bug report? Want to request a feature? Need extended support?
NamelessROM Forums
Google+ Community
Click to expand...
Click to collapse
Installation Instructions
FROM OTHER ROMS
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Profit
UPDATE FROM NamelessROM TO NEWER RELEASE
Just download the zip and flash it. You will NOT need to wipe anything.
OTA Updater is work in progress and will be available soon!
Click to expand...
Click to collapse
Contributions and Credit
Android/Google/AOSP
AOKP
AOSPA
CyanogenMod
OmniROM
SlimROMs
ALL OF OUR AWESOME TESTERS
Click to expand...
Click to collapse
Downloads
ROM
See DevDB download section for the initial build
Nightlies can be found HERE
Gapps
Banks Gapps
Source
NamelessROM Source
Kernel Source
Click to expand...
Click to collapse
XDA:DevDB Information
NamelessROM 4.4.4, ROM for the LG Optimus 4X HD
Contributors
laufersteppenwolf
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: Latest Recovery
Version Information
Status: Stable
Created 2014-01-26
Last Updated 2014-07-05
Reserved
Features List
CyanogenMod base
DarkUI Toggle
Non-Intrusive Call UI
Theme Manager
Lockring Battery level
Contextual Notification Headers
Custom ClearAll Recents button location
Circular Memory Indicator in Recents
Custom Battery icons
Statusbar Customizations
Custom QuickToggles
koush's Superuser
optimized kernels
Lockscreen See-Through
Lockscreen Blur
Charging Sounds (sounds when plugged/unplugged)
Custom LED Settings
Keyboard Cursor Control (with volume keys)
Volume Button Music Track Skip
Volume Button Wake
DeviceControl <- DeviceSettings app created from the ground-up by our own @Evisceration !
Much more that I can't remember off the top of my head
Just flash the ROM and see for yourself
Click to expand...
Click to collapse
Still uploading, but will be online soon
Screenshots (taken from the N5)
can you explain what future included ?
Thanks for this new ROM !
Sent from my LG-P880 using XDA Premium 4 mobile app
Give some infos and feeling about this rom.
I am just looking to install an KK rom
But I have no idea which one :S
Anyway, tnx for a new rom :thumbup:
Sent from www.callofgods.de | www.gloryofgods.com
Alright, build uploaded
Happy flashing
Nice, another ROM !!
you guys keep surprising us
looks awesome but in curious as to how white is this ROM I'm gonna test
Sent from my LG-P880 using Tapatalk
so verry good rom
good speed
good baterry
smooth
NOW IF it posible put this extras and rom be super AMAZING
ACTIVE NOTIFICATIONS
WAKELOCK BLOCKER
SYSTEM APP REMOVER
BREATHING MISSED CALL
BREATHING SMS
Proud To be an LG O4X User
Now we have more than 10 kitkat custom Rom online.Thank you all Devs online.
Where can i set the volume button wake? I didn't find it in settings...
Btw. Nice Rom , hope to see more:thumbup:
Sweet Mother of God 1.89 GHz OC ??????or just screenshot from another device?
Edit :yep I didnt read carefully XD
gerciolisz said:
Sweet Mother of God 1.89 GHz OC ??????or just screenshot from another device?
Click to expand...
Click to collapse
It's a Nexus 5 screenshot.
Sent from my Nexus 7 using xda app-developers app
This ROM looks extremely interesting!
Version Status at the bottom of OP says Stable? Shouldn't we get through the nightlies first?
in many years that I flash custom rom,I've noticed that the meaning of the word "stable" is relative :
for some people,a rom is stable when it doesn't have random reboot,even if something isn't working (like camera etc.)
For me a rom is stable when everything works or the things that don't work can be fixed in an easy way (like radio support o cm based rom using spirit FM) so a stable custom rom for me is like the stock one,but it work better in terms of performance and or battery life.
LG Optimus 4x HD (p880)
ROM : Cyanogenmod Stable 10.1.3 (4.2.2)
Kernel : iodakX3 v9 (3.1.10)
so far its blazing fast !
moss20 said:
For me a rom is stable when everything works or the things that don't work can be fixed in an easy way (like radio support o cm based rom using spirit FM) so a stable custom rom for me is like the stock one,but it work better in terms of performance and or battery life.
Click to expand...
Click to collapse
Same here, that's why I'm still holding on to CM 10.1.3 Stable. But I can't keep myself away from KitKat much longer.. So I wanted to ask if this one's stable enough to get me through the day?
Im having Clock FC .. It doesnt start.. Also Gmail FC...
Since the previous thread has been closed by fourm moderator for being too clumsy, i have created a new thread for the Lollipop ROM built from mijuu source. /*IM JUST MAINTAINING THIS THREAD. IM NOT BUILDING!!*/
Code:
/*
* ~ Please READ ME ~
*
* I do not guarantee any successful flashing. I am not responsible
* for bricked devices, dead SD cards, or a broken device. YOU are
* choosing to make these modifications, and if you point the finger
* at me for messing up your device, I will laugh at you. But I will try
* my best to explain all the necessities, so you won't mess up your Device.
*
* ~ END OF AGREEMENT ~
*/
Instructions:
! Download the zip file
! Make sure you have atleast 50% battery left
! Make sure you have backed up your current rom
! factory reset your device, erase delvik cache and format /system (if you are using philz recovery, use clean to install new rom)
! flash the ROM zip, GApps zip and SuperSU zip (preferably in this order)
! First boot takes around 10 - 15 minutes. Its normal.
New in V6
Coustamize navigation bar
Coustamize lockscreen shortcuts
Coustamize Quick Settings panel
Video Recording and Playback Works (working for me...)
Theme Engine works
Rom Download :
V1 - 18/12/2014
V2 - 23/12/2014
V3 - 31/12/2014
V4 - 05/01/2015
V5 - 13/01/2015 Mirror - MEGA
V6 - 03/02/2015 Mirror - MEGA
Gapps Download :
BaNkS minimal GApps for Lollipop
To Root :
SuperSU v2.45
Recovery Download :
philz_touch_6.43.4-moto_msm8960.img
XDA:DevDB Information
Mijuu CyanogenMod, ROM for the Motorola Atrix HD
Contributors
Aingaran, mijuu, IronTechmonkey
Source Code: https://github.com/mijuu/android_kernel_motorola_msm8960-common
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Unlocked Bootloader and Lollipop supported recovery
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: V6
Beta Release Date: 2015-02-03
Created 2015-02-07
Last Updated 2015-02-06
Good call on a new thread for this.
Might want to clarify though - your title lists mb886, but this is actually built on the old unified msm8960-jbbl source
ssuds said:
Good call on a new thread for this.
Might want to clarify though - your title lists mb886, but this is actually built on the old unified msm8960-jbbl source
Click to expand...
Click to collapse
First built was built from old unified msm8960-jbbl source. But later @Technofreak contacted @mijuu with the correct partition size and he updated it. Still it can be used for other msm8960_jbbl devices. Im not sure about Razr M though...
For more detail, Read comments in this Link
Aingaran said:
First built was built from old unified msm8960-jbbl source. But later @Technofreak contacted @mijuu with the correct partition size and he updated it. Still it can be used for other msm8960_jbbl devices. Im not sure about Razr M though...
For more detail, Read comments in this Link
Click to expand...
Click to collapse
I'm well aware of the partition size deal. If you take a look at the code, the common qcom source has been changed to reflect this. As you can see below, the old lines are commented out and the partition size is set to match the AHD.
Code:
#BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1560281088
#Atrix HD is 1283719168
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1283719168
More info here. As the source you've linked in your OP shows (and even the rom image filenames), this IS unified msm8960-jbbl source, not mb886 source.
Let me start off with this:
I do have the same problem with playing back videos from using dhacker's/official-cm12 source as well as screen casting.
WIth Mijuu's these issues don't even exist.
I wonder whats going to happen when 5.1 comes out, its supposed to fix some lag and memory management issues and random crashing.
Think about his source with that new version bump. Its going to be cool.
Nice and clean thread bro. Thanks
Sent from my SM-T320 with Tapatalk 4
finally a seprate thread now hwo is gonna maintain blisspop ? mijuu is kinda slow
I can maintain that too... Is that updated regularly?
Sent from my ATRIX HD using XDA Free mobile app
Aingaran said:
I can maintain that too... Is that updated regularly?
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
Yes, @nprev420 maintains it through droid razr forums, he just recently updated it to 2.0.
Justatechie said:
Yes, @nprev420 maintains it through droid razr forums, he just recently updated it to 2.0.
Click to expand...
Click to collapse
I created a Thread for that too... here is the Link
Can abybody tell me, how to customize lockscreen shortcuts here, please? I have somehow lost my "dialer" shortcut from the lockscreen - and cannot bring it back ((
i must say mijuu did a great job introducing us the taste of lollipop when all we were hoping for official kit kat update, lollipop dont make me wanna try kitkat no more, i flashed the 23-12-2014 and using it as a daily driver with minor bugs here and there, he is making a great effort to contribute to the atrix hd family, thanks mijuu for everything.
ps:can anyone tell me if i update from 23-12 to 3-02 will i see a huge difference??
i really some customization options i hope mijuu shows up with it as no other rom is stable enough i might give blisspop a try or wait for a stable rom. thank you XDA DEVELOPERS
Legza said:
Can abybody tell me, how to customize lockscreen shortcuts here, please? I have somehow lost my "dialer" shortcut from the lockscreen - and cannot bring it back ((
Click to expand...
Click to collapse
settings, security ,lockscreen
Hassan Aftab said:
i must say mijuu did a great job introducing us the taste of lollipop when all we were hoping for official kit kat update, lollipop dont make me wanna try kitkat no more, i flashed the 23-12-2014 and using it as a daily driver with minor bugs here and there, he is making a great effort to contribute to the atrix hd family, thanks mijuu for everything.
ps:can anyone tell me if i update from 23-12 to 3-02 will i see a huge difference??
i really some customization options i hope mijuu shows up with it as no other rom is stable enough i might give blisspop a try or wait for a stable rom. thank you XDA DEVELOPERS
Click to expand...
Click to collapse
Yes the latest one is pretty much stable for normal use.. you will see some random reboots if use it heavily.. greenify will help you to avoid reboots..
how is the battery life in latest mijuu rom compared to others ?
mega_man said:
how is the battery life in latest mijuu rom compared to others ?
Click to expand...
Click to collapse
i got around 8hrs of screen on time.. and more than 2 days on normal usuage... i have EB 40
This build is much much quicker than standard CM12
Any updates yet?
TecknoFreak said:
Any updates yet?
Click to expand...
Click to collapse
nope.... nothing yet...
Can someone try PDA tether and see if the USB tether works?
DISCLAIMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
I am not from the official Team of LiquidSmooth. So dont expect official support here :good:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
Enjoy the Smoothness of LiquidSmoothBUGS:
GPS not working will try to fix
Slimpie forcecloses bug in liquidsmooth source code
Installation Instructions:
1. Download ROM
2. Reboot into recovery [ TWRP 2.8.6.0+ highly recommended]
3. Please back up your ROM before you begin!
4. You need a full wipe
5. Flash the ROM
6. Flash 5.1.x Gapps
7. Reboot
8. It will take a while at first boot.
Click to expand...
Click to collapse
DOWNLOAD:
AndroidFileHost
GAPPS:
OPENGAPPS-ALWAYS LATEST
Special thanks to: @rap_turkez @Orion116 @mcgi5sr2 @JustArchi
XDA:DevDB Information
LiquidSmooth Lollipop for i9300, ROM for the Samsung Galaxy S III I9300
Contributors
singhhacker
Source Code: https://github.com/liquidsmooth
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP, CyanogenMod, SlimRoms
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2015-10-13
Created 2015-10-13
Last Updated 2015-10-27
Reserved
was looking for a new rom to flash......downloading now
Good Build. thank you @singhhacker
guys new build is up
it will fix many device specific issues and some random reboots that i faced
flash it and report me
Report after flashing
Fast and smooth so far but...no GPS Signal at all? any fix or update? Thank
Thanx...
thechosenone43 said:
Report after flashing
Fast and smooth so far but...no GPS Signal at all? any fix or update? Thank
Click to expand...
Click to collapse
Which build u r using old or new?
Can someone confirm if gps is working on build 1?
Sent from my GT-I9300 using Tapatalk
Latest build from 2015-10-14 with 5.1 gapps. Clean flash of course from another ROM.
Well not so smooth for me I waited like 5-10 mins in the flash screen ( TWRP 2.8.6.1 ) and then gave up. Used the last 1014 build.
EDIT: Going to redownload and give it another try.
Pleasantly surprised that you set selinux to permissive in the new build, now exposed works like a charm. Thanks.
Does GPS work for you in this build? And if yes what did you do to make it work. Thanks
thechosenone43 said:
Does GPS work for you in this build? And if yes what did you do to make it work. Thanks
Click to expand...
Click to collapse
it will be fixed in next build
thanks for reporting
any other bug guys?
For me, enabling HW+ in MX results in no video playback, which seems to affect YouTube as well.
Without enabling it, video plays fine.
New build is up . Flash and report
mobile data and some other bugs fixed
I just installed your ROM + open gapps pico on a clean flash with twrp 2.8.6.1
Everything is working except the MMS with stock app but it works with google messenger.
I tried to install boeffla sound app but your kernel doesn't support it.
Therefore as I saw that selinux was set to enforcing, I decided to install Archikernel to get benefit of boeffla sound. It works.
I did untutu benchmark :
Stock kernel 25300 (default settings)
Archikernel 28900 (default settings + touchwake enabled)
It looks like phone function is working fine without any delay but need time to be sure.
Xposed v75 sdk22 arm installed and working with my modules without any troubles.
I will try GPS tomorrow.
Good job mate. Thanks.
Please Report about GPS working? thanks in advance
So no issues at all in this latest build? (Except that MMS that you noted)
Sent from my GT-I9300 using Tapatalk
I didn't noticed any other issue. Now I'll try the GPS in few minutes and I will report.
Edit: one issue that I forgot to report but I guess it's from slimlp source about the launcher. When I press home button, it switches always between page0 and homepage. Not a big deal anyway.
Also, I forgot a detail which is important for some of us regarding the flash light. The torch is not switching off when the screen turn off. Good point in my opinion.
---------- Post added at 07:02 AM ---------- Previous post was at 06:23 AM ----------
And the sad news is that the gps is not working. Setting selinux to permissive will not do much. It's a "no go" for me at the moment. I need working GPS. I will try next build if problem is solve.
I will try to fix gps in next build
Sent from my GT-I9300 using Tapatalk
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.
Downloads
CyanogenMod
Latest Release 11-23-2016
cm-13.0-20161123-UNOFFICIAL-ailsa_ii.zip
OpenGapps (use an ARM64, 6.0 zip) - now on tap needs mini or higher.
Source
Device tree
Kernel Source
Proprietary vendor
XDA:DevDB Information
CyanogenMod 13, ROM for the ZTE Axon 7
Contributors
Unjustified Dev, DrakenFX
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Beta Release Date: 2016-11-23
Created 2016-09-08
Last Updated 2016-11-23
Reserved
Status
Working
Audio (Minor distortion with playback and mic)
Camera
Double tap to wake
Fingerprint Sensor
GPS (Not using QC location)
NFC
Radio
Sensors
Wifi/Bt
Not Working
Changelog
20161123
Added doze options kanged from oneplus3 (Ambient display)
Use akm speaker path (fixes major audio distortion)
20161122
Added 32bit sensors from ZTE (fixes camera)
Enabled UI blur
Enabled Factory reset protection
Lowered minimum brightness
Enabled doze
Add carrier settings (global and cdma)
Re-enable clang build
Switched to opensource audio
20161017
Add keydisabler (switch between virtual and software keys)
Add audio amplifier (start the amplifier)
Fix NFC (Updated config and firmware)
20161009
Fixed fingerprint sensor
Initial Beta Release
20160908
Initial test release
Reserved
This is awesome, can't wait to help out with this!
xxBrun0xx said:
This is awesome, can't wait to help out with this!
Click to expand...
Click to collapse
It's ready to download and test. For anyone asking for directions, I will not provide them yet as it's for testing and debugging only.
Do we have a way to get back to stock after flashing this?
xxBrun0xx said:
Do we have a way to get back to stock after flashing this?
Click to expand...
Click to collapse
You backup your stock rom before installing !
xxBrun0xx said:
Do we have a way to get back to stock after flashing this?
Click to expand...
Click to collapse
Make sure to Back Up all things!
http://forum.xda-developers.com/showpost.php?p=68587621&postcount=98
xxBrun0xx said:
Do we have a way to get back to stock after flashing this?
Click to expand...
Click to collapse
And for your safety ,I'll recommend you to wait full a more stable/full functional release if you don't know how to do what you ask.
P.S. not been rude here ,just trying to save you a hassle/lot of headaches/etc/etc
DrakenFX said:
And for your safety ,I'll recommend you to wait full a more stable/full functional release if you don't know how to do what you ask.
P.S. not been rude here ,just trying to save you a hassle/lot of headaches/etc/etc
Click to expand...
Click to collapse
Factory images are my go to, but I know we don't have any so figured I'd ask.
Awesome, just flashed it on my device. Let me know if there's any way we can help !
Pollito788 said:
Awesome, just flashed it on my device. Let me know if there's any way we can help !
Click to expand...
Click to collapse
Provide a logcat
Could you test things like radio,nfc,fingerprint etc basically things I list as non working
Hey Unjustified, good to see you over on the Axon 7 side! You got the development started for the Idol 3, so it'll be great to see what you can start for the Axon 7 as well! Awesome work! :good:
A question to the devs or anyone knowledgeable. Is it just a time thing, before the not working stuff is figured out? Or is there a legitimate chance that stuff just won't work because we are missing stuff from ZTEs side?
Sent from my Nexus 4 using Tapatalk
I don't know how to said these but I'm gonna try [emoji16]
Is ain't better or easier to work whit the stock rom an give it some tweaks and debloat it ... a would think it won't be so bad on battery or more stable I'm probly wrong can some one xplain me
Sent from my SM-N900A using XDA-Developers mobile app
There seems to be a topic in ZTE that we will see another OTA update tomorrow. Can people with unlocked bootloaders from ZTE will be able to install the OTA update?
Well, that does it, I'm going on Amazon
Sent from my ASUS_Z008 using XDA-Developers mobile app
justamar24 said:
There seems to be a topic in ZTE that we will see another OTA update tomorrow. Can people with unlocked bootloaders from ZTE will be able to install the OTA update?
Click to expand...
Click to collapse
This question is not pertinent to this topic (this topic is about CM, not official OTAs), but we don't know, we'll have to wait and see.
tupirujp said:
I don't know how to said these but I'm gonna try [emoji16]
Is ain't better or easier to work whit the stock rom an give it some tweaks and debloat it ... a would think it won't be so bad on battery or more stable I'm probly wrong can some one xplain me
Sent from my SM-N900A using XDA-Developers mobile app
Click to expand...
Click to collapse
ZTE hasn't released the full ROM image yet......so nobody can work with the stock ROM yet. Hopefully soon......Until then, CM is different and not "stock" ZTE, they take what they have and adapt to make it work on different devices.
The rom is done 80%, it boots, but I need someone to test it with his phone too to be 100% that everything is working.
EMUI VERSION
ABANDONED PROJECT
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FEATURES OF THE ROM
-New boot UI(but I don't know if this will be in final version)
-Bloatware removed
-Proffesional camera app; light painting and that stuff added
-Google Now Launcher(because emui=ugly) and kernel adiutor added(but NO ROOT, because I know about the Snapchat problem) TIP: TO MAKE SNAPCHAT WORKING INSTALL SNAPCHAT, LOG IN, THEN REBOOT AND INSTALL ROOT
-Advanced Reboot
What is not working:
-Wifi(sees all networks but when I try to connect it fails and says: The connection to"network" has expired. The connection has failed.
-I have a problem with Huawei Swype Keyboard. At first boot when I try to type something the keyboard doesn't show. After skipping everything in first boot of the os you need to go to -Settings-Advanced Settings-Language and tiping methods-There you press on Default Keyboard, then select Google Keyboard or how it's named, I forgot.
-Bluetooth- same problem as wifi; maybe even worse, whe you press on Activate bluetooth, after 10 seconds it goes off again.
I have not tested everything because at the same time I am working and on The CyanogenMod 12.1 EmuiMix. This is the Modded Emui EmuiMix.
I do not not when I will release the CyanogenMod EmuiMix, I'm kinda mad that I need to fix the Wifi and Bluetooth, and on CM I need to fix A LOT
DOWNLOAD:
Here is the link: https://drive.google.com/open?id=0B-...3dUeHNjYVNxWUU . If it doesn't work, tell me.
INSTRUNCTIONS - READ VERY CAREFULLY!
1.Download zip from the link
2.Hold power+vol up+ vol down to get into TWRP
3.Click on "Wipe" and slide to wipe the system ---------Normal wipe doesn't wipe all data(music,photos...) just some cache what is part of the system
4.Click on install and choose the zip
5.(alert)--DO NOT INSTALL GAPPS AFTER INSTALLATION OF ROM!!! , JUST INSTALL IT AFTER FIRST BOOT SETUP, OTHERWISE THE ROM WILL BREAK!
6.Reboot your phone- ALERT- First boot might take a while, somewhere between 10-15 minutes, just wait, do not panic.
7.Set up your phone how you can; how I said in the problems of this rom is that the keyboard isn't showing= you cannot connect to wifi(but wifi doesn't even work), cannot connect with Google(but if wifi doesn't work I don't know if you can connect with mobile data; so just skip it)
8. After setup, go to -Settings -Advanced Settings -Language and tiping methods -There you press on Default Keyboard, then select Google Keyboard or how it's named, I forgot.
9.(optional). After setup, now you can install Gapps. Go to http://opengapps.org/ , and be sure to download ARM64-6.0- AND CHOOSE Micro, Mini or Full, just these three will work. But installing this package erases old gapps, including google keyboard. Be sure to have in your phone a keyboard .apk because you will have no keyboard.
Again, do not blame me for bricking your phone, losing data, etc SO PLEASE READ THE INSTRUCTIONS CAREFULLY!
If you can help me with fixing the remaining bugs, I would appreciate that A LOT.
I will let a screenshot of the ROM, too.
If you have any questions, please reply to this thread.
Code:
Changelog:
28.03.2017:
-Initial Build
P.S. - I used Omnirom 5.1 files for installing in TWRP, because stock HW roms are made in UPDATE.APP format, maybe I will do a custom one at a time
So don't panic if it says in TWRP "OMNI" and "Enjoy Omnirom!" because it is not Omnirom.
XDA:DevDB Information
[ROM] [UNOFFICIAL] EmuiMix for Kirin Huawei ALE-L21, ROM for the Huawei P8lite/P8 Lite
Contributors
hi6120sft ale-l21
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod 12.1 and EMUI
Version Information
Status: Abandoned
Beta Release Date: 2017-03-30
Created 2017-03-26
Last Updated 2017-03-30
Be careful, placeholder threads aren't accepted on development
Edit: But still, sound pretty interesting
Based on CyanogenMod 12.1? Or emui? Confused lol.. any bit of information on what you're working on? ?
D1stRU3T0R said:
CM12. 1? EMUIMIX? Something is wrong, at least develop on LineAgeOS 14.1, or vase rom with some improvements... Better ideea would be to only help others, like haky and XePealato to build, they have the 2 main roms
Click to expand...
Click to collapse
Yes, I like the name EMUIMIX for this rom.
Best wishes to you in this
Zizo17 said:
Best wishes to you in this
Click to expand...
Click to collapse
Thx, that means a lot
Good luck! But I've got a small question. Wouldn't it be better to all developers work together? Like we have like 4+ different roms so IMHO it would be better together right? It would make the progress faster... But I'm not a programmer or a professional so pls don't hate me. I'm just curious.
PS: I don't want rushed things etc and I respect you guys (doing stuff for our device)
Thanks
filiplongac said:
Good luck! But I've got a small question. Wouldn't it be better to all developers work together? Like we have like 4+ different roms so IMHO it would be better together right? It would make the progress faster... But I'm not a programmer or a professional so pls don't hate me. I'm just curious.
PS: I don't want rushed things etc and I respect you guys (doing stuff for our device)
Thanks
Click to expand...
Click to collapse
That ACTUALLY would be better, but not all developers want to make a team
These Kirin devices are a headache, not like the snapdragon phones when you can make a stable custom rom in a day.
NEWS:
News: I have found out and a old project of mine based on Emui, what I am going to post it too here
So there will be 2 versions of EmuiMix:
1. Modded Emui(Today I need to make some pathces, less bugs, maybe even release today a beta if I finish my work)
2.CyanogenMod 12.1 (Android 5.1.1, with many bugs; needs a lot of time to fix)
hi6120sft ale-l21 said:
News: I have found out and a old project of mine based on Emui, what I am going to post it too here
So there will be 2 versions of EmuiMix:
1. Modded Emui(Today I need to make some pathces, less bugs, maybe even release today a beta if I finish my work)
2.CyanogenMod 12.1 (Android 5.1.1, with many bugs; needs a lot of time to fix)
Click to expand...
Click to collapse
Why don't you use LineageOs 14.1 repo by XePeleato or AOSP by Haky 89 and help them with fixing bugs?
xdk78 said:
Why don't you use LineageOs 14.1 repo by XePeleato or AOSP by Haky 89 and help them with fixing bugs?
Click to expand...
Click to collapse
Because they're hard. Maybe in the future. I'm just a starter developer
hi6120sft ale-l21 said:
Thx, that means a lot
Click to expand...
Click to collapse
Hats off for your kindness relpy ?
Thread lacks a valid download link. Please PM me with the link, when there is a valid download available and I will reopen the thread. Until then this is a placeholder.
Should you wish, you may post an early Alpha version for the members to test and give feedback.
Thread reopened.
Here is the screenshot:
So simply said, it's a deodexed stock EMUI like one of the Sokobban's ROM or what is the main difference?
Nice work and Good luck m8 !
filiplongac said:
So simply said, it's a deodexed stock EMUI like one of the Sokobban's ROM or what is the main difference?
Nice work and Good luck m8 !
Click to expand...
Click to collapse
Yes, I modded stock Emui.
hi6120sft ale-l21 said:
Yes, I modded stock Emui.
Click to expand...
Click to collapse
And what build was used in this ROM? Or it doesn't matter? Because I think some newer builds have new improvements etc...
filiplongac said:
And what build was used in this ROM? Or it doesn't matter? Because I think some newer builds have new improvements etc...
Click to expand...
Click to collapse
What "build" are you talking about?
If you are talking about what emui, I am using stock EMUI 4.0
.4.1 was also a option for me, but 4.1 doesn't work on all carriers.
hi6120sft ale-l21 said:
Yes, I modded stock Emui.
Click to expand...
Click to collapse
hi6120sft ale-l21 said:
What "build" are you talking about?
If you are talking about what emui, I am using stock EMUI 4.0
.4.1 was also a option for me, but 4.1 doesn't work on all carriers.
Click to expand...
Click to collapse
I meant f.e. B589 etc. Or there isn't any?
filiplongac said:
I meant f.e. B589 etc. Or there isn't any?
Click to expand...
Click to collapse
Ah, I forgot, I got what you try to say. I will tell you tomorrow what build is.