CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.
Downloads
CyanogenMod
Latest Release 11-23-2016
cm-13.0-20161123-UNOFFICIAL-ailsa_ii.zip
OpenGapps (use an ARM64, 6.0 zip) - now on tap needs mini or higher.
Source
Device tree
Kernel Source
Proprietary vendor
XDA:DevDB Information
CyanogenMod 13, ROM for the ZTE Axon 7
Contributors
Unjustified Dev, DrakenFX
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Beta Release Date: 2016-11-23
Created 2016-09-08
Last Updated 2016-11-23
Reserved
Status
Working
Audio (Minor distortion with playback and mic)
Camera
Double tap to wake
Fingerprint Sensor
GPS (Not using QC location)
NFC
Radio
Sensors
Wifi/Bt
Not Working
Changelog
20161123
Added doze options kanged from oneplus3 (Ambient display)
Use akm speaker path (fixes major audio distortion)
20161122
Added 32bit sensors from ZTE (fixes camera)
Enabled UI blur
Enabled Factory reset protection
Lowered minimum brightness
Enabled doze
Add carrier settings (global and cdma)
Re-enable clang build
Switched to opensource audio
20161017
Add keydisabler (switch between virtual and software keys)
Add audio amplifier (start the amplifier)
Fix NFC (Updated config and firmware)
20161009
Fixed fingerprint sensor
Initial Beta Release
20160908
Initial test release
Reserved
This is awesome, can't wait to help out with this!
xxBrun0xx said:
This is awesome, can't wait to help out with this!
Click to expand...
Click to collapse
It's ready to download and test. For anyone asking for directions, I will not provide them yet as it's for testing and debugging only.
Do we have a way to get back to stock after flashing this?
xxBrun0xx said:
Do we have a way to get back to stock after flashing this?
Click to expand...
Click to collapse
You backup your stock rom before installing !
xxBrun0xx said:
Do we have a way to get back to stock after flashing this?
Click to expand...
Click to collapse
Make sure to Back Up all things!
http://forum.xda-developers.com/showpost.php?p=68587621&postcount=98
xxBrun0xx said:
Do we have a way to get back to stock after flashing this?
Click to expand...
Click to collapse
And for your safety ,I'll recommend you to wait full a more stable/full functional release if you don't know how to do what you ask.
P.S. not been rude here ,just trying to save you a hassle/lot of headaches/etc/etc
DrakenFX said:
And for your safety ,I'll recommend you to wait full a more stable/full functional release if you don't know how to do what you ask.
P.S. not been rude here ,just trying to save you a hassle/lot of headaches/etc/etc
Click to expand...
Click to collapse
Factory images are my go to, but I know we don't have any so figured I'd ask.
Awesome, just flashed it on my device. Let me know if there's any way we can help !
Pollito788 said:
Awesome, just flashed it on my device. Let me know if there's any way we can help !
Click to expand...
Click to collapse
Provide a logcat
Could you test things like radio,nfc,fingerprint etc basically things I list as non working
Hey Unjustified, good to see you over on the Axon 7 side! You got the development started for the Idol 3, so it'll be great to see what you can start for the Axon 7 as well! Awesome work! :good:
A question to the devs or anyone knowledgeable. Is it just a time thing, before the not working stuff is figured out? Or is there a legitimate chance that stuff just won't work because we are missing stuff from ZTEs side?
Sent from my Nexus 4 using Tapatalk
I don't know how to said these but I'm gonna try [emoji16]
Is ain't better or easier to work whit the stock rom an give it some tweaks and debloat it ... a would think it won't be so bad on battery or more stable I'm probly wrong can some one xplain me
Sent from my SM-N900A using XDA-Developers mobile app
There seems to be a topic in ZTE that we will see another OTA update tomorrow. Can people with unlocked bootloaders from ZTE will be able to install the OTA update?
Well, that does it, I'm going on Amazon
Sent from my ASUS_Z008 using XDA-Developers mobile app
justamar24 said:
There seems to be a topic in ZTE that we will see another OTA update tomorrow. Can people with unlocked bootloaders from ZTE will be able to install the OTA update?
Click to expand...
Click to collapse
This question is not pertinent to this topic (this topic is about CM, not official OTAs), but we don't know, we'll have to wait and see.
tupirujp said:
I don't know how to said these but I'm gonna try [emoji16]
Is ain't better or easier to work whit the stock rom an give it some tweaks and debloat it ... a would think it won't be so bad on battery or more stable I'm probly wrong can some one xplain me
Sent from my SM-N900A using XDA-Developers mobile app
Click to expand...
Click to collapse
ZTE hasn't released the full ROM image yet......so nobody can work with the stock ROM yet. Hopefully soon......Until then, CM is different and not "stock" ZTE, they take what they have and adapt to make it work on different devices.
Related
This Kanged CM9 Alpha build is a free, community built, aftermarket firmware distribution of Android 4.0 (ICS), which is designed to increase performance and reliability over stock Android for your device.
Code:
**[B][COLOR="Red"][SIZE="3"]Disclaimer[/SIZE][/COLOR][/B]**
* these are alphas so understand that means things are broken
*
* I am not part of the Cyanogenmod Team
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* Change Logs Disabled during alpha, please read thread.
[B][U][SIZE="3"]Stages[/SIZE][/U][/B]
* [B]Alpha[/B]- means something major is broken. Goal is to get major stuff working
* [B]Beta[/B]- means little things are still broke but most big stuff is fixed. Goal to clean up code and fix little issues so we can submit to cm to become official
* [B]Stable[/B]- official cm rom.
* [B]After stable[/B]- tweaking, Also adding features.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 9?, or coming from another ROM?
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash This ROM.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 9?
Flash CyanogenMod
flash gapps
Wanna downgrade, simply wipe
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
ROM: Link
Latest version: check site
Click to expand...
Click to collapse
Gapps: Link
Latest version: check site
Click to expand...
Click to collapse
Other
Credits:
joxersax11 turl alpha18omega shabbypenguin ebbinger_413 sky24987 DethMetalz69 cougarcougar Focus.lau mrinehart93 Cyanogenmod Team koush/romracer shabbypenguin - ranmasaotome510 - updated OP
Click to expand...
Click to collapse
The Photon dev team and turl would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
WOW! 3 CM9 thread in this forum, EPIC!
How to understand which one is for atrix? Or everything in your link is for atrix?
will this build have the cyanogenmod options to change the notification power widget? Or is that not part of the build yet?
Look for atrix, but wait on downloading till its done
Edit I just noticed that server cuts off the name. Its alpha1, I'll make separate folders on the next update.
Nipit said:
How to understand which one is for atrix? Or everything in your link is for atrix?
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
What's the difference between this rom and other which was posted today?
Well this rom has no changes from the photon yet. I'm simply trying to get a booting build as a base, but its the latest cm9 source.
Nipit said:
What's the difference between this rom and other which was posted today?
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Does HW acceleration work in this rom?
nice work thank you!
Thank you!!!
Enviado desde mi Motorola Atrix
My bestfriend has a photon. Its like having being pregnant together . /tear
Sent from my MB860 using XDA App
Could someone at least tell me if it boots, and a detailed what works what doesn't
Sent from my MB855 using XDA App
(delete comment)
jokersax11 said:
Could someone at least tell me if it boots, and a detailed what works what doesn't
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
many of atrix geeks as me are testing another port of yor rom. Can you collaborate with alpha18omega to make one porting project?
jokersax11 said:
Could someone at least tell me if it boots, and a detailed what works what doesn't
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
In another CM9 thread, some said the battery indicator disappeared when fully charged.
Flashed it.
Bootanimation - yes!
Boots? - yes!
First crash'n'stuck on "M" was after 5 seconds of working, when I choose language. Does it hate russian?
Removed battery, restart... work log:
Boot - check!
Firststart setup - check!
Wi-Fi - check! (without reboot)
Camera - NOT WORKING (as I remember it isn't working in Photon too, so no surprise)
Browser - check!
Google Maps - check!
Epic cosplay lesbian porn - nope! (need to fix it)
Mobile data - check!
Phone calls - check!
SMS - check!
Youtube - check!
3D Games (Modern Combat) - check!
Auto-rotate - check!
Auto-brightness - not shure
Work rather stable - no reboots after the fist one. Phone is hot a little bit.
Maybe it is placebo, but looks like this rom is a little faster. Bad thing is that now internal card is emmc now - not good want oldschool!
nok07635 said:
In another CM9 thread, some said the battery indicator disappeared when fully charged.
Click to expand...
Click to collapse
Another CM9 build by photon dev team has the same problem too
Going to install tonight after work and i'll do a detailed check of what works and what doesn't and i'll post logcats of what I feel is relevant.
Sent from my MB860 using xda premium
Got this installed and so far its been working great
Sent from my MB860 using XDA App
long live the dev team......dude lets have some beer
While you guys are waiting for a working CM11, here's a source built optimized light weight CM10.
CyanogenMod 10 is a free, community built, aftermarket firmware distribution of Android 4.1.2 (Jellybean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
These builds are compiled with Linaro toolchain which provides improved performance and increased battery life.
This ROM is a slimmed down lightweight version.
WHAT WORKS
Everything seems to work except for WiFi
DOWNLOADS
http://forum.xda-developers.com/devdb/project/?id=5719#downloads
THANKS TO
[email protected]_prince ( For the device and kernel trees and for compiling the original ROM )
- @nikhil16242 ( For fixing Multitouch problem / Prompt Testing )
- @solk2 ( For fixing WiFi )
- Whole Cyanogenmod Development Team
- The XDA team
XDA:DevDB Information
Unofficial CyanogenMod 10(Linaro builds), ROM for the HTC Desire C
Contributors
rudi_j7
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2014-09-07
Last Updated 2014-09-07
Mine.
What you think about pureperfomance mod on this rom?
nemanjsb said:
What you think about pureperfomance mod on this rom?
Click to expand...
Click to collapse
Well, it would only help.
Sent from my Moto G using XDA Premium 4 mobile app
In regards to WiFi not working, how exactly is it not working, is it the switching off when screens off or completely not working?
intel007 said:
In regards to WiFi not working, how exactly is it not working, is it the switching off when screens off or completely not working?
Click to expand...
Click to collapse
Completely not working. There's something that cute_prince modified and didn't add in the device tree it looks like. Anyway, we're working on CM11, so this won't be needed.
Sent from my falcon using XDA Premium 4 mobile app
Did you insert the code patch wifi fix by solk2
http://forum.xda-developers.com/showpost.php?p=42226585&postcount=365
racky29 said:
Did you insert the code patch wifi fix by solk2
http://forum.xda-developers.com/showpost.php?p=42226585&postcount=365
Click to expand...
Click to collapse
Aha! That's what was missing! Anyway, just sent my build environment to self destruct. So I'm not going to re sync CM10 since I'm already working on CM11.
Sent from my falcon using XDA Premium 4 mobile app
racky29 said:
Did you insert the code patch wifi fix by solk2
http://forum.xda-developers.com/showpost.php?p=42226585&postcount=365
Click to expand...
Click to collapse
How i can insert this?
Its a source code patch, patch the code in the github repository when building from source. There is guides available online if you want to build from source and implement a patch
nemanjsb said:
How i can insert this?
Click to expand...
Click to collapse
I can push the source with the patch to Github and link it here so you guys can build yourself. If you want, I can type out a guide if I'm not feeling too lazy.
Sent from my falcon using XDA Premium 4 mobile app
Now if I installed this ROM wi-fi can be fixed or I have to install another one?
szilike93 said:
Now if I installed this ROM wi-fi can be fixed or I have to install another one?
Click to expand...
Click to collapse
Currently, WiFi isn't working. I'm going to implement the patch when I have time. Some time next week.
Sent from my Moto G using XDA Premium 4 mobile app
Okay... I'm patching the tree and kernel to fix wifi today. Then I'll upload the patched tree as zips so anyone can build CM10
EDIT: Done Patching.
FURTHER EDIT: I'll probably build another version with working WiFi sometime this week.
Rudi. Can you post a guide to building this cm10 please
im a bit lost with manifest and prebuilt cm source repo url
i know a bit of the basics, ive done a lot of reading up. But just need to get off the ground.
racky29 said:
Rudi. Can you post a guide to building this cm10 please
im a bit lost with manifest and prebuilt cm source repo url
i know a bit of the basics, ive done a lot of reading up. But just need to get off the ground.
Click to expand...
Click to collapse
Sure. PM me with any questions you might have.
Sent from my A0001 using XDA Premium 4 mobile app
Thanks mate, i will share anything i find and provide all links etc.
Just need that little kick to get me going
rudi_j7 said:
Okay... I'm patching the tree and kernel to fix wifi today. Then I'll upload the patched tree as zips so anyone can build CM10
EDIT: Done Patching.
FURTHER EDIT: I'll probably build another version with working WiFi sometime this week.
Click to expand...
Click to collapse
Hi @rudi_j7 Were you able to build with wifi working? It looked promising
atomomega said:
Hi @rudi_j7 Were you able to build with wifi working? It looked promising
Click to expand...
Click to collapse
I completely forgot about this I was busy with projects for my other devices. I'll see if I can get it to work sometime this week.
EDIT: Sorry, but I've got a hell of a lot of other work so I won't be able to make any progress with this.
Sent from my A0001 using XDA Premium 4 mobile app
Quasar said:
I can push the source with the patch to Github and link it here so you guys can build yourself. If you want, I can type out a guide if I'm not feeling too lazy.
Click to expand...
Click to collapse
do it))
Since the previous thread has been closed by fourm moderator for being too clumsy, i have created a new thread for the Lollipop ROM built from mijuu source. /*IM JUST MAINTAINING THIS THREAD. IM NOT BUILDING!!*/
Code:
/*
* ~ Please READ ME ~
*
* I do not guarantee any successful flashing. I am not responsible
* for bricked devices, dead SD cards, or a broken device. YOU are
* choosing to make these modifications, and if you point the finger
* at me for messing up your device, I will laugh at you. But I will try
* my best to explain all the necessities, so you won't mess up your Device.
*
* ~ END OF AGREEMENT ~
*/
Instructions:
! Download the zip file
! Make sure you have atleast 50% battery left
! Make sure you have backed up your current rom
! factory reset your device, erase delvik cache and format /system (if you are using philz recovery, use clean to install new rom)
! flash the ROM zip, GApps zip and SuperSU zip (preferably in this order)
! First boot takes around 10 - 15 minutes. Its normal.
New in V6
Coustamize navigation bar
Coustamize lockscreen shortcuts
Coustamize Quick Settings panel
Video Recording and Playback Works (working for me...)
Theme Engine works
Rom Download :
V1 - 18/12/2014
V2 - 23/12/2014
V3 - 31/12/2014
V4 - 05/01/2015
V5 - 13/01/2015 Mirror - MEGA
V6 - 03/02/2015 Mirror - MEGA
Gapps Download :
BaNkS minimal GApps for Lollipop
To Root :
SuperSU v2.45
Recovery Download :
philz_touch_6.43.4-moto_msm8960.img
XDA:DevDB Information
Mijuu CyanogenMod, ROM for the Motorola Atrix HD
Contributors
Aingaran, mijuu, IronTechmonkey
Source Code: https://github.com/mijuu/android_kernel_motorola_msm8960-common
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Unlocked Bootloader and Lollipop supported recovery
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: V6
Beta Release Date: 2015-02-03
Created 2015-02-07
Last Updated 2015-02-06
Good call on a new thread for this.
Might want to clarify though - your title lists mb886, but this is actually built on the old unified msm8960-jbbl source
ssuds said:
Good call on a new thread for this.
Might want to clarify though - your title lists mb886, but this is actually built on the old unified msm8960-jbbl source
Click to expand...
Click to collapse
First built was built from old unified msm8960-jbbl source. But later @Technofreak contacted @mijuu with the correct partition size and he updated it. Still it can be used for other msm8960_jbbl devices. Im not sure about Razr M though...
For more detail, Read comments in this Link
Aingaran said:
First built was built from old unified msm8960-jbbl source. But later @Technofreak contacted @mijuu with the correct partition size and he updated it. Still it can be used for other msm8960_jbbl devices. Im not sure about Razr M though...
For more detail, Read comments in this Link
Click to expand...
Click to collapse
I'm well aware of the partition size deal. If you take a look at the code, the common qcom source has been changed to reflect this. As you can see below, the old lines are commented out and the partition size is set to match the AHD.
Code:
#BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1560281088
#Atrix HD is 1283719168
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1283719168
More info here. As the source you've linked in your OP shows (and even the rom image filenames), this IS unified msm8960-jbbl source, not mb886 source.
Let me start off with this:
I do have the same problem with playing back videos from using dhacker's/official-cm12 source as well as screen casting.
WIth Mijuu's these issues don't even exist.
I wonder whats going to happen when 5.1 comes out, its supposed to fix some lag and memory management issues and random crashing.
Think about his source with that new version bump. Its going to be cool.
Nice and clean thread bro. Thanks
Sent from my SM-T320 with Tapatalk 4
finally a seprate thread now hwo is gonna maintain blisspop ? mijuu is kinda slow
I can maintain that too... Is that updated regularly?
Sent from my ATRIX HD using XDA Free mobile app
Aingaran said:
I can maintain that too... Is that updated regularly?
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
Yes, @nprev420 maintains it through droid razr forums, he just recently updated it to 2.0.
Justatechie said:
Yes, @nprev420 maintains it through droid razr forums, he just recently updated it to 2.0.
Click to expand...
Click to collapse
I created a Thread for that too... here is the Link
Can abybody tell me, how to customize lockscreen shortcuts here, please? I have somehow lost my "dialer" shortcut from the lockscreen - and cannot bring it back ((
i must say mijuu did a great job introducing us the taste of lollipop when all we were hoping for official kit kat update, lollipop dont make me wanna try kitkat no more, i flashed the 23-12-2014 and using it as a daily driver with minor bugs here and there, he is making a great effort to contribute to the atrix hd family, thanks mijuu for everything.
ps:can anyone tell me if i update from 23-12 to 3-02 will i see a huge difference??
i really some customization options i hope mijuu shows up with it as no other rom is stable enough i might give blisspop a try or wait for a stable rom. thank you XDA DEVELOPERS
Legza said:
Can abybody tell me, how to customize lockscreen shortcuts here, please? I have somehow lost my "dialer" shortcut from the lockscreen - and cannot bring it back ((
Click to expand...
Click to collapse
settings, security ,lockscreen
Hassan Aftab said:
i must say mijuu did a great job introducing us the taste of lollipop when all we were hoping for official kit kat update, lollipop dont make me wanna try kitkat no more, i flashed the 23-12-2014 and using it as a daily driver with minor bugs here and there, he is making a great effort to contribute to the atrix hd family, thanks mijuu for everything.
ps:can anyone tell me if i update from 23-12 to 3-02 will i see a huge difference??
i really some customization options i hope mijuu shows up with it as no other rom is stable enough i might give blisspop a try or wait for a stable rom. thank you XDA DEVELOPERS
Click to expand...
Click to collapse
Yes the latest one is pretty much stable for normal use.. you will see some random reboots if use it heavily.. greenify will help you to avoid reboots..
how is the battery life in latest mijuu rom compared to others ?
mega_man said:
how is the battery life in latest mijuu rom compared to others ?
Click to expand...
Click to collapse
i got around 8hrs of screen on time.. and more than 2 days on normal usuage... i have EB 40
This build is much much quicker than standard CM12
Any updates yet?
TecknoFreak said:
Any updates yet?
Click to expand...
Click to collapse
nope.... nothing yet...
Can someone try PDA tether and see if the USB tether works?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Introduction:
A friend of mine (Fusionalex) and me were very unsatisfied with the current state of custom ROM development for this - at least concerning the hardware - great device. The maintainer of the official LineageOS has done nothing for months. Fixes for basic issues and features (see our features below) haven't been implemented although the source has been available for years now. For us, switching to one of the numerous bloated Lineage forks (which at least fixed some issues, but brought other unnecessary problems) was no reasonable option. Apart from all the bloat, many of them don't get regular updates anymore, even though major security issues like KRACK or Blueborne have already been fixed in the official Lineage source. There are some great builds out there like CM 13.0 by MrColdbird or 14.1 by OrdenKrieger (from which we took most of the code for the major fixes, a big thank you goes out to you).
So which ROM did we choose? An up-to-date official LineageOS, but extremely bugged? Or a fixed, but incredibly bloated and mostly unstable custom ROM without the latest security patches? We chose to create our own Lineage experience, as close to the official as possible, but with most of the big issues fixed and up to date.
We will continue to update this ROM until LineageOS 15 by OrdenKrieger is stable enough to use as daily drivers.
Click to expand...
Click to collapse
Features:
U-Touch
Headset buttons and headset hook working, especially with Xiaomi headsets
Ambient Display
GLONASS
OTA updates
some customizations to update the user interface, because apparently Google refuses to push its new design in the AOSP source
We are investigating/working on the some more things, just follow our changelog below!
Click to expand...
Click to collapse
Screenshots:
The UI is close to official LineageOS, you can take a look at the changes in the screenshots section.
Click to expand...
Click to collapse
Installation instructions:
Files you need:
TWRP 3.0.0 by eagleeyetom
TWRP 3.2.1.-0 by ShubhamB
ZUI 2.5.358ST firmware
latest version of our ROM (always on top of the linked list)
(optional) OpenGApps ARM 7.1 (recommended version is Aroma)
You can switch from official LineageOS to our ROM by flashing this small zip, which removes the signature check and then our ROM. Do not flash GApps again, this is only possible on a freshly installed ROM! If you want to go back to official, you need to flash this file.
Steps to install:
unlock bootloader
flash TWRP 3.0.0 using fastboot (v3.0.0 is currently the only version with Aroma support, which we need later on)
if you get this error message, you can ignore it: E: unknown command [log] - this happens because the old TWRP version you need to use doesn't support certain logging commands used in updater scripts, this does not affect the integrity of your installation
flash ZUI 2.5.358ST (this flashes the latest available official firmware)
wipe system, cache, data and Dalvik cache
flash our ROM
(optional) flash OpenGApps, you can use Aroma installer (the interface is bugged, but usable and the phone doesn't crash thanks to the TWRP we are using)
flash updated TWRP 3.2.1-0 (has more features and is more up-to-date, Aroma isn't supported, but you don't need that anymore now)
Click to expand...
Click to collapse
Changelog:
see first post below
Click to expand...
Click to collapse
Downloads:
Download the latest version of our ROM here (always on top of the linked list).
Click to expand...
Click to collapse
Sources:
https://github.com/DaBozzz
Click to expand...
Click to collapse
Bug reports:
Please do not report non-functional fingerprint sensors. You need to flash the ZUI firmware before, as it includes the updated fingerprint sensor drivers. Take a look at the instructions above please.
Feel free to report any other bugs!
Click to expand...
Click to collapse
Thanks to:
LineageOS team, for maintaining our beloved OS
ashwin007, for maintaining our device (in the past?)
OrdenKrieger, for being the reason why this device is still alive
MrColdbird, for investigating all the big issues
Click to expand...
Click to collapse
If you want to support the most important developer for the Z 1, consider donating to OrdenKrieger, his PayPal donation mail address is [email protected].
XDA:DevDB Information
Unofficial LineageOS 14.1, ROM for the Lenovo Zuk Z1
Contributors
Da Bozz, Fusionalex
Source Code: https://github.com/DaBozzz
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: ZUI 2.5.358ST firmware
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 20171126
Beta Release Date: 2017-11-26
Created 2017-11-22
Last Updated 2017-12-23
Announcements
Changelog:
All builds contain the latest LineageOS changes.
Code:
20171126: some UI changes, Ambient display
[LIST]
[*][changed] settings icon updated, to apply this change you have to delete the icon database of your launcher: navigate to [I]/data/data/[Launcher Bundle-ID/Package Name]/databases/[/I], delete [I]app_icons.db[/I] and restart your launcher
[*][changed] updater accent color updated to match recent changes
[*][new] Ambient Display
[*][new] Toast message icons
[/LIST]
20171123: some UI changes
[LIST]
[*][changed] blue accent color
[*][changed] documents icon updated, to apply this change you have to delete the icon database of your launcher: navigate to [I]/data/data/[Launcher Bundle-ID/Package Name]/databases/[/I] and delete [I]app_icons.db[/I] and restart your launcher
[/LIST]
20171122: initial release
[LIST]
[*][new] U-Touch
[*][fixed] headset buttons and headset hook working, especially with Xiaomi headsets
[*][new] GLONASS enabled
[*][changed] custom OTA updates
[*][changed] rounded icons
[*][new] apn: added support for spusu MVNO (Austria)
[/LIST]
Click to expand...
Click to collapse
Nice work guys.. keep it up.. hope to see a bug free ROM from you..
Little advice :
Try to make radio images inline with device tree so that users don't need to flash a big chunk os before flashing this zip just only for latest radio images ...
shubhambhise said:
Nice work guys.. keep it up.. hope to see a bug free ROM from you..
Little advice :
Try to make radio images inline with device tree so that users don't need to flash a big chunk os before flashing this zip just only for latest radio images ...
Click to expand...
Click to collapse
Yeah, you're right. I created a flashable ZIP containing only the firmware, now about 33 MBs in size.
Feels like device rose like a Phoenix from the ashes of hell... Thank you for the rom
Amazing , thanks
Sent from my Pixel XL using XDA Labs
Please bring Camera2 API
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)????
But please, please implement it, the chipset SD801 does supports it?
And please add Ambient Display Feature...
Please reply sir...
Vaibhav Puri said:
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)
But please, please implement it, the chipset SD801 does supports it
And please add Ambient Display Feature...
Please reply sir...
Click to expand...
Click to collapse
Its impossible mate... Try and understand... In your listing of msm8974 devices, does any device has HAL3 enabled ?
AFAIK the answer is no... Our chipset is too old to implement it
Vaibhav Puri said:
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)
But please, please implement it, the chipset SD801 does supports it
And please add Ambient Display Feature...
Please reply sir...
Click to expand...
Click to collapse
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Great work from you guys, looking forward to future builds!
Can you upload screenshots..??
himanshu fulmali said:
Can you upload screenshots..??
Click to expand...
Click to collapse
Why? It's just LineageOS but with rounded icons like you've seen them on pixel devices.
himanshu fulmali said:
Can you upload screenshots..??
Click to expand...
Click to collapse
As soon as the UI updates are included in the build we will upload screenshots, but it's really just the same like on LineageOS.
Fusionalex said:
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Click to expand...
Click to collapse
U can take help from @shubhambhise , in his AEX, ambient display works super fine.
Sharma_Ji said:
U can take help from @shubhambhise , in his AEX, ambient display works super fine.
Click to expand...
Click to collapse
Thanks, we will take a look at it! Some devs talked about a possible negative performance impact, which is why the feature hasn't been included yet.
Great job.
Can i use Magisk and Substartum.
Fusionalex said:
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Click to expand...
Click to collapse
Thanks for your reply sir,
And I'm very happy to have great developers like you, who proved to be the best, I've just downloaded the 24th November build, and it's great that finally lineage os has ambient display enabled....
All the credit goes to you (@Fusionalex), @Da Bozz & @OrdenKrieger...
Sir, I would still have the request to test Camera2 API on this phone
You people are our last hope, because editing the Device Tree is beyond my reach, as it requires great dedication, knowledge and ambition, that I don't possess...
Sir, besides Cam2, I have one last request for you, please add three finger screenshot gesture and toast icons to your upcoming builds...
Please sir...
Waiting for your reply...
hardikkchavda said:
Can i use Magisk and Substartum.
Click to expand...
Click to collapse
Hello! Yes, you can use Magisk of course!
I don't know about Substratum sorry, it isn't included in the rom.
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Vaibhav Puri said:
Thanks for your reply sir,
And I'm very happy to have great developers like you, who proved to be the best, I've just downloaded the 24th November build, and it's great that finally lineage os has ambient display enabled....
All the credit goes to you (@Fusionalex), @Da Bozz & @OrdenKrieger...
Sir, I would still have the request to test Camera2 API on this phone
You people are our last hope, because editing the Device Tree is beyond my reach, as it requires great dedication, knowledge and ambition, that I don't possess...
Sir, besides Cam2, I have one last request for you, please add three finger screenshot gesture and toast icons to your upcoming builds...
Please sir...
Waiting for your reply...
Click to expand...
Click to collapse
Thanks! I'm glad you like our work!
The ambient display build from 24th has been taken down for now, because the implementation is incomplete, it's missing some settings which we will add later today.
Camera2 API is still work in progress sorry!
About the other 2 things: please describe more precisely what you want and we will consider it
Thanks for your valuable reply sir,
I was requesting for a popular gesture nowadays called the 3 Finger Swipe Screenshot
In this one, a user has to swipe from the top to the bottom dragging 3 fingers on the screen, this works as a gesture and takes a screenshot, it is very popular in Xiaomi devices (MIUI) and on OnePlus devices....
And now, many custom ROMs like Resurrection Remix, PureNexus, etc. have this feature
Attached picture 1 & 2 show a demo...
-----------------------------------------------------------------------
Second of all is the app icon that will appear on the toast message...
CM12.1 & CM13 stable versions have this feature which works flawlessly, attached picture 3 & 4 demonstrate how...
But in the nougat ROMs, users are provided with a switch to either enable it or to disable it...
But this "switch" has proved to be buggy in every nougat ROM that I have used (picture 5)
To implement this, one has to add this code to Toast.java file in the framework:
(android_frameworks_base/core/java/android/widget/Toast.java)
Code:
ImageView appIcon = (ImageView) mView.findViewById(android.R.id.icon);
if (appIcon != null) {
ActivityManager am =
(ActivityManager) context.getSystemService(Context.ACTIVITY_SERVICE);
if (!am.isPackageInForeground(packageName)) {
PackageManager pm = context.getPackageManager();
Drawable icon = null;
try {
icon = pm.getApplicationIcon(packageName);
} catch (PackageManager.NameNotFoundException e) {
// nothing to do
}
appIcon.setImageDrawable(icon);
}
}
I ported out this code from RR OS source code, but please consider investigating as I'm not sure if this will work on lineage os...
Link- https://github.com/ResurrectionRemi...ob/nougat/core/java/android/widget/Toast.java
Link to Lineage 14.1 toast.java :
https://github.com/LineageOS/androi...b/cm-14.1/core/java/android/widget/Toast.java
Link to CM13 toast.java :
https://github.com/CyanogenMod/andr...3.0-ZNH5Y/core/java/android/widget/Toast.java
Please have a look at this, whenever you get time.....
I will patiently wait...
Hi all,
I'm proud to announce SailfishOS for the OnePlus 6!
I think it's great to support alternatives to Android and help bring some competition back to the mobile OS space.
I really appreciate any contributions, bug reports or suggestions on GitHub
Discord
Join the discord here: https://discord.gg/haVG9Ga
Code:
#include "disclaimer.h"
/*
* I am NOT responsible for you getting fired because the alarm app failed or if you destroy your device.
* Please do some research if you have any concerns about features included in this port.
* Same security standards as for official Sailfish OS devices may not apply here.
* Everything is served on an as-is basis and YOU are choosing to do these modifications.
*/
If you aren't comfortable formatting, flashing and modding your device, please don't install this ROM
What works?
* Display
* Touch
* LED
* Audio
* NFC
* Bluetooth
* Phone calls
* Texts
* Mobile Data
* WiFi
* GPS
* Camera
* Sensors
* RTC alarms
* USB data and charging
What Doesn't work?
* Fingerprint reader - currently unavailable on unofficial sailfishOS ports
* Battery optimisations - I will be moving to an updated kernel and applying some manual tweaks (possibly from the brilliant custom kernels already here).
* OTAs - I'm currently working on getting OTA updates working, when they are you will be able to get new updates without having to flash a new image!
FAQ
PLEASE read the FAQ before asking questions, I won't respond to questions about features I've mentioned there.
Screenshots
On imgur
Flashing
Please follow the guide here
Mer Wiki
Here for up to date details on what works/doesn't and links to useful pages.
Downloads and Changelog
Latest bleeding edge release and changelog
Latest stable release
* NOTE: Latest stable release does have poor battery life.
Sources
android_kernel_oneplus_sdm845: android kernel sources
Guides, FAQ and Releases
The mer wiki page for OnePlus 6
Thanks to
@deathmist for all of his advice and help
DeltoidDelta for his contributions
@Mister_Magister, mal, r0kk3rz and everyone else at #sailfishos-porters
Without them this port would not be possible.
XDA:DevDB Information
Sailfish OS Enchilada, ROM for the OnePlus 6
Contributors
kalube01
Source Code: https://github.com/sailfish-oneplus6/sf-enchilada/releases
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: Lineage OS
Version Information
Status: Beta
Current Stable Version: 1.1.0
Stable Release Date: 2020-04-19
Created 2020-01-30
Last Updated 2020-04-26
Requesting 6T testers
6T build is out!
https://github.com/sailfish-oneplus6/sf-enchilada/releases
Thanks! great work, i will probably try and flash it one of these days.
Ubuntu touch, postmarket os and sailfish are really high up my wanted list.
Plumbumber said:
Thanks! great work, i will probably try and flash it one of these days.
Ubuntu touch, postmarket os and sailfish are really high up my wanted list.
Click to expand...
Click to collapse
Good to hear, word on the street is there's some work getting PostmarketOS booting on the OnePlus 5, once I get a more stable release out - and ideally OnePlus 6t support, I might follow suit!
Unfortunately I don't think we'll get UBPorts any time soon, they currently only supported android 7 base and this phone shipped with Oreo
Sailfish OS Is very good on op6. I tried the previous release but unfortunately battery drain was very much annoing and It bring my brain crazy. I have got only this device and so I can't test every build cause i Need phone.
When the release Will be a Daily driver build, I am getting It on my device.
Great work. U are the best
Can't wait for stable!
Sent from my ONEPLUS A6003 using Tapatalk
omg，i love it，thx your work。非常感谢
Ho to you all. What about 1.0 version? How Is the battery Life? How Is the third parts program installation?
sgroimax said:
Ho to you all. What about 1.0 version? How Is the battery Life? How Is the third parts program installation?
Click to expand...
Click to collapse
Battery life is drastically improved, hence the 1.0.0 version tag. I'm not sure what you mean about "third party program installation", you can install storeman and get applications from openrepos if you choose but that's about it.
kalube01 said:
Battery life is drastically improved, hence the 1.0.0 version tag. I'm not sure what you mean about "third party program installation", you can install storeman and get applications from openrepos if you choose but that's about it.
Click to expand...
Click to collapse
Drastically imrpoved means? One, two, ten ours.
sgroimax said:
Drastically imrpoved means? One, two, ten ours.
Click to expand...
Click to collapse
I haven't been able to test extensively, with the screen off it's about 4 times better
kalube01 said:
I haven't been able to test extensively, with the screen off it's about 4 times better
Click to expand...
Click to collapse
Wow. 4 times Better means that battery drains in about 3/4 ours. It Is too bad again!
Thanks for your effort and i Hope u Will be able to solve every issue. You are the best man.
Dear kalube, are u developing about battery life or android apps compatibility to use over the build? I ask u this because I am proud to read yout post and test your work. Unfortunately i Need whatsapp. Only this app. After that i could be your official tester. I have got only this device with only One SIM card, so I cannot test your work without whatsapp. I Need It for work group and Red cross group.
I'm on 10.3.2.3 can I install this time?
refai said:
I'm on 10.3.2.3 can I install this time?
Click to expand...
Click to collapse
In the first post OP have written that u must run android 9.
So, u can't install SFOS over android 10
Can this be used as a daily driver? Wanna give this a try
nero125 said:
Can this be used as a daily driver? Wanna give this a try
Click to expand...
Click to collapse
Yes it is. There is no anbox. So no WhatsApp. For the rest it works like a charm
Thanks for SFOS, using it nicely.
Not pressuring you, but is there another update planned soon? Thanks!
ddaggebi said:
Thanks for SFOS, using it nicely.
Not pressuring you, but is there another update planned soon? Thanks!
Click to expand...
Click to collapse
Glad it's working well for you! I'm mostly focusing on postmarketOS now, Sailfish becomes harder and harder to build with each update and is super hard to get reproducible builds with so it's really hard to justify working on it which is such a shame because the UI is brilliant.
kalube01 said:
Glad it's working well for you! I'm mostly focusing on postmarketOS now, Sailfish becomes harder and harder to build with each update and is super hard to get reproducible builds with so it's really hard to justify working on it which is such a shame because the UI is brilliant.
Click to expand...
Click to collapse
Wow fast reply?? Thanks for the kind explain.
Such a shame? I've used SFOS ports since it was 1.0 alpha(in Nexus 4), I hoped that by now the building environment would be much better... Seems like it's reversed.
Well, gonna use what's already on since it works well.
PostmarketOS looks great too! Real mobile linux sounds fun! I hope what you do goes well??