Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Introduction:
A friend of mine (Fusionalex) and me were very unsatisfied with the current state of custom ROM development for this - at least concerning the hardware - great device. The maintainer of the official LineageOS has done nothing for months. Fixes for basic issues and features (see our features below) haven't been implemented although the source has been available for years now. For us, switching to one of the numerous bloated Lineage forks (which at least fixed some issues, but brought other unnecessary problems) was no reasonable option. Apart from all the bloat, many of them don't get regular updates anymore, even though major security issues like KRACK or Blueborne have already been fixed in the official Lineage source. There are some great builds out there like CM 13.0 by MrColdbird or 14.1 by OrdenKrieger (from which we took most of the code for the major fixes, a big thank you goes out to you).
So which ROM did we choose? An up-to-date official LineageOS, but extremely bugged? Or a fixed, but incredibly bloated and mostly unstable custom ROM without the latest security patches? We chose to create our own Lineage experience, as close to the official as possible, but with most of the big issues fixed and up to date.
We will continue to update this ROM until LineageOS 15 by OrdenKrieger is stable enough to use as daily drivers.
Click to expand...
Click to collapse
Features:
U-Touch
Headset buttons and headset hook working, especially with Xiaomi headsets
Ambient Display
GLONASS
OTA updates
some customizations to update the user interface, because apparently Google refuses to push its new design in the AOSP source
We are investigating/working on the some more things, just follow our changelog below!
Click to expand...
Click to collapse
Screenshots:
The UI is close to official LineageOS, you can take a look at the changes in the screenshots section.
Click to expand...
Click to collapse
Installation instructions:
Files you need:
TWRP 3.0.0 by eagleeyetom
TWRP 3.2.1.-0 by ShubhamB
ZUI 2.5.358ST firmware
latest version of our ROM (always on top of the linked list)
(optional) OpenGApps ARM 7.1 (recommended version is Aroma)
You can switch from official LineageOS to our ROM by flashing this small zip, which removes the signature check and then our ROM. Do not flash GApps again, this is only possible on a freshly installed ROM! If you want to go back to official, you need to flash this file.
Steps to install:
unlock bootloader
flash TWRP 3.0.0 using fastboot (v3.0.0 is currently the only version with Aroma support, which we need later on)
if you get this error message, you can ignore it: E: unknown command [log] - this happens because the old TWRP version you need to use doesn't support certain logging commands used in updater scripts, this does not affect the integrity of your installation
flash ZUI 2.5.358ST (this flashes the latest available official firmware)
wipe system, cache, data and Dalvik cache
flash our ROM
(optional) flash OpenGApps, you can use Aroma installer (the interface is bugged, but usable and the phone doesn't crash thanks to the TWRP we are using)
flash updated TWRP 3.2.1-0 (has more features and is more up-to-date, Aroma isn't supported, but you don't need that anymore now)
Click to expand...
Click to collapse
Changelog:
see first post below
Click to expand...
Click to collapse
Downloads:
Download the latest version of our ROM here (always on top of the linked list).
Click to expand...
Click to collapse
Sources:
https://github.com/DaBozzz
Click to expand...
Click to collapse
Bug reports:
Please do not report non-functional fingerprint sensors. You need to flash the ZUI firmware before, as it includes the updated fingerprint sensor drivers. Take a look at the instructions above please.
Feel free to report any other bugs!
Click to expand...
Click to collapse
Thanks to:
LineageOS team, for maintaining our beloved OS
ashwin007, for maintaining our device (in the past?)
OrdenKrieger, for being the reason why this device is still alive
MrColdbird, for investigating all the big issues
Click to expand...
Click to collapse
If you want to support the most important developer for the Z 1, consider donating to OrdenKrieger, his PayPal donation mail address is [email protected].
XDA:DevDB Information
Unofficial LineageOS 14.1, ROM for the Lenovo Zuk Z1
Contributors
Da Bozz, Fusionalex
Source Code: https://github.com/DaBozzz
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: ZUI 2.5.358ST firmware
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 20171126
Beta Release Date: 2017-11-26
Created 2017-11-22
Last Updated 2017-12-23
Announcements
Changelog:
All builds contain the latest LineageOS changes.
Code:
20171126: some UI changes, Ambient display
[LIST]
[*][changed] settings icon updated, to apply this change you have to delete the icon database of your launcher: navigate to [I]/data/data/[Launcher Bundle-ID/Package Name]/databases/[/I], delete [I]app_icons.db[/I] and restart your launcher
[*][changed] updater accent color updated to match recent changes
[*][new] Ambient Display
[*][new] Toast message icons
[/LIST]
20171123: some UI changes
[LIST]
[*][changed] blue accent color
[*][changed] documents icon updated, to apply this change you have to delete the icon database of your launcher: navigate to [I]/data/data/[Launcher Bundle-ID/Package Name]/databases/[/I] and delete [I]app_icons.db[/I] and restart your launcher
[/LIST]
20171122: initial release
[LIST]
[*][new] U-Touch
[*][fixed] headset buttons and headset hook working, especially with Xiaomi headsets
[*][new] GLONASS enabled
[*][changed] custom OTA updates
[*][changed] rounded icons
[*][new] apn: added support for spusu MVNO (Austria)
[/LIST]
Click to expand...
Click to collapse
Nice work guys.. keep it up.. hope to see a bug free ROM from you..
Little advice :
Try to make radio images inline with device tree so that users don't need to flash a big chunk os before flashing this zip just only for latest radio images ...
shubhambhise said:
Nice work guys.. keep it up.. hope to see a bug free ROM from you..
Little advice :
Try to make radio images inline with device tree so that users don't need to flash a big chunk os before flashing this zip just only for latest radio images ...
Click to expand...
Click to collapse
Yeah, you're right. I created a flashable ZIP containing only the firmware, now about 33 MBs in size.
Feels like device rose like a Phoenix from the ashes of hell... Thank you for the rom
Amazing , thanks
Sent from my Pixel XL using XDA Labs
Please bring Camera2 API
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)????
But please, please implement it, the chipset SD801 does supports it?
And please add Ambient Display Feature...
Please reply sir...
Vaibhav Puri said:
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)
But please, please implement it, the chipset SD801 does supports it
And please add Ambient Display Feature...
Please reply sir...
Click to expand...
Click to collapse
Its impossible mate... Try and understand... In your listing of msm8974 devices, does any device has HAL3 enabled ?
AFAIK the answer is no... Our chipset is too old to implement it
Vaibhav Puri said:
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)
But please, please implement it, the chipset SD801 does supports it
And please add Ambient Display Feature...
Please reply sir...
Click to expand...
Click to collapse
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Great work from you guys, looking forward to future builds!
Can you upload screenshots..??
himanshu fulmali said:
Can you upload screenshots..??
Click to expand...
Click to collapse
Why? It's just LineageOS but with rounded icons like you've seen them on pixel devices.
himanshu fulmali said:
Can you upload screenshots..??
Click to expand...
Click to collapse
As soon as the UI updates are included in the build we will upload screenshots, but it's really just the same like on LineageOS.
Fusionalex said:
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Click to expand...
Click to collapse
U can take help from @shubhambhise , in his AEX, ambient display works super fine.
Sharma_Ji said:
U can take help from @shubhambhise , in his AEX, ambient display works super fine.
Click to expand...
Click to collapse
Thanks, we will take a look at it! Some devs talked about a possible negative performance impact, which is why the feature hasn't been included yet.
Great job.
Can i use Magisk and Substartum.
Fusionalex said:
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Click to expand...
Click to collapse
Thanks for your reply sir,
And I'm very happy to have great developers like you, who proved to be the best, I've just downloaded the 24th November build, and it's great that finally lineage os has ambient display enabled....
All the credit goes to you (@Fusionalex), @Da Bozz & @OrdenKrieger...
Sir, I would still have the request to test Camera2 API on this phone
You people are our last hope, because editing the Device Tree is beyond my reach, as it requires great dedication, knowledge and ambition, that I don't possess...
Sir, besides Cam2, I have one last request for you, please add three finger screenshot gesture and toast icons to your upcoming builds...
Please sir...
Waiting for your reply...
hardikkchavda said:
Can i use Magisk and Substartum.
Click to expand...
Click to collapse
Hello! Yes, you can use Magisk of course!
I don't know about Substratum sorry, it isn't included in the rom.
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Vaibhav Puri said:
Thanks for your reply sir,
And I'm very happy to have great developers like you, who proved to be the best, I've just downloaded the 24th November build, and it's great that finally lineage os has ambient display enabled....
All the credit goes to you (@Fusionalex), @Da Bozz & @OrdenKrieger...
Sir, I would still have the request to test Camera2 API on this phone
You people are our last hope, because editing the Device Tree is beyond my reach, as it requires great dedication, knowledge and ambition, that I don't possess...
Sir, besides Cam2, I have one last request for you, please add three finger screenshot gesture and toast icons to your upcoming builds...
Please sir...
Waiting for your reply...
Click to expand...
Click to collapse
Thanks! I'm glad you like our work!
The ambient display build from 24th has been taken down for now, because the implementation is incomplete, it's missing some settings which we will add later today.
Camera2 API is still work in progress sorry!
About the other 2 things: please describe more precisely what you want and we will consider it
Thanks for your valuable reply sir,
I was requesting for a popular gesture nowadays called the 3 Finger Swipe Screenshot
In this one, a user has to swipe from the top to the bottom dragging 3 fingers on the screen, this works as a gesture and takes a screenshot, it is very popular in Xiaomi devices (MIUI) and on OnePlus devices....
And now, many custom ROMs like Resurrection Remix, PureNexus, etc. have this feature
Attached picture 1 & 2 show a demo...
-----------------------------------------------------------------------
Second of all is the app icon that will appear on the toast message...
CM12.1 & CM13 stable versions have this feature which works flawlessly, attached picture 3 & 4 demonstrate how...
But in the nougat ROMs, users are provided with a switch to either enable it or to disable it...
But this "switch" has proved to be buggy in every nougat ROM that I have used (picture 5)
To implement this, one has to add this code to Toast.java file in the framework:
(android_frameworks_base/core/java/android/widget/Toast.java)
Code:
ImageView appIcon = (ImageView) mView.findViewById(android.R.id.icon);
if (appIcon != null) {
ActivityManager am =
(ActivityManager) context.getSystemService(Context.ACTIVITY_SERVICE);
if (!am.isPackageInForeground(packageName)) {
PackageManager pm = context.getPackageManager();
Drawable icon = null;
try {
icon = pm.getApplicationIcon(packageName);
} catch (PackageManager.NameNotFoundException e) {
// nothing to do
}
appIcon.setImageDrawable(icon);
}
}
I ported out this code from RR OS source code, but please consider investigating as I'm not sure if this will work on lineage os...
Link- https://github.com/ResurrectionRemi...ob/nougat/core/java/android/widget/Toast.java
Link to Lineage 14.1 toast.java :
https://github.com/LineageOS/androi...b/cm-14.1/core/java/android/widget/Toast.java
Link to CM13 toast.java :
https://github.com/CyanogenMod/andr...3.0-ZNH5Y/core/java/android/widget/Toast.java
Please have a look at this, whenever you get time.....
I will patiently wait...
Related
Disclaimer
Code:
#include <disclaimer.h>
/*
* This is for unlocked bootloaders only, If you haven't unlocked it yet
* be aware that it does void your warranty.
*
* I am not responsible for bricked devices, dead SD cards,
* or you getting fired because the alarm app failed.
* Keep in mid that this is an extremely unstable build and I don't recommend
* it for newcomers who have never flashed ROMs before
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This Project has been made obsolete by Alx31TLse's Dirty unicorn port. I'll decide whether I will morph this into something new or completely abandon it
Introduction
This is ROM is built from Omni sources, but I cherry-picked (added manually) HALO from paranoid sources. This is my first ROM that I've every built so don't expect it to work perfectly.
Please read the FAQ and Known Issues sections before complaining about anything. DO NOT ask for ETAs (I will smite you if you do)
Click to expand...
Click to collapse
Screenshots
Coming soon (probably today or tomorrow)
Click to expand...
Click to collapse
Features
All Omni Features
Paranoid Android HALO
Lockscreen Notifications
Omni Multiwindow
You choose the next one
Click to expand...
Click to collapse
Download
Second Post
Click to expand...
Click to collapse
Installation Instructions
Reboot into recovery (DUH!)
Wipe EVERYTHING (Data, System, Cache)
Flash HalOmni
Flash Gapps (optional, but recommended)
Flash SuperSU (without this you wont have root)
Reboot and enjoy
Click to expand...
Click to collapse
Changelog
HalOmni-20140614:
Code:
- Fixed Lockscreen Notifications
- build type is user (odexed ROM, thanks walter79)
HalOmni-20140613:
Code:
- Added Lockscreen Notifications
- Added Omni Multiwindow (very WIP, use at own risk)
- Walter79's kernel from his GitHub (see sources below)
HalOmni-20140607:
Code:
- Initial Build
- Added HALO
Click to expand...
Click to collapse
Known Issues
Active Display causes SystemUI FC. DO NOT activate it or you will have to wipe data
Halo disappears from the screen completely when hidden (There is an option to disable that, but not in this build. Working on it)
Halo is a bit buggy when rotating the screen. Just disable and enable it from the notification drawer.
Multiwindow is still quite buggy, but that's not my fault. Blame team Omni for not finishing it
Click to expand...
Click to collapse
FAQ Section
Will be filled over time.
Click to expand...
Click to collapse
Sources
OmniROM GitHub
Paranoid Sources
Jabza's GitHub - HALO commits
Omni Gerrit
Walter79's Kernel
Proprietary files for Sony devices
Click to expand...
Click to collapse
Thanks to:
- @walter79 for his kernel and ROM. Without you this wouldn't have been possible
- Paranoid Team for their fantastic HALO
- FXP without whom we wouldn't have any custom ROMs
- @jabza for his guide on cherry-picking
Click to expand...
Click to collapse
XDA:DevDB Information
HalOmni, ROM for the Sony Xperia V
Contributors
paxy97, walter79, Omni Team, Paranoid Team, FXP
Source Code: https://github.com/omnirom
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: OmniROM
Version Information
Status: Testing
Created 2014-06-07
Last Updated 2015-01-26
Download
HalOmni-20140614:
Uploading again since it failed -.- .....
Click to expand...
Click to collapse
Older Releases:
HalOmni-20140613:
AFH-20140613
Click to expand...
Click to collapse
HalOmni-20140607:
AFH-20140607
Mega-20140607 Use only if AFH is unavailable
Click to expand...
Click to collapse
Add-ons
Gapps-20140105 By the CyanogenMod team
SuperSU By Chainfire
Click to expand...
Click to collapse
very good man...thanks!think u can implement theme engine?
sash89 said:
very good man...thanks!think u can implement theme engine?
Click to expand...
Click to collapse
It's the first thing on my to-do list My brother is asking me like every 10 minutes if I can add the theme engine
Ahahahah....bad for u man!but he is damn right!is the only best thing that is missing in this rom...
Sent from my Xperia V using Tapatalk
Maybe this can help you
https://plus.google.com/app/basic/stream/z12wife45nagynaxm04cfbdi4pfxifgolgs
PA introducing theme engine: " We tried to do it in a way so that it can be easily ported to other AOSP based ROMs for the benefit of the entire community."
rob rich said:
Maybe this can help you
https://plus.google.com/app/basic/stream/z12wife45nagynaxm04cfbdi4pfxifgolgs
PA introducing theme engine: " We tried to do it in a way so that it can be easily ported to other AOSP based ROMs for the benefit of the entire community."
Click to expand...
Click to collapse
Ok I found the commits that add the theme engine, but there are 8 of them so it will take some time. Starting either tonight or tomorrow
In the meantime you guys can try this:
http://forum.xda-developers.com/showthread.php?t=2504371
Congrats on your great work @paxy97
Just want to check how's the battery life on your home-version. I'm using walter79's and very happy with stability and battery.
You mention also in the bugs section that Active Display crashes?? I'm having no issues at the moment, and I really like this feature.
Any clue why it doesn't work on yours? If this is the case, not sure if I should change or maybe wait a bit.
Also, how is it with the Bluetooth issue? Still ongoing?
Anyway, I thank you for the hard work and the effort you are putting into this... keep it up.
:good:
alexbo said:
Congrats on your great work @paxy97
Just want to check how's the battery life on your home-version. I'm using walter79's and very happy with stability and battery.
You mention also in the bugs section that Active Display crashes?? I'm having no issues at the moment, and I really like this feature.
Any clue why it doesn't work on yours? If this is the case, not sure if I should change or maybe wait a bit.
Also, how is it with the Bluetooth issue? Still ongoing?
Anyway, I thank you for the hard work and the effort you are putting into this... keep it up.
:good:
Click to expand...
Click to collapse
Hm strange, when I flashed this ROM and enabled active display systemUI started crashing and I could do anything except boot to recovery and wipe data :/. Also while I was fixing some issues in the code I noticed that a lot of them came from active display conflicts.
I don't know about bluetooth, but I assume it's still bugged since my build is pretty much omni from source. I haven't changed anything regarding bluetooth.
I will ... until july 22nd, because I'm going on vacation for 3 weeks
For old cm themes. there are 9 commits: https://gerrit.omnirom.org/#/c/2790/ #mGerrit
https://gerrit.omnirom.org/#/q/status:abandoned,n,z
I'm sorry to say that I probably will not be able to make a CM version, because CM code is too different from Paranoid and I get too many errors that can only be solved by rewriting most of the statusbar and notificationService code (which I have neither the time, not the knowlege for). Sorry again, going back to dirty unicorn porting
Don't sweat over it, I assure you your efforts are highly appreciated.
Thank you for your work and please, keep it up!
Sent from my Xperia V using Tapatalk
vrl13 said:
Don't sweat over it, I assure you your efforts are highly appreciated.
Thank you for your work and please, keep it up!
Sent from my Xperia V using Tapatalk
Click to expand...
Click to collapse
I am , my pc has been running 48h straight downloading and building. Now I downloading dirty unicorn sources again, because I messed up the last ones. Hopefully I'll at least get that to build. Should not be too difficult though. It's based on pure omni, so I'll just add our device tree from omni's github and use walter personal github for the kernel, which is amazing btw . So hopefully in about 15h you'll have a build if it runs without any errors
New build coming coming soon (today or tomorrow, depends if it builds and uploads before I go to sleep).
Features:
- walter's personal kernel sources (the ones he uses for homemade builds)
- Omni's multiwindow (it's EXTREMELY unstable. It's still under review on gerrit)
- Omni changes so far
* Theme manager is still giving me a lot of errors so sadly no build with it yet
Click to expand...
Click to collapse
How is the Chance to add this?
https://gerrit.omnirom.org/#/c/5734/
https://gerrit.omnirom.org/#/c/6062/
rob rich said:
How is the Chance to add this?
https://gerrit.omnirom.org/#/c/5734/
https://gerrit.omnirom.org/#/c/6062/
Click to expand...
Click to collapse
OH GOD. Thank you so very much. I was looking for this . Stopping build and adding this. No chance that build is coming out today, but expect it tomorrow morning
paxy97 said:
OH GOD. Thank you so very much. I was looking for this . Stopping build and adding this. No chance that build is coming out today, but expect it tomorrow morning
Click to expand...
Click to collapse
I see we understand each other
The feature i want most
rob rich said:
I see we understand each other
The feature i want most
Click to expand...
Click to collapse
Yeah, it's much better than active display. Not buggy and doesn't consume as much battery.
Damn it. I just got up, looked at my PC and realised that it failed to build because I'm out of HDD space -.-. I had 30gb free didn't expect it to use that much. Anyway uploading the build when I come home from school
New build 20140613. Check changelog for changes
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.
Downloads
CyanogenMod
Latest Release 11-23-2016
cm-13.0-20161123-UNOFFICIAL-ailsa_ii.zip
OpenGapps (use an ARM64, 6.0 zip) - now on tap needs mini or higher.
Source
Device tree
Kernel Source
Proprietary vendor
XDA:DevDB Information
CyanogenMod 13, ROM for the ZTE Axon 7
Contributors
Unjustified Dev, DrakenFX
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Beta Release Date: 2016-11-23
Created 2016-09-08
Last Updated 2016-11-23
Reserved
Status
Working
Audio (Minor distortion with playback and mic)
Camera
Double tap to wake
Fingerprint Sensor
GPS (Not using QC location)
NFC
Radio
Sensors
Wifi/Bt
Not Working
Changelog
20161123
Added doze options kanged from oneplus3 (Ambient display)
Use akm speaker path (fixes major audio distortion)
20161122
Added 32bit sensors from ZTE (fixes camera)
Enabled UI blur
Enabled Factory reset protection
Lowered minimum brightness
Enabled doze
Add carrier settings (global and cdma)
Re-enable clang build
Switched to opensource audio
20161017
Add keydisabler (switch between virtual and software keys)
Add audio amplifier (start the amplifier)
Fix NFC (Updated config and firmware)
20161009
Fixed fingerprint sensor
Initial Beta Release
20160908
Initial test release
Reserved
This is awesome, can't wait to help out with this!
xxBrun0xx said:
This is awesome, can't wait to help out with this!
Click to expand...
Click to collapse
It's ready to download and test. For anyone asking for directions, I will not provide them yet as it's for testing and debugging only.
Do we have a way to get back to stock after flashing this?
xxBrun0xx said:
Do we have a way to get back to stock after flashing this?
Click to expand...
Click to collapse
You backup your stock rom before installing !
xxBrun0xx said:
Do we have a way to get back to stock after flashing this?
Click to expand...
Click to collapse
Make sure to Back Up all things!
http://forum.xda-developers.com/showpost.php?p=68587621&postcount=98
xxBrun0xx said:
Do we have a way to get back to stock after flashing this?
Click to expand...
Click to collapse
And for your safety ,I'll recommend you to wait full a more stable/full functional release if you don't know how to do what you ask.
P.S. not been rude here ,just trying to save you a hassle/lot of headaches/etc/etc
DrakenFX said:
And for your safety ,I'll recommend you to wait full a more stable/full functional release if you don't know how to do what you ask.
P.S. not been rude here ,just trying to save you a hassle/lot of headaches/etc/etc
Click to expand...
Click to collapse
Factory images are my go to, but I know we don't have any so figured I'd ask.
Awesome, just flashed it on my device. Let me know if there's any way we can help !
Pollito788 said:
Awesome, just flashed it on my device. Let me know if there's any way we can help !
Click to expand...
Click to collapse
Provide a logcat
Could you test things like radio,nfc,fingerprint etc basically things I list as non working
Hey Unjustified, good to see you over on the Axon 7 side! You got the development started for the Idol 3, so it'll be great to see what you can start for the Axon 7 as well! Awesome work! :good:
A question to the devs or anyone knowledgeable. Is it just a time thing, before the not working stuff is figured out? Or is there a legitimate chance that stuff just won't work because we are missing stuff from ZTEs side?
Sent from my Nexus 4 using Tapatalk
I don't know how to said these but I'm gonna try [emoji16]
Is ain't better or easier to work whit the stock rom an give it some tweaks and debloat it ... a would think it won't be so bad on battery or more stable I'm probly wrong can some one xplain me
Sent from my SM-N900A using XDA-Developers mobile app
There seems to be a topic in ZTE that we will see another OTA update tomorrow. Can people with unlocked bootloaders from ZTE will be able to install the OTA update?
Well, that does it, I'm going on Amazon
Sent from my ASUS_Z008 using XDA-Developers mobile app
justamar24 said:
There seems to be a topic in ZTE that we will see another OTA update tomorrow. Can people with unlocked bootloaders from ZTE will be able to install the OTA update?
Click to expand...
Click to collapse
This question is not pertinent to this topic (this topic is about CM, not official OTAs), but we don't know, we'll have to wait and see.
tupirujp said:
I don't know how to said these but I'm gonna try [emoji16]
Is ain't better or easier to work whit the stock rom an give it some tweaks and debloat it ... a would think it won't be so bad on battery or more stable I'm probly wrong can some one xplain me
Sent from my SM-N900A using XDA-Developers mobile app
Click to expand...
Click to collapse
ZTE hasn't released the full ROM image yet......so nobody can work with the stock ROM yet. Hopefully soon......Until then, CM is different and not "stock" ZTE, they take what they have and adapt to make it work on different devices.
I am not responsible for bricked devices, dead sdcards, explosions, nuclear wars, alarm applications getting failed or any kind of damage to your device, please read the first two posts carefully before deciding to flash this rom, any questions which are already answered in the first and second posts will be ignored.
What is this ?
This is my custom LineageOS based rom which I initially made just for personal use, some users requested me to share it, so I did that. This is a minimal rom with only those features that I use and I really don't like to add too much. If you have some requests then sure, post them but don't keep high expectations that it will be added, I am always reading your posts but will add only those features which I like or which seem very necessary. There are no useless optimisations here, these builds are compiled with stock toolchains.
Does it get updates ?
Usually I update this once in a week, sometimes I could update it in 4 days and sometimes in 8 days, there is no fixed update period but since this is my daily driver and I don't like to use outdated stuff, so this rom will be updated whenever necessary. There is no inbuilt updater app, If you use it, you have to download full builds from here only.
Short feature list -
Full oms support, install substratum from play store and use themes
Network meter in statusbar is available with hide arrows option
Options to customize quicksetting tiles rows and columns
Volte icon is available, can be toggled if you don't like it
Wakelock blocker is available in customization menu
Option to turn on/off fingerprint authentication vibration
Option to allow unlock at first boot with fingerprint
Killed some lockscreen animations, makes unlocking faster
Easy toggles for wifi, bluetooth, data are available
Built with inbuilt los root, removed the # icon permanently
Option to add screenrecord button in power menu
Option to disable screenshot shutter sound
Default gallery is old los gallery because I don't like new one
Cpu info overlay is available in development settings
Killed lots of logging and failed to acquire lock spam on touch
Kernel used is radon latest, always with balanced setting
Many new qs tiles like reboot, screenshot, hw keys toggle, sound
Some other info -
This rom is rooted by default, to unroot, just download official los unroot addon and flash it.
You cannot flash official los over it, verification will fail and it will not flash, better go for clean flash.
Both kenzo and kate users should use firmware from official los thread post #2.
Kernel Info -
This rom uses latest stable version of radon with following settings - balanced performance, quick charge off, selinux enforcing, new thermal engine, warm enhanced colors.
You can easily change these settings without rebooting with my Radon kernel control app or you can just re-flash radon kernel to change these settings in installer itself.
Downloads and changelogs -
https://github.com/los-kenzo/downloads/blob/lk-7.1/README.md
Credits and contributors -
@TheStrix, @abhishek987, @billchen1977 for all their work on device.
@MOVZX for suggesting some stuff for this.
NOS and OctOS teams, I used some of their features.
Everyone whose commits you see on github.
XDA:DevDB Information
Customized LineageOS based builds, ROM for the Xiaomi Redmi Note 3
Source Code: https://github.com/los-kenzo
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.10.108
Based On: LineageOS
Version Information
Status: Stable
Created 2017-05-27
Last Updated 2017-11-26
Screenshots
Reserved for screenshots
Thank you!
Thank you very much..
I am using it and its really good.
Great work. Love them, was publicizing them since more than a month.
Please Can you add signature spoofing? If you could, your rom would fits perfectly with me.
Reserved for review
Coming
Reserved for review
Does it have button remap like on DU?
exodius48 said:
Does it have button remap like on DU?
Click to expand...
Click to collapse
It has same button customization which los has.
I don't need root can I flash unroot zip from los
dnana_28 said:
I don't need root can I flash unroot zip from los
Click to expand...
Click to collapse
Yes
Umang96 said:
Yes
Click to expand...
Click to collapse
Hello,
Can I unroot and then reroot with Magisk ?
thx
phalae said:
Hello,
Can I unroot and then reroot with Magisk ?
thx
Click to expand...
Click to collapse
He has already answered that in the post above, please take time to read and understand. Yes you can unroot and reroot with Magisk.
Nice one
Sent from my Redmi Note 3 using Tapatalk
Ss about phone Dev !!
Sent from my Redmi Note 3 using XDA Labs
Hi, does this rom have customizes quick settings, buttons,navigation bars and recents app
If this rom doesn't have, do you have any plan to add these features in future. Tks in anvanced
Umang96 said:
It has same button customization which los has.
Click to expand...
Click to collapse
Its very minimal.
Could you pls add button remap like on DU?
jack_hunter97 said:
Hi, does this rom have customizes quick settings, buttons,navigation bars and recents app
If this rom doesn't have, do you have any plan to add these features in future. Tks in anvanced
Click to expand...
Click to collapse
+1
Sent from my Redmi Note 3 using Tapatalk
Can we dirty flash official lineage os updates over your build umang?
AOSP-CAF 8.1 for Xiaomi A1
Code:
/*
* Your warranty is now maybe void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
What's AOSP?
AOSP is Android as Google publish without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.
We added few non-AOSP features for a better user experience and we NOT going to add something other.
What's CodeAurora Forums?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.
Bugs
* WiFi hotspot (need to reboot after using it or wifi breaks)
FAQ
Why is the security patch older then the latest AOSP patch?
CAF focus on delivering the latest hardware patches and are usually about a month behind Google on security patches, on the other hand, Google is usually a month or more behind on them on caf patches (sometimes months). No point in complaining about it, if you want the latest security patch, go with an AOSP based rom (like PixelExperience), if you want latest qualcomm optimizations for our hardware as well as fixes, go with caf, its as simple as that.
I'm having an issue with X third party app/module/hack
Talk to the dev of that thing, not me. if the dev has a solution I need to implement that won't effect others, have him contact me
Can you add X feature like traffic meter?
No! this is pure aosp-caf. Only support for exfat and advanced power + button support was added, no stupid non stock UI tricks
Installation
Same as all other roms here:
1. Wipe data if coming from another custom rom
2. Install ROM
3. Flash TWRP
4. reboot into twrp
5. Flash GAPPS
6. Flash magisk
7. reboot
Download
Link
Sources
https://github.com/AOSP-CAF
https://github.com/PixelExperience-Devices/android_kernel_xiaomi_msm8953
Credits:
Men_in_black007 for the rom
Team oreo for the dt
Flex1911 for the kernel base
XDA:DevDB Information
[ROM][8.1][AOSP-CAF][LA.UM.6.6.r1-07400-89xx.0][17/04/18], ROM for the Xiaomi Mi A1
Contributors
sooti, Men_in_black007, flex1911
Source Code: https://github.com/AOSP-CAF
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: CAF
Version Information
Status: Stable
Created 2018-04-12
Last Updated 2018-04-17
Nice Dev!!
Changelog:
17/04/18:
* Partial fix for wifi hotspot - It works now but reboot is required after turning hotspot off to get wifi to work again, still trying to find a solution.
* Updated kernel base from flex to 3.18.105
* Fixed camera watermark in stock camera (for those who use it)
14/04/18:
* Fixed audio clicking bug
* Merged 'LA.UM.6.6.r1-07400-89xx.0'
13/04/18:
* Initial release
Reserved
link for download?
yay!!! was waiting for it :3 thanks!!!
Selinux permissive? Some banking apps don't run if it's set as permissive. It'd be really helpful if it's enforcing
pluticoman said:
link for download?
Click to expand...
Click to collapse
Will be up when its done uploading
anoubhavcashyap said:
Selinux permissive? Some banking apps don't run if it's set as permissive. It'd be really helpful if it's enforcing
Click to expand...
Click to collapse
Non of the roms have selinux enforced yet, we are working on addressing the denials but for now just use magisk hide no? I think its should work, at least it works for me... otherwise can't help until we get selinux working right
Thanks @sooti.
A long awaited ROM. Thanks a lot.
That's what called master piece. Great work .... Thank you for pure core Android
sooti said:
Will be up when its done uploading
Non of the roms have selinux enforced yet, we are working on addressing the denials but for now just use magisk hide no? I think its should work, at least it works for me... otherwise can't help until we get selinux working right
Click to expand...
Click to collapse
Yeah, man but unfortunately there's some apps that are still detecting root even after using magisk hide.
Build is up.
Possible bug - voLTE, there is no icon so don't complain about that. Please check if voLTE actually works, not if icon is there. thanks
Already installed all good sooti thanks!!!
In this rom the navbar is working??
ruperxl89 said:
In this rom the navbar is working??
Click to expand...
Click to collapse
Yup
Small update will be uploaded tomorrow that fixes audio issues (click sound)
sooti said:
Yup
Small update will be uploaded tomorrow that fixes audio issues (click sound)
Click to expand...
Click to collapse
and where you can configure to override the buttons and activate the navbar
ruperxl89 said:
and where you can configure to override the buttons and activate the navbar
Click to expand...
Click to collapse
Under buttons :/ just enable navbar
sooti said:
Yup
Small update will be uploaded tomorrow that fixes audio issues (click sound)
Click to expand...
Click to collapse
hey. noob question.
In order to install the update I need to do the same process I did in the installation? Or will it be via OTA?
leofwg said:
hey. noob question.
In order to install the update I need to do the same process I did in the installation? Or will it be via OTA?
Click to expand...
Click to collapse
Same process as install
Official?
Code:
/*
* Your warranty is now maybe void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
About Project
Reloaded-CAF is a Custom ROM which is based on CAF. The main aim of this ROM is to bring stock AOSP experience as much as possible while maintaining performance, smoothness and good battery backup. I hope that you'll all love this project, and help us, shape it even more better. Meanwhile, all of our sources are publicly available on our Github. Hope you enjoy your stay and like our work on Reloaded-CAF. We did added some features to improve the overall experience.
What's CAF?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP + Qualcomm specific enhancements and optimization.
Features:
Boost Framework
Network Traffic Monitor
Battery Styles
Statusbar Clock Date Customization
System wide dark mode
Accent colors options
Auto Face unlock (Settings -> security -> lock screen preference)
QS row/column settings
Volume key music control
Advanced Reboot menu
In-call vibration options
Double tap to sleep from status bar and lockscreen
Ability to hide the clock
Ability to hide the navigation bar
Ability to invert the navbar
Ability to toggle screenshot shutter sound
Pin quick unlock
Battery and notification light settings
Double tap/long press to toggle torch
Added QS Tiles for power, screenshot, sync, headsup, caffeine
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte.
IR camera
Known issues:
Selinux Enforce
Instructions :
Download the latest build and GApps
Reboot to recovery and wipe system, data, cache, dalvik
Flash Rom zip
Flash the latest build and Gapps
Flash magisk, if you want root access (optional)
Reboot
Downloads :
Reloaded-CAF Latest Build [15-03-2018]: https://sourceforge.net/projects/mu.../Reloaded-CAF-9.0-20190315-rolex.zip/download
Gapps [arm64/9.0]: https://opengapps.org/
Telegram Groups:
Reloaded Telegram Group
FAQ
Why is the security patch older then the latest AOSP patch?
CAF focus on delivering the latest hardware patches and are usually about a month behind Google on security patches, on the other hand, Google is usually a month or more behind on them on caf patches (sometimes months). No point in complaining about it, if you want the latest security patch, go with an AOSP based rom (like LineageOS), if you want latest qualcomm optimizations for our hardware as well as fixes, go with caf, its as simple as that.
Kernel Source: https://github.com/muralivijay/android_kernel_xiaomi_msm8917.git
ROM-Source Code: https://github.com/Reloaded-CAF/
Special Thanks To
riteshsaxena For the pure CAF source.
XDA:DevDB Information
RELOADED-CAF, ROM for the Xiaomi Redmi 4a
Contributors
muralivijay, haran2003
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Miui Global Stable
Based On: CAF
Version Information
Status: Alpha
Beta Release Date: 2019-03-15
Created 2019-03-15
Last Updated 2019-10-26
Good job man, thank you.
I already know that's Alpha version, i just wanna report the only one bug that i've founded, when you change clock position it appears twice only on home screen, thanks anyway for the hard job.
_conors_ said:
Good job man, thank you.
I already know that's Alpha version, i just wanna report the only one bug that i've founded, when you change clock position it appears twice only on home screen, thanks anyway for the hard job.
Click to expand...
Click to collapse
Weird issue. I don't get this type of bug . Here proof my above screenshot see.
Try this to fix this
1) change launcher
2) go settings- > time & data -> turn off toogle to clock showing
3) go settings -> system ui_tuner- > show clock turn off it
It will disable any two clocks showing on status bar.. Hope this guide will help
Nice bro trying it :good:
muralivijay said:
Weird issue. I don't get this type of bug . Here proof my above screenshot see.
Try this to fix this
1) change launcher
2) go settings- > time & data -> turn off toogle to clock showing
3) go settings -> system ui_tuner- > show clock turn off it
It will disable any two clocks showing on status bar.. Hope this guide will help
Click to expand...
Click to collapse
sorry dev ... but don't you want to develop AOSPA for this device? I see you have 1 AOSPA ROM file at https://sourceforge.net/.
this aospa is an amazing rom. so I beg you to develop it.
thank you and sorry if I'm not polite
AOSPA already maintained by arpon .so ask him
muralivijay said:
AOSPA already maintained by arpon .so ask him
Click to expand...
Click to collapse
really? if indeed there is maintenance, I can't wait for him to share it here. thank you for the news!
Red_Zmooth said:
really? if indeed there is maintenance, I can't wait for him to share it here. thank you for the news!
Click to expand...
Click to collapse
check other forums. Or our telegram channel. For AOSPA rom download links
muralivijay said:
check other forums. Or our telegram channel. For AOSPA rom download links
Click to expand...
Click to collapse
which forum? I don't use telegram
New Update pushed 19/03/2019
Changelog
* Fixed clock showing twice in status bar
* Added option switch LTE to 4G icon
* Added option to pocket lock
* device tree & vendor huge update with some major bug fixes . special thanks @Harangovindan for his contribution with me
WARNING: if you updating this rom with dirty /data. i recommend you to do make backup of your apps data then do clean install . because we updated new mounts for pie backword compatiblity support. so thats makes bootloop if did dirty update . so make sure do clean install this update
hey guys our device tree and vendor tree is now private. due kangers and someone buildbots earn money using our source. iam many times warned them don,t do this . but some retards stil doing that. and disrespect our work always . there is no any financial help or server etc from any maintainers who using my source code always . but only few users always help with me. once again i thank you guys . who always with me and understand my situation. so i will give updates who loves stil loves our base . but not frequently. only per month. if any critical bugs founded i will push update faster as possible. so don,t expect device tree and vendor changelogs . but we updating . so don,t worry about it. hope you understand this
Regards
-MURALIDHARAN
Red_Zmooth said:
which forum? I don't use telegram
Click to expand...
Click to collapse
https://t.me/redmi4aINT/911112
muralivijay said:
https://t.me/redmi4aINT/911112
Click to expand...
Click to collapse
Thank you very much:fingers-crossed:
muralivijay said:
New Update pushed 19/03/2019
Changelog
* Fixed clock showing twice in status bar
* Added option switch LTE to 4G icon
* Added option to pocket lock
* device tree & vendor huge update with some major bug fixes . special thanks @Harangovindan for his contribution with me
WARNING: if you updating this rom with dirty /data. i recommend you to do make backup of your apps data then do clean install . because we updated new mounts for pie backword compatiblity support. so thats makes bootloop if did dirty update . so make sure do clean install this update
hey guys our device tree and vendor tree is now private. due kangers and someone buildbots earn money using our source. iam many times warned them don,t do this . but some retards stil doing that. and disrespect our work always . there is no any financial help or server etc from any maintainers who using my source code always . but only few users always help with me. once again i thank you guys . who always with me and understand my situation. so i will give updates who loves stil loves our base . but not frequently. only per month. if any critical bugs founded i will push update faster as possible. so don,t expect device tree and vendor changelogs . but we updating . so don,t worry about it. hope you understand this
Regards
-MURALIDHARAN
Click to expand...
Click to collapse
Officially ?
DevilUsr said:
Officially ?
Click to expand...
Click to collapse
Its unofficial build. Official will be soon
muralivijay said:
Its unofficial build. Official will be soon
Click to expand...
Click to collapse
I can't flash use orange fox recovery
can you give me something recommended
Error verified treble in recovery unknown zip format
DevilUsr said:
I can't flash use orange fox recovery
can you give me something recommended
Error verified treble in recovery unknown zip format
Click to expand...
Click to collapse
Remove compatibility.zip inside of rom zip . Or use use official twrp
Good news now our rom support officially
muralivijay said:
Good news now our rom support officially
Click to expand...
Click to collapse
:highfive: :victory: very good news!
btw
I tried installing Gcam but always forced close. I tried several versions but same. Does this ROM support Gcam? if yes what version works? thank you
Update: GCAM workig,but need GAPPS installed
Dear, a consultation in the multimedia reproduction the videos suffer loss in their quality, as in many other roms? sorry for my English
muralivijay said:
hey guys our device tree and vendor tree is now private. due kangers and someone buildbots earn money using our source. iam many times warned them don,t do this . but some retards stil doing that. and disrespect our work always . there is no any financial help or server etc from any maintainers who using my source code always . but only few users always help with me. once again i thank you guys . who always with me and understand my situation. so i will give updates who loves stil loves our base . but not frequently. only per month. if any critical bugs founded i will push update faster as possible. so don,t expect device tree and vendor changelogs . but we updating . so don,t worry about it. hope you understand this
Regards
-MURALIDHARAN
Click to expand...
Click to collapse
I understand, these guys don't respect the developers, taking advantage of the work of others, especially to make money.
One thing is true, in the past I used your tree to compile roms, but I used it only for personal use, I never share anything through the things of others without permission.
I respect the developers and their work.
Keep it up with your great work