Let me explain firstly... I was in 5.1 and flashed a bad zip with TWRP, and i get a failed message in the screen... I thought nothing wrong would happened and restart phone... The point is i got infinite bootloop (phone stuck in first animation, vibration and then restart, and all again till the phone exhauste the battery)...
The situation is my volume button is broken and cant enter to fastboot mode. When i plug the phone in my computer, is recognize for few seconds till gets restart again. The question, is there any option to get in fastboot mode using linux or something like that? It would be great. :crying:
Had this same issue this weekend. Had a xt1060 dev ed with down volume broke. You need to replace the buttons on the frame (seen on eBay for 5$-13$). I ended up throwing the main board into another phone I had laying around rather than replace the buttons alone. EBay is your friend. I tried shorting pins on the connection where the button
ribbon cable plugs into, but without an actual pin out, I only managed to get the power button to work.
But is a way to give life back to my motorola? When i plug to charger it turn on and vibrate and restart..... and over again, till it loses all the battery
kathsfernan said:
But is a way to give life back to my motorola? When i plug to charger it turn on and vibrate and restart..... and over again, till it loses all the battery
Click to expand...
Click to collapse
like i said, there is but it involves replacing the ribbon cable underneath the buttons, that is glued to the metal frame. it will cost between 5-15$ to buy the parts, and its pretty simple.
---------- Post added at 08:34 PM ---------- Previous post was at 08:34 PM ----------
Dadud said:
like i said, there is but it involves replacing the ribbon cable underneath the buttons, that is glued to the metal frame. it will cost between 5-15$ to buy the parts, and its pretty simple.
Click to expand...
Click to collapse
https://www.amazon.com/Ribbon-Connector-Motorola-XT1060-XT1058/dp/B00K191UX6
Dadud said:
like i said, there is but it involves replacing the ribbon cable underneath the buttons, that is glued to the metal frame. it will cost between 5-15$ to buy the parts, and its pretty simple.
---------- Post added at 08:34 PM ---------- Previous post was at 08:34 PM ----------
https://www.amazon.com/Ribbon-Connector-Motorola-XT1060-XT1058/dp/B00K191UX6
Click to expand...
Click to collapse
Right ... once ill fix the ribbon cable do i need a factory cable to charge up the battery ? cuz once i plug the telephone to outlet it begins to restart.... or should i connect to pc and enter fastboot and proceed to flash the firmware without charge
Related
Hello people
I already have a new phone.
But my oldphone the optimus black the power button dont work sometimes it works if i put different charger in my phone :/
Idunno what this is caused by.
And if there is no solution could i use the g button like powerbutton.
My ob is stock 4.0.4 and rooted.
Thank you
the power button, speaker and usb port are all located on the same connector
I saw this when I opened mine and it wasnt charging, power button didnt work and the earphone speaker wouldnt work sometimes as well.
the connection comes lose over time, what I did was to add a thin piece of foam ontop of the connector to keep it in place
its been working fine for a few days now
I got the info from another thread, will look for the link
---------- Post added at 03:44 PM ---------- Previous post was at 03:36 PM ----------
Heres the link
http://forum.xda-developers.com/showthread.php?t=1589983
kaassaus said:
And if there is no solution could i use the g button like powerbutton.
My ob is stock 4.0.4 and rooted.
Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2302337&highlight=button+remapping
My brother has a milestone 3 xt860, and yesterday he came to me, and said that his phone stopped working, this is what happens when you try to start it up:
https://www.youtube.com/watch?v=Xt9UVdqlqbQ
I tried going into recovery mode by pressing X button + power button, but happens exactly the same thing as in this video...
I also tried plugging it on the by USB into my PC, it was off when I plugged, the screen turned on the same way, the brightness changed 2 times, and it's stuck this way, my PC don't recognize anything, tried plugging and unplugging it while turned on, nothing happens...
I never saw anything like this, does anyone knows what could cause this, and is there a way to fix?
Most likely a bad flex cable, can be replaced, kind of a pain though.
Can find a new one on ebay, should be a link to take apart instuctions in my list. sd_shadow's [Collection] of Links for: Droid 3 (XT862)
Sent from my XT862 using Tapatalk
---------- Post added at 08:10 PM ---------- Previous post was at 08:06 PM ----------
Some times you can find a sweet spot, and get the screen to work.
By sliding keyboard open, and powering on, but depends on how bad the cable is.
Sent from my XT862 using Tapatalk
Thanks, it seems to be the cable indeed...
sadly I don't have any of the tools needed to take apart >_< but thanks anyway
Motorola Droid 3 Screen Repair Take Apart Repair Guide
.
Motorola Droid 3 XT860 Main LCD Slide Front Camera Earpiece Speaker Flex Cable
.
a cell phone pry tool set (need t3, t5 and pry tool)
Hello, I got this phone bricked after a flashing atempt with some ****ty battery. Got a new one, but the phone won't turn on at all, won't charge, nor white led indicator while pluged in the charger. The led does turn on when I plug the cellphone on the pc holding the power button, and the pc tries to recognize the device, on a loop of "device connected/disconnected" sounds done by windows. I made a factory cable, but I don't know if I have to install any drivers on the pc in order for it to work. Any thoughts?
@sd_shadow
Markfard said:
Hello, I got this phone bricked after a flashing atempt with some ****ty battery. Got a new one, but the phone won't turn on at all, won't charge, nor white led indicator while pluged in the charger. The led does turn on when I plug the cellphone on the pc holding the power button, and the pc tries to recognize the device, on a loop of "device connected/disconnected" sounds done by windows. I made a factory cable, but I don't know if I have to install any drivers on the pc in order for it to work. Any thoughts?
@sd_shadow
Click to expand...
Click to collapse
are you seeing anything on the phone's screen?
sd_shadow said:
are you seeing anything on the phone's screen?
Click to expand...
Click to collapse
Not at all. The phone is basically dead, except for when I plug it into the pc, ad it tries to recognize it, without sucess.
Markfard said:
Not at all. The phone is basically dead, except for when I plug it into the pc, ad it tries to recognize it, without sucess.
Click to expand...
Click to collapse
If there is nothing on the screen, likely a bad flex cable or LCD.
Sent from my XT907 using Tapatalk
---------- Post added at 09:52 PM ---------- Previous post was at 09:39 PM ----------
the PC connect/disconnect is likely a bootloop.
could try flashing, but it must be in AP fastboot mode
easiest way to get to AP fastboot mode, power off device, hold volume down, press power for 5-6 sec, release power, then release volume down.
---------- Post added at 09:53 PM ---------- Previous post was at 09:52 PM ----------
For drivers and driver issues see
Motorola USB Drivers, RSD Lite, Firmware...
It was in a moment of anger no judging please
1) The screen is obviously destroyed and wont even turn on.
2) My computer doesnt recognize the phone.
3) If its plugged the phone blinks its notification light for like 5 minutes
4) if its unplugged it blinks only when I hold the power button. It also blinks once when I unplug it.
5) I dissamble the motherboard and it doesnt seem to be harmed.
The question is, do you think the phone is dead or should I replace the screen, all repair shops ask me the PIN number to give me a diagnostic, which is reasonable but I dont want to give on my privacy to fix a phone.
Thoughts?
Thanks a lot for reading!
have u tried to boot with power+vol up or power+vol down while connected to PC?
xdxita said:
have u tried to boot with power+vol up or power+vol down while connected to PC?
Click to expand...
Click to collapse
Yes! but nothing happens same blinking light
More thoughts ?
juliankid said:
More thoughts ?
Click to expand...
Click to collapse
I hope your parents don't buy you a new one and that you learn what it costs to earn money.
Let's be honest, we all want to throw our a2 against the wall with xiaomi's updates.
chiel78 said:
Let's be honest, we all want to throw our a2 against the wall with xiaomi's updates.
Click to expand...
Click to collapse
And wait till Android 10 update. I'm sure it will be buggy af
---------- Post added at 10:35 AM ---------- Previous post was at 09:57 AM ----------
juliankid said:
It was in a moment of anger no judging please
1) The screen is obviously destroyed and wont even turn on.
2) My computer doesnt recognize the phone.
3) If its plugged the phone blinks its notification light for like 5 minutes
4) if its unplugged it blinks only when I hold the power button. It also blinks once when I unplug it.
5) I dissamble the motherboard and it doesnt seem to be harmed.
The question is, do you think the phone is dead or should I replace the screen, all repair shops ask me the PIN number to give me a diagnostic, which is reasonable but I dont want to give on my privacy to fix a phone.
Thoughts?
Thanks a lot for reading!
Click to expand...
Click to collapse
Check the battery flex. Maybe is unplugged. If you don't want to give the pin you should try to change the screen by yourself.
jlmcr87 said:
I hope your parents don't buy you a new one and that you learn what it costs to earn money.
Click to expand...
Click to collapse
I waste my own money, thanks for the answer
jordiop said:
And wait till Android 10 update. I'm sure it will be buggy af
---------- Post added at 10:35 AM ---------- Previous post was at 09:57 AM ----------
Check the battery flex. Maybe is unplugged. If you don't want to give the pin you should try to change the screen by yourself.
Click to expand...
Click to collapse
The battery flex is plugged, I tried unplugging it and plugging it in several times and nothing happend, yes I have no problem in changing the screen myself but I I think I have to fix something else before
Why you try to connect to PC? For saving your files?
Maybe u need to change screen first and then if there is any problem you will see it. İ think your problem should be in type c port
Maharram said:
Why you try to connect to PC? For saving your files?
Maybe u need to change screen first and then if there is any problem you will see it. İ think your problem should be in type c port
Click to expand...
Click to collapse
Fortunately I have backuped the files before breaking it
I tried to connected to make sure its really working, okay that wouldn't be so expensive to fix
juliankid said:
I waste my own money, thanks for the answer
The battery flex is plugged, I tried unplugging it and plugging it in several times and nothing happend, yes I have no problem in changing the screen myself but I I think I have to fix something else before
Click to expand...
Click to collapse
So, change the screen. If something else is broken, then you will see it.
juliankid said:
It was in a moment of anger no judging please
1) The screen is obviously destroyed and wont even turn on.
2) My computer doesnt recognize the phone.
3) If its plugged the phone blinks its notification light for like 5 minutes
4) if its unplugged it blinks only when I hold the power button. It also blinks once when I unplug it.
5) I dissamble the motherboard and it doesnt seem to be harmed.
The question is, do you think the phone is dead or should I replace the screen, all repair shops ask me the PIN number to give me a diagnostic, which is reasonable but I dont want to give on my privacy to fix a phone.
Thoughts?
Thanks a lot for reading!
Click to expand...
Click to collapse
Well if its only the screen then i would assume pcwould noticed it when its powered on. (Assuming drivers and so on are installed...my 2cnts buy another phone
RIP A2 :crying:
It's completely unresponsive no LED lights no screen power button does nothing plugging it into charging cord does nothing laying it on a wireless charger does nothing just my extra phone I had laying around I was f****** around and was editing some of the partitions and binary ninja and I think I completely sucked it up. Does anyone know a good place to start maybe I can try and fix this
Hell yeah sound advice so far.. I agree, but I was only messing that deep cause I got 4 v40's. If interested in advice pm me
Are you sure you didn't inadvertently end up in 9008 loader mode, as described in the post to unlock your bootloader?
https://forum.xda-developers.com/lg-v40/how-to/unlock-lg-v40-via-9008-root-t-mobile-t4042207
It's easy to end up there when you wanted to end up in LAF stock recovery (download mode). The screen will go completely blank and the only thing that will bring it out is holding power + vol down for 5-10 seconds.
No its not I'm sure.. I've done everything, every button combo and let it sit for days.. It won't even respond to charging cable.. Any ideas
Redacted Kaos said:
Hell yeah sound advice so far.. I agree, but I was only messing that deep cause I got 4 v40's. If interested in advice pm me
Click to expand...
Click to collapse
4 V40's what carrier i'm looking for a verizon one .-. in case your looking to part with one of them
Ainz_Ooal_Gown said:
4 V40's what carrier i'm looking for a verizon one .-. in case your looking to part with one of them
Click to expand...
Click to collapse
Sprint... I'd part with it no problem
Bump
Redacted Kaos said:
It's completely unresponsive no LED lights no screen power button does nothing plugging it into charging cord does nothing laying it on a wireless charger does nothing just my extra phone I had laying around I was f****** around and was editing some of the partitions and binary ninja and I think I completely sucked it up. Does anyone know a good place to start maybe I can try and fix this
Click to expand...
Click to collapse
if you can take apart your phone, you could try shorting the EDL pins on the back of the mainboard and insert USB cable to check if you get the HS/QD Loader detected on your PC. You may try reflashing partitions if you succeed.
I just sent it to asurion.. They had it back in 2 days and they are covered under sprint insurance