Related
I updated from ATT firmware to Rogers V20C.
I don't like the update since it doesn't support Spanish, that I need to use for my wife.
Also, I wasn't able to make the FM radio work.
I want to go back to ATT original firmware
I tried 'Recovery Phone' in the LGMobile Support tool, but it tells me that this model can't be updated.
How can I go back to the original firmware?
https://rapidshare.com/#!download|2...391931|R~8193971AC5B3613D32ECF33EA9EC4787|0|0
Fallow that link to dl bin for thrill then flash using bin flash lgflashtool
thrillin
Link for how to in general section o3d forum or in our dev section you pick where to look and enjoy
thrillin
link to lgflashtool download?
could you pls?
Go to o3d forum general section then look its the first post its a sticky
thrillin
adixtra said:
IN ENGLISH
Read the update at the bottom
(18 SEPTEMBER 2011)
NOTE !!!!!
Before installation, uninstall all LG's programs and drivers from your computer.
Tested on Windows XP.
Download all these files.
http://csmg.lgmobile.com:9002/data/Setup_LGFlashTool_1.1.zip
https://rapidshare.com/files/2393374474/file.zip
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/AVIVML/20110623_05/OMAPFlashInstaller-4.10(2).zip
http://csmg.lgmobile.com:9002/data/LGUnitedModemDriver_WHQL_ML_Ver_4.9.7_All_Win7_LGEAll.zip
LGFLASHTool 1.2 http://forum.xda-developers.com/showpost.php?p=19094799&postcount=107
Thread with Optimus 3d Roms in *.bin format. http://forum.xda-developers.com/showthread.php?t=1246678Thanks to nasirahmed
1.Extract "Setup_LGFlashTool_1.1.zip" and Install.
2.Extract "file.zip" and put "LGFlashTool.exe" to location where you installed "Setup_LGFlashTool_1.1.zip" (default: C:\LG\LGFlashTool\)
3.Extract and Install "OMAPFlashInstaller-4.10(2).zip"
4.Exract "LGUnitedModemDriver_WHQL_ML_Ver_4.9.7_All_Win7_LGEAll.zip" and Install "LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe " and "LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe "
5.Turn Off phone, Remove your phone's SIM and SD cards.
6.Press and hold voll up button in phone.
7.When u holding "voll up button" connect the USB cable.
8.When computer detects the new hardware (Omap4430) release "voll up button".
9.Driver Installation:
a.
b.
c.
d.
e.
f.
g.
10.After Driver installation, go to device manager and change the port "LGE CDMA USB SERIAL PORT" to "com41".
a.
b.As I wrote above, you must change the port for "LGE CDMA USB SERIAL PORT" not for "LGE Mobile USB serial port" as pictured.
c.
d.
11.Run LGFlashTool.
12.In DLL select file for p920 or p920h ( from here http://forum.xda-developers.com/showthread.php?t=1246678"
13.In S/W select only *.bin file from downloaded rom.
14. Choice (Check) "USB" and click OK.
15. Click on Port COM settings(COM plug icon)
16.Check as on photos.
a.
b.
17. Click start(The Port 1 window should appear READY).
18. Disconnects USB cable and wait 5 seconds.
19. Press and hold voll up button in phone and connect USB cable.
20. The update process will begin automatically after that release the "vol up".
21.When the progress bar reaches 100%, Power ON the phone.
WARNING!!!
If the update process has stopped for a longer time (about 5 minutes) not disconnect the phone from USB, , press and hold Vol Up + Power and wait when update process resume.
You do this on your own risk!
Jeśli widzicie błędy, piszcie.
UPDATE 18 SEPTEMBER 2011
To flashing rom with LGFLASHTOOL without errors you need right USB cable.
Between 4 and 5 pin you have to solder resistor 910 Kohm.
The update process is the same ,but u don't need press any button when connect USB cable to phone.
Phone screen during update
This fix update screen isue
After flashing the phone will restart.
Update screen appears again(don't disconnect usb cable from phone and don't close LGDLASHTOOL)
Please wait until you see the info about error of OTA update.
After that the phone rebots and power On automaticaly.
Thanx to Marti701
Click to expand...
Click to collapse
thrillin
thrillin
There ya go enjoy
thrillin
Yesterday i went with a friend of mine to a Sprint store here at Puerto Rico and bought two Galaxy S4 devices.
And so my journey began...... ( :silly: 3:45am May 11 2013 Location Services: MacBook Pro - Las Marias, PR)
Here are the instructions for rooting your Galaxy S4 from sprint :
Instructions for rooting your S4
Written By PuNksTerHD
Instructions
1.If on Windows download Samsung Kies from Samsung’s Website.
2.On the device go to Settings -> More -> About device. Scroll down to where Build number is and click it 5 times to enable the Developers menu.
3.Go to the developers menu and enable usb debugging.
4.Extract the Galaxy S4 you just downloaded and plug the usb connector and run the run.bat ( on Linux and Mac you must run it from terminal with run.sh)
5.Let the phone restart and go to the PlayStore and download SuperSu.
6.Your Done Rooting.
7.Go to the PlayStore and download EasyTether Lite.
8.On your PC or Mac Install the drivers provided with the files you downloaded.
ENJOY
Hotspot mod with twrp install
AFTER ROOTING WITH THE ABOVE INSTRUCTIONS:
Download It : Link removed to pirating software
1. Put your S4 in Download Mode ( Power OFF and press Power + Volume Down + Home Buton )
2. Open Odin and check that the COM Port is yellow and click the PDA buton
3. Choose the TWRP recovery file
4. Click Start and let the Phone restart
5. Turn Off The Phone and hold Volume Up + Home
6. TEAMWIN RECOVERY will boot up and choose install and install the MDCHotspotMod-Odexed.zip
7. Let the phone boot up and BOOM CHAKALAKA!!!!
ENJOY YOUR WIFI TETHERED DEVICE!!!
no credits to the source of the exploit/root. and you included pirating software..
Links to pirating software removed ...thread closed
I really appreciate any help,
I tried to root my phone, followed the steps here:
http://forum.xda-developers.com/show...45863425638526
I got to step 7., where I wanted to open the app , but all I got was: Unfortunately SystemBackupTest has stopped. How can I fix it ? Knowing that none of lg optimus 4x users faced this problem on most of the internet forums.
A screenshot is attached
the page you included in post is not found!!!
anyways man download this file and follow steps to root!! SAFE i guess u dont need to backup!!
1. Download and install the necessary First you need USB driver for your PC or Laptop to connect your phone. So, grab the LG USB driver and install it on PC.
2.Turn the phone off, press the “volume down” and “power” key to boot, do not release the volume down key until the screen appears with a red triangle robot.
3 Insert the USB connected to the computer, use the “volume” down select “Apply update from ADB, press the power button to determine two lines of yellow text prompts.
4 Double-click ROOT.BAT (PC)
5. Wait until the installation is complete, the phone to return to the menu cursor restart items, press the power button to restart the phone.
6. A Superuser icon appears on the phone, running “information page, click here to check for updates, connect to the network, mandatory update
hope that helps ,,, View attachment 2078934
vieri_202 said:
the page you included in post is not found!!!
anyways man download this file and follow steps to root!! SAFE i guess u dont need to backup!!
1. Download and install the necessary First you need USB driver for your PC or Laptop to connect your phone. So, grab the LG USB driver and install it on PC.
2.Turn the phone off, press the “volume down” and “power” key to boot, do not release the volume down key until the screen appears with a red triangle robot.
3 Insert the USB connected to the computer, use the “volume” down select “Apply update from ADB, press the power button to determine two lines of yellow text prompts.
4 Double-click ROOT.BAT (PC)
5. Wait until the installation is complete, the phone to return to the menu cursor restart items, press the power button to restart the phone.
6. A Superuser icon appears on the phone, running “information page, click here to check for updates, connect to the network, mandatory update
hope that helps ,,, View attachment 2078934
Click to expand...
Click to collapse
The link is :
http://forum.xda-developers.com/showthread.php?t=1818502&nocache=1&z=3345863425638526
nevermind it's ok
vieri_202 said:
the page you included in post is not found!!!
anyways man download this file and follow steps to root!! SAFE i guess u dont need to backup!!
1. Download and install the necessary First you need USB driver for your PC or Laptop to connect your phone. So, grab the LG USB driver and install it on PC.
2.Turn the phone off, press the “volume down” and “power” key to boot, do not release the volume down key until the screen appears with a red triangle robot.
3 Insert the USB connected to the computer, use the “volume” down select “Apply update from ADB, press the power button to determine two lines of yellow text prompts.
4 Double-click ROOT.BAT (PC)
5. Wait until the installation is complete, the phone to return to the menu cursor restart items, press the power button to restart the phone.
6. A Superuser icon appears on the phone, running “information page, click here to check for updates, connect to the network, mandatory update
hope that helps ,,, View attachment 2078934
Click to expand...
Click to collapse
Thanks alot !! :good: :good: :good: I really really appreciate it !! I searched so much on the web before I posted and none was helpful, you should make a post explaining this method and giving it a good tag so it go on the top google search*
I really thankful
Hello everyone,
If someone needed I am putting this link to not lost himself in the deep of google forests.
Ruu tested and makes you return to stock. (Tested by myself).
Link : http://dl3.htc.com/application/RUU_A11_UL_K44_DESIRE_SENSE60_AIO_Aio_Wireless_US_1.11.506.8.exe
Performing the ROM Update:
1. Download and save the HTC Desire™ ROM update to your PC.
2. Connect your device to your PC via the supplied USB cable.
3. If the device is not recognized by the PC, ensure you have HTC Sync Manager installed and then disconnect and reconnect the device from the USB cable.
4. Once the device is properly recognized on the PC, locate the HTC Desire 510 ROM Update that you downloaded. Double-click on the file to launch the system update wizard.
5. Follow all of the system update wizard instructions shown on your PC.
6. Once the update is complete, click Finish in the Wizard and the device will reboot.
7. Once the device reboots, the initial setup wizard will appear.
8. Once the initial setup process is complete, open Play Store, tap the Menu icon, then select My apps and ensure all installed apps are updated.
9. After initial setup and updating all apps, the device is ready for use.
Note : If the ROM update wizard fails to recognize the device, close the wizard and then follow the steps below:
· From a powered off state, hold VOLUME DOWN while powering on the device.
· Use the volume buttons to scroll to FASTBOOT and then press the POWER button to select it.
· Connect the device to the PC while in this state and attempt the ROM update again.
To exit FASTBOOT manually, use the volume keys to navigate to REBOOT and press the POWER button to select it.
Does this work with the VM version too? If not, can you post that RUU as well? Thanks.
rjmohit said:
Does this work with the VM version too? If not, can you post that RUU as well? Thanks.
Click to expand...
Click to collapse
Considering that you've made 283 posts on xda, don't you think a simple google search would have given you the VM RUU that you want? And no Crickets will not work. Sprint, Boost, Virgin Mobile RUU
benzersizadam said:
Hello everyone,
If someone needed I am putting this link to not lost himself in the deep of google forests.
Ruu tested and makes you return to stock. (Tested by myself).
Link : http://dl3.htc.com/application/RUU_A11_UL_K44_DESIRE_SENSE60_AIO_Aio_Wireless_US_1.11.506.8.exe
Performing the ROM Update:
1. Download and save the HTC Desire™ ROM update to your PC.
2. Connect your device to your PC via the supplied USB cable.
3. If the device is not recognized by the PC, ensure you have HTC Sync Manager installed and then disconnect and reconnect the device from the USB cable.
4. Once the device is properly recognized on the PC, locate the HTC Desire 510 ROM Update that you downloaded. Double-click on the file to launch the system update wizard.
5. Follow all of the system update wizard instructions shown on your PC.
6. Once the update is complete, click Finish in the Wizard and the device will reboot.
7. Once the device reboots, the initial setup wizard will appear.
8. Once the initial setup process is complete, open Play Store, tap the Menu icon, then select My apps and ensure all installed apps are updated.
9. After initial setup and updating all apps, the device is ready for use.
Note : If the ROM update wizard fails to recognize the device, close the wizard and then follow the steps below:
· From a powered off state, hold VOLUME DOWN while powering on the device.
· Use the volume buttons to scroll to FASTBOOT and then press the POWER button to select it.
· Connect the device to the PC while in this state and attempt the ROM update again.
To exit FASTBOOT manually, use the volume keys to navigate to REBOOT and press the POWER button to select it.
Click to expand...
Click to collapse
Link is not working bro...
i have new link, check, bro
Reboot Your Device Into Recovery Mode
There are multiple ways to reboot an Android device into recovery mode. But after the latest OneUI 3.0 update, Samsung does not allow booting into recovery without connecting your phone to a PC with a USB-C cable. Here's a solution to easily reboot to recovery.
The steps mentioned can be applied to boot into both the stock recovery as well as a custom recovery if you have one installed.
Reboot to recovery without root access and without connecting your phone to Laptop/Pc.
Download & Install LADB - Local ADB shell from playstore or download it directly from here.
Open Settings > About Phone and tap on the “Build number” field 7 times. This will enable “Developer Options.”
Go to Settings > System > Developer Options and enable “USB debugging” and “Wireless debugging.”
Open the LADB app. It will show a “Pairing information” dialog.
Open the recent apps screen. Press and hold on the app’s icon and tap “Split Screen” to open LADB in split-screen multitasking view.
On the bottom half, open Settings. Go to System > Developer Options > Wireless debugging. Tap on “Pair device with pairing code.” You’ll see a “Pair with device” dialog pop-up.
Copy the 6 digit “Wi-Fi pairing code” and paste it into the “pairing code” box in LADB. Copy the 5 digit port number from the IP address (the 5 numbers after the colon) and paste it into the “Port” box in LADB.
Hit “OKAY” in LADB and you should hopefully see text that says "Hello World”
Enter "reboot recovery"
And done now your phone will automatically reboot to recovery.
Note :
You can even try out different adb commands like deblooting system apps, allow permissions to apps like macdriod, system ui turner, etc and many more other adb commons without root and without a PC. (tested on Galaxy M30s)
Thanks to the developer of LADB
For downloads and other instructions : Click here
Reserved..
thanks .. good tut and very useful
Power off, then hold volume up and bixby button till recovery comes up. Works without a pc or cable.
realbbb
Moldly Going
realbbb said:
Power off, then hold volume up and bixby button till recovery comes up. Works without a pc or cable.
realbbb
Moldly Going
Click to expand...
Click to collapse
It's for users without root and pc
razs.originals said:
It's for users without root and pc
Click to expand...
Click to collapse
Power off, then hold volume up and bixby button till recovery comes up works for root, no-root, pc, or no-pc. It does not matter what version of OneUI.
realbbb
Purely Board
realbbb said:
Power off, then hold volume up and bixby button till recovery comes up works for root, no-root, pc, or no-pc. It does not matter what version of OneUI.
realbbb
Purely Board
Click to expand...
Click to collapse
Okay it might be working that way for you but many users reported that without connecting USB they aren't able to boot into recovery
recovery mode in android 11 one ui 3.1
Guys anybody know that how to go recovery mode in android 11 ( one ui 3.1 )
r2.community.samsung.com
Will this let me unlock bootloader?