Related
As the topictitle says....
http://www.htc.com/member/DownloadAddress.aspx?dl_id=398&type=Drivers
seems a rom update for some device yet to be added... Its posted today and is after the tytn and cruise camera fix.
Will this be the long awaited rom update for us?
cheers
Installation Instructions
Please read the following before starting the upgrade:
Before you proceed, please confirm that this software upgrade is a newer version than what is currently installed on your device. If it is the same version and your device is operating normally, there is no need to reinstall the software.
To check what version is installed on your device, click Start > Settings > Device Information > Version tab, and note the ROM version, CPU, and Radio version.
Please see the image on the right.
Warning!
* This is a generic software update. Any additional software or settings provided by your mobile operator or company will be lost. If you require this customization, please contact your supplier first before upgrading.
* Please note that this upgrade will erase any data stored on the device.
Please back up your data first before upgrading your device. Before you run the ROM Upgrade Utility (RUU), make sure you check and do the following:
* The USB sync cable is connected to your device and PC. If your PC is running Windows XPR, ActiveSyncR will run automatically to establish a connection. If your PC is running Windows VistaTM, then Windows Mobile Device Center will establish the connection between your device and PC.
* All running applications on the device have been closed.
* Make sure that the battery level of the device is least 50% (tap Start > Settings > System tab > Power).
* The update will take up to 30 minutes, DO NOT interrupt the update process, make/receive phone calls, disconnect the device from the PC, or press any buttons until the process has been completed.
Once the RUU is downloaded, launch the application on your PC and follow the instructions.
Please check this box if you wish to download this software
Please Select
Please Select FTP HTC Europe HTC US HTC Asia
Click to expand...
Click to collapse
Doh you have to be some sort of member.
ChumleyEX said:
Doh you have to be some sort of member.
Click to expand...
Click to collapse
ditto, you do.
Can the post starter show us some mroe information?
Does it actually have a download link? I cant see why they would issue a whole rom update for the graphics fix, this is probably just the rom with the camera fix included.
knowing htc
if you can tell us what the image says about versions, I believe I have the most up to date official HTC rom available from late 2007.
flashy said:
ditto, you do.
Can the post starter show us some mroe information?
Does it actually have a download link? I cant see why they would issue a whole rom update for the graphics fix, this is probably just the rom with the camera fix included.
knowing htc
if you can tell us what the image says about versions, I believe I have the most up to date official HTC rom available from late 2007.
Click to expand...
Click to collapse
I've just tried but it appears that there's no download link at present (at least on my PC there isn't) . Just a box that says "Please Select" which normally lists the FTP locations (usually HTC US or HTC Europe) but it doesn't list any locations where the file can be downloaded from.
It also doesn't give any information as to what the file actually is.
Probably my works firewall blocking access - I've had this issue before where I can't download from HTC at work (although I can download from plenty of other sites). I'll try again when I'm home in about an hour.
Edited to add: I've just got home and tried again - still no download locations.
Got the same, 'Please select' box with no entries
Re
Me as well, no download option, but it wasnt there yesterday, and the text is speaking about a rom update....
end of march as promised...? so hopefully they ad a rom behind it soon
I have the same problem with the 'Please select' box...
I just called HTC Europe, but they said there was no new hotfix, and there aren't no phone software updates for the kaiser...
Hopefully, there they will at the locations fast
There's a few things wrong with that page - there's no image with the version number (which the text speaks of) either. It all looks pretty suspect to be honest - like it's just an empty template we were never meant to see.
Besides, the supposed March "fix" was reportedly just a cab file, not a full ROM update.
Checking the source code now;
Found one thing so far, this was commented out ( <!-- don't execute this code --> )
Code:
<!--<tr bgcolor="#ffffff" align="left">
<td align="left" class="plink"><img src="images/gfx/bulletLink_7x11.gif">
<a href='Download.aspx?dl_id=398&loc=us'>HTC US</a></td>
</tr>-->
Edit: TBH it looks like it's just a template
Camera fix
Hi all
I have the same problem (in Italy)!!
...but i downloaded it from here, you don't need the right language file, it will not change the default one!!!
Ciao
@[email protected] said:
Hi all
I have the same problem (in Italy)!!
...but i downloaded it from here, you don't need the right language file, it will not change the default one!!!
Ciao
Click to expand...
Click to collapse
Ehm, this isn't about the Photo Hot Fix
Btw in my opinion this is definitely a template file, but it isn't there to actually store the template. They obviously have some download ready that they will soon put online at that place.
Jasperrr said:
Ehm, this isn't about the Photo Hot Fix
Btw in my opinion this is definitely a template file, but it isn't there to actually store the template. They obviously have some download ready that they will soon put online at that place.
Click to expand...
Click to collapse
.... yes, you are right, sorry!!!
mybad!!!
Maybe they are waiting for the official wm 6.1 release.
Can't log into e-club now,somethining is wrong there, yet I was able to log in this morning and see all available downloads ?????
Mikulec said:
Maybe they are waiting for the official wm 6.1 release.
Click to expand...
Click to collapse
They said a couple of times that they'll be releasing an update before the end of march. And march is ending in 3 days.
shafez said:
Can't log into e-club now,somethining is wrong there, yet I was able to log in this morning and see all available downloads ?????
Click to expand...
Click to collapse
I can login, nothing updated afaik
I have check, but where is no download at all, but i'm purchase it whit Swedish language, so it might take some more days to release.
swiftgs said:
As the topictitle says....
http://www.htc.com/member/DownloadAddress.aspx?dl_id=398&type=Drivers
seems a rom update for some device yet to be added... Its posted today and is after the tytn and cruise camera fix.
Will this be the long awaited rom update for us?
cheers
Click to expand...
Click to collapse
I logged in e-club and found nothing new,but when i clicked on the link you provided it took me to the page you talk about.
which device is the update for as there is no indication for the device anywhere in the page?
Regards
shafez said:
I logged in e-club and found nothing new,but when i clicked on the link you provided it took me to the page you talk about.
which device is the update for as there is no indication for the device anywhere in the page?
Regards
Click to expand...
Click to collapse
I did and saw the same.....
Low_Down said:
I have check, but where is no download at all, but i'm purchase it whit Swedish language, so it might take some more days to release.
Click to expand...
Click to collapse
There's no download because it hasn't been added yet..
shafez said:
I logged in e-club and found nothing new,but when i clicked on the link you provided it took me to the page you talk about.
which device is the update for as there is no indication for the device anywhere in the page?
Regards
Click to expand...
Click to collapse
mchapman007 said:
I did and saw the same.....
Click to expand...
Click to collapse
Again, It's still an empty template
I tried again, and i found out that
http://www.htc.com/member/Download.aspx?dl_id=398&loc=us goes to
http://member.htc.com/downloadfiles/RomCode/HTC S620/
But i can't download anything, and i think is a rom for the S620, not the kaiser
Hey guys, i've been following this thread over here: http://forum.xda-developers.com/showthread.php?t=2456338 on getting Wifi Tether to work on my G2. I'd post in that thread, but i don't have permissions to.
I was able to get things to work on 4.2.2, but after the upgrade to 4.4.2, it stopped working. So i grabbed the updated APK, removed the odex file, set permissions and rebooted. I get the same error as the poster on page one, "Unfortunately, Settings has stopped." However i don't have any apps frozen.
Any ideas guys? Thanks!
replace
JA64Flyers said:
Hey guys, i've been following this thread over here: http://forum.xda-developers.com/showthread.php?t=2456338 on getting Wifi Tether to work on my G2. I'd post in that thread, but i don't have permissions to.
I was able to get things to work on 4.2.2, but after the upgrade to 4.4.2, it stopped working. So i grabbed the updated APK, removed the odex file, set permissions and rebooted. I get the same error as the poster on page one, "Unfortunately, Settings has stopped." However i don't have any apps frozen.
Any ideas guys? Thanks!
Click to expand...
Click to collapse
replace HotspotProvision with attached file... it will work 100% on kitkat 4.4.2 if you face any problem.. then msg me...
fadi81 said:
replace HotspotProvision with attached file... it will work 100% on kitkat 4.4.2 if you face any problem.. then msg me...
Click to expand...
Click to collapse
I gave that a shot and it didn't change my result. Fadi81 suggested an LG Update Tool. Is this the tool?
My searching didn't turn up much of a result. From what i gather, this pushes the update back out to my phone, probably overwriting Root in the process. Is this what i should be trying next?
*Edit: apparently i'm not allowed to post URL links either. -.- So here it is broken down: lg.com / us / support-mobile / lg-VS980#software, then there's a link at the bottom saying "LG G2 VS980 SOFTWARE UPDATE" and there's an update program listed there.
JA64Flyers said:
I gave that a shot and it didn't change my result. Fadi81 suggested an LG Update Tool. Is this the tool?
My searching didn't turn up much of a result. From what i gather, this pushes the update back out to my phone, probably overwriting Root in the process. Is this what i should be trying next?
*Edit: apparently i'm not allowed to post URL links either. -.- So here it is broken down: lg.com / us / support-mobile / lg-VS980#software, then there's a link at the bottom saying "LG G2 VS980 SOFTWARE UPDATE" and there's an update program listed there.
Click to expand...
Click to collapse
download attachment istall lg g2vs980 usb driver... put your phone into download ( when phone power off press volume up butten and insert usb cable this will go into download mode)
run then software... press option and then update recovery..... lg mobile support tool will download new software for your mobile install after that....
after fresh installation root your phone and replace file which i attached earlier..... good luck... i hope this will solve your problem....
LGMobile Support Tool
LGMobile Support Tool... download
format
and don't forget to format your mobile after new installation then go to replace your file....
fadi81 said:
and don't forget to format your mobile after new installation then go to replace your file....
Click to expand...
Click to collapse
An infinite number of thanks to you my friend! After operation 'clean slate', it's working perfectly. I must have forcibly removed something with titanium backup, or fragged something critical somewhere.
Edit: Just realized this wiped my SD card too. >_< Didn't see that coming. guess it's REALLY a clean slate now, lol.
Hello,
My 510 x64 phone received a new update from HTC.
OTA_A11_UL_K443_DESIRE_SENSE60_HTC_Europe_1.51.401.2-1.51.401.1_release_4271720d6aeagtsc88zjb1
Is a 30 Mb file that should contain some fixes.
The issue is that the phone re-boots in recovery and at 30 % of the green bar the installation fails. A red download icon shows in the middle of the screen and nothing happens.
In the past i flash some different recovery files but i returned to stock ( stock files that i found online for x64 - 16.0 MB (16,777,216 bytes) )
Can someone please advise if this could be related to my recovery image ?
mzqaddicted said:
Hello,
My 510 x64 phone received a new update from HTC.
OTA_A11_UL_K443_DESIRE_SENSE60_HTC_Europe_1.51.401.2-1.51.401.1_release_4271720d6aeagtsc88zjb1
Is a 30 Mb file that should contain some fixes.
The issue is that the phone re-boots in recovery and at 30 % of the green bar the installation fails. A red download icon shows in the middle of the screen and nothing happens.
In the past i flash some different recovery files but i returned to stock ( stock files that i found online for x64 - 16.0 MB (16,777,216 bytes) )
Can someone please advise if this could be related to my recovery image ?
Click to expand...
Click to collapse
I flashed stock recovery and update installed successfully, you can give me update file?
Uploaded the file
https://drive.google.com/file/d/0B_bbXjxfqWaeMEFjUmE1ZlhFMmM/view?usp=sharing
can you please share your stock boot & recovery files ?
mzqaddicted said:
Uploaded the file
https://drive.google.com/file/d/0B_bbXjxfqWaeMEFjUmE1ZlhFMmM/view?usp=sharing
can you please share your stock boot & recovery files ?
Click to expand...
Click to collapse
With this recovery I flashed update.
https://drive.google.com/open?id=0B3-NJk0QRfxXaG5sWDc1NG5tbzg&authuser=0
EDIT: Try this recovery, is extracted from update.
https://drive.google.com/file/d/0B3-NJk0QRfxXNzBZbFFiRk5HclE/view?usp=sharing
tried both of them and i have the same issue.
https://drive.google.com/file/d/0B_bbXjxfqWaeVXJqZFBIaTZySGc/view?usp=sharing
mzqaddicted said:
tried both of them and i have the same issue.
https://drive.google.com/file/d/0B_bbXjxfqWaeVXJqZFBIaTZySGc/view?usp=sharing
Click to expand...
Click to collapse
Lock bootloader => run this RUU => update
lucyr03 said:
Lock bootloader => run this RUU => update
Click to expand...
Click to collapse
the RUU installer doesn't work.. somehow.. after i accept the licence agreement nothing happens and the installation shield application disappears.
Thried on 2 dif computer, both W7 x64, latest drivers via HTC sync manager
updated Visual C++ Redistributable for Visual Studio 2012 Update 4
mzqaddicted said:
the RUU installer doesn't work.. somehow.. after i accept the licence agreement nothing happens and the installation shield application disappears.
Thried on 2 dif computer, both W7 x64, latest drivers via HTC sync manager
updated Visual C++ Redistributable for Visual Studio 2012 Update 4
Click to expand...
Click to collapse
Work for me, but take more time to open and you have to wait after accept license...
How i can lock bootloader? I am looking instruction and i can't find :/
Ok i find command "fastboot oem lock" lock bootloader. Now I install RUU from link on post lucyr03 but this version is Europe_1.51.401 .1. Today my phone first time find new update to version Europe_1.51.401 .2-1.51.401.2. What is a diffrent of this version?
Misarus said:
How i can lock bootloader? I am looking instruction and i can't find :/
Ok i find command "fastboot oem lock" lock bootloader. Now I install RUU from link on post lucyr03 but this version is Europe_1.51.401 .1. Today my phone first time find new update to version Europe_1.51.401 .2-1.51.401.2. What is a diffrent of this version?
Click to expand...
Click to collapse
Install RUU from my post and update with OTA.
mzqaddicted said:
Hello,
My 510 x64 phone received a new update from HTC.
OTA_A11_UL_K443_DESIRE_SENSE60_HTC_Europe_1.51.401.2-1.51.401.1_release_4271720d6aeagtsc88zjb1
Is a 30 Mb file that should contain some fixes.
The issue is that the phone re-boots in recovery and at 30 % of the green bar the installation fails. A red download icon shows in the middle of the screen and nothing happens.
In the past i flash some different recovery files but i returned to stock ( stock files that i found online for x64 - 16.0 MB (16,777,216 bytes) )
Can someone please advise if this could be related to my recovery image ?
Click to expand...
Click to collapse
I forgot you posted this already. I just received a 30MB update from Boost Mobile on the 32 bit version and it fails the same exact way yours does. I contacted HTC and Boost Mobile and it seems if it doesn't update properly we have to wait for HTC to release it in the form of a RUU, which I believe they will just wait for Lollipop and bundle this little fix in with the Lollipop update. I searched on their site to see if there was anyway we could manually update and it doesn't exist. There are only old ROMs. I tried some tricks to manually update and it failed every time. I am completely stock on the Boost Mobile RUU and I totally deleted everything before the install so there aren't any problems on my end. There is simply a problem with the way they are attempting to update our phones.
Pretty sure you cant update if unlocked and rooted. Has to be like out of the box running. I couldnt but I did update on my wifes locked/unrooted phone no problem. Took 10 minutes. Checking it out, couldnt really see much, if any, difference. 30mb is pretty small.
CSP III said:
Pretty sure you cant update if unlocked and rooted. Has to be like out of the box running. I couldnt but I did update on my wifes locked/unrooted phone no problem. Took 10 minutes. Checking it out, couldnt really see much, if any, difference. 30mb is pretty small.
Click to expand...
Click to collapse
I am on the Boost Mobile stock RUU, locked, and unrooted.
I just noticed the error message in the stock recovery:
htc/sprint_wwe_vm/htc_a11chl:4.4.2/KOT49H/373881.1:user/release-keys" || file_getprop("/system/build.prop", "ro.build.fingerprint") == "htc/sprint_wwe_vm/htc_a11chl:4.4.2/KOT49H/373881.2:user/release-keys"
Installation aborted.
Write host_mode:0 done
I did
adb shell
getprop ro.build.fingerprint on my phone and I got:
htc/sprint_wwe_vm/htc_a11chl:4.4.2/KOT49H/433600.1:user/release-keys
This is on the stock Boost RUU, locked, and unrooted.
There are some other items in build.prop that are different than what the update is looking for.
I am going to change them to what is in my phone and try again.
I don't expect it to work, but it can't hurt.
If it doesn't work, I'll try a stock Rom backup from this site, then try the update again.
Sounds good man. Check back in with the results, I'd like to see how it turns out for you. IMO though, I really think the update isn't worth all the hassle but I totally get it if you are/want to just get it to work. I'd probably do the same. good luck.
CSP III said:
Sounds good man. Check back in with the results, I'd like to see how it turns out for you. IMO though, I really think the update isn't worth all the hassle but I totally get it if you are/want to just get it to work. I'd probably do the same. good luck.
Click to expand...
Click to collapse
Thanks. I know it's not really worth the hassle, but I'm learning a lot by messing with it. It's not working, still. I may be wrong but I think they made a mistake with the build.prop when sending the updates to some of our phones. I think some of us just have to wait for Lollipop.
A few months ago I lost my k3 note but found it again recently. In between I bought another exactly the same (from the same source in Hong Kong) so now I have two. I'd like to give the spare phone to my wife but both phones have exactly the same mac address so can't connect to our home router at the same time.
I've tried a few apps which claim to change/spoof the mac address but they don't seem to work and anyway a temporary change is not ideal. Both phones are rooted and have twrp recovery and the same custom rom.
Help and suggestions would be welcome.
try sn writer tool.
panuganties said:
try sn writer tool.
Click to expand...
Click to collapse
Thanks for that help. I had a look at the process and it looks straightforward. The tutorial says "you need to have the database file of the same device on which you are going to flash the IMEI". It does not include any links to the sources of that database. So I am searching for the database but so far nothing I've downloaded has led to success.
Also have tried a different application, 'IMEI&SN Writer' but that too needs database to work.
dondougall said:
Thanks for that help. I had a look at the process and it looks straightforward. The tutorial says "you need to have the database file of the same device on which you are going to flash the IMEI". It does not include any links to the sources of that database. So I am searching for the database but so far nothing I've downloaded has led to success.
Also have tried a different application, 'IMEI&SN Writer' but that too needs database to work.
Click to expand...
Click to collapse
i already posted that database files in my last post,
here is the link.
http://forum.xda-developers.com/k3-note/help/null-invalid-imei-permanent-fix-100-t3472491
panuganties said:
i already posted that database files in my last post,
here is the link.
Thanks that helped a lot. Ive tried several times but this is as far as I get
"Start searching kernel com port and handshake"
Phone switches on and boots as normal
"Enter AP Meta Mode: Meta Result = Default - Fail"
I should have said that the phone is rooted and a custom rom (K3_NOTE_MM_6.0_1611_3.54.1_v17_ROW_D-CUOCO92) is installed. Would that be the cause of failure?
Click to expand...
Click to collapse
any rom no problem. check your drivers, and cable. try again with another comport and another cable, run sn writer as admin.
panuganties said:
i already posted that database files in my last post,
here is the link.
http://forum.xda-developers.com/k3-note/help/null-invalid-imei-permanent-fix-100-t3472491
Click to expand...
Click to collapse
Restored a backup of my wife's K3 note into my own. Pretty bad Idea. Now I have same MACs, same IMEIs, even flashing other ROMs.
Followed your instructions from your post but always got stuck at :
EnterAPMetaMode() : MetaResult = SPMETA_DLL::META_MAUI_DB_INCONSISTENT.
ROM is vibe-ui-3-5-1631-multi-language , first google result.
My \mddb folder looks like this:
BPLGUInfoCustomAppSrcP_MT6752_S00_K50T5_M_LTG_V8_1_ltg_n
BPLGUInfoCustomAppSrcP_MT6752_S00_K50T5_M_LWG_V8_1_lwg_n
DbgInfo_LR9.W1423.MD.LWTG.MP_AIO_5M_LTG_K50T5_M_LTG_V8_2016_03_18_18_01_1_ltg_n
DbgInfo_LR9.W1423.MD.LWTG.MP_AIO_5M_LWG_K50T5_M_LWG_V8_2016_03_18_18_01_1_lwg_n
MDDB_MT6752_S00_K50T5_M_LTG_V8_1_ltg_n.EDB
MDDB_MT6752_S00_K50T5_M_LWG_V8_1_lwg_n.EDB
Tried your databases too, but no sucess.
Any Ideas?
In my phone, system update section of setting, it shows new update namely EVA-L19C636B396. Current version is EVA-L19C636B394. Therefore I download the update, it is ok. When it becomes 100% download, the phone asked me to restart. Then I restart it. But after restarting it show error. It asked me to download the package, again.
I don't know why.
I see the update, and I can download it.
However, I cannot install it.
Please help me!
Thanks
Try the followimg, one and/or the other:
-Settings Advanced and choose Factory Reset with with Wiping Internal memory
-Choose Full update
zgfg said:
Try the followimg, one and/or the other:
-Settings Advanced and choose Factory Reset with with Wiping Internal memory
-Choose Full update
Click to expand...
Click to collapse
Thanks for your suggestion.
I have done it, however the problem used to show up. When I connect huawei hiSuite and check the update through computer, it shows "you have installed latest official version". But in my phone setting, it shows there is update!
I don't know why.
Kyaw Kyaw Lynn said:
Thanks for your suggestion.
I have done it, however the problem used to show up. When I connect huawei hiSuite and check the update through computer, it shows "you have installed latest official version". But in my phone setting, it shows there is update!
I don't know why.
Click to expand...
Click to collapse
Are you using firmware finder on your phone
udamster said:
Are you using firmware finder on your phone
Click to expand...
Click to collapse
Yes, last time I used it and updated! is that the main source of my problem?
Kyaw Kyaw Lynn said:
Yes, last time I used it and updated! is that the main source of my problem?
Click to expand...
Click to collapse
Since firmware finder app uses a proxy to bring in that update to the system update app that is why you only get the update in the system app. The HiSuite program on your computer doesn't have that proxy so that's why it doesn't show the latest update.
If you want to install C636B396. First make sure, you have the exact same firmware as your model (EVA-L19/09/29). and check with IMEI number if it's approved. If it is try to use the FULL-OTA file. And once your download starts, stop using the proxy (revert the wifi settings to default)
udamster said:
Since firmware finder app uses a proxy to bring in that update to the system update app that is why you only get the update in the system app. The HiSuite program on your computer doesn't have that proxy so that's why it doesn't show the latest update.
If you want to install C636B396. First make sure, you have the exact same firmware as your model (EVA-L19/09/29). and check with IMEI number if it's approved. If it is try to use the FULL-OTA file. And once your download starts, stop using the proxy (revert the wifi settings to default)
Click to expand...
Click to collapse
OK, it is very useful. I will try it, I hope that it will solve my problem!