i can't connect wiht samsung kies, it gives my this error: There was a problem installing this hardware: MTP Device. An error occurred during the installation of the device. The filname, directory name, or volume label syntax is incorrect. can anyone help me please
Uninstall Kies and then re install kies, that should re install the drivers. if that fails try this
http://forum.xda-developers.com/showthread.php?t=728929
Search MTP error /fix etc etc .
Its a specific error .
jje
HI,
when i tried to flash xperia sp i got this error ..plz help
- ERROR - Error flashing. Aborted
- ERROR - Drivers need to be installed for connected device.
- ERROR - You can find them in the drivers folder of Flashtool.
inot flashing?
babugd said:
HI,
when i tried to flash xperia sp i got this error ..plz help
- ERROR - Error flashing. Aborted
- ERROR - Drivers need to be installed for connected device.
- ERROR - You can find them in the drivers folder of Flashtool.
inot flashing?
Click to expand...
Click to collapse
the error message is telling you what to do. I think windows 8 makes it more difficult to use flash tools though.
rooting error
Parkside said:
the error message is telling you what to do. I think windows 8 makes it more difficult to use flash tools though.
Click to expand...
Click to collapse
i did flashing as per XDA instruction and it shows flashed but when i check wit root checker it shows not yet rooted , busy box ,super user not installed!!!!! and when i did it sencond time, while iam running RUN TIME exe it shows last "Installing busybox --- Remounting /system --- cleaning error: device not found --- Please wait device is now rebooting error: device not found" and after when i run again flash mode with XperiaSP_C530X_12.0.A.2.254_Kernel, it shows connected with flash mode and still showing the window "unplug ,back button and plug" no other responce..!!!! :fingers-crossed::fingers-crossed:
Requirements:
*) Phone with unlocked boot loader.
*) Windows PC (preferable win7)
*) IMEI and S/N writer tool
*) Drivers of CND and our mobile drivers installed
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....MAKE SURE YOU SELECT PROPER COM PORT. CHECK IT IN YOUR DEVICE MANGER. MY COMPUTER-->PROPERTIES-->DEVICE MANAGER-->PORTS AND COMS. NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....
Download All in One Zip
Reserved
Sent from my Micromax AQ4501 using XDA Free mobile app
Shrihari007 said:
Requirements:
*) Phone with unlocked boot loader.
*) Windows PC (preferable win7)
*) IMEI and S/N writer tool
*) Drivers of CND and our mobile drivers installed
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....MAKE SURE YOU SELECT PROPER COM PORT. CHECK IT IN YOUR DEVICE MANGER. MY COMPUTER-->PROPERTIES-->DEVICE MANAGER-->PORTS AND COMS. NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....
Download All in One Zip
Click to expand...
Click to collapse
What's CND
Sent from my A1 using XDA Free mobile app
Error while installing Cds Drivers
Error = the third party INS does not contain digital signatures or something like that Plz help OS = 8.1
For windows 8.1/8.1 Disable driver signature enforcement checking....
How to here :
https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8
Now on Window 7 it says enter meta mode failed
Hi
i Switched form 8.1 to window 7:crying: just for this method but in window 7 i installed every driver but when i connect my device the imei writter says enter meta mode failed:crying::crying::crying::crying::crying: and there is mmx logo on my A1
what to do bro guid plz!
Select correct com port
Sent from my Micromax AQ4501 using XDA Free mobile app
Code:
Steps:
1,Please power off the phone
2,Then plug in the USB cable
USB Bootup
Meta_DB Init Start:
Meta_DB Init PASS
Enter to ModemMeta Start:
Enter to ModemMeta Fail:
It is over !!
Error Message : Falied to enter meta mode.
Other than that CDC driver does not show up in the device manager either.
Any help please?
Please Help Mine Same Problem
mine too same problem what can i do
if you"ve fixed this problem plz tell me please help..!!!!!!!! I Am ****ed Up
PLEASE HELP................!!!!!!!!!!!!!!!!!!!!!!!!!!
please.!!!! reply:crying::crying::crying::crying:
:crying::crying:
Saatvik Shukla said:
Code:
Steps:
1,Please power off the phone
2,Then plug in the USB cable
USB Bootup
Meta_DB Init Start:
Meta_DB Init PASS
Enter to ModemMeta Start:
Enter to ModemMeta Fail:
It is over !!
Error Message : Falied to enter meta mode.
Other than that CDC driver does not show up in the device manager either.
Any help please?
Click to expand...
Click to collapse
Me too had same problem..... All you need to do is select proper com port
Sent from my Micromax AQ4501 using XDA Free mobile app
Shrihari007 said:
Requirements:
*) Phone with unlocked boot loader.
*) Windows PC (preferable win7)
*) IMEI and S/N writer tool
*) Drivers of CND and our mobile drivers installed
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....MAKE SURE YOU SELECT PROPER COM PORT. CHECK IT IN YOUR DEVICE MANGER. MY COMPUTER-->PROPERTIES-->DEVICE MANAGER-->PORTS AND COMS. NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....
Download All in One Zip
Click to expand...
Click to collapse
whether it can be done to overcome Invalid IMEI on Samsung Galaxy Note 2, bro?
No its only for mediatek devices
what are the ways that a imei number can get damaged?
hi all.
just asking this question to take care of not to do such things.
how can a imei number get damaged?
How to?? How to select proper driver
And How TO Do That?? please Explain i am in big trouble
Shrihari007 said:
Me too had same problem..... All you need to do is select proper com port
Sent from my Micromax AQ4501 using XDA Free mobile app
Click to expand...
Click to collapse
Does this work on every android phone?
Mine is galaxy note 10.1 n8000, with gnabo rom 4.4.2 running on it.
Sent from my Xperia Acro S using Tapatalk
Araragi said:
Does this work on every android phone? Mine is galaxy note 10.1 n8000, with gnabo rom 4.4.2 running on it.
Click to expand...
Click to collapse
the answer is here.
why he is not replying????
I am in invalid imei
Why the thread maker is not replying instead you check this video on YouTube for repair the another way
https://youtu.be/8DT-32tPbMY
Sagar Kapasi said:
And How TO Do That?? please Explain i am in big trouble
Click to expand...
Click to collapse
Enter to ModemMeta Fail
Now what to Do ? I install the CDC Driver but it still says failed to enter meta mode ? i am on win7 32bit! is this only for 64 bit ?
I have lost my imei, wifi Mac Address, and Serial Number ?
I am in a Big Trouble ...PLZ help me!
srikantrn said:
Enter to ModemMeta Fail
Now what to Do ? I install the CDC Driver but it still says failed to enter meta mode ? i am on win7 32bit! is this only for 64 bit ?
I have lost my imei, wifi Mac Address, and Serial Number ?
I am in a Big Trouble ...PLZ help me!
Click to expand...
Click to collapse
Read the thread carefully!
Flash the stock ROM via SP flash tools.
Sent from my Sparkle V
Hello, I am sorry if this post has already been made somewhere but I still can't find the answer for fixing the problem suggested in the title and I may have posted this on a wrong section earlier, very sorry
So I have a GT-S5830 Galaxy Ace and decided to install CyanogenMod 7 with CWM. The flashing of the phone was a success but I came across a bug (or problem?) of screen orienteering and I couldn't find that answer. Right after this, I then decide to restore back to stock ROM. However, I came across a problem when connecting the device (in Download Mode) to my PC; it stated Unknown USB Device (Device Failed Enumeration) in Device Manager.
Following Procedures I have done:
- USB Debugging enabled on phone
- Samsung USB Driver installed
- All drivers on PC up-to-date
I am also following a guide to restore back to ROM using Odin Multi Downloader, but it does not recognize the phone in ID:COM. The bleep on the PC can be heard but it only recognizes when the phone is in normal mode; in Download Mode it shows Unknown USB Device (Device Failed Enumeration). Please help as I am giving this phone to my sibling.
Thank you.
I'm not an expert by any means, in fact just starting out, but I think you could load the recovery kernel onto your SD card and then boot in recovery mode, select 'load from SD card' (or something similar), select the file on your SD and do it that way. Try looking at wiki . cyanogenmod . org/w/Install_CM_for_cooper (take the spaces out of this URL). You may also need the ADB, I'm not sure, but the details are in that link.
Hope this helps!
Hello,
I'm on CM13 for Honor 4x Indian version. My problem is that if I enter into the diag mode by entering the command 'setprop sys.usb.config diag,adb' with sudo privileges the QPST doesn't show the phone as connected.
After the entry of the above command I could see the Qualcomm driver 901D detected by the device manager of Windows 10 lappy. On opening QPST I could see the port getting populated which is same as the port detected by device manager. But the 'Phone ' column says 'No Phone'. And further is I open the QXDM with the port enabled, I dont see the fields enabled like say NV(no white background) and instead shows grey background indicating the phone is not detected. I have another Qualcomm chipset Android smartphone with which I could see the phone getting detected by QPST& QXDM and could see various NV fields.
Please guide me in solving this problem.
Thanks
Embeddednut said:
Hello,
I'm on CM13 for Honor 4x Indian version. My problem is that if I enter into the diag mode by entering the command 'setprop sys.usb.config diag,adb' with sudo privileges the QPST doesn't show the phone as connected.
After the entry of the above command I could see the Qualcomm driver 901D detected by the device manager of Windows 10 lappy. On opening QPST I could see the port getting populated which is same as the port detected by device manager. But the 'Phone ' column says 'No Phone'. And further is I open the QXDM with the port enabled, I dont see the fields enabled like say NV(no white background) and instead shows grey background indicating the phone is not detected. I have another Qualcomm chipset Android smartphone with which I could see the phone getting detected by QPST& QXDM and could see various NV fields.
Please guide me in solving this problem.
Thanks
Click to expand...
Click to collapse
fixed your issue?
Embeddednut said:
Hello,
I'm on CM13 for Honor 4x Indian version. My problem is that if I enter into the diag mode by entering the command 'setprop sys.usb.config diag,adb' with sudo privileges the QPST doesn't show the phone as connected.
After the entry of the above command I could see the Qualcomm driver 901D detected by the device manager of Windows 10 lappy. On opening QPST I could see the port getting populated which is same as the port detected by device manager. But the 'Phone ' column says 'No Phone'. And further is I open the QXDM with the port enabled, I dont see the fields enabled like say NV(no white background) and instead shows grey background indicating the phone is not detected. I have another Qualcomm chipset Android smartphone with which I could see the phone getting detected by QPST& QXDM and could see various NV fields.
Please guide me in solving this problem.
Thanks
Click to expand...
Click to collapse
Is your issue solved? If yes, Can you provide the steps to the solution?