I wrongly flashed 8GB stock ROM in my 4GB GIONEE M2 and now my phone is hard - bricked it does not shows charging and recovery . It's not even dected by SP flash tool i tries format+ download option too and tries to connect my phone with pressing volume up / volume down button sp flash tool says BROM failed. I also tried charging it for 24 hrs though different chargers . so please help me out .
hiii i am mihir can you pls send me gionee m2 8g kitket rom link
So i can help you and me
YASH_OJHA said:
I wrongly flashed 8GB stock ROM in my 4GB GIONEE M2 and now my phone is hard - bricked it does not shows charging and recovery . It's not even dected by SP flash tool i tries format+ download option too and tries to connect my phone with pressing volume up / volume down button sp flash tool says BROM failed. I also tried charging it for 24 hrs though different chargers . so please help me out .
Click to expand...
Click to collapse
there is no 8 gb or 4 gb rom i have seen rom files for both and partioning is same for both as internal storage is at 1.78 gb and rest is allocated to data partition for both now for the issue you are facing try flashing wihtout battery , if not works format using flash tool except bootloader then flash rom using sp flash tool
Hi Guys,
I too flashed my Gionee M2 8GB mobile with 4 GB rom version and it got hard bricked, altough its detected by my laptop, Im not able to format it or download 8GB ver in it, its not showing charging and its not switching on as well
YASH_OJHA said:
I wrongly flashed 8GB stock ROM in my 4GB GIONEE M2 and now my phone is hard - bricked it does not shows charging and recovery . It's not even dected by SP flash tool i tries format+ download option too and tries to connect my phone with pressing volume up / volume down button sp flash tool says BROM failed. I also tried charging it for 24 hrs though different chargers . so please help me out .
Click to expand...
Click to collapse
https://forum.xda-developers.com/gionee-m2/help/how-to-unbrick-gionee-m2-device-t2816697
Related
Plzz help me...
My phone xiaomi mi3 first stuck on bootloop then i tried to flash any rom..
Bt while flashing the phone became off...and when i am turning it onn...then only notification led blinks red 3 times..CWM is also not opening ..plzz help me
plzz ..
Is there any way to flash or xiaomi has fastboot mode? ?! or how to flash through pc????????
plzz tell what should i do..
my phone is INDIAN VERSION
AmanNawaz said:
Plzz help me...
My phone xiaomi mi3 first stuck on bootloop then i tried to flash any rom..
Bt while flashing the phone became off...and when i am turning it onn...then only notification led blinks red 3 times..CWM is also not opening ..plzz help me
plzz ..
Is there any way to flash or xiaomi has fastboot mode? ?! or how to flash through pc????????
plzz tell what should i do..
my phone is INDIAN VERSION
Click to expand...
Click to collapse
dont panic ,
xiaomi has fastboot mode just restrt the phone and press power and vol down you will get into fastboot mode
before that just download the fastboot rom frm here,
http://en.miui.com/thread-14641-1-1.html
after downloading the rom ,download mi flash tool
after downloading everything just put your phone to fastboot mode
install mi flash tool on your pc/lap
just on top left ,you will find browse option
just go to the directory where you have unzipped the rom,chose the file
then connect your phone through usb cable it will get detected if not theres a button called refresh just press it and it will get detected
then just flash the rom, it will hardly take 90 secs to flash
now you have working mi3 with miui rom have fun
Sir can you help me on flashing ..on any social network site...canyou add me on fb
aman.nawaz.71
its a request ..plzzzz
Did you solve your prob? If not, PM me.
Stick on It....plzz anyone help :'(
i have already told you how to do it,why dont you simply follow the steps
Listen to zenr2 and do what he has suggested before hitting panic all over
all the best
Sent from my Nexus 5 using Tapatalk
Thanxx all gyzzzzz.....i have successfully recovered my phone
AmanNawaz said:
Thanxx all gyzzzzz.....i have successfully recovered my phone
Click to expand...
Click to collapse
well thats good now have fun,and don't brick your device again
Thanx ZenR2 ...Bro You are simply just awesome
What is the Solution?
AmanNawaz said:
Thanxx all gyzzzzz.....i have successfully recovered my phone
Click to expand...
Click to collapse
I am happy to know that you got your phone working again, but can you please tell where did you went wrong and what is the solution behind it. So that other's can know about it too.
Regards.
Ask ZenR2
I tried to install rosemary fonts in my turbo ... I flashed the zip with cwm recovery ... After flashing it , the phone got stuck on canvas turbo logo ... I tried to flash the stock rom .. Bt while connecting it to sp flash tool i removed out the usb when device was detecting in sp flash tool ... The phn is not starting up now... Led is also not glowing when i connect it to charging before connecting in sp flash tool charging was done ... Now the phn is juzz not starting up ... I took it to care center bt they are saying tht internal display is broken out and it costs more than 7k ... I cant understand thts it software or hardware issue ... Is my phone brick ? ... I juzz can't under tht what is happened to my phone .. Needed expert advice urgent ... Plzzz plzzz help out
Use "Format+Download" option in SPtools
SPtool us not detecting only now my phone
_yassh_ said:
SPtool us not detecting only now my phone
Click to expand...
Click to collapse
Reinstall drivers and try again.
I tried a lot ... Bt my phone is dead nd it's showing nothing
plzz help me out
battery removal.
_yassh_ said:
plzz help me out
Click to expand...
Click to collapse
.
I heard we can connect with simulating battery pulling or removing the battery any body no how to remove the battery
Factory reset your phone
i updated to kitkat chinese version from jellybean international version,initially it showed no service.Also there was online update available
so i updated the updated started then in last it showed some error i rebooted the cell however it never got on instead it vibrates after every 20/30 secs
but its dead please help me out
then I tried Unbrick with sp tools but it gave me fail message
it's completely dead
no respond so what ever
no recover no vibrates
just when I put the USB cable with the battery out my PC gives me a concocted device sound then a disconnected sound
what ?????
mahmoudms said:
i updated to kitkat chinese version from jellybean international version,initially it showed no service.Also there was online update available
so i updated the updated started then in last it showed some error i rebooted the cell however it never got on instead it vibrates after every 20/30 secs
but its dead please help me out
then I tried Unbrick with sp tools but it gave me fail message
it's completely dead
no respond so what ever
no recover no vibrates
just when I put the USB cable withe the battery out my PC gives me a concocted device sound the a disconnected sound
what ?????
Click to expand...
Click to collapse
try different options available in Sp flash tools like downloaded only , firmware upgrade , download + firmware upgrade ..
Faiyaz5yaz said:
try different options available in Sp flash tools like downloaded only , firmware upgrade , download + firmware upgrade ..
Click to expand...
Click to collapse
all I got is nothing
no respond what so ever
mahmoudms said:
all I got is nothing
no respond what so ever
Click to expand...
Click to collapse
guess your device has boot loader..
this thread might help u .. http://forum.xda-developers.com/showthread.php?t=2773098
Hello, today when i tried to install http://forum.xda-developers.com/showthread.php?p=48806481#post48806481 (CWM Recovery), i bricked my phone .
I have bootloop with samsung logo . I cant boot phone to normal mode or recovery . The "ARM9" and download modes are working.
I tried to install stock rom with odin, but its stucked on "setupConnection" step.
Is there any way how to fix & bring my phone to life again?
Thanks.
Please, help me . My battery will be soon dead :crying:
Do you have an older version of cwm on ur phone?
Switch off ur phone and try to boot into recovery..
Sent from my Micromax A110 using XDA Free mobile app
I cant .:laugh: boot into recovery ...
Minnimous said:
I cant .:laugh: boot into recovery ...
Click to expand...
Click to collapse
Hey,
Can you boot into download mode if it is yes you can use Odin to recover your phone.
JanniekM00 said:
Hey,
Can you boot into download mode if it is yes you can use Odin to recover your phone.
Click to expand...
Click to collapse
As you can see in first post, when i try to install stock ROM via Odin, it stops on step "setupConnection" .
Minnimous said:
As you can see in first post, when i try to install stock ROM via Odin, it stops on step "setupConnection" .
Click to expand...
Click to collapse
Use a another usb cable or use another computer
JanniekM00 said:
Use a another usb cable or use another computer
Click to expand...
Click to collapse
I tried it on Windows 8 , but it was not recognized (unknown device) and it wasnt in Odin, on windows 7 it was recognized bud stucked ... i dont have more computers. I tried 2 different cables , but none was original (i dont have original, so i tried cables from sony and prestigio.
Today i spent 8 hours trying to repair my phone ... still not working . Are here any experienced users that can help me?
Minnimous said:
Today i spent 8 hours trying to repair my phone ... still not working . Are here any experienced users that can help me?
Click to expand...
Click to collapse
If you can't fix your device via odin you need JTAG
Minnimous said:
Today i spent 8 hours trying to repair my phone ... still not working . Are here any experienced users that can help me?
Click to expand...
Click to collapse
Have you got the Samsung's drivers installed on your computer? I assume you are using the corret Odin version, so let's go you can try it
Prepare you computer to use Odin and flash a new rom, remove battery and connect your galaxy ace to your computer. Then insert the battery holding VOLUME DOWN + POWER + HOME BUTTONS. Odin should detect your device, (Yellow rectangle) so you are ready ro START the process
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
afireon8 said:
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
Click to expand...
Click to collapse
It is recommended never to use "download+format all" option ......I have many times used sp flash tools for flashing stock rom ....I always used "firmware upgrade" option......I never faced any problem ....
same here bro...
my a1 also dead after flashing and not powering on
not even shows charging....
plz post if found any solution...
found something
i cannot try this because i dont hv fon with me....
http://forum.xda-developers.com/showthread.php?t=1943442
Try latest sptool i also face this problem & flash stock rom lollipop build may it will help you )*
just use sp flash tool 5.142
Guys m facing the same problem... Using sp flash tool version 5.1604 .. Help me plz