Hard Brick Android one micromax AQ4501 plz help - Android One (First-Generation) Cross-Device Genera

android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.

afireon8 said:
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
Click to expand...
Click to collapse
It is recommended never to use "download+format all" option ......I have many times used sp flash tools for flashing stock rom ....I always used "firmware upgrade" option......I never faced any problem ....

same here bro...
my a1 also dead after flashing and not powering on
not even shows charging....
plz post if found any solution...

found something
i cannot try this because i dont hv fon with me....
http://forum.xda-developers.com/showthread.php?t=1943442

Try latest sptool i also face this problem & flash stock rom lollipop build may it will help you )*

just use sp flash tool 5.142

Guys m facing the same problem... Using sp flash tool version 5.1604 .. Help me plz

Related

[HELP] GT9001 OS ruined with Kies , help please

Hello everyone , I recently bought a GT9001 also known as galaxy S plus , so here's my desperate problem ... today about 4 hours ago , that POS program Samsung Kies told me there's a new firmware available so I hit upgrade ... it got stuck at about 60% then after 1 hour and a half I unpluged the phone from the USB ... since then I can't get rid of Recovery Mode .... before all this the phone had Android gingerbread , was working perfectly I loved it .. and now I think it's bricked ... I'm not good at this , I've tried with odin .. but it gets stuck ... please someone kind enough , help me get it back to its default state ... i have no idea what I'm doing here ... and i'm kinda desperate i need the phone asap
gotta mention I was able to get it in download mode via the three buttons ... can someone tell me what i need in order to fix it?
If u can access download mode than its not bricked download a stock rom flash it.....
sent from my GT-I9000 using xda premium
this is where I get stuck
http ://img706[DOT]imageshack[DOT]us/img706/8782/30950752[DOT]jpeg , sorry for the lame link I can't post outgoing links yet.
i have no idea what odin version to use or which one works, what ROM to use , all those files are from different sources i dont tink that's right
dualzo said:
Hello everyone , I recently bought a GT9001 also known as galaxy S plus , so here's my desperate problem ... today about 4 hours ago , that POS program Samsung Kies told me there's a new firmware available so I hit upgrade ... it got stuck at about 60% then after 1 hour and a half I unpluged the phone from the USB ... since then I can't get rid of Recovery Mode .... before all this the phone had Android gingerbread , was working perfectly I loved it .. and now I think it's bricked ... I'm not good at this , I've tried with odin .. but it gets stuck ... please someone kind enough , help me get it back to its default state ... i have no idea what I'm doing here ... and i'm kinda desperate i need the phone asap
gotta mention I was able to get it in download mode via the three buttons ... can someone tell me what i need in order to fix it?
Click to expand...
Click to collapse
use Kies recovery procedure http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html
Flash a i9001 rom using odin
so I've been trying for 5 hours to fix my semi-bricked phone and I can't do anything .... I've tried with odin 4.43 and some stock ROM-s ... but it gets stuck ... god damn it what should I do , i have no warranty ... GSM service , do they know how to fix things like these? it seems complicated
http[dots]//img18[dot]imageshack.us/img18/6763/96005243[dot]jpg ---> i get stuck with odin here
L.E
So I finally managed to fix it with AiresVE.ops , MultiLoader Odin v.4.43 and an official ROM from sammobile , it took 8 minutes but I had to do it on my laptop. Thanks for everything guys.
Hi,
some time ago i got the same problem But don't worry it's easy to solve..
Just download this one:
http://forum.xda-developers.com/showthread.php?t=1694617
and download this one to get a stock rom:
http://forum.xda-developers.com/showthread.php?t=1032437
or i recommend the broodrom which is based on the valuepack an works just flawless on my i9001
http://forum.xda-developers.com/showthread.php?t=1696381
then copy both .zips to your external sd and then boot into recovery (press vol+ and power button.. wait 3-5sec and release.. when the android thing & a box appears press and hold the home button (the left touchbutton))
if you're now in the recovery mode, click on "install update via zip" or something like that..
then you navigate to your external sd where the 2 files are
then you install the teamwinrecovery (zip file) after that you shutdown your system (pull the battery^^)
then boot again into recovery and you will see a new recovery (it's the teamwinrecovery)
this can be controlled with your touchscreen
now you click again on "install update via zip" or something like that an navigate again to your external sd..
for that you should navigate on the tip level and open a folder called "emmc"
There you install the other zip (it's your rom) an wait until it's finished
it will reboot automatically
If you get stuck in a recovery loop you should flash the bootloader with odin.. (instructions are given in the teamwinrecovery thread)
Good Luck and sorry for my horrible English
You can send me a pm if you have questions

faild to mount efs // internal storage 0.00b !!

im facing a surios problem which i've been trying too long to solve with no results
first my phone is on factory mode ,, and every time i use ADB shell to change the factory mode from off to on and reboot ,, its back again
second when i boot into recovery it keeps telling faild to mount efs ... ( i still have my imei num. , mac address ...... etc ) all still shown on the phone and i still can make calls and connect through wifi
and last but not least ,, my internal storage is giving 0.00b ,, so i cand install any apk
things i tried :
flash official stock firmware with odin
use adb to give some codes to get rid of factory mode which dosnt work !
cant really tell what caused this ,, since this phone belongs to my friend who dosnt seem to know anything >_<
any one can help plz !!!
any one ?!?
plzzz help !!!
Which model do you have?
Odin works? Or it says "success", but it flashed nothing? Try flashing another firmware version or another rom to check this.
Clostry said:
Which model do you have?
Odin works? Or it says "success", but it flashed nothing? Try flashing another firmware version or another rom to check this.
Click to expand...
Click to collapse
thx for replaying
odin works and says "success" ,,but every time it got stuck on booting ,, the only working firmware is the stock from samsung ,, with the problems mentioned above

I have BRICKED my phone :(

Plzz help me...
My phone xiaomi mi3 first stuck on bootloop then i tried to flash any rom..
Bt while flashing the phone became off...and when i am turning it onn...then only notification led blinks red 3 times..CWM is also not opening ..plzz help me
plzz ..
Is there any way to flash or xiaomi has fastboot mode? ?! or how to flash through pc????????
plzz tell what should i do..
my phone is INDIAN VERSION
AmanNawaz said:
Plzz help me...
My phone xiaomi mi3 first stuck on bootloop then i tried to flash any rom..
Bt while flashing the phone became off...and when i am turning it onn...then only notification led blinks red 3 times..CWM is also not opening ..plzz help me
plzz ..
Is there any way to flash or xiaomi has fastboot mode? ?! or how to flash through pc????????
plzz tell what should i do..
my phone is INDIAN VERSION
Click to expand...
Click to collapse
dont panic ,
xiaomi has fastboot mode just restrt the phone and press power and vol down you will get into fastboot mode
before that just download the fastboot rom frm here,
http://en.miui.com/thread-14641-1-1.html
after downloading the rom ,download mi flash tool
after downloading everything just put your phone to fastboot mode
install mi flash tool on your pc/lap
just on top left ,you will find browse option
just go to the directory where you have unzipped the rom,chose the file
then connect your phone through usb cable it will get detected if not theres a button called refresh just press it and it will get detected
then just flash the rom, it will hardly take 90 secs to flash
now you have working mi3 with miui rom have fun
Sir can you help me on flashing ..on any social network site...canyou add me on fb
aman.nawaz.71
its a request ..plzzzz
Did you solve your prob? If not, PM me.
Stick on It....plzz anyone help :'(
i have already told you how to do it,why dont you simply follow the steps
Listen to zenr2 and do what he has suggested before hitting panic all over
all the best
Sent from my Nexus 5 using Tapatalk
Thanxx all gyzzzzz.....i have successfully recovered my phone
AmanNawaz said:
Thanxx all gyzzzzz.....i have successfully recovered my phone
Click to expand...
Click to collapse
well thats good now have fun,and don't brick your device again
Thanx ZenR2 ...Bro You are simply just awesome
What is the Solution?
AmanNawaz said:
Thanxx all gyzzzzz.....i have successfully recovered my phone
Click to expand...
Click to collapse
I am happy to know that you got your phone working again, but can you please tell where did you went wrong and what is the solution behind it. So that other's can know about it too.
Regards.
Ask ZenR2

[Q] Canvas turbo not starting

I tried to install rosemary fonts in my turbo ... I flashed the zip with cwm recovery ... After flashing it , the phone got stuck on canvas turbo logo ... I tried to flash the stock rom .. Bt while connecting it to sp flash tool i removed out the usb when device was detecting in sp flash tool ... The phn is not starting up now... Led is also not glowing when i connect it to charging before connecting in sp flash tool charging was done ... Now the phn is juzz not starting up ... I took it to care center bt they are saying tht internal display is broken out and it costs more than 7k ... I cant understand thts it software or hardware issue ... Is my phone brick ? ... I juzz can't under tht what is happened to my phone .. Needed expert advice urgent ... Plzzz plzzz help out
Use "Format+Download" option in SPtools
SPtool us not detecting only now my phone
_yassh_ said:
SPtool us not detecting only now my phone
Click to expand...
Click to collapse
Reinstall drivers and try again.
I tried a lot ... Bt my phone is dead nd it's showing nothing
plzz help me out
battery removal.
_yassh_ said:
plzz help me out
Click to expand...
Click to collapse
.
I heard we can connect with simulating battery pulling or removing the battery any body no how to remove the battery
Factory reset your phone

HARD - BRICKED GIONEE M2 due to wrong ROM flashing

I wrongly flashed 8GB stock ROM in my 4GB GIONEE M2 and now my phone is hard - bricked it does not shows charging and recovery . It's not even dected by SP flash tool i tries format+ download option too and tries to connect my phone with pressing volume up / volume down button sp flash tool says BROM failed. I also tried charging it for 24 hrs though different chargers . so please help me out .
hiii i am mihir can you pls send me gionee m2 8g kitket rom link
So i can help you and me
YASH_OJHA said:
I wrongly flashed 8GB stock ROM in my 4GB GIONEE M2 and now my phone is hard - bricked it does not shows charging and recovery . It's not even dected by SP flash tool i tries format+ download option too and tries to connect my phone with pressing volume up / volume down button sp flash tool says BROM failed. I also tried charging it for 24 hrs though different chargers . so please help me out .
Click to expand...
Click to collapse
there is no 8 gb or 4 gb rom i have seen rom files for both and partioning is same for both as internal storage is at 1.78 gb and rest is allocated to data partition for both now for the issue you are facing try flashing wihtout battery , if not works format using flash tool except bootloader then flash rom using sp flash tool
Hi Guys,
I too flashed my Gionee M2 8GB mobile with 4 GB rom version and it got hard bricked, altough its detected by my laptop, Im not able to format it or download 8GB ver in it, its not showing charging and its not switching on as well
YASH_OJHA said:
I wrongly flashed 8GB stock ROM in my 4GB GIONEE M2 and now my phone is hard - bricked it does not shows charging and recovery . It's not even dected by SP flash tool i tries format+ download option too and tries to connect my phone with pressing volume up / volume down button sp flash tool says BROM failed. I also tried charging it for 24 hrs though different chargers . so please help me out .
Click to expand...
Click to collapse
https://forum.xda-developers.com/gionee-m2/help/how-to-unbrick-gionee-m2-device-t2816697

Categories

Resources