Related
DOES ANY KNOW HOW TO PUT THIS DEVICE ON DIAG MODE.
CHECKED Settings - Wireless Networks - Click to Dialup Networking THIS OPTION IS NOT THERE, ALSO Diag/Testing Mode
*#4636*1111# DOES NOT WORK..
try **usbui on the dialer, it works for fascinate so it's worth a shot
I tried that but it did not work, I believe mainly because verizon removed the dialer from it, I had to instal a version ported from the fascinate I'll just keep trying because verizon went out of their way to make sure we dont use it as a phone but all the necesesary hardware is included on the tablet...
hesantos83 said:
I tried that but it did not work, I believe mainly because verizon removed the dialer from it, I had to instal a version ported from the fascinate I'll just keep trying because verizon went out of their way to make sure we dont use it as a phone but all the necesesary hardware is included on the tablet...
Click to expand...
Click to collapse
do you have a link to the dialer?
this is how i got the tablet to go in diagnostic mode. downloaded launcher pro from the marker, add hold to add shortcut on the screen go to activities then phoneutil and then phoneutil and select it. then make sure UART AND USB have the modem select it and that's it. now we just need the 16 digit password so we can play with qpst.. I tried most of the known passwords on cdma workshop but none of them worked..
hesantos83 said:
this is how i got the tablet to go in diagnostic mode. downloaded launcher pro from the marker, add hold to add shortcut on the screen go to activities then phoneutil and then phoneutil and select it. then make sure UART AND USB have the modem select it and that's it. now we just need the 16 digit password so we can play with qpst.. I tried most of the known passwords on cdma workshop but none of them worked..
Click to expand...
Click to collapse
a little help please, I did what you said and it all worked, but how do you access the dialer? I only get an error message that says "cannot make or take a call using Galaxy tab"
Uh even easier method to enter diag.
Go to to notes, In the search type
**usbui [**87284]
Thanks. Your **87284 (search) method was great. How do we find out the 16-digit password for CDMA Workshop?
Anyone? I tried all 101 Samsung ones, but they all fail.
Do you have a Verizon Tab firmware? My tab gets down.
It can only got into "Download mode" after I flashed it with Euro and Asian Firmware.
I'm very very worried about it.
Help me.
xiaobaixiaokai said:
Do you have a Verizon Tab firmware? My tab gets down.
It can only got into "Download mode" after I flashed it with Euro and Asian Firmware.
I'm very very worried about it.
Help me.
Click to expand...
Click to collapse
me too having the same problem
and I'm so tired from searching for the stock firmware
xiaobaixiaokai said:
Do you have a Verizon Tab firmware? My tab gets down.
It can only got into "Download mode" after I flashed it with Euro and Asian Firmware.
I'm very very worried about it.
Help me.
Click to expand...
Click to collapse
HA4ever said:
me too having the same problem
and I'm so tired from searching for the stock firmware
Click to expand...
Click to collapse
Guys, check out Alldroid in their galaxy tab forum they have a get back to stock post with the verizon firmware.
i800
please!can me more about search metod
if you can lay out a picture about search metod **87284 please!
big big thanks
PAULC91316 said:
Thanks. Your **87284 (search) method was great. How do we find out the 16-digit password for CDMA Workshop?
Anyone? I tried all 101 Samsung ones, but they all fail.
Click to expand...
Click to collapse
Use default samsung
It work I have used it
hi...
can anyone tell me the command to leave diag-mode IN QPST/QXDM...
not the dialer...
would be really great...
got her done
i installed kies for the drivers did the downloaded launcher pro from the marker, add hold to add shortcut on the screen go to activities then phoneutil and then phoneutil and select it then make sure UART AND USB have the modem select it and that's it. that should let you see it on the diag port open cdma workshop used the samsung default password changed prl and mdn min and evdo settings
im on an android plan which automatically gets your web rolling
the evdo changed on me twice but i just put it back and it stuck
i couldnt get the notepad i dont know where its at to do the **usbui but this was cool thanks for all the help i take no credit for this i just read these forums and im just repeating what i read on here thanks for all the help
in memo type ##8778#
work!)))
Anyone get this tablet working on Cricket or MetroPCS yet?
ncat.hq said:
in memo type ##8778#
work!)))
Click to expand...
Click to collapse
When i type ##8778#, there is nothing !
Please help me, my tab is Verizon galaxy tab
Hi all, Please excuse my English, I tried to do the flash in my sch-I800
verizon.Not good, because now it appears the logo of Samsung
tab.Can I do right? To work again? Thank you very much
qualcomm
Hi guys,
Thanks for the useful hints about the diagnostic interface.
Is there a Qualcomm chip in your Galaxy Tab, since you can use the QXDM interface? In my case there appears an unrecognized "7 CDCs" device.
I applied your descriptions also to the Galaxy S+ (Qualcomm chip) and could open a QXDM connection. Unfortunately the device doesn't answer.
Thanks,
eidelen
I made the the mistake of activating the lockscreen password feature of my Galaxy Note and now I can't seem to deactivate the feature. When trying to turn off screen lock password under the security menu - you will see in the screenshot that it "deactivate" option is greyed out.
Anyone know why its like this? How to go around this problem? By the way, I am using ICS Version 4.0.3.
kuplet said:
I made the the mistake of activating the lockscreen password feature of my Galaxy Note and now I can't seem to deactivate the feature. When trying to turn off screen lock password under the security menu - you will see in the screenshot that it "deactivate" option is greyed out.
Anyone know why its like this? How to go around this problem? By the way, I am using ICS Version 4.0.3.
Click to expand...
Click to collapse
if its a custom ROM...try Reflashing !!
Rulinglionadi said:
if its a custom ROM...try Reflashing !!
Click to expand...
Click to collapse
Nope its not a custom ROM. I'm using the official update from Samsung.
setting - security - screen lock - select None
Edit : sorry just now seen screenshot, its not available for you.
are using any password storage appl n deleted it?
I think wiping can solve this, but not advisable on ICS.
have you tried changing the option ? Like selecting Pin Number, Then see if 'None' becomes selectable ?
Sure is strange
kuplet said:
I made the the mistake of activating the lockscreen password feature of my Galaxy Note and now I can't seem to deactivate the feature. When trying to turn off screen lock password under the security menu - you will see in the screenshot that it "deactivate" option is greyed out.
Anyone know why its like this? How to go around this problem? By the way, I am using ICS Version 4.0.3.
Click to expand...
Click to collapse
Hi,
If you go to the samsungdive.com website and register your device, you will be able to reset any activation priorly set with the remote 'unlock screen' feature.
Pierrick
Thanks for all the replies. Was able to finally reset the "unlock screen" by doing it via the samsungdrive website. Now its back to its default setting which is "swype". Thanks all!
i've the same problem!
I've samsung galaxy note 2.. and i'm going through the same thing.. however, samsungdive.com hasn't solved the problem!! i'm really stuck and i want to cancel that lock screen password.. other options are grayed... heeeeelllllpppp
aj_china said:
I've samsung galaxy note 2.. and i'm going through the same thing.. however, samsungdive.com hasn't solved the problem!! i'm really stuck and i want to cancel that lock screen password.. other options are grayed... heeeeelllllpppp
Click to expand...
Click to collapse
Post it in the Note 2 forum.. u may get fast answers..
best98 said:
Hi,
If you go to the samsungdive.com website and register your device, you will be able to reset any activation priorly set with the remote 'unlock screen' feature.
Pierrick
Click to expand...
Click to collapse
Thanks a lot. Using an exchange account locked the screen of a Note 2. This was the solution.
kuplet said:
Thanks for all the replies. Was able to finally reset the "unlock screen" by doing it via the samsungdrive website. Now its back to its default setting which is "swype". Thanks all!
Click to expand...
Click to collapse
Ruud Westerhout said:
Thanks a lot. Using an exchange account locked the screen of a Note 2. This was the solution.
Click to expand...
Click to collapse
I am having the same problem and i am hating this pattern thing everytime to see the home screen.
I will be very glad and very thankful if u can please guide step by step process (a tutorial sort of). Coz i tried but doesnt seem to be doing the trick.
best98 said:
Hi,
If you go to the samsungdive.com website and register your device, you will be able to reset any activation priorly set with the remote 'unlock screen' feature.
Pierrick
Click to expand...
Click to collapse
Thanks a lot. Having the same problem and now solved by following this advice.
SGN2 screen lock option greyed out
aj_china said:
I've samsung galaxy note 2.. and i'm going through the same thing.. however, samsungdive.com hasn't solved the problem!! i'm really stuck and i want to cancel that lock screen password.. other options are grayed... heeeeelllllpppp
Click to expand...
Click to collapse
Same happened to me, not sure whether you've had solved yours.
Anyway, go to Setting<Security<Clear credentials
i know this is an old post, but i faced somewhat of a similar problem. couldnt select any option but pin and password, everything else was greyed out.
go to settings---->security---->clear credentials (at the very bottom)
its caused by some certificate which doesnt let u remove lockscreen. hope it helps.
Phone is completely stock. Is there any utilities to get pass the lock screen password? Can the carrier unlock it or Samsung without wiping it out?
Thanks in advance.
Deca4 said:
Phone is completely stock. Is there any utilities to get pass the lock screen password? Can the carrier unlock it or Samsung without wiping it out?
Thanks in advance.
Click to expand...
Click to collapse
Think I've read somewhere that's it's possible via adb, but you'd need usb debugging to have been previously enabled before you got locked out.
That's all I got as a possibility....
Sent from my SAMSUNG-SM-N900A using Tapatalk
Thanks for the reply. Unless usb debugging is checked by default, I'm 99% sure she did not check it.
Deca4 said:
Phone is completely stock. Is there any utilities to get pass the lock screen password? Can the carrier unlock it or Samsung without wiping it out?
Thanks in advance.
Click to expand...
Click to collapse
I don't see it happening I your case. It's kind of the whole reason behind a lock code. Factory reset is going to be your only hope.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Deca4 said:
Phone is completely stock. Is there any utilities to get pass the lock screen password? Can the carrier unlock it or Samsung without wiping it out?
Thanks in advance.
Click to expand...
Click to collapse
I dont know if things have changed. but before if you kept failing. eventually It would ask you if you forgot your password. Then you would it would email your gmail mail account with a link and instructions to unlock your phone.
a3plew said:
I dont know if things have changed. but before if you kept failing. eventually It would ask you if you forgot your password. Then you would it would email your gmail mail account with a link and instructions to unlock your phone.
Click to expand...
Click to collapse
We've tried so many times and it hasn't prompted us forgot password questions.
I see under the stock recovery you can still side load through adb.
a3plew said:
I dont know if things have changed. but before if you kept failing. eventually It would ask you if you forgot your password. Then you would it would email your gmail mail account with a link and instructions to unlock your phone.
Click to expand...
Click to collapse
I'm not thinking our phones do that.
Sent from my SAMSUNG-SGH-I467 using Tapatalk 4
I thought I would post what I think was the problem in case someone else has the issue. I think it is Gmail verification feature. It maybe possible if you forget your phone password, you can use the Gmail email password to get in as mention on some of the post? AT&T also said she should be able to unlock phone with Gmail password. Details below.
Phone has been reset a few days from posting this. Good thing pictures are syncing with Google Drive.
I believe the problem why the password would not work is because of Google's verify feature on Gmail. For example when you go on to another computer and try to access your gmail, it will ask for a verification code and send you a text with the verification code. I believe this was the problem because once the phone was hard reset, the phone would not accept her Gmail account password. After diagnosing this issue, I decided to try to disable the verification feature on Gmail. Once it was disabled, I was able to get past the Gmail password issue.
To avoid from this happening again I put Androidlost which will allow me unlock the phone remotely. Great App especially being free. My wife doesn't want the phone rooted so this is the best solution for me plus I been using this App since the Galaxy S2 was released and never had an issue with the App. I actually had the app installed before she got locked out but never finish registering the phone, yeah that sucked. Lesson learned the hard way.
Thanks everyone who tried helping.
If u have linked your phone with android device manager you can simply change the password to whatever you want on android device manager on your desktop.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Hey guys,So I just got my Galaxy Gear today and Ive read around and even Samsung's own manual says there is this Safety Assistance where you hit the power button 3 times and it will take a picture with GPS and send it to you emergency contact. The manual says to enable it under settings then safety assistance. But under my settings in gear manager there is no such setting. I contacted Samsung and they can't find where it even says in the manual. Did this feature get removed,or am I just missing something?
Im including the link to Samsung's site and its on PG.35 of the manual.
http://www.samsung.com/levant/consu...ile-phones/galaxy-gear/SM-V7000ZWAAFR-support
Thanks so much for any help!
waternut13134 said:
Hey guys,So I just got my Galaxy Gear today and Ive read around and even Samsung's own manual says there is this Safety Assistance where you hit the power button 3 times and it will take a picture with GPS and send it to you emergency contact. The manual says to enable it under settings then safety assistance. But under my settings in gear manager there is no such setting. I contacted Samsung and they can't find where it even says in the manual. Did this feature get removed,or am I just missing something?
Im including the link to Samsung's site and its on PG.35 of the manual.
http://www.samsung.com/levant/consu...ile-phones/galaxy-gear/SM-V7000ZWAAFR-support
Thanks so much for any help!
Click to expand...
Click to collapse
Did you ever figure out the issue?
Breach said:
Did you ever figure out the issue?
Click to expand...
Click to collapse
I was told that it was pulled last minute. When I insisted they looked at the manual and page number they said that their manual did not show that and there manual was newer so it meant the feature was pulled.
waternut13134 said:
I was told that it was pulled last minute. When I insisted they looked at the manual and page number they said that their manual did not show that and there manual was newer so it meant the feature was pulled.
Click to expand...
Click to collapse
My Gear and my new Gear 2 both have the option. My wife's does not. I think the issue is the rom you are running. My wife's Note 3 is running the stock T-mobile rom and she does not have the opinion. I upgraded to an international rom (to get rid of the t-mobile crap on my phone, most specifically the block they put on the tethering) and a side effect is I now have the Safety Assistance option.
Just figured I would let you know, incase you were interested,
Breach said:
My Gear and my new Gear 2 both have the option. My wife's does not. I think the issue is the rom you are running. My wife's Note 3 is running the stock T-mobile rom and she does not have the opinion. I upgraded to an international rom (to get rid of the t-mobile crap on my phone, most specifically the block they put on the tethering) and a side effect is I now have the Safety Assistance option.
Just figured I would let you know, incase you were interested,
Click to expand...
Click to collapse
Is it possible to obtain the app for that? Like if you open wondershare on a pc, do you see it there? If so back it up, and upload it please.
440bro said:
Is it possible to obtain the app for that? Like if you open wondershare on a pc, do you see it there? If so back it up, and upload it please.
Click to expand...
Click to collapse
The app wouldn't do any good unless you had the option in Gear Manager to turn it off and on, and to set an emergency contact for the app to message.
Perhaps there is a way to inject/mock the version of the rom to allow the option in Gear Manager so the option/ability is enabled.
Hello all,
Just wondering if there is anyway to create a different account base on the fingerprint.
Someone suggested kids mode but it does not work well.
I was wondering If there's an app that can do this. When ever my daughter gets on my phone and she puts in her fingerprint it opens up to her account without giving her access to my work email, apps, or work pictures.
Thank you
bluediablito said:
Hello all,
Just wondering if there is anyway to create a different account base on the fingerprint.
Someone suggested kids mode but it does not work well.
I was wondering If there's an app that can do this. When ever my daughter gets on my phone and she puts in her fingerprint it opens up to her account without giving her access to my work email, apps, or work pictures.
Thank you
Click to expand...
Click to collapse
Never needed that, but what if you create another google account such as guest account?
Charkatak said:
Never needed that, but what if you create another google account such as guest account?
Click to expand...
Click to collapse
Would that allow me to switch between different account upon unlocking the phone ?
bluediablito said:
Would that allow me to switch between different account upon unlocking the phone ?
Click to expand...
Click to collapse
I don't know, but you can try I guess. Have you tried the work mode?