The User Guide says -
"A low battery warning will be displayed when the battery level is low."
But I have never experienced it and the battery level dropped as low as 10%. Does anybody know what it is set to, and how to change it?
I would also like to get warning when the battery is charging and is 90% full. I can't find anything in the Settings or the Power Manager.
I installed the Ampere application and bought the PRO version. But I can't figure out the settings to get the battery Low alert. Can anybody help me with this?
9% you get a notification. You were 1% short. Lol
Sent from my EVA-L19 using XDA-Developers mobile app
Related
Ever since I got the phone I noticed the battery meter was off. The way I see it the bar should represent nearly any % of the total capacity. Well, I don't know if this is the case and I was wondering if anyone else has input. I've been using the phone Status to find the actual % of the battery to actually judge how much juice is left. Often times I'll find the battery reading at 80% or maybe even less and the battery meter shows full. Anyone else having similar problems? Is there a fix or does the bar only show approximate values at certain increments (i.e. 25%, 50%, etc.)?
Same here, when the battery image is at 75% there's realy only 45% left. Kinda annoying but i got used to it
Sent from my GT-I9000M using XDA App
anyone else have input or maybe a possible fix?
bloody awful isnt it lol
i use a widget from extended controls, or switch pro, they have a % and its bang on
else you can try this
http://forum.xda-developers.com/showthread.php?t=765419
im not even going to bother changing the framework-aes.apk as my phone got stuck in a restart loop last time i modded something made by someone else
Dear Android Community,
Overcome-day to all!
I've upgraded to "Overcome-Jupiter" 3 days back and though admittedly the new ROM is smooth and fast I believe am noticing some irregularities on the battery.
I have a question and situation, wherein in battery statistics is is show that "Display" is using around 96% of the batter, all other task including the "Android system which is only 2% is for the remaining 4%.
Furthermore for a full charge, am getting around 14-17 hours usage on the batter.
I've done a "battery wipe" and have done two discharge cycle.
Any other Galaxy tab7 user here having the same issue, your comment, suggestion and recation on my query is greatly appreciated.
Thanks in advance.
Xmen88
Overcome-Jupiter proud-user
As for display that is normal since Froyo especially with heavy use, the beast display consumes the battery more than anything. As for the battery life if its on moderate to heavy use that seems quiet normal even good actually (remember official stock firmware gives you 7hrs on heavy use). Finally read the tips and tweaks section on our website for more info.
I have heavy drain on the battery after upgrading from Hermes to Jupiter. (All apps and setting being similar)
I can get only close to 5 hours of continuous usage compared to about 7 hours on Hermes. You're not the only one to be affected...... I've posted my cries for help :
http://forum.xda-developers.com/showthread.php?t=1176978
I'm still monitoring to see if there's improvement after a few charge cycle.
Darkpal,
Thanks for the quick reply, I have to agree with you on the display thing. What I wanted was actually, just a confirmation from other users that they are having the same battery statics. This will then confirm that everything is normal with my "precious/fragile SGT".
I will do further testing and monitoring.
To PCdumb,
Cheer-up buddy, still I believe our SGT is one of the best tablet out there. ADB and the Overcome team can only do so much nho.
To Darkpal,
On a final note, will the "app lucher" (am using "go launcher EX") will have and effect on battery usage, any launcher you can suggest.
Thanks again for the help
Launchers if coded correctly shouldnt have that much impact if at all on the battery. I personally am using the stock launcher only because am too busy or lazy to configure ADW launcher EX which I have an recommend
DarkPal said:
Launchers if coded correctly shouldnt have that much impact if at all on the battery. I personally am using the stock launcher only because am too busy or lazy to configure ADW launcher EX which I have an recommend
Click to expand...
Click to collapse
Darkpal,
Thanks again friend/sadiq,
Am hearing good review on "ADW launcher", i'll try this and will let you know if there will be any improvement in battery consumption.
Again thanks and best regards;
Xmen88
Overcome-Jupiter Proud-User
battery % weird
Hi. I have a strange question in relation to the topic. I use a P1000 running Gingerbread (stock no mods). I hope you guys have some solution to share to me.
I had Battery Monitor installed so I can check the battery usage and percentages, and Juice Defender Ultimate to you know, save juice.
1. There are few instances that when the unit still has 10% or below power, I sometimes encounter unit shut down (powers off) while I am browsing. So I turn it on again, the Samsung animation appears, but still turns off. Therefore I am forced to charge it (using mains plug). Is that normal?
2. Coming from a critical low battery (5% or lower), with the unit off, I leave it charging (using mains plug) until the battery goes full green (full). 4 hours or so if I am not mistaken. When I turn it on, Battery Monitor displays only 76% or 81% power.
I find that strange since it is supposed to display 100% right?
3. At 76% or 81% while unit on, I plug it to charge again, but does not increase percent anymore.
4. Upon my gut assessment, the unit still performs normally, the standby time and usage time are still as expected, the battery is working fine.
TO DO:
I am thinking to just clear data and reinstall battery monitor.
I am also thinking to install another battery application to display percentage for comparison.
In any case, is there a way to calibrate the unit when turned on to display 100% when it is really full when charged off?
I am not modding or rooting it, I am just a basic user. Any ideas? Thanks!
jtdc said:
Hi. I have a strange question in relation to the topic. I use a P1000 running Gingerbread (stock no mods). I hope you guys have some solution to share to me.
I had Battery Monitor installed so I can check the battery usage and percentages, and Juice Defender Ultimate to you know, save juice.
1. There are few instances that when the unit still has 10% or below power, I sometimes encounter unit shut down (powers off) while I am browsing. So I turn it on again, the Samsung animation appears, but still turns off. Therefore I am forced to charge it (using mains plug). Is that normal?
2. Coming from a critical low battery (5% or lower), with the unit off, I leave it charging (using mains plug) until the battery goes full green (full). 4 hours or so if I am not mistaken. When I turn it on, Battery Monitor displays only 76% or 81% power.
I find that strange since it is supposed to display 100% right?
3. At 76% or 81% while unit on, I plug it to charge again, but does not increase percent anymore.
4. Upon my gut assessment, the unit still performs normally, the standby time and usage time are still as expected, the battery is working fine.
TO DO:
I am thinking to just clear data and reinstall battery monitor.
I am also thinking to install another battery application to display percentage for comparison.
In any case, is there a way to calibrate the unit when turned on to display 100% when it is really full when charged off?
I am not modding or rooting it, I am just a basic user. Any ideas? Thanks!
Click to expand...
Click to collapse
Try to reflash or factory reset then monitor the battery without installing the battery monitor.
I use "battery doctor to save battery" from the market. You can try that but try first without a battery monitor app.
did you try to use another usb cable? or perhaps your charger is not the original? loose internal battery connector? there are so many factors that might cause your problem not mentioned.
bongski55 said:
Try to reflash or factory reset then monitor the battery without installing the battery monitor.
I use "battery doctor to save battery" from the market. You can try that but try first without a battery monitor app.
did you try to use another usb cable? or perhaps your charger is not the original? loose internal battery connector? there are so many factors that might cause your problem not mentioned.
Click to expand...
Click to collapse
Thank you for the reply bongski. Without any battery monitor app, the problem is I cannot see percentages. But anyway I will do the factory reset, it is another option but I find that drastic and will be the last choice. Also, the USB cable and the charger is the one that came with the Samsung box so they're original. The loose internal battery connector is a bit far fetched, the battery is not user accessible and also the unit is not dropped and carefully handled.
Hopefully I get accurate readings, I will update here.
The battery percentage is in settings/about device/status/battery level.
Sent from my GT-P1000 using Tapatalk
bongski55 said:
The battery percentage is in settings/about device/status/battery level.
Click to expand...
Click to collapse
ok. well i did the following
1. clear data and reinstall battery monitor.
2. install another battery application to display percentage for comparison.
i tried the battery doctor but provided the same percentage reading.
so i just factory reset the thing, and i am observing now (ie. charge later and see if the issue persist). i've no knowledge on how to reflash the thing.
well ok to clear all my doubts i just factory reset it. then i reinstalled my initial apps (including battery monitor), used it til it died (1% until it off itself). plugged to mains, turned it on, and let it charge while ON (of course screen is off). took 174 minutes (3 hours) when it reached 99% and stayed 99% (looks like it does not touch 100%) 4176mV. after 5 mins of non use, it still remains 99% but at 4012mV. with the 1% missing, i guess i can let that go and dismiss as normal now... although i read related thread
http://forum.xda-developers.com/showthread.php?t=866011
and some resetting technique here
http://forum.xda-developers.com/showthread.php?t=921848
but anyway my simple mind would just like to say, "ok its displaying normalcy now".
now i did not figure what caused the tab to display erratic behavior before this, but once i got it i will update again.
The last couple of days I've got a weird problem. When my battery is fully charged everything seems okay and it drains in normal speed (compared to stock).
But when my phone runs out off battery and i start to charge in the beginning everything seems fine.
But suddenly it can go from 75 to 100% in 1 minute.When i look at the stats in MIUI ROM it seems like it's not at same height as it was the last day of 100%. Maybe only 80%.
Sorry for my bad English, but i hope it makes sense.
I've wiped battery stats in CWM. But is it possible that the phone actually is only 80% charged, even though the indicator shows 100% after wipe?
Because if the ROM think the battery is charged and wipe stats it will afterwards only charge to that point and the battery maximum will decrease over days?
If that's possible, how do i full charge the battery? Just leave it in the charger or?
I hope you can understand what I mean.
Thanks in advance
Hello
Does your phone charge to fx 75% and after that doesnt get higher until after you restart the phone?
Sent from my LG-P990 using XDA App
CescMusta said:
Hello
Does your phone charge to fx 75% and after that doesnt get higher until after you restart the phone?
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
Yes excactly. But the numbers differs.
Today it charged to 100% though.
Got the same problem?
Sent from my Optimus 2X using XDA App
have you try calibrate your batt again
yes my friend have this problem too, maybe there is software bug
After flashing Celebration HD 2.0.1b I first used Battery Calibration from market to wipe battery stats. Afterwards the battery indicator problems started.
Yesterday i decided to wipe battery stats manually in CWM and drain to phone to 2% before charging, and afterwards I was able to fully charge the phone.
So maybe the bug in is Battery Calibration app?
I decided to install Juice Plotter to monitor the battery and compare it to one build in in MIUI. Just to get some more data.
Hello again
Yes i had the same problem as you, with my previosly 2 lg optimus 2x, and returned them because of the problem you mentioned. I am on the third op2x and luckily this work good
So if i were in your position i would try to go to the dealer and shift the phone with another lg optimus 2x.
Best regards
Sent from my LG-P990 using XDA App
CescMusta said:
So if i were in your position i would try to go to the dealer and shift the phone with another lg optimus 2x.
Click to expand...
Click to collapse
The user said that he started to have problem after a new rom and wiping battery stats, changing phone for that is not the smartest move at all. Is like changing phone because your rom doesn't work.
I have a similar problem, after you wipe battery stats you don't have a reliable indicator, for me the phone took 3 hours to get from 99 to 100%.
I also noticed that my miui ( 1.8.5 same for 1.7.29) doesn't update battery stats when the screen is off so all those plotter don't work, and i think this messes up with the battery indicator (I guess the phone doesn't have enough data to make a decent estimate)
I think is miui + wipe battery stats that can be problematic
I know that but i am just saying that i also had the same problem with the stock rom.
Best regards
Sent from my LG-P990 using XDA App
How old is the battery? How many cycles does it have?
I know from laptop Li-Ion batteries that the voltage vs. capacity is not linear.
When discharging, the voltage will steadily drop to a "wear-level" where it will jump to an almost depleted level. When charging, this "wear-level" will be at the top.
Why I am telling this? Because if this mapping is kept in SW and you wiped it, Android needs to relearn it again. So at 1st complete charging/discharging you would see a % sudden drop/raise, but at the next cycles it would be linear with time (although the total time will be smaller than a new battery).
When laptop/phone battery tips talk about calibration, it is so whoever monitors the voltage (circuit in battery or SW) to know were the wear drop will be, so your estimates to be better.
As an example, I had a very old Thinkpad that did not have any calibration, and it would discharge to about 40% and drop to 5% within seconds. But when charging, it would raise steadily to 70% (from that 5%) but 70% to 95% in seconds. After years of use, that percentage gap would just increase (40-5 got 60-5, 70-5 on discharging).
PS: my current Thinkpad has 4 years and the battery capacity is 49% with 150 cycles. But this one has a nice feature where if the battery was above a certain percentage, plugging AC would not charge it (and thus save a few cycles). I used it set at 70%.
PS: LiIon batteries have cycle count, heat and time as main enemies. Also don't like prolonged (think storage) low charge.
battery on wallcharger screen of error
CenaDK said:
The last couple of days I've got a weird problem. When my battery is fully charged everything seems okay and it drains in normal speed (compared to stock).
But when my phone runs out off battery and i start to charge in the beginning everything seems fine.
But suddenly it can go from 75 to 100% in 1 minute.When i look at the stats in MIUI ROM it seems like it's not at same height as it was the last day of 100%. Maybe only 80%.
Sorry for my bad English, but i hope it makes sense.
I've wiped battery stats in CWM. But is it possible that the phone actually is only 80% charged, even though the indicator shows 100% after wipe?
Because if the ROM think the battery is charged and wipe stats it will afterwards only charge to that point and the battery maximum will decrease over days?
If that's possible, how do i full charge the battery? Just leave it in the charger or?
I hope you can understand what I mean.
Thanks in advance
Click to expand...
Click to collapse
I have when i turn off my fhone and i charge it it shows a battery icon whit an error in it ics lgp990 please help i dont no what tho do
I'm Currently On Apocalypse Rom. I'm having Battery percentage issue.
I Charged 1Minute it can direct boost up to 100% Which mean it show Charged but when i plug off - the battery percentage drop directly. Anyway to fix this?
even i charged for 1 night, the battery can last only like 8hours.
The battery is new :O
i need real battery percentage =X
Search the market/ play for an app called "battery full notification"
It's light weight and non-invasive and will tell you when your battery its actually charged (your phone normally will say 100% long before it has competed it's charge. The only other way to tell if it has completely charged that i know of is to go to settings> about phone> status. The app has many options to let you know without disturbing you. Check it out.
Also, when you install a new ROM, do it with a full battery. You can help by calibrating your battery with an app or:
When your phone runs out of battery and dies, boot to recovery and wipe battery stats in the advanced menu of cwm. If you don't have enough charge to do this charge for a few seconds then boot to recovery.
Charge your phone until full and that's it.
Your battery on your ace is not great and if you use your phone as much as I do, 8 hours isn't bad!
I use my phone LOTS!
I have Z3 Play for few days now and I was thinking it's great that it has battery mod included. I see it's working in quite stupid way. In efficiency mode it keeps battery at 80% but not in a way of using battery mod for powering phone, but charging phone very often when its charge drops little bit. I think that is good way to kill internal battery.
Other option is just turning on to charge internal battery when it gets low, but that is also not a way to prolong internals battery life. Battery mod seems totally useless for me.
So I'm wondering is there any way to change how battery mod delivers it's power to the phone?
vlaga said:
I have Z3 Play for few days now and I was thinking it's great that it has battery mod included. I see it's working in quite stupid way. In efficiency mode it keeps battery at 80% but not in a way of using battery mod for powering phone, but charging phone very often when its charge drops little bit. I think that is good way to kill internal battery.
Other option is just turning on to charge internal battery when it gets low, but that is also not a way to prolong internals battery life. Battery mod seems totally useless for me.
So I'm wondering is there any way to change how battery mod delivers it's power to the phone?
Click to expand...
Click to collapse
The only way I knew it from Oreo that you can force the battery mood to stop charging and activate it again upon your need.
Sent from my [device_name] using XDA-Developers Legacy app