[PORT] S7 BootAnimation
How To İnstallation
This port For Stock 4.2.2 Jb Roms.
-Download Attach Files
-Flash via Cwm&Twrp&PhilzTouch Recovery
-Reboot System Now
-Enjoy
-Hit Thank Button :highfive:
OK
4.2.2 stock ROM only works phliz precise touch recovery solution..
Good
Did you try?
Not working
What should you use ROM?
Stock rom 4.2.2
Stock rom 4.1.1
Stock rom 4.0.4
Not working with any recovery no cwm no touchphils and no twrp.
None of them worked.. I have backup of every rom from ics to a variety of MM.
Did you try it yourself? If so then show us how does it look
I 'm using 4.2.2 stock ROM you use it to bite my recovery mode trying philztouch certain that each mode 4.2.2 ...
Related
Hi everyone.
I am on this:
Android version: 2.3.6
Baseband version: N7000XXLB2
Kernel version:[email protected] #2
Build number: CheckROM NoteHD V6
I don't know why but sometimes I (Vol Up+Home+Power) and is CWM 6 and sometimes CWM 5
I bought the phone a month ago it came with a 4.0 version (good one), I searched in here best ROMs (CheckROM came across) download it and now I have 2.3.6 version.
I have downloaded 4 different kinds of JB version from across the forums and none of them have work....
I am thinking I download from here http://forum.xda-developers.com/showthread.php?t=1901191 the wrong Kernel version... I download XXLSC-XJB (JB Leak) I don't know if I have to use this XXLSA-XJB (JB Leak), or XXLS7-XJB (JB Leak), or any other I just download the first one.
Can anybody help me on how to instal the JB version of Android with CWM...
Thanks
:laugh:
are you just installing JB kernels on a GB rom? The phone wont even bootup
You need to install JB rom for a JB kernel to work.
there are a lot of JB roms in the Android Development section. Download and install using CWM. Read the procedure in the ROM thread.
melvinelelefante2000 said:
Hi everyone.
I am on this:
Android version: 2.3.6
Baseband version: N7000XXLB2
Kernel version:[email protected] #2
Build number: CheckROM NoteHD V6
I don't know why but sometimes I (Vol Up+Home+Power) and is CWM 6 and sometimes CWM 5
I bought the phone a month ago it came with a 4.0 version (good one), I searched in here best ROMs (CheckROM came across) download it and now I have 2.3.6 version.
I have downloaded 4 different kinds of JB version from across the forums and none of them have work....
I am thinking I download from here http://forum.xda-developers.com/showthread.php?t=1901191 the wrong Kernel version... I download XXLSC-XJB (JB Leak) I don't know if I have to use this XXLSA-XJB (JB Leak), or XXLS7-XJB (JB Leak), or any other I just download the first one.
Can anybody help me on how to instal the JB version of Android with CWM...
Thanks
:laugh:
Click to expand...
Click to collapse
Flash PhilZ kernel (Philz Safe Kernel 3.73 for XXLSC )
http://forum.xda-developers.com/showthread.php?t=1901191
Reboot recovery in to PhilZ kernel then you can make a full wipe and flash the JB of your choice. I recommend Ultimate Rom.
http://forum.xda-developers.com/showthread.php?t=1970626
Cassie's xtraLIite v11.1 AROMA and v6 supercharger scripts and way you go + lots more but that will came for u whenu want...
Flash kernel,rebot into recovery,wipe all,flash rom,reboot (might be good to fix premission in advance)
You can search for ultimate jb rom. Also you need to install hydracore kernel. I was able to install it and it works like a charm.
Sent from my GT-N7000 using Tapatalk 2
First I would recommend flashing an official Samsung ICS ROM with Odin. Then flash a safe kernel with CWM (ex. Speedmod or Hydracore), also through Odin or Mobile Odin. Once with a safe kernel, reboot into recovery, wipe everything using my guide below, then flash the JB ROM of your choice (put it in your external SD card before). I recommend Ultimate JB XXLSC.
http://forum.xda-developers.com/showthread.php?t=2024481
Will it brick if i install ICS custom rom (RocketROM ICS v12) and at the moment i use JB custom rom (Slim ROM 4.2 OFFICIAL) ?
The phone is rooted of course
Thx
lakir said:
Will it brick if i install ICS custom rom (RocketROM ICS v12) and at the moment i use JB custom rom (Slim ROM 4.2 OFFICIAL) ?
The phone is rooted of course
Thx
Click to expand...
Click to collapse
As long as you are running a safe kernel you won't have issues. Make sure that you are in a safe kernel and do a clean install (full wipe)
That is the usual method, but also make sure that you read the rom download instructions just to make sure that you follow the correct instructions. Take into consieration that some AOSP roms fail when flashed from TW based CWM, so you need to flash an CM based kernel first..:good:
:good:
How can I know if I run a safe kernel?
which kernel do I exactly need for RocketROM ICS?
RR v12 runs on Notecore which is a safe kernel unless you have applied a different one
Hey guys,
I don't know the answer for sure and although I have a twrp backup I still want to avoid having un-necessary problems.. If I'm using right now ARHD 51, android 4.4.2, BulletProof 4.4.2 kernel and Twrp 2.6.3 and I wanna go for MIUI V5 which is android 4.2.2. Miui requires TWRP 2.6.0 or something like that to work, what are the stages that I have to do now?
I come from the Galaxy S I9000 and there I had to flash first stock or stock based 4.2.2 rom before flashing miui because of the different android versions and I want to know if its the same here? Can I just flash the twrp, 4.2.2 kernel and wipe and flash the miui rom? Or do I have to install some stock 4.2.2 rom first?
Thanks!
opher50 said:
Hey guys,
I don't know the answer for sure and although I have a twrp backup I still want to avoid having un-necessary problems.. If I'm using right now ARHD 51, android 4.4.2, BulletProof 4.4.2 kernel and Twrp 2.6.3 and I wanna go for MIUI V5 which is android 4.2.2. Miui requires TWRP 2.6.0 or something like that to work, what are the stages that I have to do now?
I come from the Galaxy S I9000 and there I had to flash first stock or stock based 4.2.2 rom before flashing miui because of the different android versions and I want to know if its the same here? Can I just flash the twrp, 4.2.2 kernel and wipe and flash the miui rom? Or do I have to install some stock 4.2.2 rom first?
Thanks!
Click to expand...
Click to collapse
make sure to take backup before doing all this
you can try to flash MIUI v5 with TWRP 2.6.3.3, i think it will work
if not use TWRP 2.6.3.0
I would like to change the ROM in my Xperia T from CM11 (based on 4.4 KK) to Omega ROM (based on 4.3 JB). How could I install this ROM ? Are the any tutorial to downgrade from 4.4 to 4.3 for Xperia T ?. Also the CWM I have is V6 and I have checked that this ROM requires the CWM V7 or V8 to do installation. Where could I get it ? Thanks in advance.
Hi, first you should flash latest 4.3 firmware via flashtool, it can be found here
http://forum.xda-developers.com/showthread.php?t=2648320
Then just root and install recovery from there
http://forum.xda-developers.com/showthread.php?t=2798411
And you are ready to flash Omega rom with that recovery.
Thanks
Thanks you. It works
[PORT] S5 2016 AccuWeather
How To İnstallation-Download Attach Files
-Flash via Cwm&Twrp&PhilzTouch Recovery
-Reboot System Now
-Enjoy
-Hit Thank Button :highfive:
Very nice, good job
THANKYOU
Hi, does it work on custom roms ?
ZikoKiko said:
Hi, does it work on custom roms ?
Click to expand...
Click to collapse
Yeah Only 4.2.2 TouchWiz Stock And Stock Base Roms.