Related
Hi All, i have a several problem with my phone.
I tried to install cyanogenmod, with no results. The problem becomes when i tried to go back to the previous android (the original).
I tried a lot of times change it, but now i can't do anything because the phone restart automatically just turn on, and because that, i can't connect the phone to my computer via usb (the time between a restart and another is about 5 five seconds).
Other thing that i like to refer is that the phone can't start in download mode (i can do that before, via odin, but now that solution doesnt works since the last android change version that i do).
I hope that one of you can help me please, i don't know what i can do.
PD: sorry if my english is bad, i'm a spanish-speaking
gbenussi said:
Hi All, i have a several problem with my phone.
I tried to install cyanogenmod, with no results. The problem becomes when i tried to go back to the previous android (the original).
I tried a lot of times change it, but now i can't do anything because the phone restart automatically just turn on, and because that, i can't connect the phone to my computer via usb (the time between a restart and another is about 5 five seconds).
Other thing that i like to refer is that the phone can't start in download mode (i can do that before, via odin, but now that solution doesnt works since the last android change version that i do).
I hope that one of you can help me please, i don't know what i can do.
PD: sorry if my english is bad, i'm a spanish-speaking
Click to expand...
Click to collapse
Power down, Pull out Battery, Pull out Sim Card and Ext. SD card, press power button for a Minute than power up again to try the combo buttons again...
1) To enter download mode [volumedown+home+power] or as per your model
2) While in this position, insert the battery
3) conect phone to your pc
4) follow normal flash step by odin
hope this will help.
or visit this link http://forum.xda-developers.com/showthread.php?t=1841250 from xsenman
Samtan4326 said:
Power down, Pull out Battery, Pull out Sim Card and Ext. SD card, press power button for a Minute than power up again to try the combo buttons again...
1) To enter download mode [volumedown+home+power] or as per your model
2) While in this position, insert the battery
3) conect phone to your pc
4) follow normal flash step by odin
hope this will help.
or visit this link http://forum.xda-developers.com/showthread.php?t=1841250 from xsenman
Click to expand...
Click to collapse
Thanks for the immediate answer!
I try what you say, but don't work
Maybe i dont understand good, do you say that i have to remove all (including the battery) and then press power button literally for a minute (without the battery) and then try to put the phone in download mode?
I have to say that my phone is unable to enter in download mode from factory (i can access to download mode with a modification with odin, but now i can't do that).
Neither can connect my phone to the pc, because restarts in less than 5 seconds and the pc is unable to detect it in so little time.
Again, thanks for the help
gbenussi said:
Thanks for the immediate answer!
I try what you say, but don't work
Maybe i dont understand good, do you say that i have to remove all (including the battery) and then press power button literally for a minute (without the battery) and then try to put the phone in download mode?
I have to say that my phone is unable to enter in download mode from factory (i can access to download mode with a modification with odin, but now i can't do that).
Neither can connect my phone to the pc, because restarts in less than 5 seconds and the pc is unable to detect it in so little time.
Again, thanks for the help
Click to expand...
Click to collapse
press download combo 1st folow by put in battery. BTW do you able to boot to recorvery mode? if yes, Wipe the cache partition,Go to Advanced and wipe the dalvik. and reboot to normal.
Samtan4326 said:
press download combo 1st folow by put in battery. BTW do you able to boot to recorvery mode? if yes, Wipe the cache partition,Go to Advanced and wipe the dalvik. and reboot to normal.
Click to expand...
Click to collapse
Thanks again, i tried that, but still with no work, the phone turns on, show the galaxy s logo, and then, reboot.
The only different thing that i can do is start up in the "Forced upload" mode, pressing volume up + home, then press power button until turn on, then release the poer button.
Thanks for the answer i'm grateful
gbenussi said:
Thanks again, i tried that, but still with no work, the phone turns on, show the galaxy s logo, and then, reboot.
The only different thing that i can do is start up in the "Forced upload" mode, pressing volume up + home, then press power button until turn on, then release the poer button.
Thanks for the answer i'm grateful
Click to expand...
Click to collapse
do you have office firmware for your i9000 e.g xxjvu, if yes you can try this,
1- launch Odin
2- Put your phone into FORCED UPLOAD by KEY PRESSING
3- Connect the USB cable to your phone (Odin3 should display "Added!!")
4- Select your file PIT, PDA, PHONE and CSC then click on START
5- Your Odin will stop on "SetupConnection.." Press Volume down + Home + Power and KEEP HOLDING IT UNTIL YOU SEE the DOWNLOAD MODE
Samtan4326 said:
do you have office firmware for your i9000 e.g xxjvu, if yes you can try this,
1- launch Odin
2- Put your phone into FORCED UPLOAD by KEY PRESSING
3- Connect the USB cable to your phone (Odin3 should display "Added!!")
4- Select your file PIT, PDA, PHONE and CSC then click on START
5- Your Odin will stop on "SetupConnection.." Press Volume down + Home + Power and KEEP HOLDING IT UNTIL YOU SEE the DOWNLOAD MODE
Click to expand...
Click to collapse
mmm, odin doesn't recognizes my phone, i try install the drivers again and again but nothing :/
gbenussi said:
mmm, odin doesn't recognizes my phone, i try install the drivers again and again but nothing :/
Click to expand...
Click to collapse
so now you able to boot to download mode? is yes try tho get the drives from this link http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 from xsenman
Samtan4326 said:
so now you able to boot to download mode? is yes try tho get the drives from this link http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 from xsenman
Click to expand...
Click to collapse
No, the phone still show the glaxy s logo when turn on, and then reboot automatically in less that 5 seconds.
Do you know if the jig method ever works?
thanks
gbenussi said:
No, the phone still show the glaxy s logo when turn on, and then reboot automatically in less that 5 seconds.
Do you know if the jig method ever works?
thanks
Click to expand...
Click to collapse
if you wan to use the usbjig method you may try to make one for you self, http://forum.xda-developers.com/showthread.php?t=1604707
or there may be a forum member in your area that’ll let you borrow their jig for a one-time use http://forum.xda-developers.com/showthread.php?t=1891197
BTW from FORCED UPLOAD mode use the method i told you, do you able to boot to download mode? if yes from download mode you can use odin to flash. hope this will help .
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
Are you on EMUI 5 (Android Nougat) ? If so, official TWRP is not compatible with version > EMUI 4.x for now.
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
ClementNerma said:
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
Click to expand...
Click to collapse
you need install original recovery and extract update.app from B100 firmware, then you place it to "dload" folder in your sd card and flash using 3 buttons. you cant full brick by messing with root. only soft brick which is fixable.
Ok I'll try it. I will post again if something comes wrong.
Thanks a lot for your help
I forgot to ask about one thing : I'm owning a phone with NEM-L51 model and I don't know if I can use NEM-L22 firmware ? If I can't, where can I find the right files to downgrade this specific model ? All the firmware files I see on the web are for the NEM-L22...
EDIT : I've found the B102 firmware for NEM-L51 model (Europe + UK) can I take it for the downgrade or is the B100 specific version needed ?
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
gopinaidu77 said:
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
Click to expand...
Click to collapse
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears. This is really strange, when I see videos I find on YouTube all Honor 5C owners that just do what you say enter in recovery mode, but it's not my case... I really wonder why.
I don't know if that can help you to understand, but I'm using a french Honor 5C phone, with EMUI 5.0 / Android Nougat like I said previously, model is NEM-L51 and I did the Android Nougat update several days ago using the Honor's official update application, which is natively installed on the phone.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
ClementNerma said:
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
Click to expand...
Click to collapse
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
gopinaidu77 said:
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
Click to expand...
Click to collapse
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video of when I boot my phone in normal mode / recovery mode / erecovery mode ?
ClementNerma said:
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video ?
Click to expand...
Click to collapse
No i understood
gopinaidu77 said:
No i understood
Click to expand...
Click to collapse
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
EDIT : I forgot to precise the long model name of my phone : NEM-L51C432B350. On Firmware Finder Rewrite it shows that there are only two update packages for it, published on 20.04.2017... So I wonder if I need to download the three files shown in the filelist of the big update (1.68 Gb) and install them on the device ?
ClementNerma said:
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
Click to expand...
Click to collapse
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
gopinaidu77 said:
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
Click to expand...
Click to collapse
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
ClementNerma said:
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
Click to expand...
Click to collapse
Yes that's fine.
gopinaidu77 said:
Yes that's fine.
Click to expand...
Click to collapse
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
ClementNerma said:
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
Click to expand...
Click to collapse
Long click of power button will shut down the phone. Why u always refer about usb cable . Follow all instructions unplugged
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
gopinaidu77 said:
Long click of power button will shut down the phone.
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
Click to expand...
Click to collapse
Nope, long click of power button will just reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
ClementNerma said:
Nope, long click of power button will hust reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
Click to expand...
Click to collapse
Yes , the same happend for me ! U can unbrick bro
gopinaidu77 said:
Yes , the same happend for me ! U can unbrick bro
Click to expand...
Click to collapse
But how can I unbrick the phone ? I can't enter in any mode, I can't connect it to PC, I can't shutdown the phone, I can't use ADB or FastBoot on it, I can't reflash the bootloader or install a TWRP, downgrade or boot normally, I can't do anything !
So how could I unbrick it ? For now it's just still displaying "Your device is booting now..."
If you know how to do, please tell me so I can unbrick my phone. Sorry for asking you so many things I don't understand myself why there are so many problems...
Good morning people,
Hope you are well!
I updated my Mi A2 via OTA to PIE, it was in Bootloop, I got MiFlash back to OREO (V9.6.16.0), and I tried to install PIE, now for Fastboot MiFlash , but my cell phone was again in Bootloop.
Does anybody know how to solve this?
Or what happened to someone else?
Thanks for the help!
Claim warranty by far the most easy solution.
And yeah more people have this isseu.
had same problem... twice but solved very easy
just boot to recovery boot (volume down ad power)... connect power and left 10-15 minutes...
dont disconnect phone from power and press and hold power until reboot, release power button and voila, phone normally boot!!!!
i notice if you not wait long enough in recovery boot, phone remain in bootloop... just be patient and maybe helps... works for me twice...
dxdy said:
had same problem... twice but solved very easy
just boot to recovery boot (volume down ad power)... connect power and left 10-15 minutes...
dont disconnect phone from power and press and hold power until reboot, release power button and voila, phone normally boot!!!!
i notice if you not wait long enough in recovery boot, phone remain in bootloop... just be patient and maybe helps... works for me twice...
Click to expand...
Click to collapse
But when I do this, it goes into Fastboot mode (power and volume minus).
Are you talking about going into recovery mode?
ewertombarbosa said:
But when I do this, it goes into Fastboot mode (power and volume minus).
Are you talking about going into recovery mode?
Click to expand...
Click to collapse
just enter in fastboot mode and do nothing... only connect to power charger
is weird because i had two times this problem.. once after android 9 upgrade week ago, and second time today after factory reset
every times i cant do anything to work... this with power charger was stupid idea but is worked.... just connect charger in fastboot mode, wait 10-15 minutes and restart phone with power button... both times this worked for me...
i remember few years ago similar problem with Nokia/MS windows phones batteries and similar steps helped...
After instal january update and restart, on the phone see Android One logo and nothing is happening. After 5 minutes it switches off.
I'll get to the bootloader, but I can not unlock the bootloader (neither unlock critical). Is anyone able to help?
Use official xiaomi "MI FLASH TOOL" on Windows and flash with full stock image named "fastboot rom"
(Download image here: https://xiaomifirmware.com/roms/latest-android-roms-for-xiaomi-mi-a2/)
(You have to extract on Windows this tar.gz and tar also, and then flash with Xiaomi tool)
If you need help with this tool, read this "mi flash tool" tutorial:
https://www.themefoxx.com/2018/07/xiaomi-mi-flash-tool.html
My device went int bootloop suddenly while I was using it. I not able to get in fastboot (when I press Power + Down it shows fastboot window for a sec and reboots again ) or recovery mode(When I press Power + Up, Screen shows up saying no command).
I was using official build(July patch). I have not enabled ADB. My bootloader is also locked.
Is it possible to get this device working?
Any help will be appreciated.
dha72 said:
My device went int bootloop suddenly while I was using it. I not able to get in fastboot (when I press Power + Down it shows fastboot window for a sec and reboots again ) or recovery mode(When I press Power + Up, Screen shows up saying no command).
I was using official build(July patch). I have not enabled ADB. My bootloader is also locked.
Is it possible to get this device working?
Any help will be appreciated.
Click to expand...
Click to collapse
search for a video tut on youtube on testpoint
dha72 said:
...or recovery mode(When I press Power + Up, Screen shows up saying no command)....
Click to expand...
Click to collapse
This is normal behavior of stock recovery: seeing "no command" hold "power" and click "Vol+", - to get to the stock recovery menu (btw, search would 100% give you this tip even in these forums).
As you are locked, and thus you have surely lost user data, you can try to make factory reset from recovery menu.
Yet I'd try to connect phone to power and make numerous attempts to reboot, occasionally rebooting into fastboot and into recovery, - with the hope that phone will switch into the other A/B slot.
If nothing helps, TestPoint/EDL is the only option except service.
But again, the problem may be hardware issue, and as you are supposed to disassemble phone preforming TestPoint, I'd check connectors inside and tried to reboot again before reflashing in MiFlash. And do not forget to reflash in fastboot after MiFlash reflash (and unlock phone - which I did immediately after purchase).
I installed latest MIUI On my Redmi 9prime (lancelot), after I am trying to boot in fastboot mode my phone only vibrate with black screen and boot up normally.
What I try
1. Try to boot using volume down + power button not worked
2. Try using adb command not worked.
3. Downgrade miui to 12.0.2 still not worked.
Pls help me I can't access my fastboot mode only long vibration and black screen then phone boot up normally
volume up+ volume down + power button
How long to hold button luckyly I tried after ur reply and it works but now the menu is not opening pls tell me exact process I little dumb here
Thanks bro it's work
Is any way to unlock bootloader without waiting???????
Power off your device
Hold volume up+down + power button for 10-15 seconds
You will get 3 options
Recovery
Fastboot
Normal
Use your power up button to navigate and select fastboot
That's it I guess
akash1337 said:
Power off your device
Hold volume up+down + power button for 10-15 seconds
You will get 3 options
Recovery
Fastboot
Normal
Use your power up button to navigate and select fastboot
That's it I guess
Click to expand...
Click to collapse
Is worked for me bro, any way to unlock bootloader without waiting or what is process to unlock bootloader?
UGdev said:
Thanks bro it's work
Is any way to unlock bootloader without waiting???????
Click to expand...
Click to collapse
Even I got my hands on this device today afternoon
My mom was complaining about lag issues with memeui 12.5
So I decided to unlock the device.
I guess there's no way to bypass 168 hours wait time to unlock the bootloader
akash1337 said:
No
Even I got my hands on this device today afternoon
My mom was complaining about lag issues with memeui 12.5
So I decided to unlock the device
Click to expand...
Click to collapse
Process as I know is download mi unlock tool on pc and in ur phone u have to enable oem unlocking in dev options and enable mi unlock stetus
On pc run mi unlock tool and sign in using ur mi id and unlock option will appear but for me it can't work or some time it shows wait for 166 hrs frustrated