Database Develop

Couple of (I Hope) Easy Tilt Questions

I had an 8125 and now I have a tilt. In making the switch I have run into a few anooying problems that I am sure someone already solved? I have looked all over the forums so if these are answered, could you please point me in the right direction?
1) The ever popular PTT issue. Took me a while but I got it going. It was interesting that there was an incompatibility between the fix and BatteryStatus. Not sure what THAT was about? But it is working now.
Soooo...How do I get button FIVE to appear on my button maps? Neither the stock button feature in the settings nor AEButton Plus shows button 5, the camera button. It would also be kewl to map the OK button on the side, but I am guessing that is too much to ask? *Blink*
2) I have set the brightness at about the medium level (that was a disappointment because I was able to set it to the lowest on the 8125) but somehow the backlight keeps going dim after a time. I have looked all over the parameters to configure this but I can't find it? How do I keep the display from going dim on me? I have the tilt set to sleep at 1 minute and I do not have the backlight going dim at all, so I don't know what else to do?
3) Now that PTT button is mapped, I did what all of you did, I set it to Voice Command. But of course the push and hold I want the convenience of RECORD like I had on the 8125. I have tried all of the shortcuts and such I could find on this site and everyone of them put the voice recorder on my screen but did NOT initiate the record feature. Is there no way to do this on the tilt? I think I remember something about a parameter? /b or something like that? I tried to find it again but I was unable to.
Thanks for your help, guys...
Thomas <><
http://www.thomasamckean.com
Colonel, HOKC
Author, Soon Will Come the Light: A View From Inside the Autism Puzzle
Author, Light On the Horizon: A Deeper View From Inside the Autism Puzzle

ThomasMcKean said:
I had an 8125 and now I have a tilt. In making the switch I have run into a few anooying problems that I am sure someone already solved? I have looked all over the forums so if these are answered, could you please point me in the right direction?
2) I have set the brightness at about the medium level (that was a disappointment because I was able to set it to the lowest on the 8125) but somehow the backlight keeps going dim after a time. I have looked all over the parameters to configure this but I can't find it? How do I keep the display from going dim on me? I have the tilt set to sleep at 1 minute and I do not have the backlight going dim at all, so I don't know what else to do?
Click to expand...
Click to collapse
Hi Welcome
Not sure bout your other two questions, but the backlight is easy
Look in Start/Settings/System/ Backlight
You want the second tab, which is for Battery Power.
There you can set the timeout for it.
PS: If you have already tried this, then sorry for pointing it out, but sometimes the obvious solution is hard to find

AEButton Plus
I am able to remap both the OK button on the side and the Camera button with AEButton PLus.
I do have a slight problem that I am looking for a solution and hope someone knows the answer. When I remapped the OK button on the side, the first press still gives me the start menu no matter what I have it set for. The second press does the function I have programmed for double press. But is there anyway to not have it give me the start menu on the first press? I have it as none in the standard WM6 buttons panel. And I have it as lock phone on AEButtonPlus for both the first press and double press. But it always requires double press to make it happen. Any ideas?
-- Charley

BackLight brightness adjust command line utility for Kaiser aka TYTN II

I dunno if I'm only one who has this problem but when I'm occasionally on sun I can't see nothing on my Kaiser and it's really difficult to setup backlight brightness on touchscreen which u can't see.... So I've been looking alot if there is some utility which I can link with button or gesture and I haven't found anything... So I've wrote my own utility. Feel free to use it as well if u find it useful -> http://lobster.ic.cz/?page=bl
is this useful or is there easier way to do that??

Been searching for an app like this for a week.
Works great!
Thanks.

Here's another program that gives you a today plug in for it:
http://forum.xda-developers.com/showthread.php?t=412896
I'll b trying yours tho as I like the idea of UL with icons for up and down
Cheers,
Matthew

I made a cab with this program mapped to the PTT button. I have a AT&T Tilt, Im not sure if your phone has a PTT button or if its called something else or whatever.
With this, just run the cab then I tap the button and it changed the brightness really quickly, no menu or anything, I love it! If I walk out into the sun I just tap the button 3 times and my screen is bright.
Lobsterii, I love this program thanks a ton!

I'm glad that I could helped u out guys... actually there might be more funny stuff possible only if HTC release some documentation on theirs DLL files cos it's pain to guess arguments...

you did it all by guessing? I figured you would have decompiled the dll.

Truly excellent! I have also been looking for something like this for a long time.
I figured I might as well kick off the feature requests that always follow a new release: How about the option set both battery and power brightness with one command? Perhaps by a special switch, or by only specifying the brightness level (i.e. no 'b' or 'p' switch)? Or is there a way to do it already?
Thanks again for a useful app!

you did it all by guessing? I figured you would have decompiled the dll.
Click to expand...
Click to collapse
I've read some forum where someone pointed out that backlight function should be in some dll by HTC dunno where it was... Then I was googling "dll find export function" and I've found prog "DLL Export Viewer" which can show function names in dll. Unfortunatelly there is generally impossible to find out how many/what arguments the function has. So I've found function name like HTCUtilSetOnBatteryBrightnessLevel and I've simply try prototype int HTCUtilSetOnBatteryBrightnessLevel(int); but it crashed... so I keep going like int HTCUtilSetOnBatteryBrightnessLevel(int*); and it worked... voila...
pudifoot said:
Truly excellent! I have also been looking for something like this for a long time.
Click to expand...
Click to collapse
thx alot...
I figured I might as well kick off the feature requests that always follow a new release: How about the option set both battery and power brightness with one command? Perhaps by a special switch, or by only specifying the brightness level (i.e. no 'b' or 'p' switch)? Or is there a way to do it already?
Click to expand...
Click to collapse
done. + it's now compiled as an release version so it actually has 50KB less than old version... enjoy it's at the same place instead original files http://www.lobster.3web.cz/bordel/bl/index.htm...

Nice improvements! how about another a switch so that it will toggle between brightest to dimmest? So if this was used it would just go between 1 or 10 and none in between.

Thanks for implementing the feature I was looking for. A perfect application - it's small and fast, and it gets the job done with excellence.

Thank you. Works perfectly.

silentanvil said:
Nice improvements! how about another a switch so that it will toggle between brightest to dimmest? So if this was used it would just go between 1 or 10 and none in between.
Click to expand...
Click to collapse
hmhm... what I wouldn't do for y... There is new version 02 (on my web at the same place) where u can setup your own sequence. Length of sequence might be from 1 to 10... values are as usual from 0 to 9... But numbers must not repeat (known feature I don't see point to solve it) so u can set something like "bl02.exe 0 5 1 9 3" or whatever else... enjoy
Report any found bugs... I mean it's super simple but it's 4 am so I'm half sleeping...

lobsterii said:
hmhm... what I wouldn't do for y... There is new version 02 (on my web at the same place) where u can setup your own sequence. Length of sequence might be from 1 to 10... values are as usual from 0 to 9... But numbers must not repeat (known feature I don't see point to solve it) so u can set something like "bl02.exe 0 5 1 9 3" or whatever else... enjoy
Report any found bugs... I mean it's super simple but it's 4 am so I'm half sleeping...
Click to expand...
Click to collapse
Awesome! Thanks so much! I've also been looking everywhere for something like this!

Awesome!
Well done! I've been looking for ages for something to do this.

How to use bl02...
Something from lobsterii that helped me:
create link in Total commander (file manager) I think its in options "File -> >>>>> -> Create shortcut" then I have another file bl02.lnk then I open properties of the lnk file, I click tab shortcut and put the text of path into "" and after it I wrote parameters so it looks like
"\Program files\bl\bl02.exe" 1 3 9

OK dumb question and first time posting so don't slaughter me. If I understand the thread correctly this will put large buttons to adjust from the Backlight screen....correct? Is there a program (other than the PTT button which I'm using) that will allow a button or swipe to adjust the brightness without having to open the brightness display? If you get far enough to open the utility then its not that hard to move the brightness up. Sorry for the dumbness of the question.

volleykinginnc said:
If I understand the thread correctly this will put large buttons to adjust from the Backlight screen....correct?
Click to expand...
Click to collapse
my bl02.exe doesn't put any button anywhere... it's just app which actually toggle brightness. U can try to run it via file explorer it should change brightness...
volleykinginnc said:
Is there a program (other than the PTT button which I'm using) that will allow a button or swipe to adjust the brightness without having to open the brightness display?
Click to expand...
Click to collapse
There is plenty of programs to map this app to buttons, finger swipes and some other crazy stuff like voice commands etc.. For example I'm using FTouchFlo (u can use FTouchSl which is easier to configure) and map backlight change for finger swipes... Most easy way is just copy blXX.exe to /Windows/Start Menu/Programs/blxx.exe and then go to Start->Settings->(tab)Personal->Buttons and link it with some buton...
I'm just now at work so have no time for more explanation... but Once I get home I'll create some FAQ at download page cos... cos it'll be easier for all of us

dont sweat it that was a perfect explanation and I now have it helped me to get it running to a button.
One other quick question though....I have S2U2. So the button doesn't work until I have unlocked it (which sometimes is hard to see going out to daylight) is there any way (easy way, Im no programmer)to allow the button to work (that is brighten the display via the button I have it mapped to) while it is still locked?

volleykinginnc said:
dont sweat it that was a perfect explanation and I now have it helped me to get it running to a button.
One other quick question though....I have S2U2. So the button doesn't work until I have unlocked it (which sometimes is hard to see going out to daylight) is there any way (easy way, Im no programmer)to allow the button to work (that is brighten the display via the button I have it mapped to) while it is still locked?
Click to expand...
Click to collapse
I'm sure he won't be able to bypass A_C's S2U2, but (assuming you have a Kaiser, you didn't say) if you enable dpad in S2U2 you can always hold your right dpad button to make sure S2U2 is unlocked, even if you can't see the screen, and then hit the button for the "bl02.exe 9" link.

Ha ha...you guys are awesome! Right Dpad enabled and now it works like a charm even in the brightest sun!! Thanks for the great application...makes a big difference in usability.
Some of you experts ought to make a list of these application gems (this program/kaeser tweaks etc) to make it easy for the noobs like me. This is good stuff!!

Use of buttons and Canvas

Not entirely sure what I'm doing here but here's what I'd like to do. I use a Canvas watchface and I'd like to be able to hit the up button and see a weather center app or hit the down button and see some other app. Can I do that with Canvas/Pebble? How would I set that up?

rogerperk said:
Not entirely sure what I'm doing here but here's what I'd like to do. I use a Canvas watchface and I'd like to be able to hit the up button and see a weather center app or hit the down button and see some other app. Can I do that with Canvas/Pebble? How would I set that up?
Click to expand...
Click to collapse
I don't know about Canvas. I do this with Glance.

Belkiolle said:
I don't know about Canvas. I do this with Glance.
Click to expand...
Click to collapse
Looked at Glance but it was more difficult than it should be. At least at that point in my Pebble life. Ill try it again. How do you do this?

rogerperk said:
Looked at Glance but it was more difficult than it should be. At least at that point in my Pebble life. Ill try it again. How do you do this?
Click to expand...
Click to collapse
1. Open the Glance phone app.
2. Click on Customize Watch.
3. Scroll to the bottom to the Button Mapping section.
4. There are four button press mapping options there. Set them to whatever app you want that has Glance support.
You can also set a single custom app launch if you have the app's UUID.

Belkiolle said:
1. Open the Glance phone app.
2. Click on Customize Watch.
3. Scroll to the bottom to the Button Mapping section.
4. There are four button press mapping options there. Set them to whatever app you want that has Glance support.
You can also set a single custom app launch if you have the app's UUID.
Click to expand...
Click to collapse
Got it! Thanks! Still not sure if this is what I want but its fun to play.

Belkiolle said:
1. Open the Glance phone app.
2. Click on Customize Watch.
3. Scroll to the bottom to the Button Mapping section.
4. There are four button press mapping options there. Set them to whatever app you want that has Glance support.
You can also set a single custom app launch if you have the app's UUID.
Click to expand...
Click to collapse
I've got a screen set up but I can't get the weather to work. Always says no connection. Weather is one thing I want accuracy in.

You can accomplish what your are looking for with AutoPebble and Tasker. AutoPebble allows Tasker to react to button presses on your Pebble watch. Tasker can then launch a different Pebble app (AutoPebble plugin action) or load a different Canvas watch face. I use this to cycle between 2 different Canvas watch faces with the bottom button and to load different apps with the top button (freeCaddie, Roku remote, or NavMe depending on other variables set in Tasker). I also use the middle button to launch PebbleTasker with a menu tree to get to several other Tasker tasks.

camolito said:
You can accomplish what your are looking for with AutoPebble and Tasker. AutoPebble allows Tasker to react to button presses on your Pebble watch. Tasker can then launch a different Pebble app (AutoPebble plugin action) or load a different Canvas watch face. I use this to cycle between 2 different Canvas watch faces with the bottom button and to load different apps with the top button (freeCaddie, Roku remote, or NavMe depending on other variables set in Tasker). I also use the middle button to launch PebbleTasker with a menu tree to get to several other Tasker tasks.
Click to expand...
Click to collapse
I am trying to do something similiar. I have figured out how to intercept button clicks from tasker. However, each button press while in canvas leads to a strong vibration. Do you know how the vibration can be changed? Also, how do I prevent canvas from not changing the watch face if I press the up/down buttons? Currently pressing the up button skips track in my mobile and changes watchface in canvas.
Thanks

Disable every watchface in the Canvas app except the one you are using.

Erovia said:
Disable every watchface in the Canvas app except the one you are using.
Click to expand...
Click to collapse
This is just to prevent canvas from changing watchfaces, yeah? It still doesnt remove the vibration issue. I dont want the watch to vibrate each time i change the song...

Yes, this just prevents the watchface swap. As far as I know, there is no way you can disable the vibration.

I am trying to figure out TAsker/Pebble Tasker to be able to do the same thing. Tasker is way hard to use!!

Remap of capacitive buttons

Like the title says,
I'm looking for a way to remap my home button, specifically for use with tasker. I want tasker to map the home button to a certain launcher during specific times, and default launcher while outside of those times.
Any suggestions?
Sent from my XT1254

OR! If there is a way to have tasker change the default launcher during certain times this will automatically deal with the capacitive home button.
Sent from my XT1254

Are you just looking for a Tasker tutorial? What you're describing seems possible but would just require some playing around with Tasker to figure out.

swboland said:
Are you just looking for a Tasker tutorial? What you're describing seems possible but would just require some playing around with Tasker to figure out.
Click to expand...
Click to collapse
Ive got as far as I can in tasker, Ive messed around with it alot but i cant seem to figure out how to get tasker to do one of the following:
remap home key
change default launcher
theres a few simple ways to do it with root, but since the Droid Turbo isnt rooted yet I'm looking for a workaround.
Based on my knowledge so far - it IS possible without root, just not sure how its done.
there's an app called Home2 Shortcut - and its capable of remapping the home key, which leads me to think theres a way to do it manually with some terminal commands or possibly through an option in tasker that could be sitting right in front of my eyes.

Figured the whole thing out, if anyone requests it, I am willing to give some instructions on how to make a contextual home screen - certain home screens based on location, time, yaddiyadda
I did this so that my home button would default to a Launcher that I set up for work during my shift hours,
Outside of shift hours my home button will go to my default home screen with apps I use at home.
My work screen has navigation apps, shift planning apps, and PDA type set-up
My home/on the couch screen has netflix, chromecast, youtube, spotify, that kind of stuff.
It helps me separate my workflow at work from my workflow at home.
I call it Launcher Switcher, and im copywriting that right there.

ccheww said:
Figured the whole thing out, if anyone requests it, I am willing to give some instructions on how to make a contextual home screen - certain home screens based on location, time, yaddiyadda
I did this so that my home button would default to a Launcher that I set up for work during my shift hours,
Outside of shift hours my home button will go to my default home screen with apps I use at home.
My work screen has navigation apps, shift planning apps, and PDA type set-up
My home/on the couch screen has netflix, chromecast, youtube, spotify, that kind of stuff.
It helps me separate my workflow at work from my workflow at home.
I call it Launcher Switcher, and im copywriting that right there.
Click to expand...
Click to collapse
They stole the name already https://play.google.com/store/apps/details?id=kr.mobilefirst.launcherswitcher&hl=en

joshm.1219 said:
They stole the name already https://play.google.com/store/apps/details?id=kr.mobilefirst.launcherswitcher&hl=en
Click to expand...
Click to collapse
Crap! I'll just name it something else because its far more useful than that app
Sent from my XT1254

remap s-pen button

Anyone ever heard of a way to remap the button on the S Pen?
I rarely use the Air menu in fact I actually disabled it in options.
I do however use the pen in my hand probably 95% of the time, I love the precision as well as having the ability to hover over something without clicking it like a mouse can.
My only thought is that it would be amazing to be able to press the button and have it register as a tap at the current location instead of having it pop up in the air menu.
I also would love to be able to modify that SVG Circle that Prince the current pin location on screen to something more visible and possibly add a trail or something. I'm guessing this would require rooting. I am a long time desktop developer but this is my first time really delving into Android and I have noticed so many hidden services and apps that I would love to kill but I can't so it looks like I may have to root anyway.

That prints* sorry I tried to edit the typos but the save wouldn't send. I'm assuming my you block extension here is blocking some script. I've pretty much disabled 90% of the functionality on this phone just to help secure it that's another thing I need to look into browser security.

+1 on remapping the pen button

bober10113 said:
+1 on remapping the pen button
Click to expand...
Click to collapse
Yeah I think there's a lot of potential for some really helpful and amazing functions. First time I used this and noticed it could track on screen without touch I thought that was something very special. And then when I found that it could register a button press while hovering I immediately thought of thousand applications for this.
Just one off the top of my head. Imagine having an actual useful text to clipboard function where you simply hover the cursor over text you wanted and click the button to highlight and let go of button to stop highlighting. It would make copying text on the phone just like using a mouse. I am so sick of having to long press and stay completely still for the damn thing to register. We shouldn't have to do that with this s pen.

I have tried before on rooted note 3 to remap the s pen button but the phone didn't recognize the command... always pop up s pen menu. I think surely you need root before trying or try adb push.
Regards

Conito, I would love to hear more in-depth description of your attempt to remap it.

https://play.google.com/store/apps/details?id=com.gmd.spencontrol
this might be an option if you have rooted your phone.
it doesn't outright remap your button, but does let you execute commands by drawing lines or symbols while holding the button.
I haven't tested it since the note 2 though because I no longer root devices.

I have even wrote to Samsung asking for this. I want to be able to remap it for the eye dropper to when I'm drawing. It's set as the eraser from Samsung so hopefully someone will one day find a way to at least change the default tool (eraser) That might be easier than a whole other app or something.

cricketpaddleinmyhand said:
Conito, I would love to hear more in-depth description of your attempt to remap it.
Click to expand...
Click to collapse
Sorry mate you have to quote, I didn't see your post until now.
I just try to remap with applications like xposed additions and stuff like that. But the app didn't recognize when I pressed the button. So the only thing we can do is get into the app that manage the spen command and edit it with tools or things like that. I remember that some guy in the note 3 forum develop a simple app that can launch that application. So maybe that could be the solution: edit the behavior of the original spencommand app.
My best regards.