Related
Hi XDA experts,
I need help on how to recover from a boot loop for samsung gt-s5830i, I have the following scenarios;
1. The phone is not rooted ever since.
2. The 3 combo buttons to download mode are not working (power+volume DOWN+home). Basically I can press them but not working.
3. I can only access the android system recovery (3e) and I only have 4 choices (power+volume UP+home).
It's my friends phone, so I don't know the firmware version or baseband so to speak, what I know is it's made in China.
TIA,
chuckTaylor
Download mode (vol up + vol down + power)
Flash original frimware with this tutorial http://forum.xda-developers.com/showthread.php?t=1552792
Sent from my GT-S5830i
thanks! thanks! this will get me started...
Wipes + test
do Both Wipes + redbend Test [Fota]
the phone will restart normally working...
[ let me know if it works]
I successfully installed the stock firmware but I can't root it, when I tried to install from sd card in recovery menu I always encounter the ff:
"E:failed to mount /sdcard (No such file or directory)"
"E:Can't mount /sdcard"
can anyone help me get through this? TIA
chucktaylor_22 said:
I successfully installed the stock firmware but I can't root it, when I tried to install from sd card in recovery menu I always encounter the ff:
"E:failed to mount /sdcard (No such file or directory)"
"E:Can't mount /sdcard"
can anyone help me get through this? TIA
Click to expand...
Click to collapse
Can u enter the CWM menu?
In that case goto "mounts and 'something' " and mount sdcard.
Sent from my GT-S5830i
Good Morning
Very ironic,but i came here to ask about rooting my phone a year back and now i'm back in sort of the same situation..
A year back I rooted my froyo 2.2.1 based Galaxy S to a gingerbread version,then i used quite a few of the ICS roms available on this forum,had been using Cyanogen for the past few months.Yesterday i had some free time,so i thought would check out the JB roms available.
So i did the usual,download the JB version of Fishears since i had a iNand.put it in my internal sdcard..but i could not access the memory card from CWM 5.0.2.7..,so i put it in my external memory card and tried to run the zip from there,but the process got aborted in the middle,tried it twice,dint work.
Then i remembered i had faced this internal memory problem before,had to go and switch on the debugging mode in the developer option.[P.S:- i had been facing the encryption successful problem for half a year,was too lazy/busy to fix it,i just took it in my stride and rebooted a lot to get into the homepage]
So,I'm in CWM and i run the usual process and run the zip file from the internal sdcard,it started out fine,them BOOM.my phone reboots all of a sudden.When it restarts,it does not have a OS to boot into,the green android image with a red exclamation mark and a few text appears which happens too fast to read and it keeps rebooting and this process goes on.
I can still access CWM and the download mode,i tried going into CWM but the internal sd doesnt open and the zip file fails to mount from the external sd.
So i thought **** it,i'll do the rooting part again and i run up ODIN,download the semaphore 2.7.4 kernel,and i see it is just 15 mb or so,i remembered i used more than 1 file and used the pit folder also,but i read it on the semaphore website,its only 1 file and have to use it as the PDA.went to download mode and odin recognised it and the process completed without a hitch,it even showed a green PASS..
but the problem came when it had to reboot after the process,it got stuck in the "Galaxy S GT I9000" page and never moved forward.it was there for 30 minutes or so before i pulled out the battery.
Basically
1.I cant get past that page
2.I can access the CWM and Download modes
3.I accepted my mistake and thought of not doing any more mistakes,so icame here
4.When i boot into CWM mode,these errors come
E:failed to open/etc/recovery.fstab (No such file or directory)
E:unknown volume for path[/cache/recovery/command]
E:Can't mount /cache/recovery/command
E:unknown volume for path [/cache/revovery/log]
E:Cant mount /cache/recovery/log
E:Cant open /cache/recovery/log
E:unknown volume for path [/cache/recovery/last_log]
E:Cant mount /cache/recovery/last_log
E:Cant open /cache/recovery/last_log
E:unknown volume for path [/cache/recovery/command]
Click to expand...
Click to collapse
Cant access the external sd from the CWM now
I dont mind any os now,as long as i can take calls.Am leaving college for home by train day after,so i need a working os as soon as possible
Thank you for reading this and thank you in advance for taking your time to help me out
deathstoned said:
Good Morning
Very ironic,but i came here to ask about rooting my phone a year back and now i'm back in sort of the same situation..
A year back I rooted my froyo 2.2.1 based Galaxy S to a gingerbread version,then i used quite a few of the ICS roms available on this forum,had been using Cyanogen for the past few months.Yesterday i had some free time,so i thought would check out the JB roms available.
So i did the usual,download the JB version of Fishears since i had a iNand.put it in my internal sdcard..but i could not access the memory card from CWM 5.0.2.7..,so i put it in my external memory card and tried to run the zip from there,but the process got aborted in the middle,tried it twice,dint work.
Then i remembered i had faced this internal memory problem before,had to go and switch on the debugging mode in the developer option.[P.S:- i had been facing the encryption successful problem for half a year,was too lazy/busy to fix it,i just took it in my stride and rebooted a lot to get into the homepage]
So,I'm in CWM and i run the usual process and run the zip file from the internal sdcard,it started out fine,them BOOM.my phone reboots all of a sudden.When it restarts,it does not have a OS to boot into,the green android image with a red exclamation mark and a few text appears which happens too fast to read and it keeps rebooting and this process goes on.
I can still access CWM and the download mode,i tried going into CWM but the internal sd doesnt open and the zip file fails to mount from the external sd.
So i thought **** it,i'll do the rooting part again and i run up ODIN,download the semaphore 2.7.4 kernel,and i see it is just 15 mb or so,i remembered i used more than 1 file and used the pit folder also,but i read it on the semaphore website,its only 1 file and have to use it as the PDA.went to download mode and odin recognised it and the process completed without a hitch,it even showed a green PASS..
but the problem came when it had to reboot after the process,it got stuck in the "Galaxy S GT I9000" page and never moved forward.it was there for 30 minutes or so before i pulled out the battery.
Basically
1.I cant get past that page
2.I can access the CWM and Download modes
3.I accepted my mistake and thought of not doing any more mistakes,so icame here
4.When i boot into CWM mode,these errors come
Cant access the external sd from the CWM now
I dont mind any os now,as long as i can take calls.Am leaving college for home by train day after,so i need a working os as soon as possible
Thank you for reading this and thank you in advance for taking your time to help me out
Click to expand...
Click to collapse
you may try this, if you can boot to download mode but make sure your is GT-I9000
Before start, please backup all your important data and phones setting. Then,
Step 1:
I) Download Android 2.3.6 Gingerbread Value Pack (XXJVU)
II) Download ODIN http://www.mediafire.com/?nhhhkm5c2j43rhw Extract Odin3 v1.7.zip to get .exe file
also download the pit file, http://www.mediafire.com/?v2rub40k1bvccj4
Step 2: Extract the ROM [password: samfirmware.com]
Step 3: Launch ODIN. (Don’t open Samsung Kies)
Step 4: Turn off your Galaxy S.
Step5: Put your Galaxy S into Download Mode by Press and hold Volume Down + Home + Power buttons to boot into Download Mode.
Step 5: Connect your Galaxy S with your PC using a USB cable. (Before proceed to Next Step, please make sure that ODIN detect your device)
Step 6:
Click on Odin PIT Tab
Select the PIT – s1_odin_20100512.pit
Click on Odin PDA Tab
Select the CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 file.
Click on Odin PHONE Tab
Select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5.
Click on Odin CSC Tab
Select GT-I9000-CSC-MULTI-OXAJVU.tar.md5.
Step 9: Click on START in ODIN to start flash the leaked firmware on your device.
hope this will help.
I had this problem with Paranoid Android before... the zip was corrupt.
If you are able to extract the rom with winrar/winzip/totalcmd or other program, install it, if it is corrupt, download it again again and again...
Sent from my GT-I9000 using xda premium
Samtan4326 said:
you may try this, if you can boot to download mode but make sure your is GT-I9000
Before start, please backup all your important data and phones setting. Then,
Step 2: Extract the ROM [password: samfirmware.com]
Step 3: Launch ODIN. (Don’t open Samsung Kies)
Step 4: Turn off your Galaxy S.
Step5: Put your Galaxy S into Download Mode by Press and hold Volume Down + Home + Power buttons to boot into Download Mode.
Step 5: Connect your Galaxy S with your PC using a USB cable. (Before proceed to Next Step, please make sure that ODIN detect your device)
Step 6:
Click on Odin PIT Tab
Select the PIT – s1_odin_20100512.pit
Click on Odin PDA Tab
Select the CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 file.
Click on Odin PHONE Tab
Select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5.
Click on Odin CSC Tab
Select GT-I9000-CSC-MULTI-OXAJVU.tar.md5.
Step 9: Click on START in ODIN to start flash the leaked firmware on your device.
hope this will help.
Click to expand...
Click to collapse
Did what u said,got past odin,then it went into the setup on the phone and all of a sudden it went into the recovery screen,the message shown is
-- wiping data...
Formatting /data...
E:format_volume: rfs format failed on /dev/block/macblk0p2
Formatting /dbdata...
formatting /cache
Deleting meta data
Data wipe Failed
-- Applying Multi-CSC..
Installing Multi-CSC
APPLIED THE csc-Code "CPW"
Successfully applied multi-CSC
Click to expand...
Click to collapse
I have a option to reboot,its the samsung recovery screen..its still there,i havent touched my phone since then
deathstoned said:
Did what u said,got past odin,then it went into the setup on the phone and all of a sudden it went into the recovery screen,the message shown is
I have a option to reboot,its the samsung recovery screen..its still there,i havent touched my phone since then
Click to expand...
Click to collapse
flash CF-root for xxjuv with a pit512 (repartition ticked) cf-root can download from here http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
Once rooted with CWM, enter CWM using combo keys and enter "mounts and storage" and format everything except Boot and also do the full wipes one more time
Finally Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this
issued.
http://forum.xda-developers.com/showthread.php?t=1841250 <--- this is very useful link for new user from xsenman
Samtan4326 said:
flash CF-root for xxjuv with a pit512 (repartition ticked) cf-root can download from here http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
Once rooted with CWM, enter CWM using combo keys and enter "mounts and storage" and format everything except Boot and also do the full wipes one more time
Finally Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this
issued.
http://forum.xda-developers.com/showthread.php?t=1841250 <--- this is very useful link for new user from xsenman
Click to expand...
Click to collapse
flashed it with CWM,went into it and in Mounts and storage there is only 1 option- "mount USB storage"
Nothing else
Below that in the CWM message area,there is
E:unknown volume for path [/system]
E:unable process volume! Skipping...
Checking /data...
E:unknown volume for path [/data]
E:unable process volume! Skipping...
checking /cache...
E:unknown volume for path [/cache]
E:unable process volume! Skipping...
Done!
E:unknown volume for path [/cache/recovery/command]
E;Cant mount /cache/recovery/command
E:unknown volume for path [/cache/recovery/log]
E:Cant mount /cache/recovery/log
and the same for last_log
Click to expand...
Click to collapse
deathstoned said:
flashed it with CWM,went into it and in Mounts and storage there is only 1 option- "mount USB storage"
Nothing else
Below that in the CWM message area,there is
Click to expand...
Click to collapse
select mounts and storage format everything except Boot and also do the full wipes one more time and power off your phone
reboot to download mode follow by Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this.
Samtan4326 said:
select mounts and storage format everything except Boot and also do the full wipes one more time and power off your phone
reboot to download mode follow by Flash the JVU+Root again one more time with PIT (repartition) to resolve this issue ...you may need flashing twice or more to solve this.
Click to expand...
Click to collapse
I dont think you got what i said.I installed CFW and went into the recovery,there under Mounts and storage ,there was nothing apart from "mount USB storage"..not even Mount BOOT..nothing apart from that 1 option..when i tried to do a wipe "data/factory reset or cache" it showed me that message which i posted above.still i installed the jvu+root again (Twice actually),it was the same result,the error i posted 2 posts above.
I'm in no mans land now and cant do anything apart from my phone apart from go into download and recovery mode
Please someone help me,i've to go on a 33 hr train journey tmrw and without a phone,it'll be really troublesome
Have you tried the EZ Recovery kit by Slaphead20?
http://forum.xda-developers.com/showthread.php?p=29114573
Sent from my GT-I9000
amerkiller1995 said:
Have you tried the EZ Recovery kit by Slaphead20?
http://forum.xda-developers.com/showthread.php?p=29114573
Sent from my GT-I9000
Click to expand...
Click to collapse
New developments now
I followed the steps given in the EZ recovery mode,it crashed into the same e3 recovery mode,for the heck of it i flashed the CFROOT which was provided and it worked fine..all disks were mounted fine and no errors in cwm,
went into Mounts and storage and formatted everything apart from boot and followed the rest of samtans advice
It crashed into the same e3 Rec mode again with the same meta data error message
any suggestions guys,atleast now i'm hopeful after seeing that CWM screen without any errors
deathstoned said:
New developments now
I followed the steps given in the EZ recovery mode,it crashed into the same e3 recovery mode,for the heck of it i flashed the CFROOT which was provided and it worked fine..all disks were mounted fine and no errors in cwm,
went into Mounts and storage and formatted everything apart from boot and followed the rest of samtans advice
It crashed into the same e3 Rec mode again with the same meta data error message
any suggestions guys,atleast now i'm hopeful after seeing that CWM screen without any errors
Click to expand...
Click to collapse
After flashing ez base, flash Cm9 and then if you want cm10
Sent from my GT-I9000
amerkiller1995 said:
After flashing ez base, flash Cm9 and then if you want cm10
Sent from my GT-I9000
Click to expand...
Click to collapse
Ok dont know whether this is good or bad
I installed CM9 from the external sd as the internal sd was inaccesible in any way..the installation showed info like
"the internal sd card marker could not be found
Going ahead with installation"
the installation continues and restarts once and updates but it does not boot into the main page,it directly goes into the Encryption Unsuccessful page.When i try Reset Phone,it goes into the CWM recovery screen with some errors,
when i try to install CM10 from this recvery screen,it initially stops the installation saying the data partition layout is different and all my data will be wiped.run the .zip to go ahead with the progress.I run this it goes directly into the CWM 6.0._._ and it doesnt show any errors,i try to reboot it gets stuck on the galaxy s screen.
this situation is better than the previous condition as i know a OS can still run on my Phone..Just need to get this thing rectified now
Please if anyone could help me right now,i would be really grateful..not able to contact anyone without my phone
It might be a hardware problem... I had something similar
http://forum.xda-developers.com/showthread.php?t=1895224
But for now go to Ez recovery and then try Darky's Resuruction ROM.
Sent from my GT-I9000
amerkiller1995 said:
It might be a hardware problem...
But for now go to Ez recovery and then try Darky's Resuruction ROM.
Sent from my GT-I9000
Click to expand...
Click to collapse
I installed Cyanogen 9 and got through tht EU page by restarting abut 20 times or so,now i'm trying to install a working version of gapps in it.Tried 1 but the setup failed,so i flashed back to Cyanogen 9 and am not touching it till i reach home.a device capable of making and taking calls is better than nothing..
Is there a way to download contacts from gmail without gapps,the play store is not included in the original rom and i'm hesitant to go into CWM recovery mode as i will have to tackle the EU page again
Anyways thanks for your help,will have to fix this problem once and for all after i reach home
I don't know about contacts from gmail. When you're home look at my updated post above
Sent from my GT-I9000
basically
just reflash gingerbread
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Would be great if you tried to explain what you tried to do with odin anyway.
what rom you tried to install?
ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Who says?
Which Rom are you trying to use and what are you coming from?
If flashing ODIN for JVU Rom :
Use ODIN with PIT File
PIT File Incase you need it : LINK
Open Odin and select 512 .PIT, and put in your files for : CSC, PDA, MODEM.
Check Re-partition and don't touch any other settings.
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER.
Attach Phone
When you have all the files needed in ODIN, say JVU Rom for example as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone
Unplug Phone > Let it power up then Power Off > Again into Download mode
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted *File is included in ODIN Files*
Same again when you see S Logo on Phone unplug Phone Cable
Close ODIN
Let phone boot up ....
What I do now is go into
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Before doing this make sure you have what you need from the phone as it will ERASE everything!
Enable USB Debugging by going to Settings > Applications > Development > Check USB Debugging
Plug in Phone and copy over your chosen Custom ROM that you want
Reboot into Recovery : VOL UP + MENU + POWER
Wipe the 4 things (probably know these... you should do)
If not you choose these by using the left side keys on the phone and to apply changes click Menu key
WIPE : data/factory reset > cache partition
Scroll down and go to advanced
Dalvik Cache > Battery stats
Go Back
Install ZIP (ROM) from Zip Card
Reboot Phone when complete... DONE!
Hope this helps a lot of people if not just ask here if you are still having issues to save peole posting same questions again and again
I made up the first part, but after the phone went into recovery mode
The screen shows the following:
installin update ...
successfully installed package.
- Copying media files ...
e: failed to mount / sdcard (file exists)
e: copy_dbdata_media: cant mount / sdcard your storage not prepared yet. please use meny VI for format and reboot actions.
meida files copy failed.
- Wiping data ...
Formatting / data ...
e: format_volume: rfs format failed on / dev/block-mmcblkqp2
Formatting / dbdata ...
Formatting / cache ...
deleting meta data
Data wipe failed.
- Appling Multi-CSC ...
installing multi-csc
Cant access to / system / csc / eng / system /.
successfuly applied multi-csc.
Flash dbdata.rfs as PDA in Odin 1.85. Reboot. Congratulate yourself.
Sent from my GT-I9000 using Tapatalk 2
Helpppp
I have exactly the same problem. I had froyo 2.2 im new to this odin all these settings. Yesterday i was tried rooting my phone and I did. but after I mounted a courrupted rom from the recovery. and my android doesn't want to load. I followed the same instructions you just gave him. on these posts but now when i turn on the phone its the logo comes and nothing loads. Only Downloading VOL DWN + MENU + PW is working.
Are you talking to me devildrake? No, your problem is different and you need to flash the rom again too, not just dbdata lol. Do this.
Flash Gingerbread, in Odin (I always used JW4 but JVU will be fine) with 512 pit file and repartition checked. Untick reboot. Once its finished, unplug the USB cable and take the battery out. Put the battery back in and boot into download mode. Reset Odin. USB cable back in. Tick reboot again. Put dbdata.rfs in PDA. Flash.
Should boot into gingerbread. I've done this a LOT of times... Then you can go back to Odin and root.
If that doesn't work then I'd download a different version of GB, download new 512 pit, and download a new dbdata.rfs. Must be one of those corrupt.
Sent from my GT-I9000 using Tapatalk 2
Hello All,
I have a Samsung Galaxy I9070.
I have rooted the device from http://forum.xda-developers.com/showthread.php?t=2087424 and it worked fine.
After that i tried to Flash a CWM 5 XX version,
1. I wiped all the data/reset
2. While flashing it from "Apply update from external storage" the device got powered off.
3, I did a hard restart to enter recovery mode and then CWM showed up and stared to blink.
4. Now i got a error as E: Failed to mount / efs(invalid argument).
5. i have restarted the device.
6. i am getting a error as Unfortunately,the processcom.google.process.gapps has stopped.
Now i thought to flash a new rom from SD card and then it may work.
1. i flashed cynogen Mod 11.0
2. after that it is just stuck at the starting screen of Cynogen Mod logo.
Now i have restored the Jellybean from Odin and still i get the same error as Unfortunately,the processcom.google.process.gapps has stopped.
and also in the recovery mode E: Failed to mount / efs(invalid argument). this error stayed.
Please help me to get the device back to working.
Just an update-
1. i have used ODIN and installed Ginger bread on it.
2. The phone got turned on and working.
3. I am not able to connect to Wifi.
4. But when i go to recovery mode, it still shows that error as E: Failed to mount / efs(invalid argument).
5. I think this this EFS file is corrupted and so Mac address of the device is corrupted.
How do i fix this error. Please help. i have not taken a backup of this efs.
Thanks All.
rohanpakala said:
Hello All,
I have a Samsung Galaxy I9070.
I have rooted the device from http://forum.xda-developers.com/showthread.php?t=2087424 and it worked fine.
After that i tried to Flash a CWM 5 XX version,
1. I wiped all the data/reset
2. While flashing it from "Apply update from external storage" the device got powered off.
3, I did a hard restart to enter recovery mode and then CWM showed up and stared to blink.
4. Now i got a error as E: Failed to mount / efs(invalid argument).
5. i have restarted the device.
6. i am getting a error as Unfortunately,the processcom.google.process.gapps has stopped.
Now i thought to flash a new rom from SD card and then it may work.
1. i flashed cynogen Mod 11.0
2. after that it is just stuck at the starting screen of Cynogen Mod logo.
Now i have restored the Jellybean from Odin and still i get the same error as Unfortunately,the processcom.google.process.gapps has stopped.
and also in the recovery mode E: Failed to mount / efs(invalid argument). this error stayed.
Please help me to get the device back to working.
Just an update-
1. i have used ODIN and installed Ginger bread on it.
2. The phone got turned on and working.
3. I am not able to connect to Wifi.
4. But when i go to recovery mode, it still shows that error as E: Failed to mount / efs(invalid argument).
5. I think this this EFS file is corrupted and so Mac address of the device is corrupted.
How do i fix this error. Please help. i have not taken a backup of this efs.
Thanks All.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2677807
Try this maybe.
I have the same problem.
I wanted to flash a new rom and and deleted some unnecessary folders and I deleted some hidden folders.
I can enter on recovery/downloading but I can't flash any rom.
I've flashed a stock rom (JB) via Odin and it restart the device on setup screen but it gives 2 errors (I'll post the images).
I've flashed another stock rom (GB) via Odin and it restart the device on the home screen but whenever I go to recovery it shows me the the message E: Failed to mount / efs (Invalid argument)
I've tried some methods I've found on the forum but they didn't work.
The link posted don't work for me.
My phone connect to 3G and don't shows the error "Baseband and IMEI unknown / Baseband unchangeable".
I didn't find any thread on the forum with the answer for my problem.
Hi, I hope some can help me
Here´s my story, the phone is a Galaxy Ace GT-S5830m, that had GingerBread 2x, I wanted to take it to Kit kat 4x, then I downloaded the CWM 6.0.4.6, but, because of my ignorance, I didn't downloaded the KitKat rom file at the same time, I successfully installed the CWM file, but after this the phone won't boot. The only thing it does is:
Enter recovery mode by pressing Volume Up+Home+Power
Show the Samsung logo
But I cannot make it enter download mode, if I hit VolumeDown+Home+Power it just shows the Samsung logo
If I connect it to the PC via USB cable, the PC won't recognize the phone on the USB drivers list. I already downloaded the Samsung USB drivers
When I enter recovery mode I see the four options for
rebbot system now
apply update from sdcard
wipe date/factory reset
wipe cache partition
And below that I see --Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
What can I do? I'm I done? Please help! Thanks!
egomezmx said:
Hi, I hope some can help me
Here´s my story, the phone is a Galaxy Ace GT-S5830m, that had GingerBread 2x, I wanted to take it to Kit kat 4x, then I downloaded the CWM 6.0.4.6, but, because of my ignorance, I didn't downloaded the KitKat rom file at the same time, I successfully installed the CWM file, but after this the phone won't boot. The only thing it does is:
Enter recovery mode by pressing Volume Up+Home+Power
Show the Samsung logo
But I cannot make it enter download mode, if I hit VolumeDown+Home+Power it just shows the Samsung logo
If I connect it to the PC via USB cable, the PC won't recognize the phone on the USB drivers list. I already downloaded the Samsung USB drivers
When I enter recovery mode I see the four options for
rebbot system now
apply update from sdcard
wipe date/factory reset
wipe cache partition
And below that I see --Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
What can I do? I'm I done? Please help! Thanks!
Click to expand...
Click to collapse
Hi
Flash a custom recovery like cwm v5 n then erase all like data sytem etc then download the .zip file that roots ur fone n flash it n then do a wipe data n thn place any custom rom of ur device n flash. . . If dsnt wrk do tl me
Hit Thanks
more questions
Raakib Zargar said:
Hi
Flash a custom recovery like cwm v5 n then erase all like data sytem etc then download the .zip file that roots ur fone n flash it n then do a wipe data n thn place any custom rom of ur device n flash. . . If dsnt wrk do tl me
Hit Thanks
Click to expand...
Click to collapse
Hi Raakib, thanks for taking the time to answer! But how can I put the cwm v5 in the phone if the PC doesn't see the phone? Sorry for the basic questions? I'm new in this things. The first time I did this I pluged the phone to the PC and I was able to see the memory card in the windows explorer so I only did a drag and drop, but that doesn't work any more, please advice, thanks!
just do 1 thing download the recovery file on your pc and then plug your sd card using any sort of card reader and then copy the file to memory card . Then insert the memory card in the phone and go to recovery and flash it. Hit thanks.
---------- Post added at 03:30 AM ---------- Previous post was at 03:28 AM ----------
if u want that your pc should recognize your phone, take it to download mode and see it gets detected in odin or not , if not then swap the drivers maybe upgrade or downgrade.
still no luck
Raakib Zargar said:
just do 1 thing download the recovery file on your pc and then plug your sd card using any sort of card reader and then copy the file to memory card . Then insert the memory card in the phone and go to recovery and flash it. Hit thanks.
---------- Post added at 03:30 AM ---------- Previous post was at 03:28 AM ----------
if u want that your pc should recognize your phone, take it to download mode and see it gets detected in odin or not , if not then swap the drivers maybe upgrade or downgrade.
Click to expand...
Click to collapse
Hi Raakib, just to let you know that I haven't had any luck with this, this is what I have tried, with a memory card reader connect to my PC, because the PC still doesn't see the phone
Using CWM v5.0.2.6 and with that version trying to install the original rom I get this
-- Installing: /sdcard/Downloads/S5830MUMnD1_S5830MTCEND1_TCE.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
So my attempt to recover gingerbread was unsuccessful, now, in all honesty I have no idea if I'm using the correct zip file of gingerbread, I mean, I downloaded from the sammobile page and choose the one for my country, but the instructions call for odin and to unzip the fiel, so I don't know if this zip file can just be copied to the SDcard and be unziped with CWM. So CMW needs special rom files different from the ones odin uses?
On my second attempt using CWM 6.0.4.6 to try to install kit kat 4.4 using the instructions from the androidcure website called "How to install Android KitKat on Samsung Galaxy Ace S5830", it mentions that I must use cwm v6 and the rom file called cm-11.0.0-RC4-GT-S5830-cooper-PS.zip I get this
-- Install /sdcard/Downloads ...
Finding update package...
Opening update package...
This package is for "cooper.GT-S5830" devices: this is a "".
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted
If I use cwm v5 to try to mount /system (which is permanently un-mounted) I get this
mount: mounting /dev/block/stl9 on /system failed: Invalid argument
W:failed to mount /dev/block/stl9 (File exists)
W:failed to mount /dev/blockstl9 (no such device)
Error mounting system!
The phone still won't go in download mode and is still not visible by the PC
Any other suggestion? Thanks!!!!
egomezmx said:
Hi Raakib, just to let you know that I haven't had any luck with this, this is what I have tried, with a memory card reader connect to my PC, because the PC still doesn't see the phone
Using CWM v5.0.2.6 and with that version trying to install the original rom I get this
-- Installing: /sdcard/Downloads/S5830MUMnD1_S5830MTCEND1_TCE.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
So my attempt to recover gingerbread was unsuccessful, now, in all honesty I have no idea if I'm using the correct zip file of gingerbread, I mean, I downloaded from the sammobile page and choose the one for my country, but the instructions call for odin and to unzip the fiel, so I don't know if this zip file can just be copied to the SDcard and be unziped with CWM. So CMW needs special rom files different from the ones odin uses?
On my second attempt using CWM 6.0.4.6 to try to install kit kat 4.4 using the instructions from the androidcure website called "How to install Android KitKat on Samsung Galaxy Ace S5830", it mentions that I must use cwm v6 and the rom file called cm-11.0.0-RC4-GT-S5830-cooper-PS.zip I get this
-- Install /sdcard/Downloads ...
Finding update package...
Opening update package...
This package is for "cooper.GT-S5830" devices: this is a "".
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted
If I use cwm v5 to try to mount /system (which is permanently un-mounted) I get this
mount: mounting /dev/block/stl9 on /system failed: Invalid argument
W:failed to mount /dev/block/stl9 (File exists)
W:failed to mount /dev/blockstl9 (no such device)
Error mounting system!
The phone still won't go in download mode and is still not visible by the PC
Any other suggestion? Thanks!!!!
Click to expand...
Click to collapse
the stock/original rom wont flash in the recovery. try to flash some other custom rom in CWM 5 and before flahing any rom you need to do a full factory reset and whether in cwm5 or 6 i m nt sure go into advance and wipe efs etc there then flash a rom. If still nothing then contact me i will tell you some great thing +918715031141. (my personal number)