Hi guys! I need your help. I have z1 with ROOT and custom recovery and i would like to update it to android m. The main probleme - bootloader, i should unlock it. But i can't do it because phone doesn't determined by pc in fastboot mode or flashmode and when phone is off doesn't determined at all. But even when phone is on, pc detected phone not always, just sometimes, and phone doesn't charging. ADB drivers is installed, drivers for flashtool mode and fastboot is installed. Command window says "waiting for device" when i want to boot my phone in fastboot. When phone is on ADB works fine. So i've read many topics about problems like that and didn't find the solution. Maybe can anybody help me please?
In ADB , use the command: adb reboot bootloader
The phone will reboot and you'll be in fastboot mode and the phone will show a deep blue notification light.
You need to install fastboot drivers from the driver package bundled along with flashtool before this. So u have to donwload flashtool first
Also, if u're going to unlock the bootloader then back up your TA partition.
In ADB , use the command: adb reboot bootloader
The phone will reboot and you'll be in fastboot mode and the phone will show a deep blue notification light
Click to expand...
Click to collapse
Yeah, I did it, the phone was showing blue led, but then it goes nothing, then pc doesn't "see" the phone. I have already installed flashtool and drivers with it for fastest and flashtool. Also I have already made a backup of TA through flashtool.
So I can do something with phone through flashtool or adb when phone is on, but when phone is off I can't do anything. I have heard that reason of that problem can be broken phone's USB port. What do you think?
And sorry for my terrible English
I've connected phone to pc in flashmode through NDR Utils, but fastboot still doesn't work
honestly, im stumped!! . AFAIK its not a problem with the usb port cuz as you said it works fine with adb. Did you try a different usb cable.
You should probably try to reinstall the fastboot drivers
But if you just wanna unlock the bootloader then you can do that with flashtool I think.
But if you just wanna unlock the bootloader then you can do that with flashtool I think.
Click to expand...
Click to collapse
Yes, but to unlock bootloader through flashtool I should go to fastboot
wait, does the blue led come on and disappear?? it sounds like a loose USB cable
masterofnocrack said:
wait, does the blue led come on and disappear?? it sounds like a loose USB cable
Click to expand...
Click to collapse
No, the blue led come on and lights until i unplug the cable.
Is it not a normal?
I have the same problem xD
All the time it worked, wtf
zawy. said:
I have the same problem xD
All the time it worked, wtf
Click to expand...
Click to collapse
Did you find the solution?
What did you do to fix it? Maybe we can help to each other
Hi! It's me again And i still didn't solved my probleme. So, i can connect my phone to PC and it recognize as Android device -> ADB interface, and as Xperia z1. If i just connect powered off phone to PC or connect phone in flash mode, then it recognize as USB devices -> SOMC Flash Device, is it right? Ok, when i want to connect phone in fastboot, phone shows blue LED and it goes nothing, PC don't determine the phone and i can't unlock bootloader
Related
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. I downloaded the Android SDK latest and replaced the USB driver INF file with the one sony give you but it didn't work so reversed back to the other driver the SDK manager installs and that didn't work either.
I've been through the tutorials and even tried to update the driver in device manager in the few seconds it stays there but that didn't work either! USB debugging is enabled too!
Please help, I'm not a noob and have done fastboot booting before and yes for those who may ask have already checked to make sure the bootloader can be unlocked and yes it can also the phone is NOT branded and is unlocked to all networks.
Any help will be appreciated, thanks!
Dave.
Are you on Windows 8? Using USB 3.0?
"As your flesh bears the sigil....your name is that....of a recusant."
First be sure you're using a 2.0 usb port, if this is ok maybe it's a windows 8 driver problem, so you should try this http://forum.xda-developers.com/showthread.php?t=2170114. It works for me
For also fastboot and flashmode come for 5 Sec. So Make sure you prepare the file and attach the device to fastboot or flashmode when it is asked.
Still problems
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
darkdemon32 said:
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
Click to expand...
Click to collapse
Hmm...how many USB ports are being used when you're flashing the phone?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Fastboot with Xperia XP
I have the same problem, can't get it to fastboot mode.
Tried the Windows 8 zith USB 2, and also on XP machine where I was succesfully used it for a Xperia U.
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
sarkar1990 said:
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
Click to expand...
Click to collapse
Opensource forever)))
Sent from my ME371MG using xda app-developers app
same problem...
m having same kind of problem i was trying to flash boot img from cm 11 but fast boot isnt recognizing my device any more.my sp is rooted bootloader unlocked.fast boot was recognizing it yesterday.please tell me what to do
What I did was use a Windows XP machine.
Couldn't get it to work on my Windows 7/8, because of the restrictions in driver signatures.
Sent from my C5303 using Tapatalk
fastboot
darkdemon32 said:
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. .
Click to expand...
Click to collapse
I have a similar problem. the power light lights up blue then passes into the phone starts loading mode
Sorry for bad English
The updated version (09.14) don't work properly. It doesn't enable me to go to Flashmode. Uninstalled and used the previous version and it worked as it should, no issues entering Flashmode.
i might have actually found the solution. im on the 4.3fw build version 12.1.a.1.201... in my case, my pc will automatically install the drivers for mass storage giving me no chance to update the driver to the one from sony.
you need to do step 9. and 10. if you havent done so from http://unlockbootloader.sonymobile.com/instructions
what i did was allow developer settings and allow debugging via usb.
plug in and attempt to go in to fastboot and obviously it'll fail.
go to device manager. (control panel->hardware and sound->device manager) quickly scroll down go to other devices. you will see s1fastboot (or something like that) if you're quick enough, if not, in my case, the phone will go in to charging mode.
what i did was to disable xperia sp mass storage from disk drives category too.
right click on it and select update driver software and you will select the file you've unzipped (following step 9 and 10 sony's instructions).
after it has finished updating, unplug your usb and attempt to enter fastboot, it should work.
PS: im no expert, this solution might be out there somewhere already or it could just be a great coincidence. some of these steps might not be useful even.
Had this problem and found a funny solution: I switched my cable and the port I was using. Both Ubuntu and Windoze 7 failed on both fastboot and flash mode, even though in both the phone would charge. I grabbed a spare micro USB cable and plugged it into the front of the PC; voila. Now the phone is rooted and running the latest CM.
Need a final solution for this problem
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
TheTras said:
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
Click to expand...
Click to collapse
Are you trying to unlock your phone?
Have you installed device specific/fastboot/flashmode drivers via FlashTool? If you are on Windows 8/8.1, you need to disable driver verification to get it done.
Alternatively if you just wanna unlock your bootloader, you can use the BLU option in FlashTool. Again all drivers will need to be properly installed for your phone to be detected correctly.
You say you had the same problem with stock firmware which means you probably haven't setup adb/fastboot properly on your PC. Does your phone get detected correctly in Device Manager? Have you tried installing drivers via Device Manager?
....
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
TheTras said:
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
Click to expand...
Click to collapse
I meant install drivers via FlashTool. Go to C:\Flashtool\drivers or wherever you have installed Flashtool and run the Flashtool-drivers.exe.
Select flashmode drivers, fastboot drivers and common drivers viskan board (SP drivers) and install them. Like I said if you are on Win 8/8.1, you will have to disable driver signature enforcement. Just look it up in YouTube and follow a tutorial.
Hi guys,
I accidentally formatted /system on my T with UB.
Now it won't start (it says "Sony", then nothing happens). It now has no recovery and if I connect the phone in fastboot or flashmode, the usual PC I use to flash says me that "Sony ADB interface" is connected, but it can't find any driver.
What can I do now?
Thanks in advance for the reply.
DS-1 said:
Hi guys,
I accidentally formatted /system on my T with UB.
Now it won't start (it says "Sony", then nothing happens). It now has no recovery and if I connect the phone in fastboot or flashmode, the usual PC I use to flash says me that "Sony ADB interface" is connected, but it can't find any driver.
What can I do now?
Thanks in advance for the reply.
Click to expand...
Click to collapse
If it says "Sony ADB interface" when you connect it, then you don't need a driver, it's already installed (you can confirm this if you open Device Manager in Windows and check if it's listed as an "ADB interface" and there are no "Unknown Devices" and/or devices named in relation to your phone that have a yellow exclamation mark.
Just flash a stock FTF, or download one of the kernels for T that have a recovery, and flash any ROM you like.
First of all, thanks for the reply.
The strange thing about this time brick is that my pc doesn't recognize the phone. Other times, infact, I used it with the same phone to relive the Xperia T, after strange things happened.
Instead, this time the phone is recognized as "Sony ADB interface" and the pc says there's no driver in it. And it can't find in the system (I'm using an old laptop with Windows XP on it).
That's the reason why the system (and Flashtool, too: it says, in red, that I need to install the drivers for my phone) doesn't recognize the phone.
Now I'm trying the T into another Windows XP old laptop system...I hope it works (and I hope USB 1.1 will be fine, too...).
EDIT: this "new" pc see my phone, connected in fastboot mode, as "SEMC Flash Device" and it is installing the drivers. I've already installed fastboot/flashmode drivers from Flashtool Drivers folder.
RE-EDIT: PC can see the Xperia T, but Flashtool always says that it is connected in "flash mode", even if I connect it in fastboot mode. What should I do, now?
RE-RE-EDIT: The phone is recognized only in flashmode, even if I installed all the drivers. I'm trying to flash .141 and it seems to work. Let's see what happens.
Antiga Prime said:
If it says "Sony ADB interface" when you connect it, then you don't need a driver, it's already installed (you can confirm this if you open Device Manager in Windows and check if it's listed as an "ADB interface" and there are no "Unknown Devices" and/or devices named in relation to your phone that have a yellow exclamation mark.
Just flash a stock FTF, or download one of the kernels for T that have a recovery, and flash any ROM you like.
Click to expand...
Click to collapse
DS-1 said:
First of all, thanks for the reply.
The strange thing about this time brick is that my pc doesn't recognize the phone. Other times, infact, I used it with the same phone to relive the Xperia T, after strange things happened.
Instead, this time the phone is recognized as "Sony ADB interface" and the pc says there's no driver in it. And it can't find in the system (I'm using an old laptop with Windows XP on it).
That's the reason why the system (and Flashtool, too: it says, in red, that I need to install the drivers for my phone) doesn't recognize the phone.
Now I'm trying the T into another Windows XP old laptop system...I hope it works (and I hope USB 1.1 will be fine, too...).
EDIT: this "new" pc see my phone, connected in fastboot mode, as "SEMC Flash Device" and it is installing the drivers. I've already installed fastboot/flashmode drivers from Flashtool Drivers folder.
RE-EDIT: PC can see the Xperia T, but Flashtool always says that it is connected in "flash mode", even if I connect it in fastboot mode. What should I do, now?
Click to expand...
Click to collapse
Ok, well, no idea about it being stuck in flash mode, but, isn't that exactly what you want? To flash a stock FTF you need to be in flash mode. As a matter of fact, you can even flash only the kernel of an FTF in flash mode, it wouldn't have a recovery, since it would be a stock kernel, but at least you could get a working kernel, if that were the issue, which it is not.
What are you doing to put your phone into fastboot mode?
I wanted to use fastboot to flash a kernel with recovery and then flash the backup of my old ROM.
However, it doesn't worked. Only flashmode worked. So I flashed (really slowly, because of USB 1.1 ports of this old IBM laptop!) .141 and now the phone is living again.
Dunno why fastboot didn't work. Maybe because there wasn't any firmware on?
Antiga Prime said:
Ok, well, no idea about it being stuck in flash mode, but, isn't that exactly what you want? To flash a stock FTF you need to be in flash mode. As a matter of fact, you can even flash only the kernel of an FTF in flash mode, it wouldn't have a recovery, since it would be a stock kernel, but at least you could get a working kernel, if that were the issue, which it is not.
What are you doing to put your phone into fastboot mode?
Click to expand...
Click to collapse
DS-1 said:
Dunno why fastboot didn't work. Maybe because there wasn't any firmware on?
Click to expand...
Click to collapse
No because the whole point of fastboot mode is to be able to flash firmware related files. Fastboot mode, just as Flash mode, starts before the Android OS starts. If they depended on there being an OS installed it would defeat the whole point.
So I really dunno why it didn't work. Later I'll try to see if now fastboot is working again.
Antiga Prime said:
No because the whole point of fastboot mode is to be able to flash firmware related files. Fastboot mode, just as Flash mode, starts before the Android OS starts. If they depended on there being an OS installed it would defeat the whole point.
Click to expand...
Click to collapse
When you don't have a ROM installed,stock kernels recovery won't work. Flash CM 11s Kernel, you'll have recovery then restore you're backup
My phone unsuddenly bricked after I reboot my phone.Can't even boot into recovery cause Sony logo appear for a second and turned off.My phone even don't charge.I tried to flash stock rom via flashtool but phone not detected or after pressing vol down button nothing happened.I also tryed to use fastboot mode to flash boot.img but nothing happened though My phone can turn into fastboot mode.What should I do now?Senior XDA members please help.:crying:
Edit:how can i fix adb "device not found" issue?I installed all the necessary drivers but still not solved. Can't flash stock rom because vol down button not working but the button is fine.
Edit2:How can I fix adb driver issue that not recognizing my phone?
Problem solved!
Maybe died flash boot
Chum.zuizui said:
Maybe died flash boot
Click to expand...
Click to collapse
So is that mean my phone hard bricked?
Røbin said:
So is that mean my phone hard bricked?
Click to expand...
Click to collapse
Yes.i think so
Chum.zuizui said:
Yes.i think so
Click to expand...
Click to collapse
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Røbin said:
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Click to expand...
Click to collapse
Yes.good luck for you
hagar006 said:
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Click to expand...
Click to collapse
ZR driver exist in Sony developer website and I installed the driver but I don't know why my computer not recognizing my phone.My phone can turn into fastboot mode(blue light on when pressing vol up and connecting cable to pc) but when I type command "adb devices" the listed device is empty I mean no adb fastboot device found.I'm just asking the drivers are not working beacuse of windos 10?Actually when after I use custom rom I couldn't connect my phone to pc.So any driver can fix this problem?I searched really hard on google but couldn't find any proper sloutions.
Chum.zuizui said:
Yes.good luck for you
Click to expand...
Click to collapse
This isn't helping!
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
hagar006 said:
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
Click to expand...
Click to collapse
I know you are trying to help me but I tried everything and nothing is working.I installed driver from flashtool but still no clue why pc not recognizing my phone.My phone is like a live junk.My phone soft bricked many times and I could recover my phone with flashtool so I know what to do but this problem is way more confusing.I just need to know what is causing this issue.
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
hagar006 said:
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
Click to expand...
Click to collapse
Flashtool is the best tool to recover soft bricked phone I know but this problem is way more complicated.
Thanks that you tried to help me.I hope I'll figure it out some time later.
Røbin said:
This isn't helping!
Click to expand...
Click to collapse
I dont meant it like that .did you fix it
Chum.zuizui said:
I dont meant it like that .did you fix it
Click to expand...
Click to collapse
Unfortunately no.For some reason pc not detecting fastboot device even after I installed fastboot driver.
same problem plz help
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
pralay445 said:
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
Click to expand...
Click to collapse
My problem was created because local charger damaged my phone battery.So I couldn't turn on my device like yours.I replaced the battery and charger from Sony Center and now my phone is good as new.So Try to use other good battery(small or similer size that suites to your phone's battery pin)and see if your phone turns on without any issue.Then you can target the problem.
Hi. I decided to flash my Honor 3c with Cyanogenmod 12.1. My problem is that i need TWRP (now I have CWM) but i can't flash it to my device. I try to do it by SP Flash Tool, but after i connect my turned off device, I get this error:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H/W] Fail to download DA to baseband chip's internal SRAM!
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM. 2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side com port. 3. Monitor if power-drop occured in target side.
Click to expand...
Click to collapse
Where is the problem? I've tried with 2 different cables and 2 different computers
Ceranzuo said:
Hi. I decided to flash my Honor 3c with Cyanogenmod 12.1. My problem is that i need TWRP (now I have CWM) but i can't flash it to my device. I try to do it by SP Flash Tool, but after i connect my turned off device, I get this error:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H/W] Fail to download DA to baseband chip's internal SRAM!
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM. 2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side com port. 3. Monitor if power-drop occured in target side.
Where is the problem? I've tried with 2 different cables and 2 different computers
Click to expand...
Click to collapse
Is your phone in bootloader mode? Hold Vol down+power to enter fastboot mode and then connect your phone to PC.
If you are already doing that or the problem still persists and have an unlocked bootloader(which I am sure you have), try to flash twrp manually.
muradulislam said:
Is your phone in bootloader mode? Hold Vol down+power to enter fastboot mode and then connect your phone to PC.
Click to expand...
Click to collapse
When I do it, my phone just turns on normally.
How can I check if I have unlocked bootloader? I have unlocked it about 1 year ago, but I did full wipe yesterday.
Ceranzuo said:
When I do it, my phone just turns on normally.
How can I check if I have unlocked bootloader? I have unlocked it about 1 year ago, but I did full wipe yesterday.
Click to expand...
Click to collapse
Vol down+power should boot into fastboot. Turn off the phone, hold both until honor logo shows up, let go of power but hold vol down for about 5 sec more.
If still the same, Turn off your phone, connect USB cable to phone, hold Vol down and connect the cable to computer. It should boot into bootloader now.
If it can not boot into bootloader still, the last is to try adb but that is a bit lengthy.
In bootloader mode, it will be written on phone screen in red whether phone is locked, unlocked or relocked.
Wipe does not effect bootloader status so it's still unlocked imo.
muradulislam said:
If still the same, Turn off your phone, connect USB cable to phone, hold Vol down and connect the cable to computer. It should boot into bootloader now.
Click to expand...
Click to collapse
After this, I got this text on my screen:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite
Click to expand...
Click to collapse
Ceranzuo said:
After this, I got this text on my screen:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite
Click to expand...
Click to collapse
It did not say anything about phone unlocked in red?
muradulislam said:
It did not say anything about phone unlocked in red?
Click to expand...
Click to collapse
Nope. Maybe I was wrong and I have never unlocked it? I don't remember, but I did something when I was upgrading my phone to Android 4.4.2
Ceranzuo said:
Nope. Maybe I was wrong and I have never unlocked it? I don't remember, but I did something when I was upgrading my phone to Android 4.4.2
Click to expand...
Click to collapse
At least it should say, phone locked. Saying nothing is a phenomenon i never heard before but I usually go for newer versions. May be that's the case.
Anyways use adb to fire this command
Fastboot OEM device-info
To be sure if its locked or not.
To setup adb, download and install latest Android SDK, run the program and only download platform-tools.
Your phone is international variant and it came with locked bootloader, I am sure sp tools unlocked it coz otherwise CWM could not be flashed.
Right click platform-tools folder and select run command prompt window here and type the above command
If the bootloader is unlocked (it will tell you if it is), copy the twrp image to platform-tools folder and rename it to twrp.img and fire this command
Fastboot flash recovery twrp.img
And try to reboot into recovery after disconnecting from pc and simultaneously holding power+ Vol up.
edit: nevermind, i forghot about something...
muradulislam said:
If the bootloader is unlocked (it will tell you if it is), copy the twrp image to platform-tools folder and rename it to twrp.img and fire this command
Fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Should I do this when my phone is switched off?
Ceranzuo said:
Should I do this when my phone is connected to pc or not? Switched off?
Click to expand...
Click to collapse
When your phone is connected to your pc in fastboot mode.
Lemme know how did it go, will reply back in the morning. Hope everything works fine for you.
Sent from my PLK-L01 using XDA Labs
muradulislam said:
When your phone is connected to your pc in fastboot mode.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Ok, after I typed this command, there appeared this message in window:
<waiting for any device>
Click to expand...
Click to collapse
after this I reboot into recovery mode, but there is still CWM, not TWRP
Ceranzuo said:
Ok, after I typed this command, there appeared this message in window:
<waiting for any device>
after this I reboot into recovery mode, but there is still CWM, not TWRP
Click to expand...
Click to collapse
You dont have your phone drivers installed. Google Huawei USB drivers and install them or use hisuite to install drivers for your phone.
After driver installation, do the same process again.
My bad. I assumed you would have drivers already installed
Sent from my PLK-L01 using XDA Labs
muradulislam said:
You dont have your phone drivers installed. Google Huawei USB drivers and install them or use hisuite to install drivers for your phone.
After driver installation, do the same process again.
My bad. I assumed you would have drivers already installed
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
I have already installed many drivers from different sites. I will try with hisuite
Ceranzuo said:
I have already installed many drivers from different sites. I will try with hisuite
Click to expand...
Click to collapse
Hisuite is the best option. Even if that does not work (there is a chance of that), Google Kouch's universal drivers and install those.
May have to manually install dribers if nothing works.
Lemme know how did it go. Will get back to you in the morning if nobody else came along (but someone surely will before that).
Have a nice day/night depending on your time zone
Sent from my PLK-L01 using XDA Labs
---------- Post added at 07:41 PM ---------- Previous post was at 07:31 PM ----------
Lemme get my teacher for you
@DigiGoon
Sent from my PLK-L01 using XDA Labs
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Ceranzuo said:
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Click to expand...
Click to collapse
I was awake just for your post. I think I got the problem. You need fastboot drivers imo but I would have to read a bit before I can suggest how to go about it.
Am busy tomorrow but will try to get back to you in the evening (GMT+5 time zone).
Can never be 100% sure but still I am confident, your problem has a solution. Just bear with me a day or two
Sent from my PLK-L01 using XDA Labs
Ceranzuo said:
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Click to expand...
Click to collapse
Boot into recovery mode, no matter on which recovery are you on, and execute this command:
Code:
adb devices
And see the output, if it says something like:
Code:
**some_number** recovery
then it means there is no problem in the detection of your device by PC, if it does not, then check if the micro USB socket in the device is in good condition.
And I must ask: Are you able to do any operations on device via PC after connecting it?
DigiGoon said:
Boot into recovery mode, no matter on which recovery are you on, and execute this command:
Code:
adb devices
And see the output, if it says something like:
Code:
**some_number** recovery
then it means there is no problem in the detection of your device by PC, if it does not, then check if the micro USB socket in the device is in good condition.
Click to expand...
Click to collapse
I did it and it says some number and recovery
DigiGoon said:
And I must ask: Are you able to do any operations on device via PC after connecting it?
Click to expand...
Click to collapse
In "usb storage media" or something like that? Yes, I do.
Ceranzuo said:
I did it and it says some number and recovery
Click to expand...
Click to collapse
Okay, then it means that there is no problem in the connection. You are using SP Flash tool in which mode?
Sent from my PLK-L01 using Tapatalk
Hi,
Today i bricked/hard bricked my X620. I had TWRP 3.0.x, but i decide to flash with 3.1.x. I made it through by commands in windows using twrp.img file, and finished with fastboot reboot command, and phone died. Last info was something with the flow. I read many threads, and i found, that it's not alowd to finish flashing with this command. Now, im not able to switch on my phone, enter fastboot or TWRP, and when i conect my phone to pc, red light apears and i can hear a sound i win7 that something has been connected to pc, and disconnect, and connected, disconnected ...................., and nothing i happening with the phone. So, i'm not able to connect my phone to pc to make new flash by flash tool.
Can somebody help me with this problem????
Q
I can help you, just visit my blog
tickernel.tk
Present status
QbaQbaPL said:
Hi,
Today i bricked/hard bricked my X620. I had TWRP 3.0.x, but i decide to flash with 3.1.x. I made it through by commands in windows using twrp.img file, and finished with fastboot reboot command, and phone died. Last info was something with the flow. I read many threads, and i found, that it's not alowd to finish flashing with this command. Now, im not able to switch on my phone, enter fastboot or TWRP, and when i conect my phone to pc, red light apears and i can hear a sound i win7 that something has been connected to pc, and disconnect, and connected, disconnected ...................., and nothing i happening with the phone. So, i'm not able to connect my phone to pc to make new flash by flash tool.
Can somebody help me with this problem????
Q
Click to expand...
Click to collapse
Is it solved? I am also facing same problem.
BiswashKoirala said:
Is it solved? I am also facing same problem.
Click to expand...
Click to collapse
I am facing the same problem as well. Can anybody help pls??
No..I tried few solutions but the phone was still dead. So I bought a new phone.