Related
I use snapchat a lot. I can't go back to using it without four xposed modules that help make the experience better. I decided to help others who also want the best SnapChat experience know a working combination of software. The following is working for me -
-SnapChat 5.0.5.0 (non beta) http://download1221.mediafire.com/benp18oigf2g/68kx8f66odtw416/[email protected]_HD.apk
-Xposed 2.6.1 from xposed installer download section
-Keepchat 3.4.3 beta by craig https://dl.dropboxusercontent.com/u/15392985/KeepChat_3.4.3 Beta_Craig.apk
-SnapColors 1.2 from xposed installer download section. Newer versions also work but this one has a transparent background option
-SnapChat Full Caption 1.0 from xposed installer download section
-Snapshare 1.6.6a only visible in xposed downloads if you allow beta updates to be shown (default is stable versions only)
-Android KitKat 4.4.2
Supposedly the above combination of software should work with Snapchat version 5.0.11.0 non beta but I can't find a copy of it.
Original threads for these modules
Keepchat http://forum.xda-developers.com/xposed/modules/mod-keepchat-save-snapchats-t2556061 the beta I posted above is from post 986
SnapColors http://forum.xda-developers.com/xposed/modules/add-colors-to-snapchat-captions-change-t2716416
Snapchat Full Caption http://forum.xda-developers.com/xposed/modules/app-snapchat-text-caption-t2753861
Snapshare http://forum.xda-developers.com/xposed/modules/mod-snapshare-share-images-videos-t2577379
My rom is a Google Edition rom for the Galaxy S4 Global modified to run on the Tmobile M919 http://forum.xda-developers.com/showthread.php?t=2539361)
Thank you so much, i'm going to try this combo of versions:laugh:.
Introduction
Here is my first customised rom based on Marshmallow 6.0.1 by Sony!
The name 'AGGROSLIM' came from the fact that the rom has a rather aggressive debloat that consists of roughly 90 apps removed from the base rom! The rom also has nifty features such as pre-installed xposed modules (that I think will appeal to most users), a custom camera and lots more!
Images
Coming soon!
Features
-Fully Deodexed
-Aggressive Debloat (~90 apps, 220 apps in total on the ROM)
-SuperSU 2.76-System Mode
-TWRP 3.0.2.0 (RecRoot V4)
-SuperUser Mod
-Cyberian Camera IV
-Font Selector (via addon, see below!)
-Xperia X Themes
-Xperia X SystemUI
-Xposed Installer App and Modules (manual flashing of Xposed Framework Required: Link Here!)
Installation Instructions
First of all, backup your current rom! I am not responsible for any mishaps due to the inability of following instructions properly, although I will try to help you out!
Reboot in recovery
1. Wipe System, Data, Cache and Dalvik Cache.
2. Flash The Base Rom
3. Flash The AGGROSLIM Zip
4. Flash Xposed Framework
Downloads
BASE ROM
AGGROSLIM
AGGROSLIM V2 UPDATE ONLY
Addons
Dolby Atmos R6.5 http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
Font Selector http://forum.xda-developers.com/crossdevice-dev/sony/root-font-selector-igor-eisberg-t3367521
FAQ
The first few force closes of SemcAutoPowerOff should be the only ones you see!
Thanks To/Credits
If I forgot to add you, let me know!
@niaboc79
@jjwrongjj
@mkdmc
@rovo89
@IgorEisberg
@Wolfbreak
@Ben Ling
@Serajr
@C3C076
@zxz0O0
@svadev
@worstenbrood
Sony
Android
Google
If you wish to support my work and future developments you can now donate to me via the link here!
XDA:DevDB Information
Xperia Z2 AGGROSLIM ROM , ROM for the Sony Xperia Z2
Contributors
moman2000
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: N/A
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2016-08-29
Created 2016-08-29
Last Updated 2016-09-13
Changelog
V1 (29/08/16):
- Initial release
V2 29/08/2016
-Fixed incompatible version of Serajr Xperia™ Home X (MM), Correct version now installed!
V3 29/08/2016 CREATING AND TESTING
-1 ZIP TO RULE THEM ALL! The BASE ROM and AGGROSLIM have been combined into 1 ZIP, finally! The size of the ZIP should be smaller than both combined!
Upcoming: Settings wth custom menus!
Z5 Apps port
New Bootanimation
Reserved
Downloadind now......but i want screen shot... Too see the gap of between navigation bar and home app buttom... like in mx rom v8.6...that is cool.... See the screen shot
I have to download both.. Base rom (1.6gb) and Aggroslim(1.6gb)????
Shivam1754 said:
I have to download both.. Base rom (1.6gb) and Aggroslim(1.6gb)????
Click to expand...
Click to collapse
Yes, sadly you do, I know it's a big download but, I will figure a way to make it smaller somehow
Shivam1754 said:
Downloadind now......but i want screen shot... Too see the gap of between navigation bar and home app buttom... like in mx rom v8.6...that is cool.... See the screen shot
Click to expand...
Click to collapse
Here you go! They are identical, mine is a bit more because the home button is not as tall as the stock sony one(which you have)!
:good::good:
Nice one mate :good: but the needed files to be downloaded is much bigger still Im downloading it right now, keep it up mate
Why do I need the base ROM? As in why not make a standalone flashable zip?
hamzxoxo said:
Why do I need the base ROM? As in why not make a standalone flashable zip?
Click to expand...
Click to collapse
This will come later! (Probably today )
I was contemplating if people wanted 1 massive file or 2 medium sized files!
wowww
i will install later
thank you for hard work
0851311011 said:
wowww
i will install later
thank you for hard work
Click to expand...
Click to collapse
No problem , A new version is coming out, Only 1 zip to flash!
@hamzxoxo Currently compressing the files into the flashable zip, the files itself came to 3.9GB!
Maximum Compression is being used to make it as small as possible!
Hey if you debloated it, how come the size is still 1.6gigs ?
47un said:
Hey if you debloated it, how come the size is still 1.6gigs ?
Click to expand...
Click to collapse
So the BASE ROM is the rom itself 1.6GB The system alone is around 1.4GB
Then the AGGROSLIM ZIP contains the all the cool features and deodexed files which get copied to /system
Taking time! Will need to test too!
I am currently making an All-In-One Zip, so all you have to flash is 1 zip which has everything from the Base ROO and AGGROSLIM combined! It will take quite a while, but it is worth it!
Regards,
Mohamed
Waiting.....:
Shivam1754 said:
Waiting.....:
Click to expand...
Click to collapse
31 mins, Then I need to test, then upload! Then you have fun!
I think.. we will get link in tommorow morning or evening....
:good:Thanks to all for downloading (almost 400 ) my B06-slim² !:good:
As promised i made an AROMA ROM based on the B06-slim² version. For me it was more an exercise to complete this AROMA ROM for the G version.
As for the little spare time that i had i tried to make a version that has some features to add and to debloat further to scratch. It’s nothing too fancy but the first AROMA for our G model i think. I’ve enjoyed making it and perhaps i’ll make a new one if there’s enough feedback to add some more features in a next release :cyclops: !
It’s fully functional and tested. Smooth, no bugs (report when there is)
Hope you’ll E N J O Y !!!
Based on :
A2017G B06-slim² ROM
MiFavor 4.2
INSTALL : ( TWRP )
When you're on another ROM, stock (or even on B05-slim or B06-slim²) and you want a clean install just follow this procedure :
For other models, remove the first 2 lines (line1. "assert....". and line2. " abort....." in updater-script (in META-INF), save and rezip..
Or use this file : https://androidfilehost.com/?fid=962021903579490489 . Unzip it and drag the naked updater-script into the META-INF of the ROM with 7-zip and replace the existing one.
0. In case you want to reflash your own apps from B06-slim², backup your personal apps with f.e. TB, ZipMe... (or whatever)
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache / dalvik / data / system
3. Install : A2017G-N-B06-bootstack : https://androidfilehost.com/?fid=673368273298981646
4. Install : AROMA A2017G SL!M² DF!NR : https://androidfilehost.com/?fid=817906626617938421
5. Choose your stuff to add or debloat, let it RUN and reboot, wait…a minute…or 2…
6. Done ! No more no less :cyclops:
AFTER INSTALL :
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. When you added Youtube Adfree, you’ll have to go into PlayStore/settings and check “no auto updates” ! Otherwise the Youtube app will update again to that TERRIBLE ANNOYING ADD state!
INFO :
Stripped off : (like on B06-slim²)
Accuweather
Browser (ume)
Chrome
Email
Google Video, Films…
Maps
Touchpal (+languages)
Zte clock replaced by Google Clock
Zte calendar replaced by Google Calendar
ZTe File mananger replaced by ES File Explorer (imo a very good ROOT file manager)
….......
Baked into :
AdAway
ES
Google Calender
Google Clock
Minor Modifications :
Boot :
• Init.d enabled
• Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
AROMA Features to choose from :
• Debloat almost all remaining apps
• Choose SuperSU or Magisk (when installing modules aint working : just re-install Magisk in Manager and reboot)
• Add Google Dialer
• Add Google keyboard, Touchpal (activate in settings)
• Add Root Explorer Pro ( and remove ES )
• Center Clock
• Titanium Backup Pro
• Youtube Adfree Black Theme
• Extended Power Menu (normal white color)
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@Robbie P
@jeboo
@kenet (for his EPM and centerclock – Thnx !)
@benny3 (for his offered help and juice from BBTeam Rom for U-model)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
@franzyroy
@Robobob1221
@Ricky Divjakovski
ROM OS Version : 7.1.1 Nougat Mifavor 4.2
Source : ZTE stock-rom A2017GV1.2.0B06 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=817550096634795481
Kernel : stock
Version Information :
Status : Stable
Created : 2017-10-12
Any reason why this wouldn't work on the U version? I might give it a shot tomorrow.
pinkywinky said:
Any reason why this wouldn't work on the U version? I might give it a shot tomorrow.
Click to expand...
Click to collapse
You can flash Universal BL with U modem. See LOS14 Thread
https://androidfilehost.com/?w=files&flid=148464
Just give it a try. Should work too. First BACKUP !
Let me know
Which mifavor version? I assumed 4.2 since based from other.
Thanks!
Is the EPM Mod the colored or the normal version?
Maybe add xposed to additional features.
Spillunke said:
Thanks!
Is the EPM Mod the colored or the normal version?
Maybe add xposed to additional features.
Click to expand...
Click to collapse
Normal version. (i can add coloured version on a new version later on)
If there are enough requests I can make a new one with those additions either on this N-B06 or on a new N-B0X (if there ever comes a new one....)
raystef66 said:
Normal version. (i can add coloured version on a new version later on)
If there are enough requests I can make a new one with those additions either on this N-B06 or on a new N-B0X (if there ever comes a new one....)
Click to expand...
Click to collapse
No thanks, i like the white/normal version.
I hope there will be a new one. Android 8 would be awesome, but we will see... and again: thanks for your work!
raystef66 said:
You can flash Universal BL with U modem. See LOS14 Thread
https://androidfilehost.com/?w=files&flid=148464
Just give it a try. Should work too. First BACKUP !
Let me know
Click to expand...
Click to collapse
Ok I got it to work. however I kept getting "Erro:7" in TWRP. To fix I had to remove the first couple lines in the updater script file. Looks like the patcher wasn't recognizing my phone correctly.
All good though. Great ROM!
pinkywinky said:
Ok I got it to work. however I kept getting "Erro:7" in TWRP. To fix I had to remove the first couple lines in the updater script file. Looks like the patcher wasn't recognizing my phone correctly.
All good though. Great ROM!
Click to expand...
Click to collapse
Yeah, forgot to mention that. The first lines of updater-script has to be removed for other models to work. They're a safety check for G model.
So for other models, open Rom zip in 7zip. Go into META-INF to update-script, open with note++ and remove the 2 first lines ( line1 "assert..." and 2. "abort..."). Save and you're good to go :good:
Can someone please explain what the bootstack file is for? I have a A2017G stock rom. Do I need to use that? And do I flash it with twrp?
Hi
I came from RR and after restoring my apps and parameters from Google cloud, I have a problem with buttons on the notification panel. I can't organize buttons as I want maybe due to parameters from RR.
How can I solve that?
Could you check this app? It throws lots of warnings and I cannot use it. *on your rom ofcouse*
com.truelife.mobile.android.trueiservice
https://drive.google.com/file/d/0B9hMb-2Suv2TYW5DT1pUU0pPOEE/view?usp=drivesdk
I made a mistake, i have wiped system, data, internal storage, dalvik and cache for a clean install but now this ROM doesn't boot. I flashed bootsatck and ROM but doesn't boot. Lineage boot without problem.
What can i do?
fabro91 said:
I made a mistake, i have wiped system, data, internal storage, dalvik and cache for a clean install but now this ROM doesn't boot. I flashed bootsatck and ROM but doesn't boot. Lineage boot without problem.
What can i do?
Click to expand...
Click to collapse
check if system is choosed from mount section from twrp. if not select it
It seems i don't have boot partition. Lineage can work without this partition?
Just installed and it is fantastic. Thank you.
Only issue is the clock on the status bar is in the middle and sometimes is covered by other icons. Any solutions to this?
Sent from my ZTE A2017G using Tapatalk
Jeremy_Huang said:
Just installed and it is fantastic. Thank you.
Only issue is the clock on the status bar is in the middle and sometimes is covered by other icons. Any solutions to this?
Sent from my ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
Yes, in aroma installation set clock on the right side.
GP
Sent from my ZTE A2017G using XDA-Developers Legacy app
foggydew88 said:
Yes, in aroma installation set clock on the right side.
GP
Sent from my ZTE A2017G using XDA-Developers Legacy app
Click to expand...
Click to collapse
Can I just dirty flash it?
Sent from my ZTE A2017G using Tapatalk
Jeremy_Huang said:
Can I just dirty flash it?
Sent from my ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
Over itself? I think you can.
GP
Sent from my ZTE A2017G using XDA-Developers Legacy app
pinkywinky said:
Ok I got it to work. however I kept getting "Erro:7" in TWRP. To fix I had to remove the first couple lines in the updater script file. Looks like the patcher wasn't recognizing my phone correctly.
All good though. Great ROM!
Click to expand...
Click to collapse
hey buddy, i am installing it on 2017u, with lines removed but it isnt installing anything, just go into aroma and show installation but complete in just 2 seconds
and then say no os installed
please help
FOR OUR DEDICATED STOCK USERS :good:
Made an new AROMA ROM based on the A2017G-N-B10 stock version. Like the other slim roms it’s just based on stock with some additions and option to debloat further.
I added the JOJOC Battery Tweak in options that focuses on improved battery performance. I first used it in my MiFavor5.0 rom and gave me and other users some pretty amazing SOT. So therefore i implemented it here too and it gave me an average of +7h SOT.
It’s fully functional and tested. Smooth, no bugs. Magisk/SuperSU fully running without issues.
Hope you’ll E N J O Y !!!
Based on :
A2017G N-B10 STOCK ROM
INSTALL : ( TWRP )
When you're on another ROM, stock (or even on B05-slim,B06-slim² or B08…) and you want a clean install just follow this procedure :
Other models like A2017 and A2017U can flash this too. Only use Universal BL & your specific MODEM ! : https://androidfilehost.com/?w=files&flid=148464
0. In case you want to reflash your own apps, backup your personal apps with f.e. TB, ZipMe... (or whatever)
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache / dalvik / data / system
3a For G version flash : A2017G-N-B10-bootstack : https://androidfilehost.com/?fid=890129502657589611
3b For U and CN version flash Universal BL+your MODEM : https://androidfilehost.com/?w=files&flid=148464 ! Don't forget to flash twrp 3.1.1.0 or 3.2.1.0 afterwards !
4. Install : AROMA A2017(G/U/CN) SL!M➄ DF!NR : https://androidfilehost.com/?fid=818070582850499299
5. Choose your stuff to add or debloat, let it RUN and reboot, wait…a minute…or 2…
6. Done ! No more no less
AFTER INSTALL :
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. Go into PlayStore/settings and check “no auto updates” ! Otherwise the Youtube app will update again to that TERRIBLE ANNOYING ADD state!
3. Check with f.e. Kernel Adiutor, when you added JoJoc Tweak, if it’s running ok and see if values are matching like here : https://forum.xda-developers.com/showpost.php?p=75431784&postcount=2
3a. When on SuperSU, the JoJoc Tweak is enabled by default. So no worries.
3b. When on Magisk, just reboot into TWRP and flash the JoJoc Magisk Module : https://forum.xda-developers.com/showpost.php?p=75631796&postcount=169 and reboot. Or flash it within Magisk/add new module and search for your downloaded module on intSD/extSD. Check values whether tweak is running but it will.
4. ...
INFO :
Stripped off :
Accuweather
Browser (ume)
Chrome
Email
Maps
Touchpal (+languages)
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
ZTE File mananger replaced by ES ( you can replace it in aroma )
….......
Baked into :
AdAway
Google Calender (you can remove this later if you want)
Google Clock (you can remove this later if you want)
Youtube Black themed addfree
Minor Modifications :
Boot :
• Init.d enabled
• Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
AROMA Features to choose from :
• Debloat most remaining apps
• Choose SuperSU or Magisk
• Add Google Dialer
• Add Google Keyboard
• Center Clock
• JoJoc Battery Tweak
• ......
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@nfsmw_gr (for our work together on his JoJoc tweak , thnx !)
@kenet (for his centerclock script i recompiled – Thnx !)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
ROM OS Version : 7.1.1 Nougat MiFavor 4.2
Source : ZTE stock-rom A2017GV1.2.0B10 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=746010030569960734
Kernel : stock
Version Information :
Status : Stable
Created : 2018-03-08
Uploaded : 2018-03-10
Android Security Patch Level : 2018-01-05
....
raystef66 said:
....
Click to expand...
Click to collapse
Good work!!!
Dear raystef66! Could you build this A2017G B10 firmware with MiFavor 5.0 UI and add the M8 weatherwriter with MIUI8 to the Accuweather site. And do not delete application data:
Chrome
Email address
Maps
Touchpal (+ languages)
ZTE clock
ZTE calendar
ZTE File mananger.
It is possible to make a choice in Aroma install, ZTE application or Google.
[ROM][AROMA][A2017G/U/CN][B10 7.1.1.][stock] SL!M➄ DF!NR by raystef66
Flashed this new rom and works like magic. I chose Supersu, cause it was either that or Magisk. Since I am used to Supersu I decided to stick with it. TB likes it too.
Many thanks for your work.
Hello, I have a problem my download of the rom systematically stops at 96% how to do? Thank you
GAO161 said:
Hello, I have a problem my download of the rom systematically stops at 96% how to do? Thank you
Click to expand...
Click to collapse
Me tooo 96% ?
GAO161 said:
Hello, I have a problem my download of the rom systematically stops at 96% how to do? Thank you
Click to expand...
Click to collapse
mario32 said:
Me tooo 96%
Click to expand...
Click to collapse
Better check your connection ....
100% within 5 min
Can someone please test the Android personal dictionary with this rom? Slim4 is hands down my favorite rom for my A2017U. I'm wondering if it is worth the upgrade.
i installed, coming from darkrom 14.1 my phone will not connect to cell network. it keeps disabling and stating my phone is in airplane mode when i call. i have a a2017u
"Could not remount /system". reboot disemmcwp doesnt work.
I'm using magisk and try to convert apps to system apps with "/system/app mover"
Also strange problem: apps asking for root after a reboot.
Some suggestions or so?
I had the same problem.
It's only working with superSU.
If SuperSu is a sure thing, i think i will switch to SU and maybe switch back to magisk, if i cant find similar xposed modules or apps which i'm using with magisk.
In my case it's working without problems.
Xposed v89 is installed and the phone is encrypted.
Gruß in die Hauptstadt.
Magisk 15.3 + Magisk Manager 5.5.5 = root settings for apps survived a reboot
Magisk 15.3 / 16.0 + Magisk Manager 5.6.x = settings dont survived a reboot
I'm not sure whats happening, If i update magisk manager now.
strange, but magisk 15.3/5.5.5 is fine for me.
Grüße zurück ;D
EDIT: tried SU 2.82 but still "Could not remount /system". Sucks -.-
I can confirm troubles with downloads, 96% an each server on afh...
try some download manager I had the same problem and downloaded this file
Spillunke said:
Magisk 15.3 + Magisk Manager 5.5.5 = root settings for apps survived a reboot
Magisk 15.3 / 16.0 + Magisk Manager 5.6.x = settings dont survived a reboot
Click to expand...
Click to collapse
Grüsse :highfive: - here too the case is the missing logd. magisk and magiskhide need this from version 15.4 on to work propper. Correct me if i'm wrong This issue is not based on @raystef66 's great work here (thanks a lot!) but a ZTE issue.
hi, i can't enter in recovery. After tux led blinks orange a couple of time then nothing happens. i'm using twrp nfound latest.
digiNZM said:
Grüsse :highfive: - here too the case is the missing logd. magisk and magiskhide need this from version 15.4 on to work propper. Correct me if i'm wrong This issue is not based on @raystef66 's great work here (thanks a lot!) but a ZTE issue.
Click to expand...
Click to collapse
Ah okay. So i need to update step by step? 15.3 -> 15.4 -> 16.0?
I mean that problem still exists with 15.3 and Manager v5.6.3.
KNOW WHAT YOU ARE DOING ! I AM NOT RESPONSIBLE OF BRICKING YOUR DEVICE.....
FOR OUR DEDICATED STOCK USERS
Made an new AROMA ROM based on the A2017G-N-B12 stock version. Like the other slim roms it’s just based on stock with some additions and option to debloat further. You can add the JOJOC Battery Tweak later on (as it gave me some troubles to implement on boot) that focuses on improved battery performance. I
It’s fully functional and tested (not on battery SOT). Smooth, no bugs. Magisk/SuperSU fully running without issues.
Hope you’ll E N J O Y !!!
Based on :
A2017G N-B12 STOCK ROM
INSTALL : ( TWRP )
When you're on another ROM, stock (or even on B05-slim,B06-slim² or B08…) and you want a clean install just follow this procedure :
Other models like A2017 and A2017U can flash this too. Only use Universal BL & your specific MODEM ! : https://androidfilehost.com/?w=files&flid=148464
IMPORTANT !!! When coming from a (treble) rom or Oreo rom beware you'll loose your data because you have to revert back to Nougat by wiping/format. When you're on STOCK rom and twrp3210 (or latest) move on to 'FLASH'
For now I'm using the 'old' school method (not yet the Labs Mod).
So follow this to prepare on 'FLASH' :
1. Boot into your twrp (let's say you're on twrp3218treble)
1a. Wipe system/vendor/data/cache/dalvik
2. Flash official twrp3.2.1.0 (or latest) and reboot into recovery AGAIN (not into system !)
3. You will see you have to “cancel” and swype and you’ll have to format again
4. Wipe : /advanced/wipe/choose data/change filesystem to EXT4
5. Then go into wipe : wipe system/data/cache/dalvik to be sure
6. continue with 3a below and so on....
FLASH :
0. In case you want to reflash your own apps, backup your personal apps with f.e. TB, ZipMe... (or whatever)
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache / dalvik / data / system
3a For G version flash : A2017G-N-B12-bootstack : https://androidfilehost.com/?fid=1322778262903993157
3b For U and CN version flash Universal BL+your MODEM : https://androidfilehost.com/?w=files&flid=148464 ! Don't forget to flash twrp 3.2.1.0 afterwards !
4. Install : AROMA A2017X SL!M➅ DF!NR : https://androidfilehost.com/?fid=1322778262904005937
5. Choose your stuff to add or debloat, let it RUN and reboot, wait…a minute…
6. Done ! No more no less
AFTER INSTALL :
0. Use Jojoc Tweak for best battery result :
A2017X_JojocV2_SuperSU : flash in twrp
A2017X_Jojoc_magiskmodule_v2.1: flash in MagiskManager
A2017X_Jojoc_magiskmodule_v3.2: flash in MagiskManager
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. Go into PlayStore/settings and check “no auto updates” ! Otherwise the Youtube app will update again to that TERRIBLE ANNOYING ADD state!
3. Check with f.e. Kernel Adiutor, when you added JoJoc Tweak, if it’s running ok and see if values are matching like here : https://forum.xda-developers.com/showpost.php?p=75431784&postcount=2
4. If choosen Magisk leave it as Magisk 16.7 (other ones bootloop as known)
INFO :
Stripped off :
Accuweather
Browser (ume)
Chrome
Email
Maps
Touchpal (+languages)
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
ZTE File mananger replaced by ES ( you can replace it in aroma )
….......
Baked into :
AdAway
Google Calender (you can remove this later if you want)
Google Clock (you can remove this later if you want)
Youtube Black themed addfree
Minor Modifications :
Boot :
• Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
AROMA Features to choose from :
• Debloat most remaining apps
• Choose SuperSU or Magisk
• Add Google Dialer
• Add Google Keyboard
• Center Clock
• ......
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@nfsmw_gr (for our work together on his JoJoc tweak , thnx !)
@kenet (for his centerclock script i recompiled – Thnx !)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
ROM OS Version : 7.1.1 Nougat MiFavor 4.2
Source : ZTE stock-rom A2017GV1.2.0B12 / original ZTE upload/reuploaded : https://dl1.ztems.com/zxmdmp/downlo...K/ZTE/ZTE A2017G/452783/fota_B15_MR_B17_MR.up
Kernel : stock
Version Information :
Status : Stable
Created : 2018.09.15
Uploaded : 2018.09.15
Android Security Patch Level : 2018.07.01
-----
thx.
I heard chinese nougat released update also,can we get a build from that?
Thanks for this build.
Thank you!
I am currently on B10 slim, do you think I can dirty flash it over?
romitkin said:
Thank you!
I am currently on B10 slim, do you think I can dirty flash it over?
Click to expand...
Click to collapse
Preferable would be a clean flash though.
You can try but the aroma setup and endresult might differ although the initial aroma layout is quite the same.
The Jojoc module/zip has to be fashed afterwards now when you want to apply.
Do take a full twrp backup of your existing rom. You can always revert back
Many thanks for this! I decided to move over to LG V30 but want to put the Axon7 back to rooted stock & give to my wife.
hide bootloader msg zip problem
Since I'm planning on handing this over to my wife, who like things "simple" thought I would try your zip to hide the BL message at boot, flashed the zip , but it show ZTE boot screen twice, then goes right back into recovery. Any easy way to uninstall the zip, or do I need a complete do over?
thank you!
christoophat said:
Since I'm planning on handing this over to my wife, who like things "simple" thought I would try your zip to hide the BL message at boot, flashed the zip , but it show ZTE boot screen twice, then goes right back into recovery. Any easy way to uninstall the zip, or do I need a complete do over?
thank you!
Click to expand...
Click to collapse
Did you flash supersu or Magisk? Do that for starters again.
raystef66 said:
Did you flash supersu or Magisk? Do that for starters again.
Click to expand...
Click to collapse
Actually yes, before I flashed the BL zip I uninstalled Magisk using uninstall zip & reinstalled 17.1, then the BL zip.
Ended up starting over, realized during Aroma that I had uninstalled apps I wanted to keep! (lol better learn to read some day)
Still not sure why BL didn't work , as I'm on a A2017G like you.
Noticed that DTTO isn't working. Is that a setting somewhere or is it actually like that always? Been a while since on stock ROM...
Thanks for the rom. Will flash it the next days. <3
christoophat said:
Actually yes, before I flashed the BL zip I uninstalled Magisk using uninstall zip & reinstalled 17.1, then the BL zip.
Ended up starting over, realized during Aroma that I had uninstalled apps I wanted to keep! (lol better learn to read some day)
Still not sure why BL didn't work , as I'm on a A2017G like you.
Noticed that DTTO isn't working. Is that a setting somewhere or is it actually like that always? Been a while since on stock ROM...
Click to expand...
Click to collapse
"4. If choosen Magisk leave it as Magisk 16.7 (other ones bootloop as known)"
Hi !
Thx for this ROM. I was using B10 slim for a long time and decided to flash this over. So far I don't see much difference besides the
security level (which is good, B10 was a great ROM).
romitkin said:
Thank you!
I am currently on B10 slim, do you think I can dirty flash it over?
Click to expand...
Click to collapse
I dirty flashed B12 over B10, no issues so far.
regards
Hmm, I'm hitting the same snag on B12 that I did on B10 months ago. Trying to enter/use Personal Dictionary just won't work. Crashes settings. Been a long time so I forgot if a reason for that behavior is known.
LG G3 D851, PAC-MAN LP ROM, MultiROM, XDA Legacy
Hit another snag. Wanted to use Button Mapper which requires Accessibility. Any attempt at enabling Accessibility (for any app) causes the ROM to restart.
I'll grab logs later if needed.
Moto G5S Plus XT1806, Lluvia OS v1.4-NATURMADE, MultiROM, XDA Legacy
i saw this b12 mod on p4da https://4pda.ru/forum/index.php?showtopic=778560&st=2840#entry76984514
it has a 20band dolby atmos and magisk
Can someone grab the dolby file and put it on androidfilehost? i cant download files from that page.Only yandesk allows me
marcdw said:
Hmm, I'm hitting the same snag on B12 that I did on B10 months ago. Trying to enter/use Personal Dictionary just won't work. Crashes settings. Been a long time so I forgot if a reason for that behavior is known.
LG G3 D851, PAC-MAN LP ROM, MultiROM, XDA Legacy
Click to expand...
Click to collapse
marcdw said:
Hit another snag. Wanted to use Button Mapper which requires Accessibility. Any attempt at enabling Accessibility (for any app) causes the ROM to restart.
I'll grab logs later if needed.
Moto G5S Plus XT1806, Lluvia OS v1.4-NATURMADE, MultiROM, XDA Legacy
Click to expand...
Click to collapse
Hi Marc, can you flash this as a test to your PD.
As foor the ButtonMapper someone should test this (as I'm not on this one atm). Did the BM worked on G-B10 ?
What you also could do is flash the EDL G-B12 and see what happens related to the BM.
Predatorhaze said:
i saw this b12 mod on p4da https://4pda.ru/forum/index.php?showtopic=778560&st=2840#entry76984514
it has a 20band dolby atmos and magisk
Can someone grab the dolby file and put it on androidfilehost? i cant download files from that page.Only yandesk allows me
Click to expand...
Click to collapse
I take it it's one of the two files in the screenshot? I tried to get them but got 404 on the download page.
marcdw said:
I take it it's one of the two files in the screenshot? I tried to get them but got 404 on the download page.
Click to expand...
Click to collapse
i dont mean those 2.Follow the link i have posted (ZTE AXON 7 V1.2.0B12 DEODEX VERSION 2.0
Full firmware 7.1.1)
Updated the firmware V1.2.0B12
1. DEDEKS
2. It's completely cleaned from Google junk (you can install it from PlayMarket - it's the way it's left by the way)
3. Returned the stock El.Post + Weather widget ZTE
4. Implemented the Xperia keyboard
5. Installer was removed from the installer Magisk (put the knobs)
6. Stock DolbyAtmos + mixer
7. Introduced themes from the American version of B35
8. Removed signature verification of applications
9. Stock, net runoff
Addons
-20-band equalizer Dolby Atmos, in the sink 5 strips
i get same error when try to download.U need a account on p4da.I cant register cus of russian security check
Its a nougat dolby atmos with 20band equilizer like in dolby atmos oreo.
He also claims better battery life '' it will be better on autonomy, because there is no Guglokhma ''
What is Guglokhma? cant find anything much about it
raystef66 said:
Hi Marc, can you flash this as a test to your PD.
As foor the ButtonMapper someone should test this (as I'm not on this one atm). Did the BM worked on G-B10 ?
What you also could do is flash the EDL G-B12 and see what happens related to the BM.
Click to expand...
Click to collapse
Thanks. That zip worked perfectly. I can now go into and edit the dictionary. ?
Apologies for being unclear. No issue with Button Mapper. I'm unable to activate accessibility service for any app that may require it (BM, Greenify, etc).
First one selects the app and flip the on/off toggle at upper right. Confirmation dialog pops up detailing the services needed. When selecting OK the ROM soft reboots.
Could be a "just me" thing. ?
Can someone grab the dolby from this link? https://4pda.ru/forum/index.php?showtopic=778560&st=2840#entry76984514