Reverting to stock to sell phone. Which ROM for uk? - K3 Note Q&A, Help & Troubleshooting

Can someone please advise which ROM i need to use to fully revert my phone to stock so that I can sell it please?
It needs to be a UK based ROM.
Many thanks

f1ux said:
Can someone please advise which ROM i need to use to fully revert my phone to stock so that I can sell it please?
It needs to be a UK based ROM.
Many thanks
Click to expand...
Click to collapse
I dont know if exist a original rom frome uk, i only know the asia rom original, and you can find it in other page
Enviado desde mi Lenovo K50-t5 mediante Tapatalk

The phone is not officially available for UK
Any stock ROM on 5.1 will do the kob

Related

Need stock ROM for ZTE AXON ELITE

Hi,
bricked my phone.
Does anyone has a stock ROM for ZTE AXON ELITE?
Someone in The Netherlands who has it for me please?
TWRP is not longer working on my AXON.
edit
Stock ROM available!!
Thailand-ZTE-A2016-SD-card-upgrading-instruction-&-software-package(ZTE-(Thailand)-CO)-296310B0868ZTE_A2016V1.0.0B02
Working in all languages!!! Chose the download tab.
http://www.ztedevice.com/support/e109bda5-84c8-4f31-8e38-6c0d5d71d432.html
Thanks pici001
Dodger said:
Stock ROM available!!
Thailand-ZTE-A2016-SD-card-upgrading-instruction-&-software-package(ZTE-(Thailand)-CO)-296310B0868ZTE_A2016V1.0.0B02
Working in all languages!!! Chose the download tab.
http://www.ztedevice.com/support/e109bda5-84c8-4f31-8e38-6c0d5d71d432.html
Thanks pici001
Click to expand...
Click to collapse
That appears to be a tablet.
@Sub-Negro
I have a ZTE Axon Elite 3GB, on the backside of this device it says: Designed in the USA Model: ZTE A2016
My device was broke because after root i tried Xposed and this broke my phone.
I could only boot in the factory recovery.
After ADB with the stock rom from post #4 my phone is completely working again.
So the software is not for a tablet but for the ZTE Axon Elite 3GB Model: ZTE A2016.
Dodger said:
@Sub-Negro
I have a ZTE Axon Elite 3GB, on the backside of this device it says: Designed in the USA Model: ZTE A2016
My device was broke because after root i tried Xposed and this broke my phone.
I could only boot in the factory recovery.
After ADB with the stock rom from post #4 my phone is completely working again.
So the software is not for a tablet but for the ZTE Axon Elite 3GB Model: ZTE A2016.
Click to expand...
Click to collapse
Yes I was able to put that on Lux. So this particular rom seems to be based on the Chinese version that has a gold them and some Mi-Favour features. Wish somebody would release the American rom.
Due to V1.0.0B03 update was wrong and it did't work properly, I installed in my ZTE Axon elite A2016 the previous versión, from the mentioned link (http://www.ztedevice.com/support/e109bda5-84c8-4f31-8e38-6c0d5d71d432.html) which is exactly the same version I had before and it's working perfectly.
Rom B02 ZTE Thailand
After flashing thatvron thebphone is not able to get the B04 update , OTA, this ZTE Axon is such a messy phone... Never gad so muchbproblem with a phone.
---------- Post added at 01:48 AM ---------- Previous post was at 01:41 AM ----------
Crazyhat said:
Due to V1.0.0B03 update was wrong and it did't work properly, I installed in my ZTE Axon elite A2016 the previous versión, from the mentioned link (http://www.ztedevice.com/support/e109bda5-84c8-4f31-8e38-6c0d5d71d432.html) which is exactly the same version I had before and it's working perfectly.
Click to expand...
Click to collapse
Did u get the newest firmware? B04? Cuz since i flashed the B02 from ztedevice, thai firmware, i do not get this update and the firmware is still stock on B02 and all its bugs!
giocorrado said:
After flashing thatvron thebphone is not able to get the B04 update , OTA, this ZTE Axon is such a messy phone... Never gad so muchbproblem with a phone.
---------- Post added at 01:48 AM ---------- Previous post was at 01:41 AM ----------
Did u get the newest firmware? B04? Cuz since i flashed the B02 from ztedevice, thai firmware, i do not get this update and the firmware is still stock on B02 and all its bugs!
Click to expand...
Click to collapse
No, I didn't neither. I'm not sure if this is because Thai version can't receive updates or because it is not its turn yet. When a new update is launched, it is done in several steps. Firstly, 1% of users, some days later, 25 %, then 50%, 75% and finally 100% of users in about 15 days. It is done in this way just in case the new update takes mistakes so that it doesn't affect to all users. The last update was launched last Friday so, it means we need to wait for one week more to know if we are going to receive the update by FOTA. Anyway, Im trying to contact with ZTE support in order to clarify this matter. As soon as I know something, I'll post it here.
Don't worry too much. Sooner or later we will get the updates. You have to consider this device is being launched now. It will take them some time to organize the firmware support.
Enviado desde mi ZTE A2016 mediante Tapatalk
Crazyhat said:
No, I didn't neither. I'm not sure if this is because Thai version can't receive updates or because it is not its turn yet. When a new update is launched, it is done in several steps. Firstly, 1% of users, some days later, 25 %, then 50%, 75% and finally 100% of users in about 15 days. It is done in this way just in case the new update takes mistakes so that it doesn't affect to all users. The last update was launched last Friday so, it means we need to wait for one week more to know if we are going to receive the update by FOTA. Anyway, Im trying to contact with ZTE support in order to clarify this matter. As soon as I know something, I'll post it here.
Don't worry too much. Sooner or later we will get the updates. You have to consider this device is being launched now. It will take them some time to organize the firmware support.
Enviado desde mi ZTE A2016 mediante Tapatalk
Click to expand...
Click to collapse
Do you have any news regarding B04 update?
bingbinghaha said:
Do you have any news regarding B04 update?
Click to expand...
Click to collapse
Not yet. They have extended the B02 version to other countries in Europe and Asia, but regarding the B04 version we don't know anything yet.
Enviado desde mi ZTE A2016 mediante Tapatalk
Crazyhat said:
Not yet. They have extended the B02 version to other countries in Europe and Asia, but regarding the B04 version we don't know anything yet.
Enviado desde mi ZTE A2016 mediante Tapatalk
Click to expand...
Click to collapse
NFC is not working on B02. I guess I have to reinstall the original rom! BTW, Chinese version has 6.0 ROM on beta. The usable version is coming soon.
bingbinghaha said:
NFC is not working on B02. I guess I have to reinstall the original rom! BTW, Chinese version has 6.0 ROM on beta. The usable version is coming soon.
Click to expand...
Click to collapse
Yeah, I suspect the same but, how can you get the original version? I have no idea... Do you know it?
Enviado desde mi ZTE A2016 mediante Tapatalk
Crazyhat said:
Yeah, I suspect the same but, how can you get the original version? I have no idea... Do you know it?
Enviado desde mi ZTE A2016 mediante Tapatalk
Click to expand...
Click to collapse
Cuz I bought the phone from China, and I know Chinese. The official ZTE forum provides test ROM for beta testers, I am the one who has the access to the test rom. However it is not yet stable. I believe the marshmallow rom will be out this month, but combines with Chinese apps.
If the thailand rom works on Axon Lux, I believe the chinese rom will on Axon Elite. Chinese version is currently on V1.0.0B18
bingbinghaha said:
Cuz I bought the phone from China, and I know Chinese. The official ZTE forum provides test ROM for beta testers, I am the one who has the access to the test rom. However it is not yet stable. I believe the marshmallow rom will be out this month, but combines with Chinese apps.
If the thailand rom works on Axon Lux, I believe the chinese rom will on Axon Elite. Chinese version is currently on V1.0.0B18
Click to expand...
Click to collapse
I see.... But it is not available for us, right?
Enviado desde mi ZTE A2016 mediante Tapatalk
Crazyhat said:
I see.... But it is not available for us, right?
Enviado desde mi ZTE A2016 mediante Tapatalk
Click to expand...
Click to collapse
I think if the 6.0 rom is out for China, us will receive it soon. You can always get the Package through ZTE site.
bingbinghaha said:
I think if the 6.0 rom is out for China, us will receive it soon. You can always get the Package through ZTE site.
Click to expand...
Click to collapse
Yeah, ok. We will be tracking the process. Thank you
Enviado desde mi ZTE A2016 mediante Tapatalk
http://www.ztedevice.com/support/2ebfe35b-563b-4ae6-8eb5-9b2d1733c606.html
Hello, I would like to ask a question about ZTE axons elite 6.0, the latest version 6.0 update phone how ah?

[ROM] Stock BTV-DL09C100B009 European

Hi all,
just found, finally, the stock in the Huawei support site:
http://consumer.huawei.com/it/support/search/index.htm?keywords=btv-dl09&t=SupportSearch
Here you find the ROM and a document with an update to do the downgrade from Android 7.0!
At moment I'm not able to make a upload of the ROM but tryed to install after having messed a lot with other ROMs and the update proc worked flawlessy!
Edit: After the installation the (previously unlocked) bootloader was locked, like new
nicolap8 said:
Hi all,
just found, finally, the stock in the Huawei support site:
http://consumer.huawei.com/it/support/search/index.htm?keywords=btv-dl09&t=SupportSearch
Here you find the ROM and a document with an update to do the downgrade from Android 7.0!
At moment I'm not able to make a upload of the ROM but tryed to install after having messed a lot with other ROMs and the update proc worked flawlessy!
Click to expand...
Click to collapse
thank u very mutch you saved my mediapad EUROPIEN LTE
---
question
how to flash firmware for Huawei Mediapad M3 ? I know how to do it for galaxy with odin ?.
where I download firmware for Huawei Mediapad M3 ?
help please
Odin is only for Samsung phones.
Sent from my BTV-DL09 using Tapatalk
30adi said:
Odin is only for Samsung phones.
Sent from my BTV-DL09 using Tapatalk
Click to expand...
Click to collapse
yes
what use for BTV-DL09 ? help me please I am new to BTV-DL09
Download any firmware for Mediapad M3 and you will find a PDF file with all instructions for flash.
Sent from my Nexus 6 using Tapatalk
30adi said:
Download any firmware for Mediapad M3 and you will find a PDF file with all instructions for flash.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
ok thanks
where I download firmware for Mediapad M3 ?
carlo67 said:
ok thanks
where I download firmware for Mediapad M3 ?
Click to expand...
Click to collapse
Witch version do you have? European version has cust C100.
Sent from my BTV-DL09 using Tapatalk
30adi said:
Witch version do you have? European version has cust C100.
Sent from my BTV-DL09 using Tapatalk
Click to expand...
Click to collapse
android 6
Check about section in phone settings. I have BTV-DL09C100B303 for example.
Sent from my Nexus 6 using Tapatalk
carlo67 said:
android 6
Click to expand...
Click to collapse
any help please
I tried to help you, but if you do not have these informations how should we know witch tablet do you have?
carlo67 said:
any help please
Click to expand...
Click to collapse
If you have to ask this many questions, you probably shouldn't be rooting / unlocking in the first place...
Did anybody successfully update from BTV-DL09C100B009 to BTV-DL09C100B303? No problem?
Will be OTA still working when new FW will be released over OTA?
App Firmware Finder shows 3 update zip-files for my M3 to download. Do I have to flash with TWRP all 3 zips to unroot and update?
Regards Robert
Global ROM
Hey guys, I'm a complete noob when it comes to rooting my phone and stuff. I was wondering if anyone could help me out. I wish to purchase a M3 from China and was wondering how I could go about to install Global ROM so that I may be able to access Google services and set the default language in english. Will the above link help? Kudos to anyone that could give me a step by step guide.
MANY THANKS FOR HELPING OUT! CHEERS!
hi there im new also to the site.
I bought a tablet(HUAWEI MEDIAPAD M3 10.1 inch) from China and i want to change filmware to europe.
the model number is: BHA-ALL00C233B025.
What should i do first. thanks in advance for your time.
China Firmware to International firmware
Hey all, Just got my M3 from China.
Model No: BTV-W09
Build Number: BTV-W09C233B030
Was wondering how should I proceed if I wish to flash to a UK version of the software? Any guides out there?
Many thanks for your help!
Viknesh23 said:
Hey guys, I'm a complete noob
give me a step by step guide.
Click to expand...
Click to collapse
G.shark said:
hi there im new also to the site.
Click to expand...
Click to collapse
Both you are posting in the wrong place.
This a thread on the stock ROM
is also the subforum on "guides, news, discussions"
finally is the subforum for the Mediapad M3, unlikely for other variants.
First read the Forum rules then read it once more!

Nokia 7 Plus - How to roll back China Rom from Customized Global Rom in TA - 1062?

Dear developers,
Is there any way to get back Original China Rom in Nokia 7 Plus TA-1062?
I'm using TA-1062 with customized global rom. So, OTA updates stopped coming! Now I'm keen to get back Original China Rom which one receives regular OTA updates.
Is there any way to get back there?
It may help many users all over the world!
Please provide some information about that!
Thanks in advance!
You might want to check this thread for the update issue:
https://forum.xda-developers.com/nokia-7-plus/how-to/official-security-maintenance-release-t3813033
JohnSoapMacTavish said:
Dear developers,
Is there any way to get back Original China Rom in Nokia 7 Plus TA-1062?
I'm using TA-1062 with customized global rom. So, OTA updates stopped coming! Now I'm keen to get back Original China Rom which one receives regular OTA updates.
Is there any way to get back there?
It may help many users all over the world!
Please provide some information about that!
Thanks in advance!
Click to expand...
Click to collapse
I also need this plz somebody help us.

rom update help

hi guys i got chance to buy a k20 pro from a m8 (says he got from aliexpress) however the rom on it is 10.3.0.2 miui stable
question is how the hell do i update it ?
ive tried the update app but says is latest ? is there any newer
it also says for model number its a mi 9t pro ????
thanks
kinkyK said:
hi guys i got chance to buy a k20 pro from a m8 (says he got from aliexpress) however the rom on it is 10.3.0.2 miui stable
question is how the hell do i update it ?
ive tried the update app but says is latest ? is there any newer
it also says for model number its a mi 9t pro ????
thanks
Click to expand...
Click to collapse
You have a phone that came with an unofficial/fake global ROM. OTA won't work.
Your options are to install an official ROM or a known reputable custom ROM.
Official ROMs will have OTA working, custom ROMs will need you to update them manually.
Robbo.5000 said:
You have a phone that came with an unofficial/fake global ROM. OTA won't work.
Your options are to install an official ROM or a known reputable custom ROM.
Official ROMs will have OTA working, custom ROMs will need you to update them manually.
Click to expand...
Click to collapse
thanks so much for replying m8 where do i get a official rom ??
i assume its bootloader has been unlocked as on booting up says unlocked.
thanks again
kinkyK said:
thanks so much for replying m8 where do i get a official rom ??
i assume its bootloader has been unlocked as on booting up says unlocked.
thanks again
Click to expand...
Click to collapse
https://mirom.ezbox.idv.tw/en/phone/raphael/
Robbo.5000 said:
You have a phone that came with an unofficial/fake global ROM. OTA won't work.
Your options are to install an official ROM or a known reputable custom ROM.
Official ROMs will have OTA working, custom ROMs will need you to update them manually.
Click to expand...
Click to collapse
theincognito said:
https://mirom.ezbox.idv.tw/en/phone/raphael/
Click to expand...
Click to collapse
which is ok for use in the uk ?? thanks
also how do i flash it :good:
kinkyK said:
which is ok for use in the uk ?? thanks
also how do i flash it :good:
Click to expand...
Click to collapse
You can flash official Chinese or Indian ROMs. The Indian ROM is more or less a global ROM, but disables the NFC. The Chinese ROM only has Chinese and English languages, but setting English you will still find the occasional Chinese text creep in. Also it has more ads in system apps.
If you need NFC and want to stay on official ROMs, then it's Chinese. If you can live without NFC then the Indian ROM is a better option, it has the POCO launcher that includes an app draw, you'll not get any Chinese text and there's a lot less ads.
This post has the links for official ROMs, the second post in the thread gives a guide for installing.
https://forum.xda-developers.com/k2...irmware-10-3-8-0-9-6-13-t3939647/post79726515

Question Mi 12 pro firmware for Germany?

hey, since I'm very new to xiaomi and I've looked around, I noticed that there are a few roms What I'm getting at is I live in Germany my cell phone has the German standards my question is which rom belongs to Germany? since i currently have fie elite rom and i wil go back to stock without twrp updates etc so normal can someone help me?
To return to a stock rom, use Miflash.
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/

Categories

Resources