Pumpkin KD-C0346 flashed with MTCD. Now black screen - MTCB Android Head Units General

Hi,
i did it.
i flash since i got my first android device(Tmobile G1).
The first time i brick is 8 years since then.
i was so angry at the org. software yesterday that i went straight to xda and downloaded the first Firmware that i found.
It was the MTCD version.
Now i have a black screen. There are still some noises in the background and i think that the ResetButton is still working.
Can i unbrick my device?

slickyboy said:
Hi,
i did it.
i flash since i got my first android device(Tmobile G1).
The first time i brick is 8 years since then.
i was so angry at the org. software yesterday that i went straight to xda and downloaded the first Firmware that i found.
It was the MTCD version.
Now i have a black screen. There are still some noises in the background and i think that the ResetButton is still working.
Can i unbrick my device?
Click to expand...
Click to collapse
You will need to find out what MTC the unit is. Simply saying Pumpkin will not assist as they are a reseller. If you are able to get into recovery, you should be able to flash the stock firmware or aftermarket firmware to get you running again. Holding the power button and pressing reset works for mine to get into recovery.
http://www.autopumpkin.com/forum/viewtopic.php?f=18&t=14&p=17&hilit=KD+C0346#p17

I just tried to update my Xtrons PF75AA4A with the firmware on their site. Now my unit is black and i dont see any recovery! Wife is going to be pissed!!! Why put firmware on your site if it is not compatible! Please let me know any updates on this as i will do the same!

shawndak said:
I just tried to update my Xtrons PF75AA4A with the firmware on their site. Now my unit is black and i dont see any recovery! Wife is going to be pissed!!! Why put firmware on your site if it is not compatible! Please let me know any updates on this as i will do the same!
Click to expand...
Click to collapse
As above, what MCU version was it? MTC? Why would you install firmware on your device without checking its compatibility. If it is MTCB or D or even C, it is compatible. Perhaps if you had done your research prior to flashing you would not have this problem.

You're absolutely right. No idea, it was on their website for my model. Didn't think it would be an issue. Is there a way to flash from a computer?

Take a look over here, just un-bricked my Xtrons device. Make sure to flash the proper firmware. http://forum.xda-developers.com/and...d-kgl-unit-t3457538/post68656680#post68656680

slickyboy said:
Hi,
i did it.
i flash since i got my first android device(Tmobile G1).
The first time i brick is 8 years since then.
i was so angry at the org. software yesterday that i went straight to xda and downloaded the first Firmware that i found.
It was the MTCD version.
Now i have a black screen. There are still some noises in the background and i think that the ResetButton is still working.
Can i unbrick my device?
Click to expand...
Click to collapse
I think you should post in this thread for help :
http://forum.xda-developers.com/and...-mtcb-units-tested-courtessy-t3389906/page125
flashing the firmeware from this post may help restore your unit :
http://forum.xda-developers.com/showpost.php?p=68469248&postcount=877

Related

[Q] Stuck on logo screen suddenly. Ideas?

Hi,
Last night my Galaxy S was low on battery, and I kept trying to turn it on for it to die right away (it was working as expected I guess)
This morning after I charged my phone it wouldn't turn on at all! It loads to the logo screen, makes that jingle sound and then holds and doesn't turn on.
I can get to recovery and download mode.
I put OCLF on like 2 months ago, but haven't modded/flashed ANYTHING since. It is very bizarre how it just died.
I'm wondering what my options are now. Obviously I would rather not loose all my personal files. Since I can get into download mode, can I just flash a new firmware? I'd like FroYo anyway, but I haven't got a clue what to do.
Great start to the year – !
Cheers,
Mitch
EDIT: I just decided to try the "Clear User Cache" option and then reboot to no avail. Now I can't get back into recovery mode!?!? Download mode still works. Huhh?? Is this expected? Have I lose Recovery Mode entirely now? Crap.
seeeems like an odin flash via the download mode is the only way. There are a few tutorials on this site and even tut vids on youtube so you should be fine if you just follow everything they do (as long as it works for them of course)
How do I know what version to flash? I have read a few tutorials and they all have started with "Dial x and check you have y" etc. Obviously I can't do any of that.
What is the *safest* firmware I can flash?
My phone currently has some optus variety.
Please forgive the noodish question.
Mitch
Where are you located? And who is your provider?
Hi,
I'm in Sydney Australia and my provider is Optus.
Thanks
Hi,
I still can't get my phone working and am not clear how to proceed.
What would be the best firmware to flash to my Optus Galaxy S that bricked out of the blue? Should I just send it back to Samsung?
Thank You
m1tch37 said:
Hi,
I still can't get my phone working and am not clear how to proceed.
What would be the best firmware to flash to my Optus Galaxy S that bricked out of the blue? Should I just send it back to Samsung?
Thank You
Click to expand...
Click to collapse
Hey mate go to samfirmware and get I9000DTJG4 thats the stock optus rom once you get phone up and running then upgrade to 2.2.1.
Sounds like you'll need to do a flash of a stock rom..
By the way, the old oclf had some issues that might lead to system corruption (unfortunately I'm not very sure exactly what it does, or whether it could lead to this problem). I'd suggest getting one of the newer lag fixes available here when you do get your phone running again
tragusman said:
Hey mate go to samfirmware and get I9000DTJG4 thats the stock optus rom once you get phone up and running then upgrade to 2.2.1.
Click to expand...
Click to collapse
tragusman has got it right. Depending on what the issue is, you'll either recover nicely or your phone is toast. Flash the above stock firmware and give it a shot. Note that you'll likely loose your data and settings.
If you're new to flashing firmwares, check the great reference guide on where to find Odin and how to use it (this is the app you'll use to flash the above firmware).
http://forum.xda-developers.com/showthread.php?t=723596
After flashing, try getting into recovery mode. If you can look for an error message under the standard menu. Can't get to d/l mode? You're probably in trouble. Get into recovery and see an error msg? Post the error here or google it for a solution. No error msg? You're probably ok - restart the phone.
Good luck.
Thanks guys.
I'm about to try it now, but before I start potentially breaking my phone even more, I was just thinking: Could I just send it back to Samsung? Would they fix it, or identify right away I have changed something and void my warranty.
Mitch
m1tch37 said:
Thanks guys.
I'm about to try it now, but before I start potentially breaking my phone even more, I was just thinking: Could I just send it back to Samsung? Would they fix it, or identify right away I have changed something and void my warranty.
Mitch
Click to expand...
Click to collapse
If it's broke, you can't break it any more I've sent phones back in for support after flashing back stock firmware (flashing it after it "died").

[Q] Emergency Firmware Recovery

Hello
I hope i have posted in the right section and someone can explain too me if this is right or wrong.
I just downloaded the 2.0 version of samsung kies software,when i plugged my phone in it said i could do a firmware upgrade for my phone.
So of course i did so,i first done the backup which was an option in the process.Then pressed ok and it started doing its thing.
Well i left it and came back too see a green android guy on the phone and a message on laptop saying the update had failed and i need too recover the fail by going into emergency firmware recovery mode.
I did this(pressed yes) and it started doing its thing again and rebooted the phone,after it had done it said too disconnect and reconnect my usb cable which i did and the phone was back running again.
The question i have is what basically just happened?
I presume it was a fail on the firmware update since thats what it told me but on checking my stats it had done what it said it was going too and thats upgrade from CSC: JP5 to CSC: JP6.
So it said it failed but on the samsung kies software it now says the csc JP6 and i cant update any firther.
Im sorry i should maybe of checked the code better too be honest i didnt check the full version upgrade, i just thought ok firmware upgrade yup ill do that and flicked through the yes options til the upgrade started.
Thanks for any replies.I have a untouched samsung galaxy S by the way,i not done anything too it except installed apps and games.So no roms,no lag fix,no hacks at all.
Its been a coupleof days now since my post so hope its ok too comment in it again so maybe i can get some help.
Im not sure if my first post explained itself enough so if anyone has any questions i will be happy too answer them.I dont know if my phone will be affected long term but the fail or not.
Csc..what is this why had the software felt it needed too be changed from 5 to 6 ?
the fact it said it failed yet on checking i cannot update again and it has in fact changed from 5 to 6 as it said it would.All my added shortcuts on home screens went but the files stayed.
csc....has anyone also got the changed firmware like i have and gone through the failure too get it.
Im trying too add my own questions in the hope someone has some answers since i see many questions get answered in this section within no time,but mine seems too of stumped some.
thanks for replies guys it will settle my mind and i will of course try too find my own answers and if all else fails i will contact samsung and ask them what went wrong.
Hi,
I installed Kies today and connected my girlfriends cellphone, a Samsung Champ Duos (don't know if it's a phone only for the Philippino market)... Same here, started up first time and Kies prompted me to update the phone's firmware. I followed the steps, something went wrong and I was told to perform an emergency recovery.
I tried, but after 63% an error message appear telling me that something went wrong and "if the problem persists please contact support centre".
I've tried the recovery process maybe 20 times now and same every time. I have already sent an email to the support, but hoping someone here knows how to fix this in the meantime.
Thanks in advance!
Not sure Kies can be unreliable...
Have you tried another computer?
Try the recovery again but hold the usb cable in place, it may have a loose connection
Either way support should answer you shortly and they will sort it out, as it should be under warranty and kies messed it up. They will probably tell you to find your nearest service centre...
@Caz2k11 if you ever read this again and still haven't got your answer, it shouldn't have affected you that there was a problem installing in the first place.
CSC - there is a sticky on the the general section that describes most of this stuff but in brief i think its either country specific code or country service code, something like that. Really its only important if you have problems downloading things from the market, or reception/data related issues. Usually carrier related... Its worth checking you have the correct one when you update as it saves you from changing it later which results in a factory reset.
Ahh damn it...
Got a reply from their support this morning. They apologized and told me I have to send the phone to my nearest service centre. Great for me living in the province and I'll bet the closest service centre is located in Manila....
Does anyone know if the *original rom* is available somewhere on the internet?
Most of us do not use kies to update
You can fiind the latest original ROMs at samfirmware.com
jc
3d_jc said:
Most of us do not use kies to update
You can fiind the latest ROM ar samfirmware.com
jc
Click to expand...
Click to collapse
Hehe no ****
I'm running Andriod on my HTC Leo as well, but this is my girlsfriends phone, still warranty so I'll be a bit careful at the moment.
Have registered on the site mentioned above, not sure which file I'm going to use or anything, since I cannot start the phone to see the current firmware etc. The model no. is GT-E2652W and "SSN" is "E2652WGSMH", does that mean it's a E-series phone?
It means a few things ...
First of all, you are totaly at the wrong place since this forum section is for Samsung Galaxy S, and you Champ Duo , well, isn't a Galaxy S !
Second thing is that this forum, as well as samfirmware, deal mostly with Android phones, which your isn't, I believe. It does somehow look like, but isn't.
Sorry I can't help more
jc
3d_jc said:
It means a few things ...
First of all, you are totaly at the wrong place since this forum section is for Samsung Galaxy S, and you Champ Duo , well, isn't a Galaxy S !
Second thing is that this forum, as well as samfirmware, deal mostly with Android phones, which your isn't, I believe. It does somehow look like, but isn't.
Sorry I can't help more
jc
Click to expand...
Click to collapse
Yes, I'm awared of that. Found this thread when I Google-searched "samsung emergency recovery".
Sure, no arm done, it's just that non android phone have a different way to recover. I did a couple of googling too, but must admit I did not find a great deal of information either,
Sorry and best of luck for bringing your device back to happiness.
jc

[Q] Bricked NTT DoCoMo Japanese Tab

Ok here goes... This is my first thread post here but I am in serious need of help.
I have searched and searched the forums for a hopeful answer but I have found it difficult to find the answer I seek.
So here is the story:
Bought a GT second hand from Akihabara in Japan which was locked to NTT DoCoMo. I was using it as a WIFI only Tab and all was wonderful till my IT brain decided it could be better and I began to tinker.
I had been looking around for a way to make my Australian Virgin Mobile SIM to work on the tab and found a lot of good answers but nothing that would make it work.
I then had the brilliant idea to change the firmware with a European firmware so I could get all the features enabled from a fresh start. Which is where it all went wrong.
I first tried to flash the tab using Odin 1.7 with the P1000XXJK5 euro firmware from samfirmware.com
This failed and left my tab with the picture of a phone and a pc with a dotted line and in between them an exclamation point in a triangle.
After a lot of fiddling (I dont remember what I did but I managed to get rid of that screen had something to do with retrying the flash and it was very late last night at this point) I managed to try again but Odin just kept failing on running the updated firmware.
I then decided that it would be a good idea to run the Rotohammer firmware by following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=895827&highlight=sc-01c
This is where I once again received errors from Odin and now my tab is somewhat bricked.
I tried reflashing but same errors every time. (I currently dont have the errors from Odin but I will update my post when I get home)
I can still get to the downloading screen (Yellow triangle with the Android digging) so I am hopeful all is not lost.
So now you have heard my sob story I will ask two questions....
1. Has anyone actually successfully flashed a Japanese model Tab?
2. My only thought/hope at the moment can anyone direct me to an original NTT DoCoMo firmware so I can at least go back to having WIFI only Tab?
Thanks in advance if you can help
Alex
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
I am searching the an original NTT DoCoMo firmware.
Electroboy said:
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
Click to expand...
Click to collapse
Oz the model is SC-01C it has a build date of 2010/12
I was thinking considering I can get into the build/download screen maybe trying an emergency firmware recovery using Kies.
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
I'm going to give the original firmware a go today at lunch time and I will let you know how I go. Thanks anyways for the link if all goes well I'll look at possibly trying the the koxudaxi kernel.
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
UPDATE: Still getting the same problems using heimdall to flash the tab. Any suggestions as to what I could do next?
Recovering a Docomo Tab
I'm currently running Overcome v1.1.3 ROM and richardtrip's V15 kernel on my SC-01C.
acont said:
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
Click to expand...
Click to collapse
You're getting this error from Heimdall, right? Have you tried Odin 1.7?
Here's how I recovered my Tab using Odin:
1. Following the instructions in http://forum.xda-developers.com/showthread.php?t=895827, specify the P1_add_hidden.pit in the PIT button and select Re-Partition.
2. Specify the stock Docomo ROM when pressing the PDA button.
3. Ignore the Phone and CSC buttons, as the stock ROM already contain these items.
You should be able to restore your Tab to stock settings using this procedure.
If this doesn't work, you might want to check if the USB connection to your PC is ok, and if everything necessary to run Odin is installed on your PC.
Bugger!
Well thanks for your help all of you but I think I have just made matters worse.
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
I can't boot into download mode and I can hold down the power button till I turn blue in the face... So as Bones would say "It's dead Jim"
Unless any of you have anything else I could try as a last ditch shot I might just have to ship it back to Japan and get them to fix it or maybe try Samsung here in Oz.
Serves me right
Thanks again.
acont said:
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Click to expand...
Click to collapse
What exactly happened?
The SC01COMJK2 firmware does not contain protected bootloaders, by the way.
acont said:
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
Click to expand...
Click to collapse
I've heard about this happening when the battery runs out. Try connecting the Tab to your PC (not your AC adapter) and let it trickle-charge for an hour or so. If successful, you should see the download screen.
fury1sog unfortunately that didnt work
spoke to the samsung repairers here in Aus and they said they can take a look at it for me hopefully bring life back into my unit and then I will never touch it again
Any thoughts?
Hopefully this post is still being looked at but has anyone got any ideas as to what I could do before I fork out $374 to my tab repaired by Samsung Australia?
According to the repair guys its a faulty board (not an idiot that tried to flash it) and needs to be replaced. Not sure if this is worth my trouble considering I could buy a brand new tab for $599.
There is a positive out of this, the MB will be an Australian MB and I will have a working "Australian" tab instead of the Japanese version.
Considering the unfortunate tragedy in Japan I am not sure I should try and get my friend in Japan to fix it for me.
Thoughts anyone?
I know someone who can unlock it, I have mine unlocked by them.
I was afraid of flashing it myself so I paid to have it unlocked, cost was $20.
I think you better go for the MB replacement, it's cheaper.
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
zetsurin said:
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
Click to expand...
Click to collapse
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
also used heimdall. starts downloading. but stuck almost at the end of the tab's progress bar.
argh...
me too ! samsung galaxy tab m180 Korean .... huhu
What ROM is best for a SC-01C?
Hi Guys
I picked up a 2nd hand SC-01C from Yahoo Auction, and am wondering what the best ROM to use with it is...
Looks like this guy has got an Overcome ROM on it OK, (http://chaki-ramone.blogspot.com/2011/06/galaxytabsc-01cgingerbreadromovercome.html), so I wonder if the latest version (http://forum.xda-developers.com/showthread.php?t=1205990) will work OK - anyone tried? (is the SC-01C a GSM-based model??)
I'm not going to use a SIM with it, so I'm not bothered about unlocking - but just want it rooted & want a good balance between speed & battery life. If you were going from scratch with an SC-01C, what would you do? Any suggestions greatfully received!
Thanks in advance?
PS - I'm an iPhone / iPad / Ideos 8150 / Notion Ink Adam owner, all jailbroken / rooted. So I'm not scared about rooting per-se, just worried about trying something that will not work because of anything docomo has done to the Tab!
Acont you could be coma bricked try pluginging it into THE MAINS for at least 4 hours if nothing come up your hard bricked.
Sent from my GT-P1000 using XDA Premium App
zetsurin said:
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
Click to expand...
Click to collapse
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
huylang280285 said:
me too ! samsung galaxy tab m180 Korean .... huhu
Click to expand...
Click to collapse
unbricking M180 is done long time ago
Here is a video for you
http://www.ort-jtag.com/blog/?e=15
udhtari said:
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
Click to expand...
Click to collapse
What about this P1000R , what is special or different ?
I know P1000L was for south american edition !
lemmy_0 said:
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
Click to expand...
Click to collapse
Docomo solution is very soon !
That TAB need JTAGging thats the only way ..
I have the good and dead device in hand , we will release for ORT-JTAG probably this week ..
Best Regards
Oz.

So... i bricked my Galaxy Tab... HELP!!!

So I was retarded and followed the instructions (or started to) on androidadvices dot com/how-to-update-samsung-galaxy-tab-to-stable-gingerbread-2-3-3-firmware
My Tablet will not boot past the T-Mobile logo.......... they are being assholes and telling me i need to deal with samsung ......... who told me it would be 6-8 weeks for a replacement........ is there ANYONE out there that can help me with just resetting it???
If you can get to the T_Mobile logo, you probably have a working bootloader and that mean you just need to flash the correct firmware for you device.
In short words, go to samfirmware.com and download the right firmware for your tablet model.
Once you have the firmware, flash them to your tablet with 'odin' (flash software, that you can also get in the mentioned website).
This should solve the problem.
If this works I will love you.
So i am obviously more retarded than I thought pedrohfsd ........ I have an SGH-T849 and i cannot FIND the firmware on that site..... seriously? UGH
pm me i'll tell you what to do , with th stock firmware for Tmobile , i helped someone before 2days he had same tab with you ) and same problem
pedrohfsd said:
If you can get to the T_Mobile logo, you probably have a working bootloader and that mean you just need to flash the correct firmware for you device.
In short words, go to samfirmware.com and download the right firmware for your tablet model.
Once you have the firmware, flash them to your tablet with 'odin' (flash software, that you can also get in the mentioned website).
This should solve the problem.
Click to expand...
Click to collapse
You sir, are brilliant.
I wasn't able to locate the firmware on the samfirmware.com but I DID find it on XDA from another user. Put phone into download mode... waited till the little box in Odin turned yellow and loaded that badboy on there. After about 5 minutes it was back into the 2.2 OS again. The only problem that I had was with programs that had been installed before and loaded at boot (Just had to uninstall / reinstall) But for the most part its back to the way it was.
Thanks so much for your help!
You too Kosh, as I am sure you were going to walk me through exactly what I fumbled through on my own (I'm lucky I didn't blow anything up haha)
NO more attempts to get 2.3 on this badboy!
Thanks again all <3
I'm glad to hear that KalKainen, the first time i soft bricked my phone i got desperate too.
But after some weeks i saw the inumerous progressions that people develop in custom roms here in xda, and flashed the whole thing again =P.
pedrohfsd said:
I'm glad to hear that KalKainen, the first time i soft bricked my phone i got desperate too.
But after some weeks i saw the inumerous progressions that people develop in custom roms here in xda, and flashed the whole thing again =P.
Click to expand...
Click to collapse
Amen man..... desprate is about right.. haha... now if i could only figure out why i have to CONSTANTLY reboot it in order to restore network service (Even though I have 3g and full bars... no text messages send / come in and programs that use data error out... ) I would be happy. This has been happening for the last 4 months badly enough that I can have to reset it 10 times in a 2 hour period >.< I cant even put it into flight mode.... but after I TRY putting it into flight mode and then reboot it... it comes BACK in flight mode.... I hoped the reinstall of the firmware would fix it.. but alas..... still plagued. AT LEAST IT WORKS THOUGH!!

[Q] Random lines through screen after update to v20

So i just updated to V20 Europe Open following this tutorial and the update seemed to go through fine, rebooted, and new firmware installed. After finally setting up the phone as i like, i let it sit to synchronize all my contacts and what not. When i pushed the power button to wake up the phone, there were these random lines over the entire screen, look like blinds.
When i do a battery pull or reboot its back to normal, but everyime i let the phone sit for a couple of minutes and then wake it up, i get the same screen..
Ive attached two screen shots
Any ideas on how to fix this? Thanks.
I had the exact same problem, I didn't find any solution so I had to revert back to v10.
Which v20 did you install? The Portuguese one?
Mottz said:
I had the exact same problem, I didn't find any solution so I had to revert back to v10.
Which v20 did you install? The Portuguese one?
Click to expand...
Click to collapse
Use the same method that you use to roll back (LGFlash Tool) and install Euro_open V20A.
There is no difference between the euro and PT.
All needed files you can find them here:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
RuedasLocas said:
Use the same method that you use to roll back (LGFlash Tool) and install Euro_open V20A.
There is no difference between the euro and PT.
All needed files you can find them here:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Click to expand...
Click to collapse
I tried the HK version as well, still having the issue. Do i just need to roll back to V10? Is it a software issue? How come very few people have it if all the versions are the same..?
faraband said:
I tried the HK version as well, still having the issue. Do i just need to roll back to V10? Is it a software issue? How come very few people have it if all the versions are the same..?
Click to expand...
Click to collapse
Might just be a bad flash.
By flashing with LGFlash Tool you don't need to roll back.
Just make sure that you have official firmware, don't use leaked.
To be a hardware problem, you should have it in ICS too...
RuedasLocas said:
Might just be a bad flash.
By flashing with LGFlash Tool you don't need to roll back.
Just make sure that you have official firmware, don't use leaked.
To be a hardware problem, you should have it in ICS too...
Click to expand...
Click to collapse
I tried 3 different routes to get V20A Euro installed, all the installs were successful but the screen issue is still there:
1. LG Flash Tool
2. KDZ_FW_UPD
3. Using LGKDZ hack and LG PC Suite
All of these successfully got V20A installed, but none solved the lines on the screen. I made sure to wipe before and after each install..
Any other ideas?
Perhaps screen is faulty ?
leolipop said:
Perhaps screen is faulty ?
Click to expand...
Click to collapse
I had no issues when on V10H, and nothing happened to the phone during the upgrade, just remained on my desk. When i revert back to V10H i have no issues also. I tried LGFlashTool to roll back to V10H and now have LG PC Suite find and upgrade the phone on its own, will see if that makes a difference...
Thanks
I see...I ll inform a member in another forum whereas he had the same issue.
faraband said:
I had no issues when on V10H, and nothing happened to the phone during the upgrade, just remained on my desk. When i revert back to V10H i have no issues also. I tried LGFlashTool to roll back to V10H and now have LG PC Suite find and upgrade the phone on its own, will see if that makes a difference...
Thanks
Click to expand...
Click to collapse
If after official upgrade doesn't work, I recommend you to take it to LG Service.
RuedasLocas said:
If after official upgrade doesn't work, I recommend you to take it to LG Service.
Click to expand...
Click to collapse
So i am currently in the US, bought the phone brand new unlocked from ebay. I called LG Support, and the rep said that since the phone is international, they cant do anything.. I would have to contact international LG Support to get help..? wtf
faraband said:
So i am currently in the US, bought the phone brand new unlocked from ebay. I called LG Support, and the rep said that since the phone is international, they cant do anything.. I would have to contact international LG Support to get help..? wtf
Click to expand...
Click to collapse
Same problem here. Not in such scale but I think it is the same. I had just bought the phone and when I did the update from the official site of LG te problem occured. I have sent the phone to service and I am waiting for it. Does anybody know if that phone has an international DOA??
Went to service, came back with the same problem. They had to replace it with a new one. I want risk to update again. Will stick with 4.0.
I just got a similar problem but much worse seen in the photo below attached my phone was working for a few weeks before this problem came as i was sat reading it, it just appeared while the screen was on. it also appears at boot and in cwm does this happen for you guys coz i think it's more a hardware problem for me.
Not sure what is causing it, but i went to 4 different repair stores, and none of them could figure it out. I sent it in for warranty, will report back what happens..
I had the same problem on my screen all the time , It's gone now for some reason, only thing i did is relocked the bootloader and unlocked it again since then it been running without any problems for almost a month now.
I remember i used the old method to unlock the bootloader , relocked it and i ran stock v20a(with locked bootloader) for like a month without any problems so i decided to try again , i used the official lg unlock method and now even on other roms it seems fine.
This bug is really annoying though hope ya'll get to fix it .
Try download an other v20 firmware, if that doesnt work, i can recommend superxe rom, its realy fast and stable.
Sent from my LG-P880 using xda app-developers app
I also think that it is a software problem because mine with the original Poland Rom 4.0 worked just fine.After one day of use I decided to upgrade to 4.1 from the original site of LG in Greece.this caused the problem.I believe that the flash caused some malfunction to the gpu.My cousin has the same exact phone for a year now but has never that problem.Maybe LG should give it a look because it seems pretty serious.
Sent from my LG-P880 using xda app-developers app
I had the same problem with V20A! but now I installed the CM10.1 nightly and also with the cyanogenmod appeared the same problem!! is a hardware problem? :crying: how can I fix?? Help me!! :crying:
this is the screenshot of CM10.1! I cut a little the picture!
Sent from my LG-P880 using xda app-developers app
is anyone elses permanently there. since it came on on mine it has never gone off including when booting up, in cwm and whilst in software recovery from flashing original bootloader. the other thing is screenshots look fine when on my pc.

Categories

Resources