Hello everyone,
I flashed my galaxy tab by following this link http://forum.xda-developers.com/showthread.php?t=932082
Do not worry it worked well.
I wanted to flash my Galaxy tab version P1000XWJMK.
But then I had a problem with Odin.
To download the Pit, no problem:
<ID:0/008> Removed!
<ID:0/008> Added!
Odin <ID:0/008> v.3 engine (ID: 8) ..
File <ID:0/008> analysis ..
<ID:0/008> SetupConnection ..
<ID:0/008> Initialzation ..
Set <ID:0/008> PIT file ..
<ID:0/008> DO NOT TURN OFF TARGET!
Get <ID:0/008> PIT for mapping ..
Firmware update <ID:0/008> home ..
<ID:0/008> Removed!
Completed <ID:0/008> ..
All threads <OSM> Completed. (Succeed 1 / 0 failed)
<ID:0/003> Added!
It was after and it stuck like that ....
http://imageshack.us/photo/my-images/837/29119539.jpg/
I wanted to put the FW Overcome, it's like ...
Do you have an idea?
http://forum.xda-developers.com/showthread.php?t=1133590 check here
My tablet is in this state there:
2- Soft Brick: Unit powers up, reaches a "download" or service screen, visibly charges but does not boot into an OS. Crashing, hanging etc. all apply here. It is easy to recover a device from this state so long as one has access to a firmware that was designed for the device and the ability to flash said firmware. (SpaceMoose1)
Click to expand...
Click to collapse
ok then , why you posting here instead not there ? ? and pls i posted the steps to recover this issue .. pls follow the guide posted in the thread . carefully
btw , can you confirm me your tab GSM or no ? ? ? ?
I have a tab gsm.
ok then go again to my thread and follow the steps carefully all the best buddy
A- GSM Tabs : All You Need Is Stock Rom + PIT Via Odin You Can Recover It By the Following Steps :-
1- download your Firmware from .samfirmware.com P1000XWJMK ??
2- Download Odin From The Attachment (this software you
need to Use it To Recover You Tab
3- Put Your Tab Into Download Mode
4- your tab will boot into download Mode plug your tab to your Pc\laptop after you make sure the drivers are installed and open ODIN
5- in ODIN Put In PDA Section ( TAR ) The stock Rom you
downloaded,
files:
-GT-P1000-CSC-PHNJM5.tar.md5 (CSC)
-MODEM_P1000XXJMA.tar.md5 (modem)
-P1000XWJMK-REV03-ALL-CL900323.tar.md5 (PDA) ?
PIT section put the (gt-p1000_mr)
attached with Odin IN PIT SECTION
check re-partition?
6- Hit the start button , wait until the process Finish, your
tab will reboot to confirm the new System.
In Case after ODIN finished and Reboot back into
Download Mode Unplug Your tab and Force it to
Boot To Continue the process .
GSM (DONE)
LMAO ... thats why you gonna brick your tab ...
i said follow the steps , after you download the damn rom from firmware ... extract the folder inside the ZIP inside the zip you'll found TAR ( AS ZIP ) but TAR ... put it in PDA section ... and GSM is international .. i can't list every country Firmware code .. ... rofl
OUARZA said:
A- GSM Tabs : All You Need Is Stock Rom + PIT Via Odin You Can Recover It By the Following Steps :-
1- download your Firmware from .samfirmware.com P1000XWJMK ??
2- Download Odin From The Attachment (this software you
need to Use it To Recover You Tab
3- Put Your Tab Into Download Mode
4- your tab will boot into download Mode plug your tab to your Pc\laptop after you make sure the drivers are installed and open ODIN
5- in ODIN Put In PDA Section ( TAR ) The stock Rom you
downloaded,
files:
-GT-P1000-CSC-PHNJM5.tar.md5 (CSC)
-MODEM_P1000XXJMA.tar.md5 (modem)
-P1000XWJMK-REV03-ALL-CL900323.tar.md5 (PDA) ?
PIT section put the (gt-p1000_mr)
attached with Odin IN PIT SECTION
check re-partition?
6- Hit the start button , wait until the process Finish, your
tab will reboot to confirm the new System.
In Case after ODIN finished and Reboot back into
Download Mode Unplug Your tab and Force it to
Boot To Continue the process .
GSM (DONE)
Click to expand...
Click to collapse
-GT-P1000-CSC-PHNJM5.tar.md5 (CSC)
-MODEM_P1000XXJMA.tar.md5 (modem)
-P1000XWJMK-REV03-ALL-CL900323.tar.md5 (PDA) ?
Click to expand...
Click to collapse
OMG .. those things are inside the TAR that should be be putting in PDA section ..
rofl ... do not extract the damn TAR ..
PIT section put the (gt-p1000_mr)
attached with Odin IN PIT SECTION
check re-partition?
Click to expand...
Click to collapse
after you PUT THE PIT IN PIT SECTION .. your RE-PARTITION WILL check by itself .. you do not need to check it ...
Small question, where can I find the kernel of the official rom
P1000XWJMK?
why the heck you want the kernel ? ? ? . i'm ensure you , u going to brick it hard brick .. congrats from now .. go check the hecking video i post in my thread that i gave u ... just because of you i swear i did it !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Asia Samsung P1000 Firmwares ????
I'm French.
k0sh said:
why the heck you want the kernel ? ? ? . i'm ensure you , u going to brick it hard brick .. congrats from now .. go check the hecking video i post in my thread that i gave u ... just because of you i swear i did it !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Click to expand...
Click to collapse
Calm down a little buddy, we all get frustrated by people not doing their research, but WOW that's a lot of !!'s
I am a bit lost, sorry.
Is this the official kernel?
http://forum.xda-developers.com/showthread.php?t=924654
go go brick your tab .. this is custom KERNEL for The Holy of moly ................................................. download your god damn firmware , and flash it , thats all , why u ASKING too much noob question ? ?
btyork said:
Calm down a little buddy, we all get frustrated by people not doing their research, but WOW that's a lot of !!'s
Click to expand...
Click to collapse
buddy if you check his comments , you'll understand what i'm through .. he doesn't wanna follow the steps , instead , he is asking where is the kernel LMAO
k0sh said:
LMAO ... thats why you gonna brick your tab ...
i said follow the steps , after you download the damn rom from firmware ... extract the folder inside the ZIP inside the zip you'll found TAR ( AS ZIP ) but TAR ... put it in PDA section ... and GSM is international .. i can't list every country Firmware code .. ... rofl
Click to expand...
Click to collapse
I followed the video. The tablet is stuck on the logo "galaxy tab".
Originally I put the rom and kernel Overcome.
how the heck you put Overcome Kernel with the stock rom are you ****ing crazy ? ? ? ?
omg omg .. you want us to help you right .. do what i write in the ****ing thread . the steps all .. do not add , cut anything of what i wrote ...............
To the PPL not for you : sorry to out of my words ...
and for god sakes , hit the thanks button in all over my comments .. and all who comment here
That's what I did.
I flashed my galaxy tab by following this link http://forum.xda-developers.com/showthread.php?t=932082
Do not worry it worked well.
I wanted to flash my Galaxy tab version P1000XWJMK.
Click to expand...
Click to collapse
Hey guys. I have a peculiar problem with my friends Galaxy S. Yesterday, I tries to flash a Jelly Bean ROM from the forums. Straight from Gingerbread, I followed all the instructions to the line and finished flashing.
But sadly, the phone got stuck in a bootloop and is not booting right now. The three button combos aren't working - both download and recovery mode and I was pissed. Thankfully, I had a JIG with me (one I use with my Galaxy Note) and got my phone into download mode.
The problem now is that whenever I try to flash a stock ROM, it gets stuck at the boot.ini file and Odin says "Complete (Write) process failed". The phone (from inside downloaded mode) shows the text "Invalid Bootloader !!!" on the top.
I realize this is fixable but I just don't know what file to flash I am used to the Galaxy Note and the naming conventions and forum posts aren't quite clear to me. Can someone tell me what file I should be flashing to get the bootloader working again?
Thanks in advance!
Sent from my GT-N7000 using xda premium
gramessh said:
Can someone tell me what file I should be flashing to get the bootloader working again?
Click to expand...
Click to collapse
you can use any recovery kit from the My Androids Collections link below
I used the following recovery kit:
i9000 EzBase Rescue with CF Root & semaphore root repacked by slaphead20
No luck. Still the same error. Am I doing something wrong?
gramessh said:
I used the following recovery kit:
i9000 EzBase Rescue with CF Root & semaphore root repacked by slaphead20
No luck. Still the same error. Am I doing something wrong?
Click to expand...
Click to collapse
First remove battery, EXT SD card and SIM Card, press power for a few mins before reinserting battery to try
use the rescue kit with boot loader using heimdall or you can use those files with Odin too
recovery kit with bootloader? I am not sure which one that is. I can see a lot posted. I tried the Darky thing too and it failed.
Could you please provide me with a link?
gramessh said:
recovery kit with bootloader? I am not sure which one that is. I can see a lot posted. I tried the Darky thing too and it failed.
Could you please provide me with a link?
Click to expand...
Click to collapse
its i9000 Rescue Kit for i9000 using heimdall packed by ldq, it has its own bat.exe to do it automatically from PC, but you can also use the files on Odin or on linux, for linux , the configuration will be
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
xsenman said:
its i9000 Rescue Kit for i9000 using heimdall packed by ldq, it has its own bat.exe to do it automatically from PC, but you can also use the files on Odin or on linux, for linux , the configuration will be
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
Click to expand...
Click to collapse
sorry to get in like this
but i have the same problem
can u explain how to use the files with odin please?
thanks
benhouli said:
sorry to get in like this
but i have the same problem
can u explain how to use the files with odin please?
thanks
Click to expand...
Click to collapse
that package already has a bat.exe file, which will do it automatically when phone connected to PC, try that first
xsenman said:
its i9000 Rescue Kit for i9000 using heimdall packed by ldq, it has its own bat.exe to do it automatically from PC, but you can also use the files on Odin or on linux, for linux , the configuration will be
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
Click to expand...
Click to collapse
xsenman said:
that package already has a bat.exe file, which will do it automatically when phone connected to PC, try that first
Click to expand...
Click to collapse
already did , but i get message heimdall not installed , do u what to install now ?
i say yes
but even i am with windows xp and with admim permissions
it say i need admin permissions and need to do run as admin
and even i do it, it don't stop say it . and won't continue
by the way
on the sticker on back the phone it say I9000GSMH
and what i start the phone i see logo of anycall
benhouli said:
on the sticker on back the phone it say I9000GSMH and what i start the phone i see logo of anycall
Click to expand...
Click to collapse
you need to verify, IF you have an Anycall M110S or i9000, check forv retractable Antenna on top right corner, IF you have one than its an Anycall M110S an usinh i9000 Roms will only make it worse.
If its i9000, check MY Android Solutions link below to identify the exact problem you are having , in using Odin, you normally use only 3 files http://forum.xda-developers.com/showthread.php?t=1102881
xsenman said:
you need to verify, IF you have an Anycall M110S or i9000, check forv retractable Antenna on top right corner, IF you have one than its an Anycall M110S an usinh i9000 Roms will only make it worse.
If its i9000, check MY Android Solutions link below to identify the exact problem you are having , in using Odin, you normally use only 3 files http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
it's without the antenna
and i know about the 3 files and the pit file...
i tried that
try a lot of roms from the link u give me...
the only one i could start the phone was
Froyo 2.2.1
Asia
ZSJPJ/ZSJPG/OZSJPG
but it was very slow , without sound , and no imei
all the others got me to invalid bootloader
and the version was installed on the phone when i got him was
android version : 2.3.4
baseband version : i9000zsjpj
kernel version : 2.6.35.7
build number : lidroid-i9000-1.2
but i didn't do backup
and i don't know how to get any normal rom to work
benhouli said:
android version : 2.3.4
baseband version : i9000zsjpj
kernel version : 2.6.35.7
build number : lidroid-i9000-1.2
but i didn't do backup
and i don't know how to get any normal rom to work
Click to expand...
Click to collapse
lidroid is a Chinese modified ROM, ok, If you want to try flashing under Odin follow this http://forum.xda-developers.com/showpost.php?p=22471340&postcount=1
xsenman said:
you need to verify, IF you have an Anycall M110S or i9000, check forv retractable Antenna on top right corner, IF you have one than its an Anycall M110S an usinh i9000 Roms will only make it worse.
If its i9000, check MY Android Solutions link below to identify the exact problem you are having , in using Odin, you normally use only 3 files http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
xsenman said:
lidroid is a Chinese modified ROM, ok, If you want to try flashing under Odin follow this http://forum.xda-developers.com/showpost.php?p=22471340&postcount=1
Click to expand...
Click to collapse
still no success
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and why the message invalid bootloader repeat itself ?
after every rom i try to flash?
benhouli said:
still no success
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When you used Pit, was repartitioned ticked? , IF ticked and failed, download a 803 Pit (from, My android collections link below) and flash with boot loader and ROM package but untick repartition
xsenman said:
When you used Pit, was repartitioned ticked? , IF ticked and failed, download a 803 Pit (from, My android collections link below) and flash with boot loader and ROM package but untick repartition
Click to expand...
Click to collapse
still fail after i got 803 pit and untick repartition
and invalid bootloader too...
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
by the way
phone bootloader update stay unchecked...
and one more thing...
to flash everytime i must connect the jig to get the downloading mode,,,,
if i won't do it it will stay on anycall logo
benhouli said:
phone bootloader update stay unchecked...
and one more thing...
to flash everytime i must connect the jig to get the downloading mode,,,,
if i won't do it it will stay on anycall logo
Click to expand...
Click to collapse
Do you have KIES installed, if you do, kill all three KIES running files in your system using task manager and try again
This model with I9000GSMH, seems to have this problem, and I am not too sure why it has Anycall boot loader, as only M110S should be using it and the ROM package for it is different with hardware differences. I keep wondering if this model is a Chinese imitation or actually an M110S swiped with and i9000 casing or mother board .
I have come across a few persons having this very same issue on this very same model.
If you want to try using a Anycall Pit and Boot loader you can download from Pit Stop link below or try searching lidroid web site http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http://bbs.lidroid.com/ for a suitable ROM package
xsenman said:
Do you have KIES installed, if you do, kill all three KIES running files in your system using task manager and try again
This model with I9000GSMH, seems to have this problem, and I am not too sure why it has Anycall boot loader, as only M110S should be using it and the ROM package for it is different with hardware differences. I keep wondering if this model is a Chinese imitation or actually an M110S swiped with and i9000 casing or mother board .
I have come across a few persons having this very same issue on this very same model.
If you want to try using a Anycall Pit and Boot loader you can download from Pit Stop link below or try searching lidroid web site http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http://bbs.lidroid.com/ for a suitable ROM package
Click to expand...
Click to collapse
there is no trace on kies on task manager
and yes i know this is very weird thing that it's i9000 with anycall logo
about the pit stop link i will try
and about the lindroid i tried that too , it's very hard to find there something normal
by the way
thanks a lot for your help!
benhouli said:
there is no trace on kies on task manager
and yes i know this is very weird thing that it's i9000 with anycall logo
about the pit stop link i will try
and about the lindroid i tried that too , it's very hard to find there something normal
by the way
thanks a lot for your help!
Click to expand...
Click to collapse
can you try this bootloaders http://forum.xda-developers.com/showpost.php?p=14013450&postcount=1 with a JVU ROM or just the loader to see, IF it works
xsenman said:
can you try this bootloaders http://forum.xda-developers.com/showpost.php?p=14013450&postcount=1 with a JVU ROM or just the loader to see, IF it works
Click to expand...
Click to collapse
tried both...
both failed
You saod one of them worked... Froyo one i guess.
I think you should try to flash it after that get CM7.custom roms have boot images so...
I suggest this... But not sure if it works
Really sorry mate... I wish you luck .
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi