I have SM-G920A from US, AT&T. I suppose, it has been unlocked before re-selling. Was working fine in Europe (Lithuania) on a local network for two months. But after no visible impact (no physical damage, no flashing etc) it has lost IMEI and networking. My guess - it happened after an automatic update. Is there any chance to regain IMEI? (no back-up was made before)
I have checked the IMEI on various sites - it seems to be not blocked, clean.
Right now I have such information:
Firmware's CSC Code: ATT
Bootloader Version: G920AUCS4CPG1
PDA Version: G920AUCS4CPG1
CSC Version: G920AUCS4CPG1
Baseband Version: [empty]
Android version: 6.0.1
Build Number: MMB29K.G920AUCS4CPG1
IMEI: [empty]
Android Serial Number: 03157df3d063aa03
Samsung serial number: R38G30Q4CBA
I would very appreciate your help, guys! Could it help to re-instal G920AUCS4CPG1 via Odin? Any other solutions?
tele.incognito said:
I would very appreciate your help, guys! Could it help to re-instal G920AUCS4CPG1 via Odin? Any other solutions?
Click to expand...
Click to collapse
Try Samsung SmartSwitch first.
new_bember said:
Try Samsung SmartSwitch first.
Click to expand...
Click to collapse
Do you mean to restore backup? Would it be easy, but no backup has been made before with SmartSwitch.
Related
Model Number: SAMSUNG-SGH-I897
Firmware Version: 2.1-update1
Baseband Version: I897UCJE4
Kernel Version: 2.6.29 jetaek.lee(at)sep-11 #2
Build Number: ECLAIR
Help me please.my samsung captivate cannot be update and its rooted. i dont want to hard reset it because my sim will be lock again. how can i update my device?
lightning25 said:
Model Number: SAMSUNG-SGH-I897
Firmware Version: 2.1-update1
Baseband Version: I897UCJE4
Kernel Version: 2.6.29 jetaek.lee(at)sep-11 #2
Build Number: ECLAIR
Help me please.my samsung captivate cannot be update and its rooted. i dont want to hard reset it because my sim will be lock again. how can i update my device?
Click to expand...
Click to collapse
What exactly are you trying to do? Update through Skies?
You could get on stock KK4 (Gingerbread) with this: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
But before you do so, you have some reading to do!
Oh and once unlock, always unlock. You don't have to worry about your sim being locked (and in the worse case, remove it before doing the reset).
My device was sent to Carphone Warehouse (Verified Repair Shop UK) for a screen reapir. I burnt out the digitizer when I flashed something ment for the Galaxy Note 2. Used triangle away and reverted back to stock before sending. Came back flashed with stock Vodafone ROM, orginally on stock Three Rom. It's a contract phone which I got directly from Three. Sent to Samsung, returns still running stock Vodafone ROM but now unlocked for Three Sim. If I root the phone and install CWM with it revert back to a Vodafone lock? What did they actually do to the phone at Samsung, I'm guessing they flashed a new kernel. (I'm an amatuer when it comes to this)
Phone Details:
Model Number: GT-i9305
Android Version: 4.3
Baseband Version: i9305XXUEMK1
Kernel Version: 3.0.31-2051278
[email protected] #1
Thu Nov 28 13:11:27 KST 2013
Build Number: Jss15J. i9305XXUEMKC
SELinux Status: Enforcing
SEPF_GT-i905_4.3_0010
Whats the difference between i9305XXUEMK1 and I9305XXUEML9?
Thanks
rooting or installing CWM or installing any firmware you want it won't lock it...you can do it no problem...
the difference between those to is the date they have been released...it's a code that say region,country,date...coded in samsung way.
spiderman07 said:
rooting or installing CWM or installing any firmware you want it won't lock it...you can do it no problem...
the difference between those to is the date they have been released...it's a code that say region,country,date...coded in samsung way.
Click to expand...
Click to collapse
What about KNOX? I hear it might cause problems.
The Man with a Pran said:
What about KNOX? I hear it might cause problems.
Click to expand...
Click to collapse
Not if you delete it.
Sent from my GT-I9305 using Tapatalk
Hello,
I got an AT&T Samsung note 3 (SM-N900A) from USA and i want to use it outside Europe and US, the Note have the following specification:
Model number: SAMSUNG-SM-N900A
Android Version: 4.4.2
Baseband Version: N900AUCUCMLG
build number: KOT49H.N900AUCUCMLG
Version:
AP: N900AUCUCMLG
CP: N900AUCUCMLG
CSC: N900AATTCMLG
I successfully root it by using Geohot's Towelroot app . but when I tried the Chainfire's RegionLock Away v1.3 app it didn't work for me ( since I no longer have the AT&T SIM card) .
I also tried to use the service mode ( *#197328640# ) method but I couldn't find phone control screen .
so I tried to Install Custom ROM (build number: Dynamic Kat 2.0) using Safestrap, it worked fine for an android system but after repeating the above methods didn't seem to unlock it .
the Note seems to read the new SIM network but can't register on it or read its internal saved contacts
So can I update the modem of this device to an international modem without bricking it? and how to do so in a Safe way?
is their a other way to SIM unlock it ?
Excuse my little knowledge, I'm new in the android world
I really need help guys, any suggestion will be helpful, thanks alot.
You will need a box for unlock it (like z3x box). You have a lil guide: HERE
It look pretty nice way, but Z3X box is not widely available here and it's so expensive xD buying the unlock codes will be alot cheaper.
What will happen if I flash a different note 3 modem using Odin?
I am out of the US with an unlocked AT&T S6 G920A.
Firmware is still OCE
Questions:
- Will I receive OTA updates? I have a gophone sim card, does it help?
- What if I go to the US, put the gophone sim card? Will I get OTA updates?
- Can I manually update the firmware?
Thanks!!
and btw, Smart Switch shows:
Latest Software Version: OCE(ATT)
and on Emergency Software Recovery and Initialization it shows
Current Version: PDA: OCE / PHONE: OCE / CSC OCE
Latest Version: (it is just just blank)
I have an unlocked AT&T S6 Edge on T-Mobile, bought it with OF3 on it, received the OF4 update and it installed fine. To be safe, I suggest connecting to wi-fi to make sure you download it.
Mine is still on OCE and phone says that no update is available.
Do you have roaming data allowed? Just a suggestion, no idea if it will make any difference.
No. I do not have an international data package.
That might be needed to allow the phone to communicate with att to request the update?
If it is an AT&T phone you will only get OTA updates on the AT&T network. Otherwise you will have to try and manually update through Kies.
KennyG123 said:
If it is an AT&T phone you will only get OTA updates on the AT&T network. Otherwise you will have to try and manually update through Kies.
Click to expand...
Click to collapse
Kies does not work with S6. Smart Switch is the new software but it shows no update.
Latest Software Version: OCE(ATT)
and on Emergency Software Recovery and Initialization it shows
Current Version: PDA: OCE / PHONE: OCE / CSC OCE
Latest Version: (it is just just blank)
camoura10 said:
Kies does not work with S6. Smart Switch is the new software but it shows no update.
Latest Software Version: OCE(ATT)
and on Emergency Software Recovery and Initialization it shows
Current Version: PDA: OCE / PHONE: OCE / CSC OCE
Latest Version: (it is just just blank)
Click to expand...
Click to collapse
Yeah..sorry...old habit....it is possible the latest updates have not been added to Smart Switch yet.
I have just updated to G920AUCU2AOF3 using ODIN and the files from:
http://forum.xda-developers.com/att-galaxy-s6/general/odin-files-g920aucu2aof3-update-t3169222
It worked just fine. Now, I just have to wait for the OF4 files.
But having to install and configure all applications is a pain. I wish I have a way to update OTA.
Hello, xda specialists!
I need your help!
I had G920A with such versions:
AP version: G920AUCS5DPI1
CSC version: G920AATT5DPI1
CP version: G920AUCS5DPI1
I flashed:
BL_G920AUCS4CPG1
AP_G920AUCS4CPG1
CP_G920AUCS4CPG1
CSC_ATT_G920AATT4CPG1
And my phone lost baseband and imei. I know that if I write newer version I'll restore my phone.
I read that this, G920AUCS5DPI1, version can be got only by OTA update. May be someone has this OTA.zip file to get modem from it.
Please help. Thank you.
Looking for G920AUCS5DPI1 firmware patch OTA.zip
Any luck yet? I am looking for updated patch as it will also make my mobile device compatible with VOLTE
Cheers
Verticalraiser said:
Any luck yet? I am looking for updated patch as it will also make my mobile device compatible with VOLTE
Cheers
Click to expand...
Click to collapse
The firmware was pushed OTA, but I was able to find it a website called galaxys6edgeupdate, since I couldn't find it on here or sammobile.
gr_from said:
Hello, xda specialists!
I need your help!
I had G920A with such versions:
AP version: G920AUCS5DPI1
CSC version: G920AATT5DPI1
CP version: G920AUCS5DPI1
I flashed:
BL_G920AUCS4CPG1
AP_G920AUCS4CPG1
CP_G920AUCS4CPG1
CSC_ATT_G920AATT4CPG1
And my phone lost baseband and imei. I know that if I write newer version I'll restore my phone.
I read that this, G920AUCS5DPI1, version can be got only by OTA update. May be someone has this OTA.zip file to get modem from it.
Please help. Thank you.
Click to expand...
Click to collapse
I have the same problem. Have you found the files or any fix?
I think BestBuy will have the files, so I am going there tomorrow and see if they can flash the file. I will update if it is a success.