Database Develop

[Q] Cant go in clockwork recovery mode

Hi all,
I have been using CM 6.1 Stable since it has been released and yesterday i decided to reinstall it. But when i tried to boot in clockwork recovery i was stuck in red triangle screen. I reflashed it trough the rom manager several times but there wasn't any result. Any ideas?

Press volume up + power. A new menu will appear - apply the update.zip and you'll reboot into recovery.
Sent from my Legend using XDA App

katse said:
Press volume up + power. A new menu will appear - apply the update.zip and you'll reboot into recovery.
Click to expand...
Click to collapse
nothing happens, its just a regular boot.

ok, download this link: (http//koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.0.1-legend.zip
(take the ( and ) out of the link, but i cant post links because i didn't post 8 posts here yet
Rename the file to ''update.zip'' (without the '' of course) and copy it to the root of your SD-card.
Now boot into recovery ( by turn the phone off. When its off press the back button (and hold it) and press on the same time. You will be in the fastboot. Now select bootloader and press power. Now select Recovery and press power),
Now press volUp and power at the same time. you will see a blue menu. Now select ''apply sdcard: update.zip'' and press power. You'r mobile will now go into clockworkmodrecovery.
p.s. Sorry for my bad english

0ground0 said:
ok, download this link: (http//koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.0.1-legend.zip
(take the ( and ) out of the link, but i cant post links because i didn't post 8 posts here yet
Rename the file to ''update.zip'' (without the '' of course) and copy it to the root of your SD-card.
Now boot into recovery ( by turn the phone off. When its off press the back button (and hold it) and press on the same time. You will be in the fastboot. Now select bootloader and press power. Now select Recovery and press power),
Now press volUp and power at the same time. you will see a blue menu. Now select ''apply sdcard: update.zip'' and press power. You'r mobile will now go into clockworkmodrecovery.
p.s. Sorry for my bad english
Click to expand...
Click to collapse
It worked, thanks!

[How to][Guide] Use CWM6 despite the Bluescreen

Lots of people have bluescreen problem with CWM6 but someone doesn't know that the recovery is working except the bluescreen problem.
So you can do everything with this recovery despite the bluescreen. In fact if you use volume buttons and home buttons you can flash,wipe,reboot,etc.
But the problem is: how can I do it if I can't see what I'm doing?
Now,after some reboots, I had CWM6 without bluescreen one time so I wrote each menu entry and so I'm sharing it with you:
Main menu:
reboot system
install zip
wipe data/factory reset
wipe cache partition
backup and restore
mounts and storage
advanced
Install zip submenu:
choose zip from sdcard
choose zip from last install folder
install zip from sideload
toggle signature verification
Wipe data/factory reset submenu:
no
yes
Wipe cache partition submenu:
no
yes
Backup and restore submenu:
backup to sdcard
restore from sdcard
delete from sdcard
advanced restore from sdcard
free unused backup data
choose default backup format
Advanced submenu:
reboot recovery
reboot to bootloader
power off
wipe dalvik cache
report error
key test
show log
Now the problem is how to flash a new rom? you can use CWM Manager or you can use CWM directly.
For example if you want to flash CM11-COOPER.zip via CWM, and not with the CWM manager app,you should:
-put the rom in the sdcard
-rename the rom zzCM11-COOPER.zip so it will appear at the end of the list
-reboot in cwm
- vol down -> home button -> home button -> vol up -> home button -> vol down -> home button
- wait some minutes for flashing
- press back button some times (just to be sure you came back to the main menu)
- press home button (reboot system)
If you want to wipe cache you should:
- boot in cwm
- vol down -> vol down -> vol down -> home button -> vol down -> home button
If you want to wipe dalvik cache you should:
-boot in cwm
- vol up -> home -> vol down -> vol down -> vol down -> home button -> vol down -> home button
P.S: I noticed that CWM6 is slower than CWM5 so you must do each step slowly to be sure everything works well.
P.S.2: sorry for my english!

finding ways against all odds! evil trick.

ty men its really helped just did it and i have kit kat on xd i didnt wipe beacuse i had cm 10.1 so i didnt need to wipe at all so just put the room and start to install after 2minits i did rebot and that all
ty

Thank you!
Thank you so much! I was stuck on this blue screen issue, and your menu list helped me get the latest kitkat rom on my samsung ace. First I did a factory reset following your menu, but i didn't know how to return to the begining after it completed it. So I just pulled out the battery and powered back into the blue screen to do the cache wipe, pulled the battery again once I felt the process should be done. Then I restrted back to the blue screen and followed youf steps to put the rom on the phone. I left it for maybe 20 minutes, because i didn't know how long it would take for it to complete. Pulled out the battery again, started the phone normally, and now I have kitkat.
Thanks again for posting the menu.Couldn't have done this without it!

and format/system????
Capcap said:
Thank you so much! I was stuck on this blue screen issue, and your menu list helped me get the latest kitkat rom on my samsung ace. First I did a factory reset following your menu, but i didn't know how to return to the begining after it completed it. So I just pulled out the battery and powered back into the blue screen to do the cache wipe, pulled the battery again once I felt the process should be done. Then I restrted back to the blue screen and followed youf steps to put the rom on the phone. I left it for maybe 20 minutes, because i didn't know how long it would take for it to complete. Pulled out the battery again, started the phone normally, and now I have kitkat.
Thanks again for posting the menu.Couldn't have done this without it!
Click to expand...
Click to collapse
Hi, first i will thank you because with your guide i've installed kitkat, however i'll ask you how can i do format/system on this cwm6 with the bluescreen, because i haven't found this on your post. Thank you very much !!!!!
P.S.: Sorry for my english,i'm italian

TheDDS9900 said:
Hi, first i will thank you because with your guide i've installed kitkat, however i'll ask you how can i do format/system on this cwm6 with the bluescreen, because i haven't found this on your post. Thank you very much !!!!!
P.S.: Sorry for my english,i'm italian
Click to expand...
Click to collapse
Blue screen bug fixed! Look here. working cwm6 recovery

Thank you very much for this manual, this saved my friend phone

[Q] [Need Help] Can't boot???

Hi all
Now,I'm using Note 3 AT&T (N900A). When I am using Odin to go to Recovery, then press Fail Odin, then I can not turn it on. Now, I can not use any buttons on the machine. When I press the Power button, the machine does not vibrate. The screen is dark. Anyone can help me? Thanks so much!!
P/s: sorry about my English.
Follow instructions word for word, take your time and go slow
1.Download the (alreadykitkat.zip) if you haven't done so yet.
2. Extract it to somewhere on your desktop or PC
3.Copy “Safestrap-Custom.apk” to your phones internal memory, and install it. Make sure you install recovery from within safestrap app, or verify that it is installed
4.Next copy the rom to your phones internal memory(it’s called XNote Port.zip)
5.Boot into download mode (power off, then hold-Volume down, Home and power button at same time
6.Open the “Togetsafestrap” folder and open Odin (win 7 and 8 users may need to run with administrator rights). Add the correct partition Files,
Make sure the files or AP_N900AUCUBMJ5.tar.md5 and BL_N900AUCUBMJ5.tar.md5 and verify your Odin window looks like this picture
7.Click start. Now when the phone is booting up make sure to click “recovery” on the safestrap screen.
(If you missed it just hold down, power button until phone reboots)
8. You can wipe before flashing (Optional) if you want a clean install. Flash the X-Note Port.zip to Stock slot,
But don’t reboot when done,
9. Keep hitting the back button until you see the reboot menu button
Press reboot menu button and select download mode button. Or if you messed up and rebooted just Press Volume down, Home and power button at same time until your back in download mode.
10. Now open the folder “togetbooting” and open Odin. Select the correct partition Files, Make sure you select AP_N900AUCECMGL.tar and BL_N900AUCECMGL.tar and verify your Odin window looks like this picture
11. Click start
done, enjoy the ROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2654992

Sorry your phone isn't responding. Since you can't get into download mode, I recommend trying this method to restore.
http://forum.xda-developers.com/showthread.php?t=2476353

440bro said:
Sorry your phone isn't responding. Since you can't get into download mode, I recommend trying this method to restore.
http://forum.xda-developers.com/showthread.php?t=2476353
Click to expand...
Click to collapse
it wont work if he isn't on mi9. it wont let him downgrade.

Help! P7 scatter file?

Can someone pls help me, i need scatter file for P7. My phone is restarting and turning on/off process alone. I cant get him to fabric state cause he remmembered some backup and its doing something like system restore :/ I tryed to do update but he cant accomplish that...i dont know how to reinstal it I wanna try with sp flash tool but i dont have that scatter.txt file

i downloaded stock firmware but there is no scatter file in it. Only update.app

simoa007 said:
Can someone pls help me, i need scatter file for P7. My phone is restarting and turning on/off process alone. I cant get him to fabric state cause he remmembered some backup and its doing something like system restore :/ I tryed to do update but he cant accomplish that...i dont know how to reinstal it I wanna try with sp flash tool but i dont have that scatter.txt file
Click to expand...
Click to collapse
p7 doesn't have MTK cpu...so there isn't a scatter file and also sp flash tool doesn't work
with update.app and stock recovery you can force the rom's flash by putting the update.app inside a folder in sd card (called dload), shutdown the phone and then pressing concurrently vol+ vol- and power button

usb2 said:
p7 doesn't have MTK cpu...so there isn't a scatter file and also sp flash tool doesn't work
with update.app and stock recovery you can force the rom's flash by putting the update.app inside a folder in sd card (called dload), shutdown the phone and then pressing concurrently vol+ vol- and power button
Click to expand...
Click to collapse
I tried that, but unsuccessfully. I placed the dload folder on SD card with update.app inside it and went into fastboot mode with the vol + vol- and power button but when i choose update from SD card and select dload folder it doesnt show me the update.app inside. Folder dload is showing empty

simoa007 said:
I tried that, but unsuccessfully. I placed the dload folder on SD card with update.app inside it and went into fastboot mode with the vol + vol- and power button but when i choose update from SD card and select dload folder it doesnt show me the update.app inside. Folder dload is showing empty
Click to expand...
Click to collapse
if everything it's ok pressing the three button the phone should automatically start in EMUI recovery, flash the fw and reset the internal memory without the need to select anything...

simoa007 said:
I tried that, but unsuccessfully. I placed the dload folder on SD card with update.app inside it and went into fastboot mode with the vol + vol- and power button but when i choose update from SD card and select dload folder it doesnt show me the update.app inside. Folder dload is showing empty
Click to expand...
Click to collapse
You need to use stock recovery
Not twrp or cwm recovery

usb2 said:
if everything it's ok pressing the three button the phone should automatically start in EMUI recovery, flash the fw and reset the internal memory without the need to select anything...
Click to expand...
Click to collapse
I tried that but didnt help

zaabolla said:
You need to use stock recovery
Not twrp or cwm recovery
Click to expand...
Click to collapse
Is there any "how to use" for stock recovery?

simoa007 said:
Is there any "how to use" for stock recovery?
Click to expand...
Click to collapse
there are many threads talking about how to flash stock recovery.img and boot.img with adb tool in general section
keep reeding and use search botton.

plz help e
My Huawei p7 bootloader is death how to repair plz help me.... unfortunately bootloader is failed...

wipe cache partition

Anyone any idea how to do this now. The option is gone from erecovery
9.1.0.382

dlevick said:
Anyone any idea how to do this now. The option is gone from erecovery
9.1.0.382
Click to expand...
Click to collapse
. 382? Meant. 328, right?
1. Phone Off.
2. Push and hold Vol+ & Power-Button until you're in menue.
3. Push 'Whipe Cache'
4. Reboot
5. Be a happy Unicorn

CaptainKaracho said:
. 382? Meant. 328, right?
1. Phone Off.
2. Push and hold Vol+ & Power-Button until you're in menue.
3. Push 'Whipe Cache'
4. Reboot
5. Be a happy Unicorn
Click to expand...
Click to collapse
Does the p20 pro optimizer app wipe the cache automatically if initiated?

newp20pro said:
Does the p20 pro optimizer app wipe the cache automatically if initiated?
Click to expand...
Click to collapse
Sadly no it needs to be done in recovery

Also, you need to do that actions with the phone not connected to anything via USB cable, not even charging, or else it would go into eRecovery(useful for updates), not normal Recovery.

Ive tried this method vol up and per button but it shows emu symbol then software install failed

quinnford said:
Ive tried this method vol up and per button but it shows emu symbol then software install failed
Click to expand...
Click to collapse
Do you have a folder named "dload" in the root directory?

quinnford said:
Ive tried this method vol up and per button but it shows emu symbol then software install failed
Click to expand...
Click to collapse
To get to the right menu to wipe the cache partition, I had to let go of the power button once I saw the Huawei symbol come up on the screen but still keep my finger on the volume up button until the menu displayed.