Related
Ok guys now i have bricked Galaxy Tab.
Main problem is my customer wanted to install custom rom without rooting device. So there is no recovery mode. I flashed with odin and Heimdall but stuck at Galaxy Tab screen.
i found a solution. There is a recovery section in Heimdall. if someone tell me or send me recovery file i can test it and i will tell the last situation. If it works we will find a solution. if not ...
PS: if u have other solutions please offer me . i didnt find a suitable solution.
Thanks for reading
We would need to know what kind of tab.
it is euro tab
Can you get back into download mode (yellow android digging)? Or sometimes a phone-pc! picture? Then you can just reflash.
i can enter download mode but after re-flash system cant start. bec there is no recovery.
flashing has no relation with root... you can flash firmware on a not rooted device WITHOUT any problem.
recovery is inside the firmware you flash....I think you got some confused ideas...
i am reflashing device it reboots and stucks at galaxy tab screen.
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
- exec '/system/bin/sh' failed: No such file or directory (2) -
Any ideas ?
try this it might work
hold the power off button for 10 second
to make sure it really powered off
hold down all 3 button together
see if it power up in recovery mode
www.cepdukkani.net said:
i am reflashing device it reboots and stucks at galaxy tab screen.
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
Any ideas ?
Click to expand...
Click to collapse
You don't flash with adb. Flash with odin3 or heimdal.
man i am flashing with odin it reboots and stucks in Galaxy tab screen.
3 button combo stucks "Power Reset or Unknown Upload Mode " screen
Finally ;
Reflash with odin and heimdall :
Result Stuck at Galaxy Tab Screen. Adb result Device in Recovery.
Attempt a full flash with firmware that has recovery? MoDaCo is a good one. Doesn't sound bricked to me, sounds like your rom is not compatible with the firmware.
Are you flashing a ext4 firmware?
I got this tab stuck at the galaxy screen when I attempted a recovery to a non ext4 backup. Sounds similar.
Sent from my GT-P1000 using XDA App
i cant flash ext4 bec it stucks at %100
i re-tried it it gots FAIL at %100
This is a gsm tab, correct?
Have you tried any other kernels or roms?
Which are you currently trying to flash? Did you unlock the bootloaders?
Sounds like a revert to stock and 2nd attempt are in order.
Sent from my GT-P1000 using XDA App
i tried to flash PDA section it gave me error. i flash with PHONE section (via odin) it resets but still same error.
it is gsm euro tab. i tried original 5 firmwares
i tried Roto, JM6, Modaco, Overcome still stuck at same state...
i still think main problem is No Recovery partition in device.
If you can get it into download mode, then there is still hope...
Unfortunately, I don't have the answer...
When mine was stuck at galaxy screen, and wouldn't even go into recovery, I flashed a new kernel and all was well.
I also never used Odin, always Heimdel.
Sent from my GT-P1000 using XDA App
as i read in modaco :
after kernel update enter recovery
but no recovery after kernel update any ideas
Likely because you haven't gotten a complete flash... At least that is how you make it sound.
Are you sure you have and are following the instructions correctly?
Unlocked bootloaders and proper use of odin are the two things I would check right off the bat...
Sent from my GT-P1000 using XDA App
i am not sure that if my bootloader is unlocked or not.
i flashed with odin that is fine what else ?
Last resort I have for u
If u are able to get in download mode
Go get roto jme V4 full version
Flash it with Odin
Please read instruction for installing roto jme v4 full version
***FLASH ONLY WITH ODIN***
FOR GSM TAB ONLY
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck
[UPDATE] .after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
jthornton71707 said:
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.
Click to expand...
Click to collapse
if you have a att note 3 you might be screwed both the firmwares you list are not for our phone your best bet would be to go to a best buy or att service center and seee if they can reflash your phone
Is there a tar for the AT&T firmware? I've searched but this was all I could find.
jthornton71707 said:
Is there a tar for the AT&T firmware? I've searched but this was all I could find.
Click to expand...
Click to collapse
Yeah, it seems that the N900XXUDNA6 is not for the US Variant
"N900XXUDNA6 Android 4.4.2 KitKat official firmware update for Galaxy Note 3 SM-N900 is now rolled out by Samsung. This is the first KitKat official firmware for Galaxy Note 3 SM-N900. The firmware update rolled out in various countries including Sri Lanka, Nepal, Indonesia, Singapore, Vietnam, Kazakhstan, Ukraine, Russia, Thailand and India"
The DNA6 would be for the SM-N900 Exynos CPU devices, not the SM-N900A Snapdragon. That is probably your problem (In addition to trying to roll back to JB from KK)
Unfortunately, I dont know of any stock KitKat firmware. There is MI9 on Samfirmware's site, but that is JB not KitKat
jthornton71707 said:
Is there a tar for the AT&T firmware? I've searched but this was all I could find.
Click to expand...
Click to collapse
sorry.
B_I_N_G_E said:
sorry.
Click to expand...
Click to collapse
So after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
jthornton71707 said:
So after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
Click to expand...
Click to collapse
You could try to stop the boot, go back into Recovery and wipe cache, and wipe all data. I had an experience with my last device (SGSIII) that would boot loop sometimes when flashing back to a stock ROM.
Other than that, I dont have any other ideas
Just Googled the "SW REV CHECK FAIL" FUSED 3 BINARY 2", from what I found the Fused 3 means you were on Kit Kat, and Binary 2 basically means you are trying to downgrade to JB
It wont let me even boot into recovery. I hold the buttons and it boots back up saying "booting into recovery" like it is, then it just boot loops again.
jthornton71707 said:
It wont let me even boot into recovery. I hold the buttons and it boots back up saying "booting into recovery" like it is, then it just boot loops again.
Click to expand...
Click to collapse
The only other things I saw on that, suggested to users(on a different Samsung device) to use a jig to get it back into recovery. I am not familiar enough with the N3 yet to know if a jig will work on our devices. My guess is you messed up the bootloaders
Edit** I think that since things are so locked down that your best bet might be to try what jerrycoffman45 suggested a few posts ago
jerrycoffman45 said:
if you have a att note 3 you might be screwed both the firmwares you list are not for our phone your best bet would be to go to a best buy or att service center and seee if they can reflash your phone
Click to expand...
Click to collapse
My local at&t and best buy aren't very helpful for anything at all. ill keep googling ive been at this for 2 days now
There is no firmware to download for 4.4.2 yet so you are stuck till there is or do what I suggested you could also do a warranty exchange by calling att and you can't just go to any att store it has to be a service center
Sent from my SAMSUNG-SM-N900A using Tapatalk
---------- Post added at 05:40 PM ---------- Previous post was at 05:25 PM ----------
This might get you running
http://forum.xda-developers.com/showthread.php?t=2703006
Sent from my SAMSUNG-SM-N900A using Tapatalk
jthornton71707 said:
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck
[UPDATE] .after looking around all day i have found i am able to successfully flash the n900a AP, CP, and PIT files, however the problems seems to be whenever i try to flash a Bootloader file. The update gives me the error on the phone "SW REV CHECK FAIL" FUSED 3 BINARY 2. My knox counter is still 0x0. By flashing the at&t AP, PIT, and CP files the phone now boot loops and no longer takes me to the screen requesting me to restore thru KIES. However all it does it bootloop. I try to boot into recovery and it will tell me at the top left of the screen "booting recovery" but then just turn off and go right back to the "samsung galaxy note 3 screen" Does anything have any idea here?????
Click to expand...
Click to collapse
Still need help?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
only fix I know
as far as I have searched, the only current fix to get to use your phone is
GUIDE/ROM[4/1][AT&T][NC2_Bootloader][ N900AUCECMGL KITKAT][Stuck Download-Mode FIX]
Hello, I've soft bricked my phone. I was determined to fix my GPS issue by flashing a new rom (X-ROM). I did that via safestrap recovery but when my phone rebooted it was stuck on Samsung Galaxy Note 3 Logo. I tried to wipe factory data and cache but nothing happend. I was trying for a couple of hours different solutions including flashing N900AUCECMLG_OneClickBin.zip but error appears SW REV CHECK FAIL : [sbl1] Fused 2 > Binary 1. I tried to flash 4.3 but i was unable to do that because Odin fails in the end and a warning message appears on my phone to connect it with kies. I was about to try http://forum.xda-developers.com/showthread.php?t=2559715, but some of the links are dead so i cannot do that. I can only enter download mode now
Any help will be much appreciated!
PS: I;ve been using KitKat 4.4.2
FIXED WITH http://forum.xda-developers.com/not...odin-files-t2838117/post54611030#post54611030 THANK YOU!
6thSense93 said:
Hello, I've soft bricked my phone. I was determined to fix my GPS issue by flashing a new rom (X-ROM). I did that via safestrap recovery but when my phone rebooted it was stuck on Samsung Galaxy Note 3 Logo. I tried to wipe factory data and cache but nothing happend. I was trying for a couple of hours different solutions including flashing N900AUCECMLG_OneClickBin.zip but error appears SW REV CHECK FAIL : [sbl1] Fused 2 > Binary 1. I tried to flash 4.3 but i was unable to do that because Odin fails in the end and a warning message appears on my phone to connect it with kies. I was about to try http://forum.xda-developers.com/showthread.php?t=2559715, but some of the links are dead so i cannot do that. I can only enter download mode now
Any help will be much appreciated!
PS: I;ve been using KitKat 4.4.2
FIXED WITH http://forum.xda-developers.com/not...odin-files-t2838117/post54611030#post54611030 THANK YOU!
Click to expand...
Click to collapse
Make sure anything you flash has NC2 in the thread title...the Fuse error means that you tried to flash an old firmware over an incompatible locked bootloader. You can't downgrade from 4.4.2 you are burned to Fuse 3. Those Odin files are lifesavers though you won't have to go the MLG restore route anymore you can just reflash those stock NC2 files if you ever get in another jam :good:
so i recently got a note 3 from a friend to fix for her. it boots to the samsung logo then vibrates and reboots over and over, recovery just says "booting recovery" then it goes blank and reboots to the same booting recovery screen, shes doesnt know what version it had prior to bricking. she said one day it was working then turned off and never back on again, the odin mode screen had a2, a3 on it ill post a pic later anyway i can get into download mode so i figured id just flash with odin and be good, i tried to narrow down the proper firmware with the a3, but after flashing nc2, nl1, oc1, im still stuck odin says everything passed, i tried flashing the big main file, tried flashing them in each box at the same time, even tried it with the pit file, tried flashing with odin 3.9 and 3.10.7. same result odin says passed still cant access recovery or os. any help would be greatly appreciated. thanks
Open Odin, uncheck everything except f reset time, flash rom. When you see reset on the statutes window, remove USB cable from the phone, remove battery, wait 5 seconds, replace battery, boot directly into recovery, perform a factory wipe, reboot.
does it matter what version i flash? since im not really sure what version it had prior?
I can't figure out how to upload a photo I have xda 4.0, and can't post outside links yet. Anyway
It says
Product name:N900A
Current binary: Samsung official
System status official
Knox void status 0x0
Qualcomm Secureboot enabled(csb)
Ap swrev s2 t2 a2 a3 p2
Secure download enable
Udc start
Hope that helps
Ran Odin again with the settings you said, after the battery pull the phone says recovery booting, then turned off vibrated twice then same screen again and again. Thanks for the suggestion though any our ideas? I was searching and thought I seen somewhere that to unbrick it it needs to be the same firmware it had before, but I don't know what that was.
ghost5825 said:
Ran Odin again with the settings you said, after the battery pull the phone says recovery booting, then turned off vibrated twice then same screen again and again. Thanks for the suggestion though any our ideas? I was searching and thought I seen somewhere that to unbrick it it needs to be the same firmware it had before, but I don't know what that was.
Click to expand...
Click to collapse
You should probably ask her if she had Lollipop. If she did then that narrows it down to OC1 or OC2.
She doesn't know, not very phone literate as far as software, any ideas? I read in another thread to flash a modified version of nc2 but can't seem to find that version, this is the thread http://forum.xda-developers.com/showthread.php?t=2703006
Don't know if I can't find it, kinda confusing as far as what I need, like I said I've tried everything except oc2 cant find a link I've tried googling, and that thread says Odin files but can't find a full one for oc2, there's ones for safestrap but can't find Odin
Hi everyone,
I tried to root n9208 by using this file (download.chainfire.eu/959/CF-Root/CF-Auto-Root/CF-Auto-Root-noblelte-nobleltextc-smn9208.zip. Root process was succesfull. But, Phone gives error "recovery is not seandroid enforcing" and stuck logo.
SM-N9208 is writed back cover.
I checked software info before the root process. Model is SM-N9208
But i released that model is different in odin mode. N9208DX is showed in odin mode.
Phone is stucking at logo.
I need N9208DX rom. Please help