[Q] Possible Unbrick For Galaxy Tab ! - Galaxy Tab Q&A, Help & Troubleshooting

Ok guys now i have bricked Galaxy Tab.
Main problem is my customer wanted to install custom rom without rooting device. So there is no recovery mode. I flashed with odin and Heimdall but stuck at Galaxy Tab screen.
i found a solution. There is a recovery section in Heimdall. if someone tell me or send me recovery file i can test it and i will tell the last situation. If it works we will find a solution. if not ...
PS: if u have other solutions please offer me . i didnt find a suitable solution.
Thanks for reading

We would need to know what kind of tab.

it is euro tab

Can you get back into download mode (yellow android digging)? Or sometimes a phone-pc! picture? Then you can just reflash.

i can enter download mode but after re-flash system cant start. bec there is no recovery.

flashing has no relation with root... you can flash firmware on a not rooted device WITHOUT any problem.
recovery is inside the firmware you flash....I think you got some confused ideas...

i am reflashing device it reboots and stucks at galaxy tab screen.
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
- exec '/system/bin/sh' failed: No such file or directory (2) -
Any ideas ?

try this it might work
hold the power off button for 10 second
to make sure it really powered off
hold down all 3 button together
see if it power up in recovery mode

www.cepdukkani.net said:
i am reflashing device it reboots and stucks at galaxy tab screen.
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
Any ideas ?
Click to expand...
Click to collapse
You don't flash with adb. Flash with odin3 or heimdal.

man i am flashing with odin it reboots and stucks in Galaxy tab screen.
3 button combo stucks "Power Reset or Unknown Upload Mode " screen
Finally ;
Reflash with odin and heimdall :
Result Stuck at Galaxy Tab Screen. Adb result Device in Recovery.

Attempt a full flash with firmware that has recovery? MoDaCo is a good one. Doesn't sound bricked to me, sounds like your rom is not compatible with the firmware.
Are you flashing a ext4 firmware?
I got this tab stuck at the galaxy screen when I attempted a recovery to a non ext4 backup. Sounds similar.
Sent from my GT-P1000 using XDA App

i cant flash ext4 bec it stucks at %100

i re-tried it it gots FAIL at %100

This is a gsm tab, correct?
Have you tried any other kernels or roms?
Which are you currently trying to flash? Did you unlock the bootloaders?
Sounds like a revert to stock and 2nd attempt are in order.
Sent from my GT-P1000 using XDA App

i tried to flash PDA section it gave me error. i flash with PHONE section (via odin) it resets but still same error.
it is gsm euro tab. i tried original 5 firmwares
i tried Roto, JM6, Modaco, Overcome still stuck at same state...
i still think main problem is No Recovery partition in device.

If you can get it into download mode, then there is still hope...
Unfortunately, I don't have the answer...
When mine was stuck at galaxy screen, and wouldn't even go into recovery, I flashed a new kernel and all was well.
I also never used Odin, always Heimdel.
Sent from my GT-P1000 using XDA App

as i read in modaco :
after kernel update enter recovery
but no recovery after kernel update any ideas

Likely because you haven't gotten a complete flash... At least that is how you make it sound.
Are you sure you have and are following the instructions correctly?
Unlocked bootloaders and proper use of odin are the two things I would check right off the bat...
Sent from my GT-P1000 using XDA App

i am not sure that if my bootloader is unlocked or not.
i flashed with odin that is fine what else ?

Last resort I have for u
If u are able to get in download mode
Go get roto jme V4 full version
Flash it with Odin
Please read instruction for installing roto jme v4 full version
***FLASH ONLY WITH ODIN***
FOR GSM TAB ONLY

Related

Galaxy Tab not booting, stuck at "GalaxyTab Samsung" boot screen

Hello,
I have flashed my Galaxy Tab with roto JMI, but it's stuck at the "GalaxyTab / Samsung" boot screen.
I can get into download mode with volume down and power, I can reflash it but in the end it does not boot.
What can i do?
loony
*bump* anybody?
Help please!!! I have the same problem!
I am still having this problem. I am wondering if there is any way how to debug whats happening at the Samsung logo screen. With adb the devices is not detected (it seems not to be detected at the usb controller).
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Hi, I have exactly the same problem.
After upgrade du JMI roto with odin 1.7 (all upload seems to be ok, repartition with p1 and pda file Roto-JMI-Full-v2 no error message) but the device hangs on samsung galaxy tab logo and don't boot.
In my case previous version was pda jj3/phone jid / scs jj2
rsmurdoch said:
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Same Problem
Im on the SPH-P100, I have the same issue I can access it in Adb the log shows it in stalling all of my old .apks but it never boots past the logo.I have re flashed also but no luck plz help if u can i can post the logcat here but it goes for hrs -_- I assume it loops the process.
loonyt said:
Device it GT-P1000 (German/European version)
Flashed with P1000OXAJM6
Click to expand...
Click to collapse
So, this one contains a bootloader (Sbl.bin). maybe thats the cause of the problem. Still, I wonder why it started in the first place and then after some reboots it gets stuck. I tried different Kernels with no luck. Maybe I should try to flash a new bootloader? However, that could brick the device forever.
Loonyt
loonyt said:
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Click to expand...
Click to collapse
*bump* Can anybody help?
I have a very similar problem.
I flashed the [ROM] Roto JMI Pre-Rooted Firmware v2 [Feb 4, 2011], and got stuck on the Samsung Boot screen.
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Hopefully, someone knows what's going on. If not, I'm taking it back to my carrier, and asking them to fix it (assuming they'll fix it).
Maybe this will help for the bootloader.
Its a bootloader patch. Please read thru the thread. Hope it helps.
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my GT-P1000 using Tapatalk
dlui1 said:
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Click to expand...
Click to collapse
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Qsilver2001 said:
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I meant that I can get into Download mode, with the Downloading logo, but doesn't get detected by Odin. And it stays stuck on the Samsung boot logo if turned on normally. Can't get into recovery either.
Before I flashed the Roto ROM, Odin was working perfectly fine. I've been flashing other kernels and ROMs before. But now, the USB doesn't even seem to get detected. It's like nothing is plugged in. Can't even choose to install/uninstall old/new drivers.
I dont think it's the USB port, as I've tried to connect to Odin on 3 different computers, trying every available port on each. It's looking like the USB connector is just dead or something.
My tabs mainboard was broken, it was replaced and now it works again.
Sent from my GT-P1000 using XDA App
Same problem here man. I CAN get in to download mode. Odin recognize it normally. I CAN download normally. Look likes everything is normal, but after update it restarts, but hangs on Galaxy Tab Samsung logo. I've tryed everything with different firmware, custom-roms, hacking things, but with no success.
Can someone please help me?
Same problem here. My tab is stuck at samsung galaxy logo and until now, no one could provide an answer.
I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another). The tab was canadian that was flashed to euro.
Thanks for reading my post.
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
handfree said:
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
Click to expand...
Click to collapse
Same prob. tab reboots to samsung logo.
Same Here, I tried many combinations with the help of experts on this board. Conclusion: shipped to Sammy for warranty repair.

[Q] Bricked Galaxy Mini

Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
u cant even enter recovery?if u can,just wipe cache and data..
Sent from public phone using 10cents.
ybregeon said:
Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
Click to expand...
Click to collapse
Just remove the battery and stop your phone.
Put the battery in again.
Go to recovery mode by pressing Home + Power button at the same time.
In the reocevey choose wipe data/factory reset option.
Reboot your device after you are done.
You mobile will boot up fine.
Thank you for your answers but I wanna insists on a point: I can't access recovery at all, the phone show me the samsung logo for about half a second then restarts, and is looping in this state. No recovery, only downloading mode and RAMDUMP Mode (ARM9 mode) & Emergency Dload Mode (ARM9 Mode). Nothing else is avalaible.
Helppp
ybregeon said:
Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
Click to expand...
Click to collapse
hey man i've already had that problem..coz i flash 2.3.6 and encountered same problem but i manage to fix it.. you need to enter recovery mode... Note: you need to hold the home & power button and wait for the samsung logo to flash TWICE (2X),when the 2nd logo flash, just realease the buttons and your on recovery mode.just wipe/ data reset.. right now im using Ginger bread 2.3.6JKVT and its rooted also.
No, I can't access recovery sorry.
Connect your phone to your laptop.
Use ADB
Type this :
adb shell reboot recovery
That will take you to download mode,then you can flash rom again. It would be easier if you have a CWM installed
Sent from my GT-I5500-MADTEAM using Tapatalk
Shall I use Downloading mode to do this?
ybregeon said:
Shall I use Downloading mode to do this?
Click to expand...
Click to collapse
If you can't access recovery either falsh CWM recovery or Flash another firmware from Download mode. If you want to flash CWM recovery just follow the link below for Galaxy Mini and search CWM recovery.
I tried many times, since i have this problem, to flash and reflash, official roms, CWR, but nothing works, setup goes fine according to Odin, but still have the problem on my phone, still only downloading mode works, and still a flashing screen, just during the samsung logo.
No one can help me with my mobile???
ybregeon said:
No, I can't access recovery sorry.
Click to expand...
Click to collapse
did you wait for the samsumg logo to flash tiwce while holding the combo key? you see when im installing firmware using odin my laptop turn off coz i dont have a battery i thought my mini was brick because the process was not finish,so what happen i tried to acces recovery mode its only shows a computer icon & phone icon. but i manage to fix the problem i go to download mode and flash again another firmware. and everything goes fine..so how come that you cant access recorvery...i would suggest that you flash a firmware with 4 parts not a single package.
just try this www*mediafire*com/?br3r8fod5g3vud4 flash this firmware with Odin this will surely work please replace * with . brace my post count is not enough to post outside link
As long as you can enter download mode... you are safe. If you can... just flash it back with Odin.
Follow this step
http://forum.xda-developers.com/showthread.php?t=1107331
Thanks but no
dhlalit11 said:
just try this www*mediafire*com/?br3r8fod5g3vud4 flash this firmware with Odin this will surely work please replace * with . brace my post count is not enough to post outside link
Click to expand...
Click to collapse
Thank you for the link, i tried but still have the same problem. Could this be an EEPROM problem?
ybregeon said:
Thank you for the link, i tried but still have the same problem. Could this be an EEPROM problem?
Click to expand...
Click to collapse
Try booting up without micro sd nor sim card.
Sent from my neighbour’s android phone
i had a same problem too.
my phone cannot power on, and ONLY download mode only working.
i flashed it for so many time too, and it doesn't seem to fix the problem.
so any fix on this ?
To ybregeon and Tre3,
I had the exact same issue, only Download Mode and RAM Dump, but could not enter recovery mode. Tried flashing many ROMs, oneclick unbrick, Heimdall recovery etc. but still no solutions available, I tried many-many tricks with no luck. So I went to Samsung Service Center, and it turned out that the problem is in the mainboard. It took me one night before Samsung replaced the mainboard from my phone and it's been working well since. All free of charge.
I hope your warranty is still valid. Good luck.
Sent from my GT-S5570 using XDA App
distan7 said:
To ybregeon and Tre3,
I had the exact same issue, only Download Mode and RAM Dump, but could not enter recovery mode. Tried flashing many ROMs, oneclick unbrick, Heimdall recovery etc. but still no solutions available, I tried many-many tricks with no luck. So I went to Samsung Service Center, and it turned out that the problem is in the mainboard. It took me one night before Samsung replaced the mainboard from my phone and it's been working well since. All free of charge.
I hope your warranty is still valid. Good luck.
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
reflash the XXKPI/XXKPK 2.3.4 then flash the cmw, xxkpi and xxkpk is the safest stock gb rom to install
Flash odin and go to recovery mode and wipe.
It should work.

i can't go into recovery or download mode after flashing

Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?
dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.
dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).
Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this
Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app
Why will it be hardbricked if the custom roms are based on s5830i stock roms?
But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium
Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .
Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app

[Q] Galaxy Mini softbrick

Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
IT'S EASY!
ljcrisanto said:
IT'S EASY!
Click to expand...
Click to collapse
Download mode still work? why you no flash it to previous stock ROM then?
ljcrisanto said:
IT'S EASY!
Click to expand...
Click to collapse
Dafuq dude. You saying easy without giving solution, you dum* b*tt ! Your Mini are bricked too right ? While you asking are there is anyone said IT'S EASY ! like you did ? Heh... n00bies are trying to be a Master without having any knownledge.
Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
If the download mode still works then it is easy to do ....
Go to this page
Select Type [Smartphone]
Select OS [Android]
Select Model [your phone model]
Select Country [your country]
Then click on SEND
The page will show you current firmware and additional files ...
Download firmware ....
Download flash program from additional files ...
Then flash it ...
I cannot get the files
Originally Posted by shwe
the download mode still works then it is easy to do ....
Go to this page
Select Type [Smartphone]
Select OS [Android]
Select Model [your phone model]
Select Country [your country]
Then click on SEND
The page will show you current firmware and additional files ...
Download firmware ....
Download flash program from additional files ...
Then flash it ...
Click to expand...
Click to collapse
I cannot find the files to flash!
dxkpd
http://droidangel.blogspot.com/2011/05/samsung-galaxy-mini-s5570-original.html
Did it work?
Thanks but it failed even if i tried with odin and so samething happens
Zunmun said:
I cannot find the files to flash!
Click to expand...
Click to collapse
U need to register to see the Firmware and flashprogram download link ....
Zunmun said:
Thanks but it failed even if i tried with odin and so samething happens
Click to expand...
Click to collapse
can u tell little more details on what really happen ...?
What really happened
shwe said:
U need to register to see the Firmware and flashprogram download link ....
can u tell little more details on what really happen ...?
Click to expand...
Click to collapse
You know from the first post, the galaxy mini just kept showing that comupter to phone screen as shown before mentioned in the first post
thats the download mode with different screen
just connect and flash a 4 package file with odin
Try this Odin 4.42
download from here bit.ly/URolWT oh wait, don't download from there ... that's for UK stock roms ... wait I'll find for your country.
---------- Post added at 11:12 AM ---------- Previous post was at 11:04 AM ----------
Singapore stock rom bit.ly/URq9iz
asc1977 said:
I want to flash my gt-s5570i with original stock rom from sammobile with odin. But i have only a *.md5 file and odin wants more. Use odin 1.84
Can someone show me the way how. In the moment its bricked and didnt start.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
For GT-S5570i, only Odin version 1.84 and 1.87 can detect the phone.
Unfortunately both version doesn't have the one package option to flash ....
So u need to split the original md5 file into PDA, PHONE and CSC 3 package files.
As the splitting md5 file is quite complicated just download following 3 files,
all this files were used to flash my GT-S5570i
(split from Original Samsung Firmware Android 2.3.6 released on October 2012) ...
For PDA
Download this
For PHONE
Download this
For CSC
Download this
For Flash Program & pit file
Download this
Don't forget to UNCHECK the Re-partition box.
If u want your country firmware to be split then give me your link.
I will split and upload it for u.
try to recovery by odin.
bielphc said:
try to recovery by odin.
Click to expand...
Click to collapse
Hey, n00bs. Don't fool people by your half knownledge.
He already tried that. CAN YOU EVEN READ THIS TEXT !?
Zunmun said:
You know from the first post, the galaxy mini just kept showing that comupter to phone screen as shown before mentioned in the first post
Click to expand...
Click to collapse
If u access download mode, flash stock rom, (donwload one from http://forum.xda-developers.com/showthread.php?t=1551586 and flash) If it fails. Check your samsung drivers, thats often a reason why it fails, but i suppose u have them. Don't stop the flashing process until the odin says Pass in a blue box. If flashing fails even then.... its service center or if u can, use a usb jig. That's all i can think of..
Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
Full wipe and flash again with odin downloader..
Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
Flash new rom
Download
1.odin multidownloader
2.Samsung phone usb driver
3.Firmware
Visit http://samfirmware.com
Register to forum and you.can find them
Sent from my GT-S5570 using xda app-developers app
If ODIN doesn't work turn on your phone put it on the ground and pray until is working.
Boooooooo!.....did I scared you?

[Q] My Galaxy Note(SHV-E160L) is bricked...

before writing, I'm so sorry for my pooooor English.
I live in Toronto, Canada. I bought my Galaxy Note(SHV-E160L) from Korea, so change sim card from LG U+ to Rogers.
but when I sleep, Note encounter Unlimited Reboot.
so I try to repair in 3-way.
first, Factory reset. but I could make Download mode only, couldn't make Recovery mode.
so I try Samsung Kies Recovery mode, but Kies show me binery Error.
last, I want to use ODIN, but ODIN show me Error Message, too.
"Complete(write) operation failed"
What this means?
If it can't be repaired, I must send my cell phone to Korea.
I'm very embrassed...
please help me!!
and Merry Christmas for you
Is it sticking on factoryfs.img in ODIN ? this usually means its bricked which kernel where you on when you did the factory reset ?
I had a similar issue last week, stuck in odin, everything failing, I was convinced it was bricked, I manage to repair it by (no joking here) flashing a million wrong things in ODIN.... But DO NOT TRY THIS lol
try to flash a safe kernel through ODIN, and then see if it bring back recovery, then you can wipe and flash a new rom (hopefully)
otherwise there is the pit file method to revive from a brick, which works well, but loses around 3gb of internal sd space
hello
hello bro...
try this method:
download a stock gingerbread rom then go into download recovery, flash it with odin, root your phone.
from here you can install any custom rom, this is how i do when i got bootloop.
Thanks for your reply
hanzo777 said:
hello bro...
try this method:
download a stock gingerbread rom then go into download recovery, flash it with odin, root your phone.
from here you can install any custom rom, this is how i do when i got bootloop.
Click to expand...
Click to collapse
Thanks, but when I use ODIN, ODIN got a trouble..
when It start to flash, ODIN shows error message (Complete(write) operation failed)..
so even I can't try another Kernel Files..
Sigea said:
Thanks, but when I use ODIN, ODIN got a trouble..
when It start to flash, ODIN shows error message (Complete(write) operation failed)..
so even I can't try another Kernel Files..
Click to expand...
Click to collapse
Perhaps should follow closely the guide for using odin from Dr ketan should help:
http://forum.xda-developers.com/showthread.php?t=1424997
1. Installation
- Download stock ROM (should start with a GB rom), and extract it to .tar file
- Download Odin, open it
- select PDA tab and point to ROM file. Leave Re-partition, pit, CSC, Phone tab unticked.
- Switch off device, Put in download mode (Vol down + Home + Power)
- completely close kies, Anti virus if running
- Connect device to PC
- ID com port shud turn yellow (not shown in image)
Now hit Start
----
see how it goes.
Same problem as OP
Hello guys,
unfortunately, I have the same problem with my 32GB SHV-E160L as OP. Little backstory:
I bought the GNote in Korea and brought it back to my country. I successfully rooted it with one of the guides here on XDA (Tegrak kernel, no OC whatsoever). No problems so far, the phone worked for weeks and I was able to do what you can do with rooted phones. One day while surfing the net it just crashed and was stuck in a boot loop. This is where I am now.
I tried:
Go into tegrak recovery. result: It gets stuck on samsung logo, funnily the phone would establish a usb connection if plugged in (as if in download mode)
Reset from Kies. result: After beeing told by Kies to go into download mode, instead of flashing the new software it gives an error message in Korean about missing binaries (see attachment)
Flash from odin. result: the dreaded red box with "fail" appears after the NAND write command
Now, after doing my research here on XDA I found out that my emmc might have damaged partitions and I need a PIT file. Here's where I'm stuck.... I can't find a PIT file for my 32GB note, only for the N7000 or the I717. And I don't want to mess things further up... so if anyone here could provide me with a PIT file, or tell me how to fix the phone through other means I would be really grateful
Thanks in advance....
You should ask hg42 if he can make one - in his thread I read that he did this before even for other devices.
So try a pm or post in his thread. Good luck

Categories

Resources