Hi
i got rooted my moto x 2014 xt 1092 with MOTO_X_2014_PURE_MULTI_TOOLV4.1 and had recently flahed stock marshmallow 6.0 but after this lost root access and used the same tool to gain root access but mistakenly flashed android 5.0 and my device is stuck at error(moto has stopped working) and keeps on rebooting.
Now the problem is i am not able to enable usb debugging. so i am not able reflash marshmallow and after loosing root access TWRP back up has also been deleted.
Can anyone help me how can i flash marshmallow without usb debugging enabled.
Do you have access at twrp recovery or not? So if yes, download "stock+" rom from the link below and make a clean install through usb otg in TWRP. Then you can enable USB debugging from developer settings and you can revert back to stock via fastboot mode.
The basic for all these, is to have access at TWRP recovery.
http://forum.xda-developers.com/moto-x-2014/general/rom-stock-t3361470
Related
Hi, My device model is XT1068
I wanted to flash stock rom so i downloaded PURE EDITION stock rom from http://forum.xda-developers.com/moto-g-2014/development/rom-stock-lollipop-rom-t3024800,
then i Switched off the mobile opened bootloader using power button & volume up,
connected to fastboot, opened cmd when i typed adb reboot-bootloader, i get this error message
adb server is out of date. killing...
* daemon started sucessfully *
error: device not found
Then downloaded latest Minimal ADB and Fastboot, same problem now it shows error: device not found but i can flash, erase using fastboot.
So i downloaded [Windows Tool] Moto G 2014 XT1063/64/68 Restore to to Stock Android 4.4.4/5.0.2
http://forum.xda-developers.com/moto-g-2014/development/rom-stock-lollipop-rom-t3024800
this method was very simple,
opened auto restore script it flashed stcok rom in less than five minutes,
but now after flashing, then in setup after google accounts & migrate it shows unfortunately setup has stopped then home screen is black & it shows system ui has stopped, nothing is working.
Re-installed it once again but same error black screen nothing is working, only on top sim network is visible.
Finally tried to install Pure stock rom from recovery,
it shows failed error,
error executing updater binary in zip
Please anyone help me, i've ran out of ideas what to do?
Mmmm if i was you i will reset everything and then go to Cynanogenmod Nightlys for your device if nothing is working. If cynanogenmod doesn't work go try a different rom
Pure Edition XT1068 ROM is flashable zip which is to be flashed using CWM/TWRP and not via fastboot mode. Update your TWRP recovery to latest 2.8.6.0 and then flash the Pure Edition ROM zip.
Here is the link to update your TWRP http://forum.xda-developers.com/moto-g-2014/general/xt1063-t3018818
If you want to flash Stock Firmware (Stock ROM+Stock Recovery+Stock Boot Logo+Everything Stock) the manual way here is the guide
https://drive.google.com/open?id=1ar9damfHu5ryeeIjOds4oiG9PavKA2N5HUKR3wyMQ_8&authuser=0
Hope it helps
sharkymyn said:
Pure Edition XT1068 ROM is flashable zip which is to be flashed using CWM/TWRP and not via fastboot mode. Update your TWRP recovery to latest 2.8.6.0 and then flash the Pure Edition ROM zip.
Here is the link to update your TWRP http://forum.xda-developers.com/moto-g-2014/general/xt1063-t3018818
If you want to flash Stock Firmware (Stock ROM+Stock Recovery+Stock Boot Logo+Everything Stock) the manual way here is the guide
https://drive.google.com/open?id=1ar9damfHu5ryeeIjOds4oiG9PavKA2N5HUKR3wyMQ_8&authuser=0
Hope it helps
Click to expand...
Click to collapse
Batch file was missing in auto restore script, got help from other thread, now [Windows Tool] Moto G 2014 XT1063/64/68 Restore to to Stock Android 4.4.4/5.0.2 http://forum.xda-developers.com/moto-g-2014/development/rom-stock-lollipop-rom-t3024800 is working fine.
DreamExtractor said:
Batch file was missing in auto restore script, got help from other thread, now [Windows Tool] Moto G 2014 XT1063/64/68 Restore to to Stock Android 4.4.4/5.0.2 http://forum.xda-developers.com/moto-g-2014/development/rom-stock-lollipop-rom-t3024800 is working fine.
Click to expand...
Click to collapse
But still i cant install pure edition stock rom via recovery, even updated the recovery same problem,
failed error,
error executing updater binary in zip.
Try downloading the ROM again and place it in internal sdcard and then flash.
I tried to flash CM 12.1 on my Moto G but everytime I try it says I have to have bootloader 0x4882 or 0x4883. I have the binaries of 0x4882 but I can't install them because I cant use fastboot. I have a chromebook and there are apps for ADB but they don't have fastboot. Also, I can't install fastboot with this thread: http://forum.xda-developers.com/showthread.php?p=38232908#post38232908 .Any help?
You will need a Windows based PC / Laptop to update your bootloader.
Via fastboot mode you will have to flash updated bootloader files on your Moto G2, only then you can install CM12.1 based ROMs
Not possible without pc......its very easy...follow the original thread of updating bl by gregor.....i did that....now im in rom heaven
My moto g xt 1068 is running on lollipop 5.0.2. I unlocked the bootloader ,granted root access and flashed twrp recovery.
I want to flash cyanogen mod but my micro sd card slot is broken
Is there any way to flash cyankgen mod?
Please help
there is an option in TWRP that uses the USB OTG so you can simply flash it from there
Yaa but moto g isn't supporting usb otg after lollipop update
I'm kind of new to this but can't you just ADB sideload it?
hello guys
i have a motorola turbo model XT1254 with Version.23.21.44. installed on it, i wanted to flash twrp as custom recovery.
i rooted the phone using kingroot and flashed the twrp, after flash the phone only boots in to bootloader , even in recovery mode i did factory reset but after rebooting still its coming back to bootloader. I dont know its bricked or what,
is there any way to sideload or any other way to flash its original rom?
thanks
is your bootloader unlocked?
were you on marshmallow or lollipop?
qualcomm boasts there processes are unbrickable.
if you brick them they will go 9008 mode on you.
with the right tool you can make it come back to life.
if you used the temproot method for 5-5 lollipop it wont boot back without removing it.
can you access fastboot?
do you have your current stock rom?
Hi,
I was trying to install lineage os on my Moto X Play.
I unlocked my phone and I installed TWRP.
After that I formatted the phone and I executed the advanced wipe of cache and system.
Now the phone it is blocked and it reboot continuously and I canot access in recovery and I cannot see the phone from my pc with adb.
What can I do?
Thanks
abdujaparov said:
Hi,
I was trying to install lineage os on my Moto X Play.
I unlocked my phone and I installed TWRP.
After that I formatted the phone and I executed the advanced wipe of cache and system.
Now the phone it is blocked and it reboot continuously and I canot access in recovery and I cannot see the phone from my pc with adb.
What can I do?
Thanks
Click to expand...
Click to collapse
If you can access fastboot you can flash stock firmware
Sent from my Moto X using Tapatalk