Hi,
I bought a Xiaomi mi5 from gearbest, it arrived with a vendor version of miui 7.3.x.x. Since didn't want to install any custom rom, I didn't unlock the bootloader. I tried to install the global miui 8, directly from updater app, as I have done with other xiaomi phones, but didn't work.
Then I tried to flash from recovery with no luck, and then I tried to install with miflash and EDL mode. After some tries, I ended with a bricked phone...
At the moment, the phone doesn't boot normal and doesn't boot into recovery mode either, doesn't turn on at all. The led only blinks red when battery is too low, after charging it a bit, it stops.
But is recognized as Qualcomm qdloader 9008 by the pc, I try flash again through miflash with different official fastboot rooms versions and different miflash versions, it flash with sucess but the phone is still dead.
I already read really a lot of sites and forums and tried the recommend solution, but the phone is still dead. Only solution that I didn't test yet is with qpst, a tool for Qualcomm SOCs unbrick.
Any ideas?
Hi i have The same problem, have you solution?
drtanino said:
Hi i have The same problem, have you solution?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Related
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
I ve little same issue. need help too.
I have Mi A2 runnig on android8.1
but it didnt update 9.0
so I try with twrp but fail no boot anymore.
I use miFlash tool. accdently I locked phone. flashed rom didnt boot.
now I ve just fastboot mode. or open 'android one' screen and then goes black.
I try EDL mode by test point inside phone.
flash with 2018 mi Flash tool but stuck in flashing...
flash with 2016 mi Flash tool write succesful flashed afte 6min. but not boot.
I read 2 days on forums. cant find anything to do.
is there any solution?
thanks
Hi, has anyone made any progress?
Theduardds said:
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
Click to expand...
Click to collapse
A year ago i had the same issue kinda. The only thing that worked for me was flashing mi 6x stock rom and after some trial an error it flashed and it fixed. The only problem is i have a mi 6x forever. Basically download mi 6x stock rom. Try that mi flash tool and keep hard rebooting and click flash button right after it vibrates. If lucky sometime will work and flash. If nothing try older versions of mi flash tool. Good luck.
all of you have the same problem ... you bootloop into edl mode because you have ARB4 triggered ..that means the only stock you can flash in miflash is ARB4 rom ( latest most up to date )
you also need patched programmer file since flashing ARB4 requires miui account
the fix to this problem is documented everywhere and explained lots of times ...just read ..follow this guide and one-click tool to unbrick
next time read ......a little ..
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
Hi i unlocked my bootloader earlier today, worked fine. Got twrp, fine. then tried to copy roms to my phone to flash but couldn't see the phone so rebooted, then twrp wouldn't load was stuck in fastboot.
So tried to miflash back to stock rom and now device is not even showing fastboot just black screen. Can see qualcomm hs-usb qdloader 9008 in device manager when device is connected.
What files do i need to unbrick? i think when i went back to recovery i installed davinci and not raphael. Would this have bricked? How to unbrick? I need EDL?
Model is: M1903F11G
Any help, thanks.
ldyte3 said:
Hi i unlocked my bootloader earlier today, worked fine. Got twrp, fine. then tried to copy roms to my phone to flash but couldn't see the phone so rebooted, then twrp wouldn't load was stuck in fastboot.
So tried to miflash back to stock rom and now device is not even showing fastboot just black screen. Can see qualcomm hs-usb qdloader 9008 in device manager when device is connected.
What files do i need to unbrick? i think when i went back to recovery i installed davinci and not raphael. Would this have bricked? How to unbrick? I need EDL?
Model is: M1903F11G
Any help, thanks.
Click to expand...
Click to collapse
Sadly Yes same happen to my friend
u need EDL mode + authurized xiaomi account to flash the fastboot rom
Antidote03 said:
Sadly Yes same happen to my friend
u need EDL mode + authurized xiaomi account to flash the fastboot rom
Click to expand...
Click to collapse
Ok thanks, i try miflash but get error cannot get hello packet.
how do i get EDL mode?
You flashed mi 9t recovery on mi 9t pro?
ldyte3 said:
Hi i unlocked my bootloader earlier today, worked fine. Got twrp, fine. then tried to copy roms to my phone to flash but couldn't see the phone so rebooted, then twrp wouldn't load was stuck in fastboot.
So tried to miflash back to stock rom and now device is not even showing fastboot just black screen. Can see qualcomm hs-usb qdloader 9008 in device manager when device is connected.
What files do i need to unbrick? i think when i went back to recovery i installed davinci and not raphael. Would this have bricked? How to unbrick? I need EDL?
Model is: M1903F11G
Any help, thanks.
Click to expand...
Click to collapse
ldyte3 said:
Ok thanks, i try miflash but get error cannot get hello packet.
how do i get EDL mode?
Click to expand...
Click to collapse
u need to open ur device and do test point ... search in youtube for k20 pro test point
Antidote03 said:
u need to open ur device and do test point ... search in youtube for k20 pro test point
Click to expand...
Click to collapse
no way man, its new phone, how i can do it without opening?
Hey guys,
I need some assistance as I am not able to unbrick my RM3 with unbrick tool. Multiple times I have already got it worked, flashed many times, but this time I am not getting my phone started. Normally, I use the NON-EU unbrick tool, all goes well but this time, it says THIS DEVICE CAN'T BE TRUSTED, WON'T BOOT UP. After multiple tries, I tried that EU unbrick too as well, but the same result.
I think I have locked the bootloader while on CN Rom 5.14, most probably this is the only reason, I was doing some tweakings and got it bricked. Anyone here who can tell me if there is such thing named CN Unbrick tool or any other way around to get it worked. I can enter FASTBOOT and EDL Mode but recovery mode showing black screen and adb is not recognising as didn't enable USB debugging. please help...
[email protected] said:
Hey guys,
I need some assistance as I am not able to unbrick my RM3 with unbrick tool. Multiple times I have already got it worked, flashed many times, but this time I am not getting my phone started. Normally, I use the NON-EU unbrick tool, all goes well but this time, it says THIS DEVICE CAN'T BE TRUSTED, WON'T BOOT UP. After multiple tries, I tried that EU unbrick too as well, but the same result.
I think I have locked the bootloader while on CN Rom 5.14, most probably this is the only reason, I was doing some tweakings and got it bricked. Anyone here who can tell me if there is such thing named CN Unbrick tool or any other way around to get it worked. I can enter FASTBOOT and EDL Mode but recovery mode showing black screen and adb is not recognising as didn't enable USB debugging. please help...
Click to expand...
Click to collapse
I think any unbrick tool should work both EU and non EU
you must pc driver uninstall reboot pc driver install again reboot your pc and also check your port number eld mode
red magic 3 driver reinstall in may case port number change automaticly i m notice this point it will help you to start your device red magic 3
Hello. Sorry for my poor english.
I have xiaomi redmi 9t lime hardbriked.
No recovery, no fastboot, no boot...
The bootloader is unlocked.
The only hope left is flash stock rom în edl.
I put my phone in edl mode with test point.
Drivers ar corectly installed and Phone is properly recognized in device manager.
The big problem is I can't flash with MI flash because I don't have Authorized Account and Qfil/Qpst wont work.
The stock firmware is redmi 9t lime global fastboot version.I try everything with qfil with no succes.
I need a patched firehose file or a working solution to flash stock firmware în edl.
Thanks a lot.
Any fix please
If you want to have a functional phone, and you have limited skills, don't mess with your rom ffs...or use Miracle Xiaomi Tool Login Edition...pay someone to help you.
just install Miflash and Lastest fastboot Firmware then unpack it and copy this file (firehose) inside the image file ( Replace the old one) and start flash
AhmedSamir72 said:
just install Miflash and Lastest fastboot Firmware then unpack it and copy this file (firehose) inside the image file ( Replace the old one) and start flash
Click to expand...
Click to collapse
Thanks a lot! I have the nearly the same problem like @autototal . My phone stopped working and is only recognized as QDLoader 9008. The strange thing in my case is that I had a working Pixelblaster ROM for month on it and it just died without a reason. I never opened the back to bring it to EDL mode.
Anyway... I also got the "only nop" error in the Mi Flash Tool. I tried flashing it with your firehose_ddr.zip and IT WORKED. But then I tried to turn on the phone and it is still in the same state as before (only QDLoader 9008 and no fastboot or anything). Do you have any idea what I could do to bring it back to live?
Thanks a lot
furiousjay said:
Thanks a lot! I have the nearly the same problem like @autototal . My phone stopped working and is only recognized as QDLoader 9008. The strange thing in my case is that I had a working Pixelblaster ROM for month on it and it just died without a reason. I never opened the back to bring it to EDL mode.
Anyway... I also got the "only nop" error in the Mi Flash Tool. I tried flashing it with your firehose_ddr.zip and IT WORKED. But then I tried to turn on the phone and it is still in the same state as before (only QDLoader 9008 and no fastboot or anything). Do you have any idea what I could do to bring it back to live?
Thanks a lot
Click to expand...
Click to collapse
I had the exact same issue. A perfectly working phone for 3 months. Then I turn it off one day and it won't turn back on. I couldn't get MiTools to flash it no matter what I tried.
I found a set of videos that detail removing a capacitor from the main board.
This worked to get my phone booting again with no issues. It may be worth a try if all else fails and you need your data and/or aren't covered under warranty.
AhmedSamir72 said:
just install Miflash and Lastest fastboot Firmware then unpack it and copy this file (firehose) inside the image file ( Replace the old one) and start flash
Click to expand...
Click to collapse
Work like a charm!
Big Like
I have my friends Xiaomi mi 8. It keeps freezing on the miui screen when booting up. It simply won't boot up. The bootloader is locked and I've tried everything. I've tried flashing new firmware via fastboot I've tried flashing twrp and orange fox I've even tried tried flashing pixel experience but the bootloader doesn't allow it. I've downloaded the XiaoMitool v2 and mi flash tool but nothing is working. When I boot to recovery and try to wipe data it just gives an error saying it's failed. I tried using the edl boot bat file and when it reboots to edl it just restarts and freezes on miui. ive tried edl from the back pins on the phone but the computer isnt recognising it and ive got the qualcom drivers installed but still no luck. Also when I try flashing miui fastboot firmware the program gives an error saying something about the flash script. Is there anything I can do to fix it or to atleast unlock the bootloader remotely without the need of the phone being turned on? ive heard of the msm tool but i coulnt find anything for the mi 8 only oneplus. Any help is appreciated thanks!