Hello guys, so, today i was trying to install miui 9 in my mi a2, then later going to update to miui 10. I was trying to install by flash mode (XiaoMiFlash) Everything was going fine, until my windows accidently turned off for updates (RIP). When my pc turned on, i was desperately opening miflash as fast that i could, but then when i try to install again it was saying "cannot recieve hello packet". I tried to restart it thinking that would fix it, but its just stuck in a MI logo with mi.com screen(Bootloop). I was trying to unplug usb cable and then putting again trying to fix it, clicking refresh to see if it appears, but it doesn't. Same with fastboot mode, doesn't get recognized. I really need help to fix it and sorry if i wrote something wrong, english is not my native language.
Same problem happened with me today. Any Solution?
Are you able to boot into fastboot?
Something similar happened to me once with the A2.
I somehow too managed to interrupt some update process and got stuck in the same scenario.
I could resolve it by getting one of these now superseded fastboot stock files with some installer scripts in them.
The scripts also wouldn't work, but I could install the firmware files one by one manually, following the script's content.
First off though, you could try to get into fastboot mode (as mentioned before), boot the official twrp img and flash the latest firmware zip file from here
Then you could go ahead and flash miui for the A2 like any other custom ROM (or did you just post in the wrong section and actually got an 6X? - seeing that you used miflash, it really seems like it..
Just in case here is the right thread for downloading miui for the A2: A2 miui port)
Yaroray said:
Are you able to boot into fastboot?
Click to expand...
Click to collapse
Hey, sorry for not awnsering for a long time. Yes, i can enter in fastboot, but the problem is that my MI A2 doesn't get recognized. (nothing happens if i try to flash it in fastboot mode).
i same that trouble, i can try to bootloader but when i connect usb to my pc it not recognized, i don't run anycommand from my PC,
I think if i change to second slot i will boot my phone, and i want to change slot without command "fastboot set active-slot "
Hello. Sorry for my poor english.
I have xiaomi redmi 9t lime hardbriked.
No recovery, no fastboot, no boot...
The bootloader is unlocked.
The only hope left is flash stock rom ÃŪn edl.
I put my phone in edl mode with test point.
Drivers ar corectly installed and Phone is properly recognized in device manager.
The big problem is I can't flash with MI flash because I don't have Authorized Account and Qfil/Qpst wont work.
The stock firmware is redmi 9t lime global fastboot version.I try everything with qfil with no succes.
I need a patched firehose file or a working solution to flash stock firmware ÃŪn edl.
Thanks a lot.
Any fix please
If you want to have a functional phone, and you have limited skills, don't mess with your rom ffs...or use Miracle Xiaomi Tool Login Edition...pay someone to help you.
just install Miflash and Lastest fastboot Firmware then unpack it and copy this file (firehose) inside the image file ( Replace the old one) and start flash
AhmedSamir72 said:
just install Miflash and Lastest fastboot Firmware then unpack it and copy this file (firehose) inside the image file ( Replace the old one) and start flash
Click to expand...
Click to collapse
Thanks a lot! I have the nearly the same problem like @autototal . My phone stopped working and is only recognized as QDLoader 9008. The strange thing in my case is that I had a working Pixelblaster ROM for month on it and it just died without a reason. I never opened the back to bring it to EDL mode.
Anyway... I also got the "only nop" error in the Mi Flash Tool. I tried flashing it with your firehose_ddr.zip and IT WORKED. But then I tried to turn on the phone and it is still in the same state as before (only QDLoader 9008 and no fastboot or anything). Do you have any idea what I could do to bring it back to live?
Thanks a lot
furiousjay said:
Thanks a lot! I have the nearly the same problem like @autototal . My phone stopped working and is only recognized as QDLoader 9008. The strange thing in my case is that I had a working Pixelblaster ROM for month on it and it just died without a reason. I never opened the back to bring it to EDL mode.
Anyway... I also got the "only nop" error in the Mi Flash Tool. I tried flashing it with your firehose_ddr.zip and IT WORKED. But then I tried to turn on the phone and it is still in the same state as before (only QDLoader 9008 and no fastboot or anything). Do you have any idea what I could do to bring it back to live?
Thanks a lot
Click to expand...
Click to collapse
I had the exact same issue. A perfectly working phone for 3 months. Then I turn it off one day and it won't turn back on. I couldn't get MiTools to flash it no matter what I tried.
I found a set of videos that detail removing a capacitor from the main board.
This worked to get my phone booting again with no issues. It may be worth a try if all else fails and you need your data and/or aren't covered under warranty.
AhmedSamir72 said:
just install Miflash and Lastest fastboot Firmware then unpack it and copy this file (firehose) inside the image file ( Replace the old one) and start flash
Click to expand...
Click to collapse
Work like a charm!
Big Like
Yesterday I unlocked my phone with the official Xiaomi unlock tool, Then it wiped everything, after setting my phone up, I flashed TWRP (not for my device but for redmi k20, I thought 9T and K20 is the same) and now I'm stuck on fastboot, I tried power button + volume buttons but still stuck on fastboot, I tried adb but still stuck, I tried Reiboot for Android but still stuck. So I used XiaoMiTool V2 (unofficial) and selected 'my device is bricked' then it asked me to select what device am I using, I selected k20 bc I thought it's the same with redmi power, after downloading a rom for an hour, it tries to install but fails because it detects that it's not k20, so I closed it and rebooted my device, now my device only shows the charging battery icon, can't boot into fastboot, can't boot into anything, PC can't detect my phone including adb. Please help me (for free), I really need your help. Thanks!
Your mistake was booting a wrong twrp and then a wrong fastboot rom. You could have saved your device when it was in fastboot mod by flashing an official fastboot rom for your device. But now your device seems hopeless. I think you have no option but to send it to a service center.
In this Case, buy only from Trusted Places! Or Learn how to Flash properly.
If the bootloader is unlocked...
Flash vbmeta.img
Then flash the suitable recovery for 9 power... It might boot to recovery then
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Obi_Wlan said:
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank but phone simply dont booting to fastboot mode.
Durien Daragoth said:
Thank but phone simply dont booting to fastboot mode.
Click to expand...
Click to collapse
You have to experiment with some button combinations. I ran into the same problem with a different phone two years ago. Read everything about this even if fastboot isn't working right now.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com
Service centre will be your best bet
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Player__y said:
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Click to expand...
Click to collapse
If you have any, let me know on discord, ððððĶðð#2028
Thx but phone dont booting to fastboot mode so i cant flash boot.img i tryed now SP Flash too in linux and still same errors becouse phone disconecting too fast. I think technician service will be solution..
Dont use The daanm Sp flash Tool , Its for mediatek devices, USE Miflash, and Its impossible a phone dont boot in fastboot mode, try again, pls hold The button
I have both Mi flash and SP flash tool
Without fastboot you cant do much...
in Miflash it dont do anything even device it dont see on COM3
in SP flash too it react but with errors becouse of disconecting
phone dont boot right becouse both A and B boot images are corrupted.
Does your screen at boot turn red? I've done everything on my cell phone, several things have happened to me and not once did fastboot have a problem, because fastboot is a totally different place to boot, there is only this possibility if you used commands in adb to remove or do something in fastboot that made it useless, it's impossible to happen this in the way you said
yes i did adb commands in fastboot becouse i instaled recovery and this all happend after reboot
no problem doing things in adb, I said in the sense that you deleted fastboot in adb but that didn't happen by the way you said
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Click to expand...
Click to collapse
I tryed but not succes. It just booting every 5s nowhere. Cant get to EDL mode sorry. And correct turn off phone isnt possible i have to unplug battery flex cable but i also tryed. Only possible state where it dont restarting is when battery is unpluged and i connect phone on cable with pc and pressing volume down+power. But connection to COM3 is only 2s.
Well, in that case you need to short the test points on your motherboard and plug the phone into your PC at the same time.
Watch several videos related to it on YouTube first.
Wait, is your phone Redmi Note 11 or 11s?
I will try the point test. I have Redmin Note 11s.
Ahhhh...you posted it on Note 11 forum.
Can't help you mate. Things are more complicated in mediatek devices.
Still, this thread might help a little. Good luck.
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
Now i have bit progress with python im able to hold COM3 port connection around 60s. But when i start SP Flash Tool it will always make error. STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and STATUS_ERR (0xC0010001) , STATUS_BROM_CMD_FAIL
I finally managed to connect device for longer time cca 1 min with MTKMETAUtilityV49 and it helped me also disable auhorized connection for SP Flash tool V5. By this i formated whole disc except bootloader. Now phone dont self restarting so it is prepared for instal fresh rom. I think this will be again problem becouse i geting this error after few seconds of flashing: STATUS_SEC_IMG_TOO_LARGE
I have my friends Xiaomi mi 8. It keeps freezing on the miui screen when booting up. It simply won't boot up. The bootloader is locked and I've tried everything. I've tried flashing new firmware via fastboot I've tried flashing twrp and orange fox I've even tried tried flashing pixel experience but the bootloader doesn't allow it. I've downloaded the XiaoMitool v2 and mi flash tool but nothing is working. When I boot to recovery and try to wipe data it just gives an error saying it's failed. I tried using the edl boot bat file and when it reboots to edl it just restarts and freezes on miui. ive tried edl from the back pins on the phone but the computer isnt recognising it and ive got the qualcom drivers installed but still no luck. Also when I try flashing miui fastboot firmware the program gives an error saying something about the flash script. Is there anything I can do to fix it or to atleast unlock the bootloader remotely without the need of the phone being turned on? ive heard of the msm tool but i coulnt find anything for the mi 8 only oneplus. Any help is appreciated thanks!