Radio/baseband India for Imported M7 - One (M7) Q&A, Help & Troubleshooting

I got a imported one m7 yesterday in India. i bought it from ebay India. Its rooted with ressurection remix ROM loaded. The ROM is good.
My problem is the phone cannot detect network signal in my office room. But out of my office, it is able to detect signals. Other phones don't have this problem.
It means the problem is related to radio or baseband.
How do I know which version of M7 is this. And which radio/baseband file can be flashed on this.
From the box it seems to be from Germany as specifications are written in German.
Kindly let me know.

Some information:
RADIO version 1.02.20.0922 and
HBOOT version tl 1.61.0000
Seems sprint m7 to me.
Can I flash T-Mobile or at&t modems?
Or any specific Indian baseband from Indian ruu.

lekhwani said:
Some information:
RADIO version 1.02.20.0922 and
HBOOT version tl 1.61.0000
Seems sprint m7 to me.
Can I flash T-Mobile or at&t modems?
Or any specific Indian baseband from Indian ruu.
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" (remove your imei and serialno).

alray said:
Post the output of "fastboot getvar all" (remove your imei and serialno).
Click to expand...
Click to collapse
Will do tomorrow as its.
Thanks

Hey! I got the following info.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 1.02.20.0922
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s

lekhwani said:
Will do tomorrow as its.
Thanks
Click to expand...
Click to collapse
I got the following info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 1.02.20.0922
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s

lekhwani said:
I got the following info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 1.02.20.0922
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
Its a sprint/cdma phone. Not the best variant when using a gsm network...

alray said:
Its a sprint/cdma phone. Not the best variant when using a gsm network...
Click to expand...
Click to collapse
By this I understand that t mobile and at&t baseband cannot be flashed onto this?
And, if above is right, can I flash some other sprint baseband (older/newer)?
And, will CDMA sim work in India?

Can someone tell me how I can install a lollipop ROM on this resurrection remix (marshmallow)
I want to try lollipop as I read somewhere about LTE single bar to multibar signal after changing some entry of SKU id etc in default.XML file.
I can't find that file in marshmallow.

lekhwani said:
Can someone tell me how I can install a lollipop ROM on this resurrection remix (marshmallow)
I want to try lollipop as I read somewhere about LTE single bar to multibar signal after changing some entry of SKU id etc in default.XML file.
I can't find that file in marshmallow.
Click to expand...
Click to collapse
Sprint phone will only get LTE if connected to Sprint (not the same LTE band as the gsm variant).
The only roms that can be flashed on this phone are Sprint compatible custom roms (see sprint htc one forum), these roms made specifically for that variant and most likely don't need any sku id modification to "improve" your signal
Custom roms can be flashed using TWRP recovery. MAke sure to flash Sprint custom roms and to use Sprint TWRP.

Related

m7_u / m7_ul 4.2.2 confusion - need help

Hi Guys,
My ONE is from India and has the same model number as the Taiwanese version PN0711000 and model 801e / m7_u . I had already flashed ARHD 11.5 with its firmware provided by baadass .Now the question is should i stay on 2.24.709.1 and not 2.24.401.1 as that would be better for my phone???
Also when a do a fastboot getvar all i get the below output :
Code:
D:\adt-bundle-windows-x86_64-20130219\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.709.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: <something you shouldn't know>
(bootloader) imei: <wont matter anyways>
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4155mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae095083bf
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.075s
D:\adt-bundle-windows-x86_64-20130219\sdk\platform-tools>
This looks to be the same as what everyone is getting after flashing the .401.1 firmware. So can anyone confirm , should i stay at 709.1 or move to WWE 401.1 roms?
the only difference in the formware i see is that of the radio the .401 radio ends in a "L" and my radio ends in a "D" , which could be the difference between LTE and non-LTE. Am i right?
Thanks
Can anyone please answer my query?
Honestly, I don't think it makes any difference. If you're having no problem running a ROM from a different region, you don't need to worry about anything else ^^

[Q] Flashed the wrong radio, need help

Hello There,
I have AT&T m7 and recently just S-OFF
I upgraded from 4.4.2 to the 7.15.401.1 firmware in order to flash the GPE 5.1 rom
But now it looks like I flashed the wrong radio or baseband because my cellular data is no longer working (althought I can still make calls)
Here is the output before I began:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3875mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
ANd here is the output afterwards:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: 4T.33.3218.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.15.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3833mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Please help me, I dont know what I did wrong.
fc3211 said:
Hello There,
I have AT&T m7 and recently just S-OFF
I upgraded from 4.4.2 to the 7.15.401.1 firmware in order to flash the GPE 5.1 rom
But now it looks like I flashed the wrong radio or baseband because my cellular data is no longer working (althought I can still make calls)
Here is the output before I began:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3875mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
ANd here is the output afterwards:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: 4T.33.3218.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.15.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3833mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Please help me, I dont know what I did wrong.
Click to expand...
Click to collapse
You flash stock RUU.exe
Sent from my HTC One using XDA Free mobile app
I did not flash the RUU, I had flashed the firmware 7.15.401.1 from https://docs.google.com/spreadsheets/d/1LQDLpVZYyUpXPgC2sh1BvAS9Oo8B-fTiZU_JhpIH-fU/pubhtml#
And I am thinking that I overwrote the radio with a version that is not proper for my phone.
But I dont really have alot of knowledge about this so please advise me.
fc3211 said:
I did not flash the RUU, I had flashed the firmware 7.15.401.1 from https://docs.google.com/spreadsheets/d/1LQDLpVZYyUpXPgC2sh1BvAS9Oo8B-fTiZU_JhpIH-fU/pubhtml#
And I am thinking that I overwrote the radio with a version that is not proper for my phone.
But I dont really have alot of knowledge about this so please advise me.
Click to expand...
Click to collapse
it wont effect your phone in that way, if you have signal, then go into your apn settings and reset them to defaults, you will then be taken to the first start up page again and have to select your operator again from the list of available operators, like you did when you first got the phone or when you install a new rom.
remove you IMEI and Serial number from your first post, its not good to post them, they guy who quoted you will also need to do the same.
Seanie280672 said:
it wont effect your phone in that way, if you have signal, then go into your apn settings and reset them to defaults, you will then be taken to the first start up page again and have to select your operator again from the list of available operators, like you did when you first got the phone or when you install a new rom.
remove you IMEI and Serial number from your first post, its not good to post them, they guy who quoted you will also need to do the same.
Click to expand...
Click to collapse
Are you certain about this? The fastboot output indicates that the baseband has changed since I flashed the new firmware
fc3211 said:
Are you certain about this? The fastboot output indicates that the baseband has changed since I flashed the new firmware
Click to expand...
Click to collapse
just try it, its not going to hurt, just goto settings - mobile data - access point names - (3dot menu in the top right corner) select that and then select reset defaults.
Of course the baseband has changed, the newer firmware had a newer radio file in it, its not a radio file like your thinking though, its more of a software controller for a piece of hardw2are in your phone, just like every piece of hardware on your computer needs a driver, so does your phone.
The 401 firmware you flashed is basically WWE (World Wide English), if it had messed up you'd probably be hard bricked.
Seanie280672 said:
just try it, its not going to hurt, just goto settings - mobile data - access point names - (3dot menu in the top right corner) select that and then select reset defaults.
Of course the baseband has changed, the newer firmware had a newer radio file in it, its not a radio file like your thinking though, its more of a software controller for a piece of hardw2are in your phone, just like every piece of hardware on your computer needs a driver, so does your phone.
The 401 firmware you flashed is basically WWE (World Wide English), if it had messed up you'd probably be hard bricked.
Click to expand...
Click to collapse
THanks, for explaining that to me
I just tried the same sim card in my galaxy s3 mini (unlocked) and it doesnt work in that phone at all (no calls or data). I think the sim may be defective, will get a new one and try again.
Thanks for your help
Edit: I did as you said in the m7 and even did a factory reset to make sure and results where the same. Looks like I got a bad sim card
@ Seanie280672: Thanks for your help bro
It just started working again after I installed ViperRom 7
Strange thing, just started working out of the blue but I am happy that is is resolved
fc3211 said:
THanks, for explaining that to me
I just tried the same sim card in my galaxy s3 mini (unlocked) and it doesnt work in that phone at all (no calls or data). I think the sim may be defective, will get a new one and try again.
Thanks for your help
Edit: I did as you said in the m7 and even did a factory reset to make sure and results where the same. Looks like I got a bad sim card
Click to expand...
Click to collapse

I cannot edit my apns. Please help!

I updated my phone using the ruu from htc but i used the wrong one i believe I unlocked my phone from tmo and used a tmo update now i cant edit my apns please help
yungvilleprod said:
I updated my phone using the ruu from htc but i used the wrong one i believe I unlocked my phone from tmo and used a tmo update now i cant edit my apns please help
Click to expand...
Click to collapse
Which ruu version did you flashed?
What is the output of "fastboot getvar all"
Why can't you edit your apn? Its grayed out?
alray said:
Which ruu version did you flashed?
What is the output of "fastboot getvar all"
Why can't you edit your apn? Its grayed out?
Click to expand...
Click to collapse
HTC One 7.18.531.2 official ruu from the htc website
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.531.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35FW901053
(bootloader) imei: 355972054404836
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3794mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-331585dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.095s
the image posted
yungvilleprod said:
HTC One 7.18.531.2 official ruu from the htc website
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.531.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35FW901053
(bootloader) imei: 355972054404836
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3794mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-331585dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.095s
the image posted
Click to expand...
Click to collapse
Strange first time i see this. Are you sure your phone is sim-unlocked? Might be related to the TMO version installed on the phone. Maybe you could a try a custom rom or to convert to the international version (7.19.401.2) but will require s-off.
alray said:
Strange first time i see this. Are you sure your phone is sim-unlocked? Might be related to the TMO version installed on the phone. Maybe you could a try a custom rom or to convert to the international version (7.19.401.2) but will require s-off.
Click to expand...
Click to collapse
The phone is def sim unlocked because i unlocked it before i updated. I was hoping to stay stock.....
I got to work now the apns magically save and are available now.....
yungvilleprod said:
I got to work now the apns magically save and are available now.....
Click to expand...
Click to collapse
How did you resolve this issue? Experiencing the same thing (Greyed out Edit APN option) and would like to know how to fix it

Imei unknow

Hello guys,
Please help me
My htc have no imei and no baseband after upgrade lollipop
this information have to fastboot
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.17.1540.35
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA34*********
(bootloader) imei: 3512***********
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3803mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-9df5faa7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.097s
Thanks for your help
Jabir31 said:
Hello guys,
Please help me
My htc have no imei and no baseband after upgrade lollipop
this information have to fastboot
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.17.1540.35
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA34*********
(bootloader) imei: 3512***********
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3803mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-9df5faa7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.097s
Thanks for your help
Click to expand...
Click to collapse
Try to flash the Dev edition RUU and see if the imei comes back, if not, it might be an hardware problem. The RUU is avaialble in the general section either in the RUU collection thread or Dev edition collection thread (links in my signature). You can also found it on htc usa support website
alray said:
Try to flash the Dev edition RUU and see if the imei comes back, if not, it might be an hardware problem. The RUU is avaialble in the general section either in the RUU collection thread or Dev edition collection thread (links in my signature). You can also found it on htc usa support website
Click to expand...
Click to collapse
I have flashed RUU file but not imei comes back

M8 Sprint Radio Problem

Hello to you guys. please i'm facing this problem of no baseband and imei on my phone, yes i know this won't be the first time on this forum, but i think my situation is kinda different. So i bought this m8 from a guy and at first look, i tought the phone was international not knowing it is sprint version, i downloaded an international firmware but i got model id error. Then i did the getvar all and noticed it was the sprint version. i downloaded the sprint version ( 6..20.....) and flashed it via the sd card method, when i rebooted the phone i got no signal, then i know something was wrong, i downloaded and flashed several other sprint firmwares and stock ruu too, still nothing. The phone was running skydragon v4 when i bought it and it was able to detect the sim then. the problem started when i flashed the first firmware successfully. Also the phone came with a radio version of 1.00.20.0120 and hboot 3.18 before i flashed the firmware. here is my phone info now:
C:\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.25.651.18
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT46TSF00345
(bootloader) imei: 99000*******
(bootloader) imei2: Not Support
(bootloader) meid: 9900**********
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000*********************
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0f94b3b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
please i will appreciate any help thank you

Categories

Resources