This began with a stock HTC one from Sprint
I updated all drivers and began with installing Cwm, rooting the device and then installing the latest Cyanogenmod
Everything was fine but then I wanted to make the device work with T-Mobile
So I embarked on doing so, proceeding I turned S-ON to S-OFF obtained super CID changed my MID to T-Mobile's MID relocked the bootloader installed T-Mobile's RUU and then everything went downhill.
After clearing the cache and rebooting the device it began to boot-loop and after that I tried using Cwm to install cyanogenmod through sideloading but adb did not recognize the device
After reading a few forums I thought the best course of action was to relock the bootloader and try installing T-Mobiles RUU once again
And... It failed, it began boot looping again and now im stuck with a cycling device.
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA*******
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4323mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.095s
My intention is to get this Sprint HTC one to work T-Mobile on either stock ROM but preferably Cyanogenmod.
Thanks, First forum post ever.
Hello There,
I have AT&T m7 and recently just S-OFF
I upgraded from 4.4.2 to the 7.15.401.1 firmware in order to flash the GPE 5.1 rom
But now it looks like I flashed the wrong radio or baseband because my cellular data is no longer working (althought I can still make calls)
Here is the output before I began:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3875mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
ANd here is the output afterwards:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: 4T.33.3218.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.15.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3833mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Please help me, I dont know what I did wrong.
fc3211 said:
Hello There,
I have AT&T m7 and recently just S-OFF
I upgraded from 4.4.2 to the 7.15.401.1 firmware in order to flash the GPE 5.1 rom
But now it looks like I flashed the wrong radio or baseband because my cellular data is no longer working (althought I can still make calls)
Here is the output before I began:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3875mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
ANd here is the output afterwards:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: 4T.33.3218.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.15.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3833mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Please help me, I dont know what I did wrong.
Click to expand...
Click to collapse
You flash stock RUU.exe
Sent from my HTC One using XDA Free mobile app
I did not flash the RUU, I had flashed the firmware 7.15.401.1 from https://docs.google.com/spreadsheets/d/1LQDLpVZYyUpXPgC2sh1BvAS9Oo8B-fTiZU_JhpIH-fU/pubhtml#
And I am thinking that I overwrote the radio with a version that is not proper for my phone.
But I dont really have alot of knowledge about this so please advise me.
fc3211 said:
I did not flash the RUU, I had flashed the firmware 7.15.401.1 from https://docs.google.com/spreadsheets/d/1LQDLpVZYyUpXPgC2sh1BvAS9Oo8B-fTiZU_JhpIH-fU/pubhtml#
And I am thinking that I overwrote the radio with a version that is not proper for my phone.
But I dont really have alot of knowledge about this so please advise me.
Click to expand...
Click to collapse
it wont effect your phone in that way, if you have signal, then go into your apn settings and reset them to defaults, you will then be taken to the first start up page again and have to select your operator again from the list of available operators, like you did when you first got the phone or when you install a new rom.
remove you IMEI and Serial number from your first post, its not good to post them, they guy who quoted you will also need to do the same.
Seanie280672 said:
it wont effect your phone in that way, if you have signal, then go into your apn settings and reset them to defaults, you will then be taken to the first start up page again and have to select your operator again from the list of available operators, like you did when you first got the phone or when you install a new rom.
remove you IMEI and Serial number from your first post, its not good to post them, they guy who quoted you will also need to do the same.
Click to expand...
Click to collapse
Are you certain about this? The fastboot output indicates that the baseband has changed since I flashed the new firmware
fc3211 said:
Are you certain about this? The fastboot output indicates that the baseband has changed since I flashed the new firmware
Click to expand...
Click to collapse
just try it, its not going to hurt, just goto settings - mobile data - access point names - (3dot menu in the top right corner) select that and then select reset defaults.
Of course the baseband has changed, the newer firmware had a newer radio file in it, its not a radio file like your thinking though, its more of a software controller for a piece of hardw2are in your phone, just like every piece of hardware on your computer needs a driver, so does your phone.
The 401 firmware you flashed is basically WWE (World Wide English), if it had messed up you'd probably be hard bricked.
Seanie280672 said:
just try it, its not going to hurt, just goto settings - mobile data - access point names - (3dot menu in the top right corner) select that and then select reset defaults.
Of course the baseband has changed, the newer firmware had a newer radio file in it, its not a radio file like your thinking though, its more of a software controller for a piece of hardw2are in your phone, just like every piece of hardware on your computer needs a driver, so does your phone.
The 401 firmware you flashed is basically WWE (World Wide English), if it had messed up you'd probably be hard bricked.
Click to expand...
Click to collapse
THanks, for explaining that to me
I just tried the same sim card in my galaxy s3 mini (unlocked) and it doesnt work in that phone at all (no calls or data). I think the sim may be defective, will get a new one and try again.
Thanks for your help
Edit: I did as you said in the m7 and even did a factory reset to make sure and results where the same. Looks like I got a bad sim card
@ Seanie280672: Thanks for your help bro
It just started working again after I installed ViperRom 7
Strange thing, just started working out of the blue but I am happy that is is resolved
fc3211 said:
THanks, for explaining that to me
I just tried the same sim card in my galaxy s3 mini (unlocked) and it doesnt work in that phone at all (no calls or data). I think the sim may be defective, will get a new one and try again.
Thanks for your help
Edit: I did as you said in the m7 and even did a factory reset to make sure and results where the same. Looks like I got a bad sim card
Click to expand...
Click to collapse
First of all I would like to explain myself for starting another topic with this title but my problem is pretty specific and I searched the web for this and haven't found a solution yet.
So this is how it goes. I have stock telstra rom on my device and seeing as telstra isn't so keen on updating it I converted my cid and mid to europe international (HTC__001), OS- *.**.401.11, flashed firmware and changed my build.prop to match. Once I did that I got a notification of an OTA for lollipop but once it starts, in recovery it says "/system/app/DocumentsUI.apk has unexpected contents" and red triangle with exclamation point shows so the installation is aborted. My question is how do I get OTA to work on my phone without losing all the data on it? Phone is s-off, rooted and unlocked but other then that I didn't change a thing, specially not that apk.
D:\OTA M7>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *
(bootloader) imei: *
(bootloader) meid: *
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3809mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.060s
Click to expand...
Click to collapse
Edit: flashed stock odexed 6.09.401.12 rom and firmware and it's all good, updating right now.
-. typewrited .-
I got a imported one m7 yesterday in India. i bought it from ebay India. Its rooted with ressurection remix ROM loaded. The ROM is good.
My problem is the phone cannot detect network signal in my office room. But out of my office, it is able to detect signals. Other phones don't have this problem.
It means the problem is related to radio or baseband.
How do I know which version of M7 is this. And which radio/baseband file can be flashed on this.
From the box it seems to be from Germany as specifications are written in German.
Kindly let me know.
Some information:
RADIO version 1.02.20.0922 and
HBOOT version tl 1.61.0000
Seems sprint m7 to me.
Can I flash T-Mobile or at&t modems?
Or any specific Indian baseband from Indian ruu.
lekhwani said:
Some information:
RADIO version 1.02.20.0922 and
HBOOT version tl 1.61.0000
Seems sprint m7 to me.
Can I flash T-Mobile or at&t modems?
Or any specific Indian baseband from Indian ruu.
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" (remove your imei and serialno).
alray said:
Post the output of "fastboot getvar all" (remove your imei and serialno).
Click to expand...
Click to collapse
Will do tomorrow as its.
Thanks
Hey! I got the following info.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 1.02.20.0922
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
lekhwani said:
Will do tomorrow as its.
Thanks
Click to expand...
Click to collapse
I got the following info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 1.02.20.0922
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
lekhwani said:
I got the following info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 1.02.20.0922
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
Its a sprint/cdma phone. Not the best variant when using a gsm network...
alray said:
Its a sprint/cdma phone. Not the best variant when using a gsm network...
Click to expand...
Click to collapse
By this I understand that t mobile and at&t baseband cannot be flashed onto this?
And, if above is right, can I flash some other sprint baseband (older/newer)?
And, will CDMA sim work in India?
Can someone tell me how I can install a lollipop ROM on this resurrection remix (marshmallow)
I want to try lollipop as I read somewhere about LTE single bar to multibar signal after changing some entry of SKU id etc in default.XML file.
I can't find that file in marshmallow.
lekhwani said:
Can someone tell me how I can install a lollipop ROM on this resurrection remix (marshmallow)
I want to try lollipop as I read somewhere about LTE single bar to multibar signal after changing some entry of SKU id etc in default.XML file.
I can't find that file in marshmallow.
Click to expand...
Click to collapse
Sprint phone will only get LTE if connected to Sprint (not the same LTE band as the gsm variant).
The only roms that can be flashed on this phone are Sprint compatible custom roms (see sprint htc one forum), these roms made specifically for that variant and most likely don't need any sku id modification to "improve" your signal
Custom roms can be flashed using TWRP recovery. MAke sure to flash Sprint custom roms and to use Sprint TWRP.
Hi I recently Bought a HTC One M7 and i wanted to extend its battery Life. I was looking for a way to do it and i found this Custom ROM called Android revolution HD 93.0..In order to flash that ROM i Unlocked the bootloader of my Device and installed TWRP recovery.Then i Successfully Rooted my HTC One using SuperSu.
Then i installed the Custom ROM.After restarting the device It never loaded in to the Operating system.Each time i restart the device it just boot in to the Recovery mod..Then I tried to flash the Stock ROM for my device But I was unable to do it..Please Help me with this problem..
This is what written on the back of my phone.
Model- PNO7100 .............. FCC ID- NM8PNO7100 801n
But when i type "fastboot getvar all" in the cmd this is what i get,
C:\Users\MChamoth97\Desktop\HTC\Unlock\OneDrivers_Fastboot\Fastboot>fastboot devices
FA34AS907199 fastboot
C:\Users\MChamoth97\Desktop\HTC\Unlock\OneDrivers_Fastboot\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.05.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA34AS907199
(bootloader) imei: 35585*****41335
(bootloader) meid: 990******63029
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4002mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.063s
HELP ME !!!