i updated my mi5 from miui7 to miui8 ,got stuck on boot screen ,and my bootloader is unlocked ,
PLEASE HELP HOW TO FIX IT.
use this method to flash MIUI 8 Global version
skip the miflash tool,... extract everything using 7zip,... move files to root directory example C:\miui8
connect phone into fastboot mode and run flash_all.bat
First boot takes a lot of time...
not working for me as my PC doesn't recognize the Mi5. What drivers have you installed - so that i can load them and hopefully unbrick my Mi5.
Txs
Related
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
try booting recovery from fastboot "fastboot boot *twrp image*.img"
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install..........
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Well i am not at all an expert in miui, infact this is my first mi phone. But i think this tool called xiaomi adb/fastboot tool can help u. Google it.... It is available in reddit. One piece of general advice : before any kind of experiment always keep a preparation for the worst case scenario. I think ur phone is stuck at boot. U can try to hold the power button for about 10-15 seconds to turn off. Also just relax and have patience... It will b solved. Let me know how it goes.
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Nevermind I misread... If you think clarity or the firmware messed up your phone I could give you my kernel and firmware for you to restore it
Though if you're desperate for a solution, I'd transfer a ROM into your phone and start over with it, you can flash MIUI also by flashing https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view after it
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Ok I solved the problem using this method.
So I removed back cover, disconnected battery, connected the 2 points with a twizzer then flashed STOCK rom and it worked!! So relieved!
Thank you for the help anyway.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
chandan shah said:
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Click to expand...
Click to collapse
Problem solved.
I got revived my redmi 4 again from softbricked locked bootloader,
By trying an older rom
santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgzWith miflash-20220218 in edl mode .
Hi Guys,
yesterday I was able to unlock my Xiaomi Mi 9T Pro bootloader after waiting for 7 days. The unlock was successfull at first attempt, but now my issues begin and I couldnt find a thread where someone has similar isseues.
1. after unlocking the bootloader, I booted to fastboot mode and flashed twrp (from a greek xiaomi forum website ) after that I tried to boot into recovery. The attempt was unsuccessfull and I got the Mi-Logo Screen with the unlocked message at the bottom, after 60 sec the screen goes black and nothing happens, only fastboot mode is working.
2. flashed back to stock recovery -> the phone boots up successfully and is working.
3. Used the Miflash 2017.4.25.0 Tool to flash fastboot rom to have an untouched condition (clean all option).
4. tried to flash another twrp (from wzsx150), same behavior like in 1. explained. Flashing back stock recovery -> phone boots and is working.
5. again used Miflash to have an untouched condition, tried another twrp (By mauronofrio)
5. same behaviour like in 1. explained...
I actually got a Mi 8 Pro and it was so easy for me to flash twrp (also unoffical builds like now for the 9t pro). Switching to different intel laptops with win7 or win10 didnt solve the problem. Changing USB Type C cabels also didnt help
Can someone explain why I'm not getting things to work, as there are already other members which did it successfully...
Try this...
1. flash TWRP
2. Reboot directly from fastboot into TWRP with volume + and power button
3. Flash TWRP.img with TWRP
Problem solved
Kollachi, thanks for the suggestion but didnt work either.
I found a solution by myself I ordered the xiaomi from amazon DE and it was shipped with global stable, why not EEA? I always used the global stable fastboot rom to start from zero, like mentioned, without success.
The solution was flash eea fastboot rom -> twrp installation worked at first attempt and still works! Interesting that this helped me to solve this..
Hello guys, so, today i was trying to install miui 9 in my mi a2, then later going to update to miui 10. I was trying to install by flash mode (XiaoMiFlash) Everything was going fine, until my windows accidently turned off for updates (RIP). When my pc turned on, i was desperately opening miflash as fast that i could, but then when i try to install again it was saying "cannot recieve hello packet". I tried to restart it thinking that would fix it, but its just stuck in a MI logo with mi.com screen(Bootloop). I was trying to unplug usb cable and then putting again trying to fix it, clicking refresh to see if it appears, but it doesn't. Same with fastboot mode, doesn't get recognized. I really need help to fix it and sorry if i wrote something wrong, english is not my native language.
Same problem happened with me today. Any Solution?
Are you able to boot into fastboot?
Something similar happened to me once with the A2.
I somehow too managed to interrupt some update process and got stuck in the same scenario.
I could resolve it by getting one of these now superseded fastboot stock files with some installer scripts in them.
The scripts also wouldn't work, but I could install the firmware files one by one manually, following the script's content.
First off though, you could try to get into fastboot mode (as mentioned before), boot the official twrp img and flash the latest firmware zip file from here
Then you could go ahead and flash miui for the A2 like any other custom ROM (or did you just post in the wrong section and actually got an 6X? - seeing that you used miflash, it really seems like it..
Just in case here is the right thread for downloading miui for the A2: A2 miui port)
Yaroray said:
Are you able to boot into fastboot?
Click to expand...
Click to collapse
Hey, sorry for not awnsering for a long time. Yes, i can enter in fastboot, but the problem is that my MI A2 doesn't get recognized. (nothing happens if i try to flash it in fastboot mode).
i same that trouble, i can try to bootloader but when i connect usb to my pc it not recognized, i don't run anycommand from my PC,
I think if i change to second slot i will boot my phone, and i want to change slot without command "fastboot set active-slot "
Hi everyone!
I need help, please.
Xiaomi Redmi 4A - 2/16 Gb. Boot unlocked.
Problem after flashing miui 11 with error:
1. TWRP - don`t aviable now and I can`t flash it;
2. Fastboot - I can enter in Fastboot mode, but smartphone not detected by computer (win 7/64) and notebook (win 10/32). all drivers - ADB, Quallcom - installed correctly;
3. I try to enter EDL mode - with two test points on a motherboard. I tried to connect them - without effect - my PC and Notebook can`t detect device...
What can I do ?
Try my suggestions
If you have another smartphone please download apk
https://play.google.com/store/apps/details?id=eu.sisik.hackendebug
Bring your bricked phone to fastboot mode. Using bugjaeger apk you can flash and anyhow you told that bootloader is unlocked if your bootloader is locked then whole procedure will not work
I am providing YouTube link try it
https://youtu.be/G_E8ImOoQZM
Video is about 7:54 Watch the video 4:00 carefully
Dont Flash any custom ROM or recovery
flash all files which is in stock ROM only (zip or rar or tgz)
and don't lock bootloader.
After flashing try to restart phone
If the procedure didn't work
Sorry for wasting your time.
iam using RM3 recently i shifted from global rom to chinese because it is andriod 11.and rm v3 so i used it for few days but i need google services so i thought about rooting .I installed all required files .the problem begins here when i connected it to my pc it didnt detect anything....i heard new cn version doesnt have mtp or usb connection so i used unbrick tool(eu) for stock rom ..now it got stuck in currpted.i need some help ...i tried different ways...under adb devices the device is not showing so i cant do manually.one more thing when i use unbrick tool(eu) it show firehose file downloaded ....but in unbrick tool(non-eu) it says cannot download firehose file.
.
.
Help me someone!
You give problem because your'Mg3 not yet uninstall root complete, so Android system prevent it booting.
=> Solution:
- Step 1: re-unbrick your phone with unbrick tool (eu).
- Step 2: reboot to bootloader.
- Step 3: fastboot oem nubia_unlock NUBIA_NX629J
- Step 4: use volumn up or down to choose line with content "unlock bootloader". Then wait for your phone working. => Done
≠==========================≠
|Source: sSjBlue197 (vietnamese).|
|Contact: fb.com/ssjblue197. |
≠==========================≠
Nanilucky11 said:
iam using RM3 recently i shifted from global rom to chinese because it is andriod 11.and rm v3 so i used it for few days but i need google services so i thought about rooting .I installed all required files .the problem begins here when i connected it to my pc it didnt detect anything....i heard new cn version doesnt have mtp or usb connection so i used unbrick tool(eu) for stock rom ..now it got stuck in currpted.i need some help ...i tried different ways...under adb devices the device is not showing so i cant do manually.one more thing when i use unbrick tool(eu) it show firehose file downloaded ....but in unbrick tool(non-eu) it says cannot download firehose file.
.
.
Help me someone!
Click to expand...
Click to collapse
Enter bootloader POWER BUTTON+VOLUME DOWN
Use PC enter adb command :
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flashing unlock
Then, reboot device
enter command
"fastboot reboot"