I'm currently using CMremix based on CM13, but dev has halted on that while the dev (zion959) works on bringing up CM14. While CMremix is mostly stable, my concern is tracking the MM security updates merged into the CM13 source from AOSP. The CM13 dev says the CM13 sources are ready to go, but depend on the DOK2 boot loader and modem which precludes official builds, and he's too busy to get that going. I have my CM13 build environment setup and build CM13 roms, but they do not boot. I'm hoping someone here has gotten CM13 to build for trltetmo and would be willing to share their experience with me. thanks.
Related
Hello to all devs! I am asking this because i see that cm 11 developing is more and more growing. I couldn't keep up with the dev of cm11 unofficial for personal reasons, so i am asking if someone could give me a heads up. I remember that oficial cyanogen rom kept the old blobs and our devs, were using new blobs. But after that there is only chaos... Could someone please tell me what is the point we are now?? What works to what rom, and what is buggy? I do not want to know what rom is better or personal opinions. Just the facts. Thank you!!!
Sent from my LG-P880 using Tapatalk
its simple all unofficial roms using p880-dev sources (unofficial) and all official releases are based on "official" CM11 sources
unofficial ones are based on grouper blobs but there was a problem with camera so @Adam77Root made a little hack to get it work. So now camera is working ( little bit buggy) video rec is not working till Adam end his hack, but screenrecording is working here and not on official. overall IMO grouper blobs seems to give a smoothier experience than official ones, and they can give us hope to bring future releases of android on our p880.
there was also many many other thingsXD
I wanted to know if we are still Dependant on unified builds of CM or could we use the new CM 12.1 night lies..??
Because it says that its been de unified again for CM12 builds..
Any work around to avoid jbbl boot loader..
Help would be appreciated..
Forget about unified builds.. We not have a separate device tree for us and these builds are specific for our device. And yes, we are still on jb bootloader.. That shouldn't concern you.. It's not a big issue
Sent from my ATRIX HD using XDA Free mobile app
Thank you for responding...
volcano619 said:
I wanted to know if we are still Dependant on unified builds of CM or could we use the new CM 12.1 night lies..??
Because it says that its been de unified again for CM12 builds..
Any work around to avoid jbbl boot loader..
Help would be appreciated..
Click to expand...
Click to collapse
I have clean flashed and dirty flashed de-unified CM 12.1 nightlies to my AHD with good results. If you haven't tried it yet, expect long first boot. Default install may lose root, but you probably know that root selection is in Developer options in Lollipop.
Can anyone upload the AOSP device tree for sprout to compile AOSP based ROM?
I'd like to build a proper Chroma ROM (the one currently built doesn't have supersu built in, no bootanimation, etc)
I cannot seem to build with CM's device tree, I've been messing with it all around to no avail
Thanks.
KcLKcL said:
Can anyone upload the AOSP device tree for sprout to compile AOSP based ROM?
I'd like to build a proper Chroma ROM (the one currently built doesn't have supersu built in, no bootanimation, etc)
I cannot seem to build with CM's device tree, I've been messing with it all around to no avail
Thanks.
Click to expand...
Click to collapse
https://www.reddit.com/r/androiddev...for_a_nonnexus/?_e_pi_=7,PAGE_ID10,8849235716
I hope this discussion help you have a look at it. And this too http://stackoverflow.com/questions/29077612/build-aosp-rom-with-cyanogenmod-device-files
Thanks, I finally figured out everything, AOSP doesn't do inline kernel building like CM so I need to make sure Android.mk exists on the kernel folder. That exactly what my problem is.
Happy to help...i hope we see numbsr of quality aosp builds from you.Aosp roms on this device has been a bit buggy uptill now.Best luck buddy.
Hi Xda Developers
i found unofficial build of Resurrection Remix 5.6.4 marshmallow but can't post official thread cause i haven't tried or test it or have any changelog or source , bla bla
due to my phone in sony supporting center i can't test it but if any one want to test it and report if camera work and if there some bugs
i'm sorry if put it in wrong section but this for discussing
Download
Sorry again
note: another build found now but aicp u can found it on android file host by search for Honami
http://forum.xda-developers.com/xpe...-resurrection-remix-lollipop-t2996238/page116
Yes, I found AICP, CM 13, Vanir MM and that RR MM, more Marshmallow roms are coming
with some fixes on SELinux may be data work but
the real problem in camera blobs
some builds of AOKP fixed it but it's laggy i hope the next builds will be more stable but
i want to ask .... is AOKP ready for daily use or for dev only now
@DectonX Aokp is just missing camera. So if you never use your camera, so you can flash this ROM I think it can be used as daily ROM. And trying and reporting bugs are free. So you can try and see
@benplay i hear that some devs send on github that fixed it but it laggy
as you i installed crDroid but i faced battery problems (high Drain)
so i wait for aokp to be very stable, i don't care the camera at this time
Unofficial Temasek cm13 and cm12.1.
This is NOT the official maintainer thread for temaseks unofficial cm. This is an unofficial port.
The cm-13.0 port has been passed over to Bauita for the time being. As he has a little more time and he has the device. if you need to you can contact me (trader418) either through PM or twitter @trader418dev
Trader418 will still maintain CM-12.1 port.
Supported devices: ks01lte
Credits:
This is @temasek 's rom that bauita/trader418 has built for this device with @kyasu 's kernel.
Downloads:
CM-13.0 - https://www.androidfilehost.com/?w=files&flid=60245
CM-12.1 - https://drive.google.com/folderview?id=0B_xUvmlw0WlSeHk1YmltS0VoVGc&usp=sharing
Changelog:
CM-13.0 - Here
CM-12.1 - I supply the up to date changlog in the GDrive share.
XDA:DevDB Information
Unofficial Temasek Builds cm13/12.1, ROM for the Samsung Galaxy S 4
Contributors
trader418, Temasek made this possible.
Source Code: https://github.com/temasek
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: Temasek Unofficial cm 13/12.1
Version Information
Status: Testing
Created 2016-03-20
Last Updated 2016-06-25
About to upload a test build for cm-12.1 and cm-13.0 will post back here when uploaded
edit: cm12.1 test build uploaded here https://drive.google.com/folderview?id=0B_xUvmlw0WlSeHk1YmltS0VoVGc&usp=sharing
cm13.0 build failed. Not sure whats up with that. I will take a look over the next few days and see if I can get it building again.
What I want to know for the cm12.1 test build:
1. Obviously does it boot
2. if you flash arters kernel with the test build does it bootloop?
amazing thanks, it boots and work perfectly with arter kernel 9
bauita said:
Amazing thanks it boots with arter kernel 9
Click to expand...
Click to collapse
Great, glad to hear it.
with philz/arter recovery i can´t install the rom, error 7 = this rom ist for ks01lte you device ist ks01ltesk
with twrp no problems
will be uploading another cm-12.1 test build later on tonight. cm13 is delayed because of build errors.
Here Temasek successfully booted and kernel v19 arter97
new test 12.1 build uploaded here: https://drive.google.com/folderview?id=0B_xUvmlw0WlSeHk1YmltS0VoVGc&usp=sharing
I need to know if this build boots and if it supports arters kernel. Thank you to everyone testing these builds, you're helping hugely. if this build boots and you guys can flash arters kernel and it boot still then this should be the start of a more stable release and it should be easier for me to build updates for you.
deleted
Bug report
First of all, I wants to change my network mode to WCDMA Only for WCDMA Preferred...
There's several choice which I can use at preferred network
situaiton : When I change network type to 3G at setting it does not apply at all. So I tried to change preferred network mode at ##4636##....
But I only can use GSM only, LTE only, and LTE/GSM auto (PRL)...Default is LTE/GSM auto(PRL)
Whenever I change it to something else I come backs to LTE/GSM auto (PRL) and cellinfo always remains at CellinfoLte..It should change to CellinfoWCDMA when I change to WCDMA only but I never changes
P.S.1. I have tried everything I could do...I have done such as build.prop edit, change APN,,etc..BUT NOTHING HELPED...So I found out it was problem of CM13.
P.S.2 : At cm12.1, everything works fine
hello, tested the test and remains in the logo of cyano and arter97 kernel or boot logo
---------- Post added at 10:41 AM ---------- Previous post was at 10:37 AM ----------
the logo does not rise
Okay I think I have sorted the problem with booting once and for all on cm-12.1 builds, will build and upload another test build later today.
Cm-13???
nick more said:
Cm-13???
Click to expand...
Click to collapse
Still working on it
God luck
bauita said:
the new test build doesn´t boot stuck again at the samsung logo same v19 from 18.03.2016
Click to expand...
Click to collapse
Should be fixed in next release.
Going to upload a cm 12.1 build that should boot with the kernel that comes with it and arters if you flash it in about 30 mins
trader418 said:
Going to upload a cm 12.1 build that should boot with the kernel that comes with it and arters if you flash it in about 30 mins
Click to expand...
Click to collapse
Is there some chnages to the first test build (functioning with arter kernel) ?
bauita said:
Is there some chnages to the first test build (functioning with arter kernel) ?
Click to expand...
Click to collapse
Yes, the cm 12.1 rom is now being built with @kyasu 's kernel. he has given me permission and I will be giving him credit in the OP.