Hello everyone.
I was running CM12.1 on my Moto X 1053 and decided to try SlimKat for a change, I was successful in clean flashing it after backing everything up. But when I booted into it, the Wi-Fi wouldn't turn on . I have tried several times but the turn on/off toggle is greyed out.
I have restored my backup and Wi-Fi is working just fine. Can anyone tell me what I am doing wrong
Sorry for noob question
Related
Hi I've been trying to find out the problem for past 2 hours and flashed again many times and i cant seem to find the problem here.
the problem is that after a clean install of this rom AOKP milestone #5, i connect to my wifi 2.4GHz. 5GHz doenst seems to work.
it doesnt even show. now the problem is that when i reboot once than the tab cant turn the wifi back on.. so i cannot connect to the wifi.
i get black toggle not gray like the other toggle and i go into the setting menu and the tab tries to turn on the wifi but i can't.
it just says "turning wifi on" and nothing. so i flashed again and same problem occur. i dont know the problem.
so i am trying to restore the overcome 4.1 nandroid backup but it doenst work from the new CWR (MTD).
how can i flash the recovery (non MTD) that i used to have with overcome rom.
if i cant do i have to restock all the way again so i can restore to overcome nandroid backup that ive made?
if i have to restock, what do i have to do from AOKP Milestone #5 ROM (MTD)?
Thanks in Advance
Dan
You restock the same way as in overcome.
Fire up Odin and flash with repartition.
Then you can flash overcome kernel and boot to cwm recovery and restore.
Don't know about you, but my overcome Android restore always have FC after reboot to the point of unusable.
I usually have to wipe all and restore from titanium backup instead.
Sent from my GT-P1000 using XDA
i'm loving the aokp rom i just wish i can reboot...
i'm loving the aokp rom i just wish i can reboot...
when i reboot i loose WIFI
it stops working
i am loving the aokp
i guess im too used to my galaxy nexus
i love ics
why do you think i am losing WFI guys????
PLEASE HELP!!!
Never quite seen such in aokp.
Do you have MAC address filtering in your wifi router ?
With aokp the Mac changed but I thought only once, not every reboot.
Sent from my GT-P1000 using XDA
I read this on a thread.
Guy had mobile data switched on, and whenever he rebooted, wifi wouldn't connect.
Guy switched mobile data off, rebooted, wifi started working, then turned on data.
Try and let us know.
obahmood said:
I read this on a thread.
Guy had mobile data switched on, and whenever he rebooted, wifi wouldn't connect.
Guy switched mobile data off, rebooted, wifi started working, then turned on data.
Try and let us know.
Click to expand...
Click to collapse
Sorry for reviving this thread, but your comment has helped me out. I have AOKP M1 on my i605 and wifi has been a pain. Turning mobile data off, wifi on, and mobile data back on solves the problem. Thank you!
So I have an issue where I try to toggle on my Wi-fi and it stays stuck on "Wifi turning on." I've done a few factory resets and it seems to fix it for about a day but it just breaks right after that. When I select the option in the quick settings bar, the icon appears as a faded grey-ed out color and stays that way for a long time and can't find any networks.
A little bg info: I bricked my phone with safestrap while accidently writing over the default boot slot and then resurrected it with an sm-n900a 4.4.2 rom and the latest version of Odin. Everything works fine except for the wi-fi. Worked fine for about 3 days and then broke. I've tried resetting and not enabling auto-configure for wifi and also I've disabled the auto network switch option. I am out of ideas.
Try reflashing the stock firmware using the 4 Odin files here. http://forum.xda-developers.com/showthread.php?t=2838117
This will erase internal memory and give you a complete refreshed 4.4 stock rom. You can then root, safestrap, etc....
If you have Wi-Fi trouble after flashing the stock files you may have hardware issues.
I see my problem. The files I was using before were of an earlier version. Without knowing exactly how to search for the 4.4 Odin files, I couldn't fix it. Hopefully this fixes it. Thank you very much for pointing me in the right direction!
Hi all,
I recently flashed the cm-11-20140913-SNAPSHOT-jcsullins-tenderloin on my HP TP first time after WEBOS and love to have android on my TP. Although it was working perfectly regarding all aspects, but two days back wifi stops working suddenly and it doesn't turn on. When i slide the bar of wifi from OFF - ON it didn't move and the screen says WIFI TURNING ON and remains. After that i completely wiped all the data and flashed another version of CM11, it did work for some minutes and again the same problem with wifi. I then tried (After Wipping again) the old CM10.1 version with supported files but again it doesn't on from the start. One thing i want to mention that when i change the CM11 version it stops working after couple of minutes and then i shut down and check in the morning it was again working and then again stop after rebooting. I also tried to control it from WIFI Apps i.e. wifi control, wifi manager when it works for some minutes but the apps also failed to TURN ON THE WIFI when it fails from the system.
I also try to search this topic but i didnt find any which worked for me.
Any help regarding this issue would be highly appreciated.
Regards
No any Response:S
First of all, how did you "flash" the ROM? Are you using tptoolbox?
Also, there are several newer versions of jcsullins ROM available to install.
What gapps did you use?
Please provide more information on your part so folks are able to help you.
Get the newest Jcsullins CM11 build
hsroomi said:
Hi all,
I recently flashed the cm-11-20140913-SNAPSHOT-jcsullins-tenderloin on my HP TP first time after WEBOS and love to have android on my TP. Although it was working perfectly regarding all aspects, but two days back wifi stops working suddenly and it doesn't turn on. When i slide the bar of wifi from OFF - ON it didn't move and the screen says WIFI TURNING ON and remains. After that i completely wiped all the data and flashed another version of CM11, it did work for some minutes and again the same problem with wifi. I then tried (After Wipping again) the old CM10.1 version with supported files but again it doesn't on from the start. One thing i want to mention that when i change the CM11 version it stops working after couple of minutes and then i shut down and check in the morning it was again working and then again stop after rebooting. I also tried to control it from WIFI Apps i.e. wifi control, wifi manager when it works for some minutes but the apps also failed to TURN ON THE WIFI when it fails from the system.
I also try to search this topic but i didnt find any which worked for me.
Any help regarding this issue would be highly appreciated.
Regards
Click to expand...
Click to collapse
gtallmadge said:
First of all, how did you "flash" the ROM? Are you using tptoolbox?
Also, there are several newer versions of jcsullins ROM available to install.
What gapps did you use?
Please provide more information on your part so folks are able to help you.
Click to expand...
Click to collapse
Yep thats right, the more info the better when reporting problems and make sure you've got the most up to date rom. Full guides can be found in my signature below.
Get the most updated Jcsullins Rom here cm-11-20150113-SNAPSHOT-jcsullins-tenderloin
I have this same issue, wifi works fine on lollipop, but not on cm11, i originally used tp toolbox to remove webos, resize partitions and flash lollipop. I tried going to cm11 for full functionality and wifi would not work, i tried 3 different cm11 based roms and none worked, i went back to lollipop and wifi worked right away.
Hello Guys,
I have been facing a serious problem ever since I updated my Mi3 to latest developer version. My 3g internet isn't working. I have tried all the possible trouble shooting like reinstalling the OS both stable and developer, clearing cache lot of times, reinserted the sim couple of times. I even tried to flash a lower version but it didn't help.
Initially i was on custom LP with extended partition on TWRP recovery and everything was working flawlessly. I reverted back to stock partition and now using CWM recovery with miui 6 developer version.
On the other hand the wifi works perfectly no issues with it. Not sure whether its a bug or i am missing something.
I would highly appreciate if a solution can be found and i can start using my internet data.
Thanks
Hello Guys,
I have a weird issue with my friends Moto G ( XT1033 ) Falcon. I flashed a stock rom. Upgraded to 5.0.1. Installed custom recovery + Root. Everything working fine as it should be except wifi. As i try to switch On the wifi toggle. it gets disabled by itself in 2 -3 seconds. The reason i flashed new ROM in first place is because of this issue. What might be the problem here and how can this be fixed ?
Thanks.
C