Database Develop

Downgrade OxygenOS from 3.5.2 to 3.2.6 with Root / Xposed / Debloat

So I downgraded my Oneplus 3 from 3.5.2 to 3.2.6 and this was kind of a painful process, so I decided to share my experience with you.
If you follow this guide you will successfully downgrade from the latest Community Build to the newly released stable.
Note: Just because this worked for me, doesn't mean that it will work for you! Use this guide on your own risk and always use backups!
You'll need:
- Oneplus with OOS 3.5.2 and modified TWRP
- OxygenOS 3.2.6 Full ROM
- Latest official TWRP
- AndroidSDKSlim (needs Oneplus 3 USB drivers installed)
- SuperSU 2.78 SR1
- Xposed Framework (optional)
- Debloat Script (optional)
Downgrade:
Before you start, please create a COMPLETE backup of all your data.
You will factory reset your phone during the process.
1. Copy OOS 3.2.6 Full ROM, SuperSU, Xposed, Debloat Script to your Oneplus
2. Flash modified TWRP if you haven't already
3. Boot into modified TWRP
4. Select Wipe -> Advanced Wipe -> Select all but internal storage -> Swipe to Wipe
5. Install OOS 3.2.6 Full ROM
6. Reboot into system and use the installation wizard to setup your phone (do not setup fingerprints, or any device PIN)
7. Reboot into bootloader
8. Connect your phone to a PC/Notebook
9. Extract AndroidSDKSlim to your Desktop and copy twrp-3.0.2-1-oneplus3.img into \AndroidSDKSlim\android-sdk-windows\platform-tools
10. Run CMD with admin rights and navigate to \AndroidSDKSlim\android-sdk-windows\platform-tools
11. Run "fastboot flash recovery twrp-3.0.2-1-oneplus3.img" to revert to official TWRP recovery
12. Disconnect your phone and boot into recovery
13. Dirty flash OOS 3.2.6 again (this might sound stupid but it's mandatory)
14. Still in recovery, flash SuperSU, Xposed and Debloat Script
15. Wipe Dalvik & Cache
16. Reboot into system and setup your phone

Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?

darkbash said:
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
Click to expand...
Click to collapse
You're welcome.
Unfortunately, I can't provide guides for procedures I never went through.
But I asume that you could just flash any Custom ROM after you completely wiped your phone in step 4. So instead of flashing OOS 3.2.6 afterwards, just flash a custom ROM. Be sure that you have all zips you need on your internal storage and a backup to revert back to, if anything goes wrong. Otherwise you will have to use ADB sideload to install a ROM.

Ok, so I have a Modified TWRP installed already. Question is If I want to flash other ROMS after wiping system,dalvik/cache,data etc. Do I have to Flash official TWRP first followed by firmware,ROM, etc?
or firmware first then ROM and lastly official TWRP?
it's quite confusing.

I made a mistake and I installed the modified recovery installed the 3.5.2 rom and before booting I decided to restore my nand backup so I flashed the official twrp recovery and now I can't go to recovery anymore and the phone doesn't boot.
I imagine I have to sideload the modified twrp again but how do I do that? How do I reboot to bootloader ?
This is the only sign of life

gigeaky said:
I made a mistake and I installed the modified recovery installed the 3.5.2 rom and before booting I decided to restore my nand backup so I flashed the official twrp recovery and now I can't go to recovery anymore and the phone doesn't boot.
I imagine I have to sideload the modified twrp again but how do I do that? How do I reboot to bootloader ?
This is the only sign of life
Click to expand...
Click to collapse
Flash modified TWRP, and the recovery will return. then, follow the guide. it happened to me too.

darkbash said:
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
Click to expand...
Click to collapse
First flash modified TWRP than install official 3.2.4 than flash CM ROM or custom ROM

uniQ191 said:
So I downgraded my Oneplus 3 from 3.5.2 to 3.2.6 and this was kind of a painful process, so I decided to share my experience with you.
If you follow this guide you will successfully downgrade from the latest Community Build to the newly released stable.
Note: Just because this worked for me, doesn't mean that it will work for you! Use this guide on your own risk and always use backups!
You'll need:
- Oneplus with OOS 3.5.2 and modified TWRP
- OxygenOS 3.2.6 Full ROM
- Latest official TWRP
- AndroidSDKSlim (needs Oneplus 3 USB drivers installed)
- SuperSU 2.78 SR1
- Xposed Framework (optional)
- Debloat Script (optional)
Downgrade:
Before you start, please create a COMPLETE backup of all your data.
You will factory reset your phone during the process.
1. Copy OOS 3.2.6 Full ROM, SuperSU, Xposed, Debloat Script to your Oneplus
2. Flash modified TWRP if you haven't already
3. Boot into modified TWRP
4. Select Wipe -> Advanced Wipe -> Select all but internal storage -> Swipe to Wipe
5. Install OOS 3.2.6 Full ROM
6. Reboot into system and use the installation wizard to setup your phone (do not setup fingerprints, or any device PIN)
7. Reboot into bootloader
8. Connect your phone to a PC/Notebook
9. Extract AndroidSDKSlim to your Desktop and copy twrp-3.0.2-1-oneplus3.img into \AndroidSDKSlim\android-sdk-windows\platform-tools
10. Run CMD with admin rights and navigate to \AndroidSDKSlim\android-sdk-windows\platform-tools
11. Run "fastboot flash recovery twrp-3.0.2-1-oneplus3.img" to revert to official TWRP recovery
12. Disconnect your phone and boot into recovery
13. Dirty flash OOS 3.2.6 again (this might sound stupid but it's mandatory)
14. Still in recovery, flash SuperSU, Xposed and Debloat Script
15. Wipe Dalvik & Cache
16. Reboot into system and setup your phone
Click to expand...
Click to collapse
worked like magic. Thankyou for this education. it didnt work when i followed other folks. Much appreciated.

So it seems I have booted with 3.5.2 and modified recovery. Now my question is: can I reboot in recovery at step 7 and install the original twrp recovery? Or can I use flashify? As I don't have access to a pc

I did ok but cant use adaway do you have a fix for it?
Enviado do meu ONEPLUS A3003 através de Tapatalk

I'm trying to return to 3.2.6 after trying 3.5.2.
However, after flashing and booting 3.2.6, I boot into fastboot mode and the official TWRP refuses to flash. It reports that it's failed and then I'm left with no recovery until I reflash the modified TWRP.
I could try restoring my Nandroid backup of 3.2.6 with the modified TWRP, but I'd prefer to return to the official TWRP before doing this.
Any suggestions?
Edit: Fixed it. I downloaded the official TWRP again and it flashed. The first download must have been corrupted.

I followed a different method and successfully downgraded today to a former nandroid. I was rooted without xposed.
3.2.6 to 3.5.2 dirty flash
- installed modded twrp
- performed backup on 3.2.6
- installed modded 3.5.2 (the only that flashes in twrp)
- installed root SR1
- wiped caches only
- reboot
3.5.2 to 3.2.6 restore
- downloaded 3.2.6
- boot to modded twrp, wipe both caches, data, system
- flashed 3.2.6 stock and root SR1
- restored 3.2.6
- wiped caches
- reboot
- enjoying my LTE again
Without first installing stock, after a restore my phone was boot locking right after the oneplus white logo (capacitive buttons would light up, but it would not boot to red logo). Had to press vol down and power to force it to boot menu to select recovery and get back to twrp
Hope this helps someone, it's a bit easier than swapping twrps and no need to boot up/flash 3.2.x twice.

So if I am on the CB and want to go back to 3.2.6
I can flash 3.2.6 with the modded TWRP
Then flash Official TWRP and boot?

If I have official recovery, no root, and locked bootloader, can I downgrade from 3.5.3 to 3.2.6 without any problems, just by sideloading the zip in ADB? Thankss

popab said:
If I have official recovery, no root, and locked bootloader, can I downgrade from 3.5.3 to 3.2.6 without any problems, just by sideloading the zip in ADB? Thankss
Click to expand...
Click to collapse
i would also like to know this please

bigup7 said:
i would also like to know this please
Click to expand...
Click to collapse
I did it and it does work perfectly. Just make sure to wipe data from recovery after flashing.

I was on Comunity Build v.3.5.4. I want it back FreeDom v.1.6.
I did:
1. Flash Twrp-3.0.2-19-oneplus3.img.zip. Somebody sugested original twrp 3.0.2.1 from twrp site. For me did NOT work. Phone not booting in recovery with 3021.
2. Advanced wipe. Wipe dalvik cache/cache/system/data
3. Flash Freedom v.1.6. Clean Flash it's safer & better.
Done. System works. Recovery works.

null0seven said:
I was on Comunity Build v.3.5.4. I want it back FreeDom v.1.6.
I did:
1. Flash Twrp-3.0.2-19-oneplus3.img.zip. Somebody sugested original twrp 3.0.2.1 from twrp site. For me did NOT work. Phone not booting in recovery with 3021.
2. Advanced wipe. Wipe dalvik cache/cache/system/data
3. Flash Freedom v.1.6. Clean Flash it's safer & better.
Done. System works. Recovery works.
Click to expand...
Click to collapse
I am on CB Freddom os
I want to go back either to stock or to op3lite.
I cant reboot to recovery.
But adb works yet.
What to do plz suggest.
Sent from my ONEPLUS A3003 using Tapatalk

1. If system don't boot. Reboot to fastboot.
- Flash recovery.img. If PC don't see youre phone option 2.
2. If system boots, open phone like normal.
- Extract recovery img. Put it on the TWRP file on phone sd card.
- Download Flashify from play. Open it, flash img of recovery. Open recovery to chech if it works.
Try with both recovery (3.0.2.0 or modified 3.0.2.-19). One of those will work.

Im getting system partition has unexpected contents after OTA update after installing step 5 ????

[ROM] OxygenOS Open Beta 9 (Nougat) Update and Installation!!

Hi everyone,
We appreciate everyone’s feedback from the OxygenOS Open Beta 8. With your help, we have optimized and improved several key areas.
The changes include:
Added Expanded Screenshots
Shelf Design Optimizations
General UI Optimizations
DPI Optimizations
Battery Performance Optimizations
Stability and Performance Optimizations
General bug fixes
Please visit the download page here:
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_openbeta_9/
If you’ve already flashed a previous Open Beta build, you will receive this update via OTA. If you haven’t, you will need to flash this build by ADB sideload. Your data may transfer, but there is always a possibility of losing personal data, so be sure to backup all of your important data before flashing this build. As stated before, once you flash the Open Beta, you’ll continue getting Open Beta OTAs.
Please follow the link below for the UI/UX experience survey. We’d really appreciate a few minutes of your time, as it will help us make OxygenOS even better. One last thing: this is a limited program, so we may disable this download link once we receive enough feedback.
- Feedback on UI/UX: https://goo.gl/forms/hEqMPq9U9QNrxvhc2
Note: If you flash this Open Beta build, you’ll receive Open Beta OTAs (but not official OTAs). You’ll need to manually (clean) flash back to our official builds to continue receiving official OTAs. Rolling back to official OxygenOS versions require wiping data and cache.
Thank you for your patience and as always, we look forward to hearing your continued feedback in the bug reporting forum here: https://forums.oneplus.net/feedback/.
Thank you for helping us build a better OxygenOS.
Never settle.

Installation Methods
Before we start:This method is only for the OnePlus 3
Follow the steps correctly otherwise you may brick your device. I am not responsible for any damage to your device, please ensure that your device is at least 60% charged to prevent the accidental shutdown in-between the update process.
Downloads:
Beta 9 Full Zip Official Download
Compatible Stock Recovery
********************* For Stock Non Rooted Users with Stock Recovery *****************
1. Download the appropriate OTA/Full Zip from above link and place it in the root folder.
2. Navigate to Settings > System Updates > Settings Icon > Local Upgrade & Select the OTA File
3. Once selected system would prompt upgrade now
4. Select upgrade now and system would reboot in stock recovery and flash the OTA
5. The installer would itself flash the OTA and reboot the device.
The Device will reboot and your OnePlus 3 is now running on the latest OxygenOS firmware & OS.
PS: The first boot may take some time so keep calm and wait for it to boot.
* After flash is successful go back to recovery and a wipe of cache is recommended.
* If in any case flash is unsuccessful the system would prompt you to download the full 1.4GB zip. So download that and follow the same process as above.
************************ For Rooted Users with TWRP Recovery ************************
Download Beta 9 Full Zip
1. Download the Beta 9 Full Zip on your phone internal memory.
2. Download the Latest SuperSU SR5
4. Reboot To TWRP (Modified 28) & Take a Nandroid of your existing ROM
5. Go to Wipe > Advance Wipe > Select Dalvik & Cache & Swipe to Wipe
6. Install Menu > Select Beta 9 Rom Zip > Swipe to Flash
7. Wipe Dalvik & Cache
8. Flash SuperSU to maintain root
9. Reboot System and Enjoy the Beta 9 Update
* Do not flash Xposed as not compatible with 7.0 builds yet
If you come from a custom rom, i recommend a clean flash and make sure you use the modified TWRP 3.0.2-1.28 as the official one is incompatible with the CB firmware yet.
PS: The first boot may take some time so keep calm and wait for it to boot and the system would boot twice due to flash of supersu so keep calm
PS: Rooted users may either flash the full Beta 9 Zip or they need to flash the previous full zip beta 8 first to overwrite system partition followed by the relevant Beta 9 OTA zip for a successful flash else just the OTA flash would fail with error 7 in TWRP

I was on TWRP (modded) and rooted. Installed the update (OTA) and now my phone just reboots to TWRP no matter what I do (I have even made a factory reset and reinstalled Beta8)

salomaoa said:
I was on TWRP (modded) and rooted. Installed the update (OTA) and now my phone just reboots to TWRP no matter what I do (I have even made a factory reset and reinstalled Beta8)
Click to expand...
Click to collapse
You can't install the ota update on TWRP recovery. You need the stock one.
Try reflashing TWRP recovery via fastboot and then flash open beta 9(not the ota)

salomaoa said:
I was on TWRP (modded) and rooted. Installed the update (OTA) and now my phone just reboots to TWRP no matter what I do (I have even made a factory reset and reinstalled Beta8)
Click to expand...
Click to collapse
Download the recovery at the bottom of the page.
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_openbeta_9/
Copy it onto your phone with the this Open Beta 9 package.
Start up TWRP, format /dalvik, /cache, /system, /data.
Flash the Open Beta and clean the caches if asked.
Flash the original recovery from TWRP as recovery image, and restart your phone afterwards.
Your phone may boot into the new recovery, then show "Update failed", then do another restart, but after that mine was working.

Does all partitions support f2fs?

smk513 said:
Does all partitions support f2fs?
Click to expand...
Click to collapse
AFAIK, only data partition is f2fs

Sun90 said:
AFAIK, only data partition is f2fs
Click to expand...
Click to collapse
I wonder if the new version is possible...
Thank you for your response.

flashing with twrp will result in recovery booting loop. after downloading ota simply reboot to recovery, download oneolusrecovery from ob9 page. transfer it to phone. select install image in twrp, select reocover, flash as recovery and reboot to recovery. itll show updating.. takes about 20mins

Will modified twrp also not work?

Really? The modified twrp doesnt work? I,ve read the thread in oneplus forum and some are saying it worked for them. :/
Edit: anyways, im on modified twrp, rooted, beta 8, can i dirty flash beta 9?

jfodra said:
Really? The modified twrp doesnt work? I,ve read the thread in oneplus forum and some are saying it worked for them. :/
Click to expand...
Click to collapse
It works. I flashed the full zip with it.
Edit:
Yes you can dirty flash. Everything is working as expected.

jfodra said:
Really? The modified twrp doesnt work? I,ve read the thread in oneplus forum and some are saying it worked for them. :/
Click to expand...
Click to collapse
It will work with full zips !! It won't work it ota updates
As simple as this

Dirty flashed over OB8, everything working fine!
Edit:
Using Modified TWRP

Dirty flashed over OB8, so far no issue's.
Did flash TWRP img after update in TWRP (just to be sure), first boot took a while tho.
Anyone tried supersu?

I have this from yesterday. I was on 3.2.8 from OnePlus site, dated 12.05.16.
Clean flash with TWRP 3.0.2-1.28, thanks to eng_stk. Flash the rom & SuperSU SR5 (if you want root). Refalsh recovery 3.0.2-1.28. Reboot to recovery. If it not works reflash recovery.
Then reboot to system.
I did not flash any mods. All it's ok.

t181 said:
It works. I flashed the full zip with it.
Edit:
Yes you can dirty flash. Everything is working as expected.
Click to expand...
Click to collapse
Oh okay thanks. So is it the same as before? Flash beta 9, flash twrp again, then flash sr5 then reboot?
Edit: Nvrmind, flashed it already and d*mn. It does feel smoother than beta 8. ???

Can it be flashed over modded Open Beta 8 ?

M3ntoR said:
Can it be flashed over modded Open Beta 8 ?
Click to expand...
Click to collapse
Yep. Just make sure to have the full update and not the OTA one. Also, just in case make sure you have the TWRP img and super-su on your phone's memory to be able to flash them again

Any mirror for this? Full zip is downloading really slow and I've already stucked on twrp after OTA Need to dirty flash the full zip, but it is going to dowload around Christmas with that speed...

[ROM] OxygenOS Open Beta 10 (Nougat) Update and Installation!!

OxygenOS Open Beta 10 (Nougat) Update and Installation!!
http://downloads.oneplus.net/devices/oneplus-3/
Device OnePlus 3
Version Open Beta 10
Update time 2016-12-28
File size 1.51 GB
MD5 hash c9e3a9806c51b1c662624c2baed2af2a
What's new:
Added Data Saver
Fixed Lock Screen Clock bug in Portrait Mode
Fixed Reverting to Default Theme after Reboot
Optimized Unlocking Speed using Fingerprint
Optimized the quality of Expanded Screenshot
Optimized WiFi Performance
Optimized System Performance and Battery Consumption
Please follow the link below for the UI/UX experience survey..
Feedback on UI/UX: https://goo.gl/forms/THPRUNuxHMwzbwGj1
** Note: If you flash this Open Beta build, you’ll receive Open Beta OTAs (but not official OTAs). You’ll need to manually (clean) flash back to our official builds to continue receiving official OTAs. Rolling back to official OxygenOS versions require wiping data and cache.
Download:
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_openbeta_10/

Drive Link
https://drive.google.com/open?id=0Bw9UCrhBYd3BVGhtdk9SZ3hZUFk
Thank me Later!

Someone flashed on twrp -28 like beta 9 ?
Sent from my Pixel XL using Tapatalk

HIshan Pavidu said:
Someone flashed on twrp -28 like beta 9 ?
Click to expand...
Click to collapse
Good q.
And what If I upgrade using stock recovery, will my data partition get encrypted again?

candiesdoodle said:
Good q.
And what If I upgrade using stock recovery, will my data partition get encrypted again?
Click to expand...
Click to collapse
Idk i never used stock recovery
Sent from my Pixel XL using Tapatalk

HIshan Pavidu said:
Someone flashed on twrp -28 like beta 9 ?
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Flashed over Beta9, without any wipe, with a debloater zip and SuperSU 2.79 flashed at the same time, no problem

Downloaded in Update manager but forgot that doesn't work with twrp. Can anyone tell me where I can find the zip to flash it manually?

superiscch said:
Downloaded in Update manager but forgot that doesn't work with twrp. Can anyone tell me where I can find the zip to flash it manually?
Click to expand...
Click to collapse
This post contains the link to the full ROM zip: https://forums.oneplus.net/threads/oxygenos-open-beta-10-n-for-oneplus-3.482108/
Edit: Or just look in the first post of this thread

Minux31 said:
Flashed over Beta9, without any wipe, with a debloater zip and SuperSU 2.79 flashed at the same time, no problem
Click to expand...
Click to collapse
Which debloater did you use? Can you please post a link?
---------- Post added at 07:35 AM ---------- Previous post was at 07:19 AM ----------
Minux31 said:
Flashed over Beta9, without any wipe, with a debloater zip and SuperSU 2.79 flashed at the same time, no problem
Click to expand...
Click to collapse
Did the zip overwrite your recovery partition/TWRP? Did you have to re-flash 3.0.2-1.28 after the debloater/supersu but before initial boot?

If I flash supersu 2.79 just after installing beta 10 will it remain decrypted?
And also can someone provide the link of debloater
Thanks

EdHicks said:
Which debloater did you use? Can you please post a link?
---------- Post added at 07:35 AM ---------- Previous post was at 07:19 AM ----------
Did the zip overwrite your recovery partition/TWRP? Did you have to re-flash 3.0.2-1.28 after the debloater/supersu but before initial boot?
Click to expand...
Click to collapse
i think you can flash it in TWRP, and then flash TWRP and root again (dirty flash) but it should work
that said, you can backup data on twrp, then back it to pc, then sideload beta 10 , fast boot twrp 28 and flash root then restore data...
the reason for this that you get a cleaner rom + any updates and fixes might be there on the firmware side.

EdHicks said:
Which debloater did you use? Can you please post a link?
---------- Post added at 07:35 AM ---------- Previous post was at 07:19 AM ----------
Did the zip overwrite your recovery partition/TWRP? Did you have to re-flash 3.0.2-1.28 after the debloater/supersu but before initial boot?
Click to expand...
Click to collapse
It's a debloater I found and modified for myself : https://mega.nz/#!hcZhERQA!fPK7jwmPH8JGhpAiY6GJDIG_TD8uwb47nVdzL9RK7S4
It suppress :
AndroidPay
BasicDreams
BookmarkProvider
BTtestmode
CalendarGoogle
Chrome
Drive
EngSpecialTest
FaceLock
Galaxy4
Gmail2
Hangouts
HoloSpiralWallpaper
LiveWallpapers
LogKitSdService
Maps
Music
Music2
NoiseField
NFCTestMode
OemAutoTestServer
OEMLogKit
PartnerBookmarksProvider
PhaseBeam
Photos
Protips
SensorTestTool
SwiftKey
SwiftKeyFactorySettings
talkback
Videos
YouTube
WifiRfTestApk
com.touchtype
OnePlusWizard
OPDeviceManager
OPDeviceManagerProvider
Tag
Velvet
Feel free to use/modify it
And no, I dirty flashed full rom + debloater + supersu at the same time over ob9, and twrp .28 is still there after reboot.
But when I first installed (ob9), yes, ob9 overwrited my twrp, I reinstalled it and I flashed debloater and SuperSU after initial setup wizard (because debloater delete it)

It possible from CM13 flash Beta 10?
Or need flash Beta 7 first than flash Beta 10?
Confuse maybe so excited xD

I updated OB9 through OTA because of which my Twrp got over written by stock recovery. When I tried reinstalling twrp, it fails to decrypt data. So, I can't flash OB10 or SuperSU through TWRP.
Can someone let me know if I can flash OB10 and SuperSU through TWRP without losing my data.

Anyone try this with Dualboot ?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

meiax93 said:
It possible from CM13 flash Beta 10?
Or need flash Beta 7 first than flash Beta 10?
Confuse maybe so excited xD
Click to expand...
Click to collapse
you don't need to flash beta 7, you will need to sideload beta 10 from adb
frozenmozart said:
I updated OB9 through OTA because of which my Twrp got over written by stock recovery. When I tried reinstalling twrp, it fails to decrypt data. So, I can't flash OB10 or SuperSU through TWRP.
Can someone let me know if I can flash OB10 and SuperSU through TWRP without losing my data.
Click to expand...
Click to collapse
if you already have twrp 28 , flash beta 10 from it followed by supersu and twrp again... should work fine, if you don't have twrp, in order to decrypt you'll need to wipe data

theduke7 said:
you don't need to flash beta 7, you will need to sideload beta 10 from adb
if you already have twrp 28 , flash beta 10 from it followed by supersu and twrp again... should work fine, if you don't have twrp, in order to decrypt you'll need to wipe data
Click to expand...
Click to collapse
hahaha, i already flash beta 7
I thought must flash current version before flash beta (scared fingerprint dizzy or something else :crying

js931 said:
This post contains the link to the full ROM zip: https://forums.oneplus.net/threads/oxygenos-open-beta-10-n-for-oneplus-3.482108/
Edit: Or just look in the first post of this thread
Click to expand...
Click to collapse
The link offered by js931 it's insanely FAST 30-35mbps. THANK YOU!
Also who like's more Hydrogen, Hydrogen beta 10 it's out too. Same 28.12.2016 date.
http://www.h2os.com/download

theduke7 said:
if you already have twrp 28 , flash beta 10 from it followed by supersu and twrp again... should work fine, if you don't have twrp, in order to decrypt you'll need to wipe data
Click to expand...
Click to collapse
Thanks. I have stock recovery now. So, I presume there's no way I can root my device without losing data.
I'll just wait around in case someone has a way around. Maybe use a different version of TWRP or so.

i'm on beta 9 with TWRP. if i flash the official beta 10 .zip via twrp will that update my Firmware and Modem or do i need to manually flash them?

OxygenOS 5.0.6 for the OnePlus 3 & 3T Release - (full zip)

Changelog:
System
Updated Android security patch to 2018.9
General bug fixes and improvements
https://forums.oneplus.com/threads/oxygenos-5-0-6-ota-for-the-oneplus-3-3t.915787/
LINK(full zip)OP3: https://meocloud.pt/link/ce4bc8a6-8...gen_16_OTA_068_all_1809142124_2a02b49828.zip/
OP3T: https://drive.google.com/uc?id=1dBtV55bhnrGMn0gzVXIiW4TEzxxIl8yb&export=download

Pulling IT down...

I updated my Firmware+Modem collection for the newest Stable 5.0.6 Update!
Thank you for the download link of the full zip!

I'm in beta 39 of OP3, if I install this version will I lose my data? Will I have to give full wipe?

Any MD5 yet for the zip? Thanks!

BakuretsuBaka said:
I'm in beta 39 of OP3, if I install this version will I lose my data? Will I have to give full wipe?
Click to expand...
Click to collapse
If you are on open beta, you have to do clean install, wipe everything except internal storage, so you will lose data

Been running 5.0.6 for a few days now and don't see any issues.

Hi, need help.
My phone keep booting to recovery after flashed the zip file.
On my phone:
Magisk
Substratum theme engine

Shahrulsite said:
Hi, need help.
My phone keep booting to recovery after flashed the zip file.
On my phone:
Magisk
Substratum theme engine
Click to expand...
Click to collapse
Try clean flash, I used this zip from day one till now. All good here.

First time with oneplus 3 I got 6 hrs SOT with OOS 5.0.6 +moderate use.

someone has the recovery Oxygen 5.0.6 stock? since one plus what has been deleted from the web and I can not install by adb sideload.

th3binary said:
someone has the recovery Oxygen 5.0.6 stock? since one plus what has been deleted from the web and I can not install by adb sideload.
Click to expand...
Click to collapse
You can simply dirty flash OOS 5.0.6 if you have TWRP and you will have stock recovery.

tnsmani said:
You can simply dirty flash OOS 5.0.6 if you have TWRP and you will have stock recovery.
Click to expand...
Click to collapse
I get installation error if I try to install by twrp, but in the end and got the recovery, I leave it here, in case someone needs it.
https://www60.zippyshare.com/v/ZMUHt0N3/file.html

Flash rom
Can I flash this using twrp without encryption like a custom ROM?

mvgharat said:
Can I flash this using twrp without encryption like a custom ROM?
Click to expand...
Click to collapse
I don't think so, moreover, it will replace your twrp recovery so you'll need to flash it back.

Can I just flash it from twrp, with not encrypted data, obviously after cleaning just data and system, without formatting?
(I don't care if recovery gets overwritten).
---------- Post added at 03:28 ---------- Previous post was at 03:28 ----------
Can I just flash it from twrp, with not encrypted data, obviously after cleaning just data and system, without formatting?
(I don't care if recovery gets overwritten).

[Official] Android 9 Community Beta for OnePlus 3/3T

For Unlocked Bootloader Devices - Flash at your own risk. Make sure to take a complete internal memory backup before flashing.
Following is a copy-paste from OP Forums
Hey everyone,
We know everyone is excited to finally try the delicious Pie update on the OnePlus 3 and OnePlus 3T. Thanks to the feedback from our beta testers, we are getting closer to launching Android Pie on the OnePlus 3 and 3T.
Now, we would like to invite you to download and try the Community Build available here and continue to help us shaping the stable update. Anyone can try this build, but please have in mind it won’t be available via OTA, you’ll have to download and install it yourself.
Community Beta for OnePlus 3
https://oxygenos.oneplus.net/OnePlus3Oxygen_16_OTA_075_all_1904171151_74affb85cc694452.zip
Community Beta for OnePlus 3T
https://oxygenos.oneplus.net/OnePlus3TOxygen_28_OTA_075_all_1904171149_20a0443ddf734944.zip
Those who download the Community Beta build will get OTA update when the stable build is released.
Changelog
System
Updated system to Android™ 9 Pie™
Brand new UI for Android Pie
Updated Android security patch to 2019.4
Do Not Disturb mode
New Do Not Disturb mode with adjustable settings
New Gaming mode 3.0
Added text notification mode
Added notification for 3rd party calls
Phone
Deep integration with Google Duo
Camera
Integrated Google Lens mode
Instructions for updating to the Community Build
For those on the latest stable version 181206
Preconditions: Boot Loader should be locked
Steps:​
Download the file from the link provided on the forum post
Move the downloaded file to internal storage root folder using the File Manager.
The device can then be updated via two methods.
First method: Local Update
Open Settings -> System update -> Click top right setting icon
Choose Local update
Click on the downloaded file and wait until the device reboots
Second Method: Recovery Update
Turn off the device -> Press power and volume up key simultaneously until the device enters the Fastboot Mode
Navigate to Recovery option using volume and power button -> Choose English -> Install from Internal storage -> Select the downloaded zip file -> Select 'Yes'
Wait until the installation is complete -> Reboot
​
For those who are on the latest Open Beta version 180712
Note: The entire data will be wiped since there will be a version transition from Open beta to the stable version. If you made a OnePlus Switch backup, be sure to make a copy of it before moving forward.
Steps:
Download the file form the link provided on the forum post
Move the downloaded file to internal storage
Device can be updated only via Recovery Update:
Turn off the device -> Press power and volume up key simultaneously until the device enters the Fastboot Mode
Navigate to Recovery option using volume and power button -> Choose English -> Install from Internal storage -> Select the downloaded zip file -> Select 'Yes'
Wait until the installation is complete -> Reboot
​
Thank you once again for all your patience and we can’t wait to get your feedback.
We are one step closer to releasing the Pie for OnePlus 3 / 3T, you can now download and try our community build right now.
Never Settle.
EDIT 1
Procedure that worked for me
So I've managed to install it and as expected, I had to format and delete everything on my internal memory. Here is the procedure I've followed and I'm 100% sure it'll work for others too.
Stuff I did before flashing:
1. Took a complete backup of internal memory.
2. Downloaded ROM + Recovery ( I use Holy Dragon custom twrp) + magisk 18.1 zip to an external OTG drive
My Configuration before flashing:
OOS 5.0.8, Unlocked BL, Magisk and root, Custom Kernel, Custom HolyDragon recovery
Procedure I followed:
1. Boot to recovery.
2. Wipe System, Dalvik, Cache
3. "Format Internal Memory". Please note, I formatted internal memory, not just wiped. This will remove encryption for once which will help the rom boot. It won't boot on encrypted partition with unlocked bootloader on first start up.
4. Flashed ROM zip.
5. Flashed twrp image.
6. Pressed power button for as long as possible until it rebooted again.
7. Pressed volume button before it could reboot so that i can select recovery. This step is important. If you won't do it, your recovery will be replaced with stock one.
8. Flash magisk zip. 18.1
9. Reboot system. It will take 10-15 minutes as it will reencrpt the storage.
10. Profit! Enjoy your new official oos pie on OP3/T.
Some things to note:
1. On first boot, it WILL NEED either mobile data or wifi. It downloaded some update and then installed and proceeded.
2. It will ask for your previous pattern. It didn't work for me so i simply login with my previous Gmail account on 5.0.8 and login successfully.
3. You will need to install magisk manager on first boot. It will show magisk not installed. Don't panic. Simply reboot your device once and it will appear in magisk on second reboot.
EDIT 2:
Community Beta 2 Released 5/6/2019
Hey everyone,
Here is the Community beta 2 for the OnePlus 3 and OnePlus 3T, the update primarily contains bug fixes:
Changelog
Bug fixes
Clock timer and stopwatch interface display is incomplete
Microphone doesn't work when earphones are plugged in
Crash issues with native message app
Community Beta 2 for OnePlus 3
https://oxygenos.oneplus.net/OnePlus3Oxygen_16_OTA_080_all_1905061403_459f9d6e543f4a16.zip
Community Beta 2 for onePlus 3T
https://oxygenos.oneplus.net/OnePlus3TOxygen_28_OTA_080_all_1905061406_f9d7f76f3a5d45da.zip

I am at the latest open beta, unlocked bootloader, rooted with twrp recovery. Does anyone know if I could flash this build through twrp?

brian13th said:
I am at the latest open beta, unlocked bootloader, rooted with twrp recovery. Does anyone know if I could flash this build through twrp?
Click to expand...
Click to collapse
I am currently at work. I will flash it once I am home. but make sure you take complete backup of your internal memory. It will mess up your internal data partition if you have unlocked bootloader. Don't take an unnecessary risk with your data.

Flashed over closed pie beta (unlocked bootloader) with stock recovery. No internal data lost. :laugh:

FSadino said:
Flashed over closed pie beta (unlocked bootloader) with stock recovery. No internal data lost. :laugh:
Click to expand...
Click to collapse
Flashed over closed pie beta (unlocked bootloader) with Red Wolf recovery. No problem, no data loss.

FSadino said:
Flashed over closed pie beta (unlocked bootloader) with stock recovery. No internal data lost. :laugh:
Click to expand...
Click to collapse
kojakcr said:
Flashed over closed pie beta (unlocked bootloader) with Red Wolf recovery. No problem, no data loss.
Click to expand...
Click to collapse
That makes sense as you already had the closed pie build. Also, one question, are you both currently encrypted?

abhibnl said:
That makes sense as you already had the closed pie build. Also, one question, are you both currently encrypted?
Click to expand...
Click to collapse
I am

FSadino said:
I am
Click to expand...
Click to collapse
Seems like there is no other way than to format internal memory once. I'm on stock 5.0.8 rooted and UL BL

Where I found a download link from stock recovery.
On the OnePlus page I don't found it.
After flash stock recovery I must locked bootloader
Thanks
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app

Clean install, twrp 3.30-1, magisk, everything's fine
Thank you oneplus

On the 3T build I can't get it to install magisk for God's sake. The system partition is full and it seems it installs magisk fine, but when I boot up it says it isn't installed.... Tried different versions from 17.2 to 19

What's the procedure if I'm on twrp with custom rom?

Ed_Newgate said:
What's the procedure if I'm on twrp with custom rom?
Click to expand...
Click to collapse
The procedure is always the same, the results may be different.
Factory reset
Wipe data, system, cache, art
Flash zip
Reboot

So I've managed to install it and as expected, I had to format and delete everything on my internal memory. Here is the procedure I've followed and I'm 100% sure it'll work for others too.
Stuff I did before flashing:
1. Took a complete backup of internal memory.
2. Downloaded ROM + Recovery ( I use Holy Dragon custom twrp) + magisk 18.1 zip to an external OTG drive
My Configuration before flashing:
OOS 5.0.8, Unlocked BL, Magisk and root, Custom Kernel, Custom HolyDragon recovery
Procedure I followed:
1. Boot to recovery.
2. Wipe System, Dalvik, Cache
3. "Format Internal Memory". Please note, I formatted internal memory, not just wiped. This will remove encryption for once which will help the rom boot. It won't boot on encrypted partition with unlocked bootloader on first start up.
4. Flashed ROM zip.
5. Flashed twrp image.
6. Pressed power button for as long as possible until it rebooted again.
7. Pressed volume button before it could reboot so that i can select recovery. This step is important. If you won't do it, your recovery will be replaced with stock one.
8. Flash magisk zip. 18.1
9. Reboot system. It will take 10-15 minutes as it will reencrpt the storage.
10. Profit! Enjoy your new official oos pie on OP3/T.
Some things to note:
1. On first boot, it WILL NEED either mobile data or wifi. It downloaded some update and then installed and proceeded.
2. It will ask for your previous pattern. It didn't work for me so i simply login with my previous Gmail account on 5.0.8 and login successfully.
3. You will need to install magisk manager on first boot. It will show magisk not installed. Don't panic. Simply reboot your device once and it will appear in magisk on second reboot.
Let me know if you need additional help.

would u say worth changing to this from the one3os cb rom all seems to be the same there as this?

ireaper4592 said:
would u say worth changing to this from the one3os cb rom all seems to be the same there as this?
Click to expand...
Click to collapse
I can't say for sure. I have never tested CB. But this is the latest we have and it could have some under the hood fixes. I would recommend flashing this over CB

I need some help. I was on the latest Lineage OS version, got into recovery and formatted my data. Then I flashed the OOS Pie version. Got stuck on the OOS boot animation. Then I tried flashing the last OOS Beta and the last Official OOS but both are stuck on the same OOS boot animation. I also tried locking my bootloader and then starting again but didnt work out either...

HouseFuzzy said:
I need some help. I was on the latest Lineage OS version, got into recovery and formatted my data. Then I flashed the OOS Pie version. Got stuck on the OOS boot animation. Then I tried flashing the last OOS Beta and the last Official OOS but both are stuck on the same OOS boot animation. I also tried locking my bootloader and then starting again but didnt work out either...
Click to expand...
Click to collapse
You should be stuck on the booatanimation for at least 10-15 minutes. It's re-encrypting your /data partition.

abhibnl said:
You should be stuck on the booatanimation for at least 10-15 minutes. It's re-encrypting your /data partition.
Click to expand...
Click to collapse
Alright gonna give it an other try then. Flashed the Pie OOS now via TWRP at around 11.20 german time. If its not getting over the boot animation by like 12.00 german time im gonna reply again.
---------- Post added at 12:16 PM ---------- Previous post was at 11:27 AM ----------
abhibnl said:
You should be stuck on the booatanimation for at least 10-15 minutes. It's re-encrypting your /data partition.
Click to expand...
Click to collapse
Alright been letting it go an hour now. Still in the boot animation.

svandasek said:
On the 3T build I can't get it to install magisk for God's sake. The system partition is full and it seems it installs magisk fine, but when I boot up it says it isn't installed.... Tried different versions from 17.2 to 19
Click to expand...
Click to collapse
Having similar issue, but on my side Magisk is installed, apps correctly receives the root privileges, but AdAway can't install the hosts file, it says system partition is full.