Related
I read through many threads and have followed the official Sony bootloader unlocking instructions. I have requested and received the unlock code from Sony via email. I have downloaded the inf file and placed it in the correct folder in Android SDK (which I also updated). But I am cannot access fastboot mode, I hold down Vol + and plug in the USB cable but the device shows a red led and goes into charging mode. Also the PC never prompts me to install fastboot driver it simply loads the SP as Sony mass storage device (in device manager).
I have read that some people seem to think that the SIM lock affects the ability to access fastboot but this SP is SIM unlocked. Sony's official guide to unlocking the bootloader says I need to access fastboot mode to enter the unlock code but how can I unlock the bootloader if I can't get into fastboot mode?
hmmm... don't know really... i once entered fastboot mode by mistake, while trying to root stock rom. wasn't reading instructions and put device in a fsatboot mode instead of debugging... was on stock rom so don't know if custom rom would let me do that. should check myself... if anything i know it is possible to get me that blue light shining.
To enter fastboot mode in Xperia SP just power down the phone and hold down the volume up key while pluging your phone into your pc
If you need flashmode do the same thing but with the volume DOWN button held down.
I´ve got the same problem. I can´t enter in flashmode neither in fastboot mode. I´m on windows 8 32bits and I installed the .245 Deodexed ROM with a problem on root and without CWM. I don´t know what to do now, please help me.
As I explained in the first post, I understand how to access fastboot mode (and flash mode). I got root and backed up the TA partition, the stock apps (from 1.257) and backed up the stock ROM. Then, after I wasn't able to get into fastboot, I have installed CWM for LB and flashed a custom ROM based on 2.245. I am able to enter flash mode but not fastboot. As I said before, the phone is SIM unlocked but is acting like it came from a carrier, with locked bootloader and fastboot disabled. How can Sony disable fastboot? I don't get it. Any one want to take a guess how long I will have to wait until some clever dev finds an exploit?
gandalf_grey91 said:
As I explained in the first post, I understand how to access fastboot mode (and flash mode). I got root and backed up the TA partition, the stock apps (from 1.257) and backed up the stock ROM. Then, after I wasn't able to get into fastboot, I have installed CWM for LB and flashed a custom ROM based on 2.245. I am able to enter flash mode but not fastboot. As I said before, the phone is SIM unlocked but is acting like it came from a carrier, with locked bootloader and fastboot disabled. How can Sony disable fastboot? I don't get it. Any one want to take a guess how long I will have to wait until some clever dev finds an exploit?
Click to expand...
Click to collapse
Sorry for that i dont think that it is your computers fault because you enter fastboot (and flashmode) using your mobile phone NOT your PC
So i would roughly assume that this is a Rom bug or something in the flashing proccess went wrong.
jackaros said:
Sorry for that i dont think that it is your computers fault because you enter fastboot (and flashmode) using your mobile phone NOT your PC
So i would roughly assume that this is a Rom bug or something in the flashing proccess went wrong.
Click to expand...
Click to collapse
Thanks for trying to help, but I understand that flashmode and fastboot are accessed using the phone. Actually the phone needs a piece of software like flashtool to keep it in flashmode otherwise it drops into charging mode. I didn't mention my computer so I don't know where you got that from.
As I explained, I am unable to access fastboot with stock ROM (1.257) and a custom ROM (based on 2.245) so it can't be a ROM bug or the flashing process having gone wrong.
if it's not too much of a trouble for you, go and flash .245 stock, than .257 stock kernel only. like you are trying to root it for the first time, complete rooting procedure, and than proceed on to installing CWM, but instead of connecting device in debugging mode to install CWM, try and see if you can put it in a fastboot. this was exactly the moment when i accidentally put mine SP in fastboot. of course, i'm not saying to go ahead and install anything if you score, but only to confirm if you can put your device into a fastboot mode since installing anything without CWM will likely soft brick your device.
Same problem here, i can't do anything using flashtool after flashed 2.245. I did with SUS, maybe is some flashtool issue.
Ze Tolas said:
Same problem here, i can't do anything using flashtool after flashed 2.245. I did with SUS, maybe is some flashtool issue.
Click to expand...
Click to collapse
It may be a flashtool problem you are right because 2 incidents with different Roms that both use flashtool to flash those roms.....
its pretty much self explenatory.
skojevac said:
if it's not too much of a trouble for you, go and flash .245 stock, than .257 stock kernel only. like you are trying to root it for the first time, complete rooting procedure, and than proceed on to installing CWM, but instead of connecting device in debugging mode to install CWM, try and see if you can put it in a fastboot. this was exactly the moment when i accidentally put mine SP in fastboot. of course, i'm not saying to go ahead and install anything if you score, but only to confirm if you can put your device into a fastboot mode since installing anything without CWM will likely soft brick your device.
Click to expand...
Click to collapse
Interesting. Ok, I've read up on the process. So I use the various stock .ftf files and flashtool with the phone in flash mode? Bear in mind that kernel didn't allow fastboot when I used it with the stock .257 ROM the device came with. If I do it, I will nandroid backup first, of course, but I think I remember reading in one thread that someone managed to soft brick their XSP doing this very thing.
Bear in mind that kernel didn't allow fastboot when I used it with the stock .257 ROM the device came with. [/QUOTE said:
that's why you need to complete rooting procedure. root stock 1.257 kernel, than back to stock 2.245 with root preserved, and before you would install CWM try to put device in a fastboot mode, this assuming you still have a UB.
Click to expand...
Click to collapse
have you tried to boot into android, open a root terminal and type
exec reboot bootloader
that should bring you straight into fastboot
SuicideFlasher said:
have you tried to boot into android, open a root terminal and type
exec reboot bootloader
that should bring you straight into fastboot
Click to expand...
Click to collapse
All that happens is that the terminal session ends and closes (not FC) the terminal app. Using the same command via adb just does a standard reboot.
i just placed my in a fastboot mode, no problems whatsoever. do you have drivers for the device installed? you will find these in flashtool installation folder.
skojevac said:
i just placed my in a fastboot mode, no problems whatsoever. do you have drivers for the device installed? you will find these in flashtool installation folder.
Click to expand...
Click to collapse
Yes. The fastboot_with_android_usb_file.rar package specified on DooMLoRD's bootloader unlocking/relocking appears to have been removed and there are no new links in that thread. So, I found and installed the drivers included with the flashtool. But it seems to be the device that is the problem. It is acting like a carrier locked model. I am rapidly starting to believe that this one has a locked bootloader.
gandalf_grey91 said:
Yes. The fastboot_with_android_usb_file.rar package specified on DooMLoRD's bootloader unlocking/relocking appears to have been removed and there are no new links in that thread. So, I found and installed the drivers included with the flashtool. But it seems to be the device that is the problem. It is acting like a carrier locked model. I am rapidly starting to believe that this one has a locked bootloader.
Click to expand...
Click to collapse
I said before, it's new firmware (maybe RU) with a Windows Flashtool issue. Today i did flash kernel to my SP using Linux client.
Same issues
gandalf_grey91 said:
All that happens is that the terminal session ends and closes (not FC) the terminal app. Using the same command via adb just does a standard reboot.
Click to expand...
Click to collapse
Hi, I have some similar issues. I've also been flashing some stuff and whenever I try to go to fastboot it just boots into CWM. Very annoying to say the least. The dark blue light goes on when i hold down volume up and for a short moment I see the fastboot driver installing on my computer. But before it completes it's already in CWM.
Not sure what to do from here on wards, maybe some advice on which kernel to flash? I am pretty sure the latest kernel I flashed is the .254 root kernel from doomlord.
Ps. I really would like to flash CM when it becomes available as nightly :angel:
Thanks in advance!
Fast boot mode for xperia ion hspa???
gandalf_grey91 said:
As I explained in the first post, I understand how to access fastboot mode (and flash mode). I got root and backed up the TA partition, the stock apps (from 1.257) and backed up the stock ROM. Then, after I wasn't able to get into fastboot, I have installed CWM for LB and flashed a custom ROM based on 2.245. I am able to enter flash mode but not fastboot. As I said before, the phone is SIM unlocked but is acting like it came from a carrier, with locked bootloader and fastboot disabled. How can Sony disable fastboot? I don't get it. Any one want to take a guess how long I will have to wait until some clever dev finds an exploit?
Click to expand...
Click to collapse
I had already installed cm10.1 jb for my xperia ion.
Now i tried to install cm11 kitkat for my xperia ion.
Every thing is gone good.
But now got stuck up with a problem.
fast boot mode is active only for 5 seconds while connecting my xperia ion to System with flash tool.
help me to do the need ful.
Guide me to download compatible drivers and flash tool for fast booting process.
If you have UNLOCKABLE bootloader, then you dont have a FASTBOOT mode on your phone. Its just pure luck. some phones dont have it... kind of a sony crap... I also happen to be one of those LUCKY ppl. no unlock, so stuck with Stock kernel forever.
When you connect your phone to Flashtools in FLASHMODE...
See for a string BOOTLOADER: NOT_ROOTABLE.... it means you belong in the lucky group...
If it says rootable, then you're doing something wrong.
Pardon me if i read something incorrect. i skimmed through all the posts before posting.
I use Docomo SO02E version, rooted, and install firmware 10.3.1.A.0.244 (not Japan firmware version),
It ran well.
But I just did a stupid thing.
I flashed Kernel and BaseBand from 10.3.1.A.2.67
Now my phone keeping said "process system is not responding ...", and keep rebooting.
I want use flashtool to flash new firmware. But it didn't recognize the phone, even when I hold VOL-down and plug USB.
Can somebody help me !!!!
Anf fastboot mode? Vol up and usb
thank you for your reply.
I can put it into fastboot mode.
but I don't know how to use fastboot mode.
(my phone is locked BL)
Sorta had the same thing happen to me. I just started the flash tool up and chose the Rom I wanted, then when it was waiting for me to plug in the phone I just held down volume. Button while it was rebooting and it took.
Had to try a few times but it worked.
I used to face the same problem. I solved it by entering fastboot mode and flash from there.
@bynoud
Do you need help or ist it working now?
Sorry for my late.
I still need help (I just backed from office)
I try many ways below:
1) plug USB before flashtool ask, then when it ask, press many time down-vol
2) plug USB before flashtool ask, then when it ask,
press up-vol+power to reboot, when screen go black quickly release power button and press down-vol
none of them work .... :crying:
kingrion88 said:
I used to face the same problem. I solved it by entering fastboot mode and flash from there.
Click to expand...
Click to collapse
Thank you for your information.
but I don't know how to flash ROM from fastboot mode (sorry for my noob)...
My phone is locked BL.
And when I tried to flash kernel.sin, it said error "command is not allowed..." (or something like that)
PS: I'm sorry for inconvenience it may cause.
It's seem I'm in very different time zone. So I can not read you guys reply quickly
Which kernel you tryed? You have to try a stock kernel. I will be in 2 hours home, maybe I can give a look to the flashtool again..
Where you live
I tried with kernel from D1.343 (original firmware of SO02E) and 10.3.1.A.0.244
both were failed.
gripfly said:
Where you live
Click to expand...
Click to collapse
I'm from Vietnam
Hi guys,
My C6903 is bricked after an attempt to flash the Resurrection Remix® Lollipop v5.3.8 - Honami rom. The device was rooted and was on TrinityVengeanceRaptorX™ HD 1.3 rom with TWRP recovery installed.
I followed the install guide step by step, battery level was around 80%, and then after the rebooting process, nothing happened. It won't turn on, and it won't even charge. Then I tried to use flashtool to flash official rom, but the phone won't get into flashmode, when I press the volume - button and plug the usb, the red light flashed once followed by a green light flash, then nothing happens. I tried the PC Companion, it can't find the phone. The only thing is that when I press the volume + button and connect the usb cable, the blue light is on, not sure if it means anything. Anyone please help me.
Thanks
The blue light is flashmode You can flash an complete ftf file
-Happy Feet- said:
The blue light is flashmode You can flash an complete ftf file
Click to expand...
Click to collapse
Thanks for your reply. I just tried again with the blue light on, it won't work, the flash process won't continue, it still asks me to plug my phone.
yyfiremaple said:
Hi guys,
My C6903 is bricked after an attempt to flash the Resurrection Remix® Lollipop v5.3.8 - Honami rom. The device was rooted and was on TrinityVengeanceRaptorX™ HD 1.3 rom with TWRP recovery installed.
Thanks
Click to expand...
Click to collapse
I think Resurrection Remix® Lollipop has not built for c6903
Do not be sad your device is not hard bricked ( because of green light ) :fingers-crossed:
your pc or cable may has problem
isn't the blue light Fast boot mode
biggy81168 said:
isn't the blue light Fast boot mode
Click to expand...
Click to collapse
Oops you are right... But he can flash an kernel to boot up. When the device has an unlocked Bootloader. But I think also the cable is the problem.
could be the cable . yes i think you are right he could try fastboot flash any boot img witch contains a twrp recovery !! least gets him into a custom recovery .
Thanks for the help from everyone, I just tried two other cables,no luck. I guess we can eliminate the bad cable possibility. I'd like to try the flash boot img in fastboot mode option next, anyone knows where I can find the right boot img file?Also I didn't unlock my bootloader, does it matter...? Thanks again.
yyfiremaple said:
Thanks for the help from everyone, I just tried two other cables,no luck. I guess we can eliminate the bad cable possibility. I'd like to try the flash boot img in fastboot mode option next, anyone knows where I can find the right boot img file?Also I didn't unlock my bootloader, does it matter...? Thanks again.
Click to expand...
Click to collapse
Check the drivers,update flashtool,disable antivirus programs if any then try flashing stock ftf with cable you know works try to connect other phone to computer with cables you have then try to flash ftf with the working cable. Also any lollipop rom needs unlocked bootloader
Please read 1 page of any rom carefully before flashing...:thumbup:
I am currently using the rom you tried to flash and it works perfectly but also i unlocked my bootloader before flashing if you decide to unlock bootloader then NEVER forget to BACKUP YOUR TA BEFORE UNLOCKING YOUR BOOTLOADER...!!!
I recently got a z3c and decided to try to get a slim rom on it.
I have done the following:
I unlocked the bootloader.
This was done successfully to the best of my knowledge
The next thing I did was flash a cwm image to by z3c using fastboot. The problem was that I flashed the z3 version on my z3c.
The device would boot but the screen would be blank.
Later I flashed the z3c boot loader named : Z3c_DooMLoRD_AdvStkKernel_v01_FW-105
After this the device goes in a boot loop. I am able to access CWM.
I have tried to root the phone as well as flash the slim rom in an attempt to fix it....
Wiping disk / cache doesn't help.
Also for some reason even though adb drivers are installed I cannot use it so I can't get the twrp install to work.
I have no idea what to do can someone please help?
Thanks,
stp
I have same issue....Phone is ib bootloop...i can still go to fastboot mode....
Anything can be done here????
Flash an factory image with flashtool then you will have original recovery. Then reinstall CWM, maybe smth went wrong.
Tried flashtool---Ended up with errors as attached pic
As i cant bootup my phone...USB Debugging option cant be ticked
I was running SlimLP (unofficial) while bricked my phone....
Anything on that please....
I managed to recover my phone. I don't think you need usb debugging for flash tool. What I did was turn the phone off (power and volume up seem to be the buttons that force shutdown and break the reboot loop).
flashtool will prompt you to connect when you flash the ftf file and you hold power up and volume down when you connect the usb cable. If you have issues flashing (it hanged on me on system.bin) try restarting your computer.
Resolution and Problem Exp
Right after flashing the device recovery through fastboot the USB cable is plugged and that seems to loop the boot loader, so you need to force shutdown while looping by pressing POWER + VOLUME UP, and after that unplug the USB cable. You will notice that on boot now the light is no longer red.
splitthepositive said:
I recently got a z3c and decided to try to get a slim rom on it.
I have done the following:
I unlocked the bootloader.
This was done successfully to the best of my knowledge
The next thing I did was flash a cwm image to by z3c using fastboot. The problem was that I flashed the z3 version on my z3c.
The device would boot but the screen would be blank.
Later I flashed the z3c boot loader named : Z3c_DooMLoRD_AdvStkKernel_v01_FW-105
After this the device goes in a boot loop. I am able to access CWM.
I have tried to root the phone as well as flash the slim rom in an attempt to fix it....
Wiping disk / cache doesn't help.
Also for some reason even though adb drivers are installed I cannot use it so I can't get the twrp install to work.
I have no idea what to do can someone please help?
Thanks,
stp
Click to expand...
Click to collapse
Hi,
I just installed this rom:
http://forum.xda-developers.com/xperia-sp/development/final-solution-rom-lbl-t3073678
Everything went fine. I did all the steps. After installing the ROM and the fixes I chose system reboot from CWM Recovery. Since then I can't turn my phone on. If I press the power button there is a short vibration, but nothing happens.
1. Tried to reset with the button on the back of the phone. No go.
2. Tried all the button combination but can't even get back to recovery.
3. If I connect it to my computer then the led goes green and windows gives me that sound when you connect something new, but after 10 seconds the led turns off and I get the other sound for dismounting device. No diver can see it, neither flashtool does.
4. It doesn't charge. Well, at least the led does not turn on so I guess it's not charging.
Any idea?
You have a kernel problem, Flash with Flashtool the kernel of your rom in fastboot mode (Volume +, and connect your usb cable) with flashtool or if that don't available, flash a stock kernel in fastboot mode (Volume + and connect your usb cable at your phone), when it's flashed, restart your phone
Vic19911992 said:
You have a kernel problem, Flash with Flashtool the kernel of your rom in fastboot mode (Volume +, and connect your usb cable) with flashtool or if that don't available, flash a stock kernel in fastboot mode (Volume + and connect your usb cable at your phone), when it's flashed, restart your phone
Click to expand...
Click to collapse
From where can I get a proper kernel? Does it matter that it has locked bootloader?
Also which flashtool should work?
fishmong3r said:
From where can I get a proper kernel? Does it matter that it has locked bootloader?
Also which flashtool should work?
Click to expand...
Click to collapse
Normally, you can flash the kernel included in your rom, it's a file name boot.img, flashtool is good i think, can you send error messages with flashtool if you have any messages
fishmong3r said:
Hi,
I just installed this rom:
http://forum.xda-developers.com/xperia-sp/development/final-solution-rom-lbl-t3073678
Everything went fine. I did all the steps. After installing the ROM and the fixes I chose system reboot from CWM Recovery. Since then I can't turn my phone on. If I press the power button there is a short vibration, but nothing happens.
1. Tried to reset with the button on the back of the phone. No go.
2. Tried all the button combination but can't even get back to recovery.
3. If I connect it to my computer then the led goes green and windows gives me that sound when you connect something new, but after 10 seconds the led turns off and I get the other sound for dismounting device. No diver can see it, neither flashtool does.
4. It doesn't charge. Well, at least the led does not turn on so I guess it's not charging.
Any idea?
Click to expand...
Click to collapse
If you have locked bootloader you must flash the stock kernel trough the flashmode, williams kernel is custom it will brick your device
Spasik said:
If you have locked bootloader you must flash the stock kernel trough the flashmode, williams kernel is custom it will brick your device
Click to expand...
Click to collapse
I double checked that it works for locked bootloaded. It's even the name of the thread: [Final Solution ROM][UBL/LBL][V2][ODEXED for extreme smoothness][William's Kernel]
So the issue now is that I can't even install the driver (windows 10) as the device is being disconnected after 10 seconds of plugging in. I got the tft file now for the stock kernel and installed flashtool but it can't detect the phone (in that 10 secs), it says that driver is missing. Tried the C:\Flashtool\drivers\Flashtool-drivers.exe and selected the necessary drivers but it never succeeds. Attached the screenshot of the failure of installing the drivers.
fishmong3r said:
I double checked that it works for locked bootloaded. It's even the name of the thread: [Final Solution ROM][UBL/LBL][V2][ODEXED for extreme smoothness][William's Kernel]
So the issue now is that I can't even install the driver (windows 10) as the device is being disconnected after 10 seconds of plugging in. I got the tft file now for the stock kernel and installed flashtool but it can't detect the phone (in that 10 secs), it says that driver is missing. Tried the C:\Flashtool\drivers\Flashtool-drivers.exe and selected the necessary drivers but it never succeeds. Attached the screenshot of the failure of installing the drivers.
Click to expand...
Click to collapse
You must turn off driver verification, g00gle it
Spasik said:
You must turn off driver verification, g00gle it
Click to expand...
Click to collapse
OK, I'm getting closer. Thank you so far.
So drivers are installed. Computer can detect phone. All I can't do is to boot my phone to fast boot. It's always in flash mode not fast boot. I'm trying to power on and pushing the volume down, but no go.
Code:
26/049/2015 21:49:27 - INFO - Device connected in flash mode
26/049/2015 21:49:32 - INFO - Now plug your device in Fastboot Mode
fishmong3r said:
OK, I'm getting closer. Thank you so far.
So drivers are installed. Computer can detect phone. All I can't do is to boot my phone to fast boot. It's always in flash mode not fast boot. I'm trying to power on and pushing the volume down, but no go.
Code:
26/049/2015 21:49:27 - INFO - Device connected in flash mode
26/049/2015 21:49:32 - INFO - Now plug your device in Fastboot Mode
Click to expand...
Click to collapse
you must start with phone turned off, fastboot doesnt work because you have hardlocked bootloader
pick stock ftf of your choice let it load and when it prompts you connect turned off phone with volume- pressed
then root it with towelroot and install super su, open it and update su binary
when you will be done with that contact me or respond to this post i will help you with next steps
Spasik said:
you must start with phone turned off, fastboot doesnt work because you have hardlocked bootloader
pick stock ftf of your choice let it load and when it prompts you connect turned off phone with volume- pressed
then root it with towelroot and install super su, open it and update su binary
when you will be done with that contact me or respond to this post i will help you with next steps
Click to expand...
Click to collapse
OK, to be honest I don't get any of that. What is towelroot, how to install super su and how to update its binary? Also what do you mean "let it load" (ftf)?
I have to mention that the bootloader is locked because it can't be unlocked.
fishmong3r said:
OK, to be honest I don't get any of that. What is towelroot, how to install super su and how to update its binary? Also what do you mean "let it load" (ftf)?
I have to mention that the bootloader is locked because it can't be unlocked.
Click to expand...
Click to collapse
Yeah i know that your bootloader is not unlockable, by ftf loading i mean that select .ftf you want to flash first and wait until it prepares and prompts you to connect the phone, btw last flashtool that works with sp is flashtool-0.9.18.6 , if you will have problem with understanding that try to search how to flash ftf on xperia sp on youtube i hope you will get it eventually
towelroot is an app from geohot you can get it here https://towelroot.com/ it can root your device
super su is an app on google play it is free and it controls root apps, in other words it grants or denies root access, once you will gain root with towelroot, open super su and it will prompt you to update binary just select normal and it will work
Spasik said:
Yeah i know that your bootloader is not unlockable, by ftf loading i mean that select .ftf you want to flash first and wait until it prepares and prompts you to connect the phone, btw last flashtool that works with sp is flashtool-0.9.18.6 , if you will have problem with understanding that try to search how to flash ftf on xperia sp on youtube i hope you will get it eventually
towelroot is an app from geohot you can get it here https://towelroot.com/ it can root your device
super su is an app on google play it is free and it controls root apps, in other words it grants or denies root access, once you will gain root with towelroot, open super su and it will prompt you to update binary just select normal and it will work
Click to expand...
Click to collapse
I have version 0.9.19.10. And I can't select the file before I connect the phone with fastboot. The file has to be selected after. This is the tutorial I try to follow:
https://www.youtube.com/watch?v=IXTzA7Qrrv4
So my problem is still that I can't get into fastboot to flash the kernel. So towelroot and super su are not my options until I can't get into the system.
Any other clue on how to get it flashed?
fishmong3r said:
I have version 0.9.19.10. And I can't select the file before I connect the phone with fastboot. The file has to be selected after. This is the tutorial I try to follow:
https://www.youtube.com/watch?v=IXTzA7Qrrv4
So my problem is still that I can't get into fastboot to flash the kernel. So towelroot and super su are not my options until I can't get into the system.
Any other clue on how to get it flashed?
Click to expand...
Click to collapse
you cant use fastboot with your bootloader locked that is the point there is NO WAY of flashing custom kernel with bootloader locked or you will brick your device, only way to flash kernel on lbl is to flash stock kernel in your case WITH FLASHTOOL TROUGH FLASHMODE
https://www.youtube.com/watch?v=Sz3LVw_MfzQ this may help you understand what i am trying to tell you
Spasik said:
you cant use fastboot with your bootloader locked that is the point there is NO WAY of flashing custom kernel with bootloader locked or you will brick your device, only way to flash kernel on lbl is to flash stock kernel in your case WITH FLASHTOOL TROUGH FLASHMODE
https://www.youtube.com/watch?v=Sz3LVw_MfzQ this may help you understand what i am trying to tell you
Click to expand...
Click to collapse
I understand what you are saying. But flashtool doesn't let me flash kernel in flash mode.
So it's a catch 22? After all this means that it's already bricked, isn't it?
fishmong3r said:
I understand what you are saying. But flashtool doesn't let me flash kernel in flash mode.
So it's a catch 22? After all this means that it's already bricked, isn't it?
Click to expand...
Click to collapse
You are not trying to flash kernel only, but that is possible too, you are trying to flash whole stock firmware.
Yes your phone is bricked because you flashed custom kernel on LBL.
Download some .205 or .207 firmware from android development section of xperia sp xda forum and flash it with flashtool.
There are plenty of tutorials online, i dont mean to be rude but you just must try and understand it yourself.
Here you have link for firmwares http://forum.xda-developers.com/showthread.php?t=2311964
just flash the ftf and phone should be ok, if you will be succesfull i can help you with rooting and flashing something suitable for locked bootloader xperia sp
Good luck
Spasik said:
You are not trying to flash kernel only, but that is possible too, you are trying to flash whole stock firmware.
Yes your phone is bricked because you flashed custom kernel on LBL.
Download some .205 or .207 firmware from android development section of xperia sp xda forum and flash it with flashtool.
There are plenty of tutorials online, i dont mean to be rude but you just must try and understand it yourself.
Here you have link for firmwares http://forum.xda-developers.com/showthread.php?t=2311964
just flash the ftf and phone should be ok, if you will be succesfull i can help you with rooting and flashing something suitable for locked bootloader xperia sp
Good luck
Click to expand...
Click to collapse
Wait a sec. It seems I could flash the kernel in flash mode.
It was keep disconnecting but finally the sony logo appeared and it booted to the system. It doesn't work properly, and it's very slow, but now I can get into CWM. Do you have any suggestion which ROM should I install on it?
fishmong3r said:
Wait a sec. It seems I could flash the kernel in flash mode.
It was keep disconnecting but finally the sony logo appeared and it booted to the system. It doesn't work properly, and it's very slow, but now I can get into CWM. Do you have any suggestion which ROM should I install on it?
Click to expand...
Click to collapse
yes
this is debloated stock http://forum.xda-developers.com/xperia-sp/development/rom-binomical-v1-1-final-t3111555
works great
and this is lbl cm11 http://forum.xda-developers.com/xperia-sp/development/rom-cyanogenomod-11-xperia-sp-t3041391
great aosp rom for lbl device
Spasik said:
yes
this is debloated stock http://forum.xda-developers.com/xperia-sp/development/rom-binomical-v1-1-final-t3111555
works great
and this is lbl cm11 http://forum.xda-developers.com/xperia-sp/development/rom-cyanogenomod-11-xperia-sp-t3041391
great aosp rom for lbl device
Click to expand...
Click to collapse
OK, I will do that part tomorrow. I'm a bit tired of all this sh*t.
Thank you for all your help, I do really appreciate it.
fishmong3r said:
OK, I will do that part tomorrow. I'm a bit tired of all this sh*t.
Thank you for all your help, I do really appreciate it.
Click to expand...
Click to collapse
No problem, no need to thank me just hit thanks button, I'm glad I helped you