Database Develop

[Q] Stuck on Htc Logo and can not power off

Hi Everyone;
I unlocked my phone for flashing custom rom. After unlocking i reebooted it and was normal. Then i flashed cwm via htc one toolkit. It was successfull as well. Then i go to cwm and made factory reset + wipe cache + dalvik cache. Then i go to install zip from sd card but i could not find my rom file. Thought, it was deleted while unlocking device. Then decided to reboot phone again to copy rom file into the phone and reboot.
But, when i rebooted phone from cwm, it stuck on HTC Logo( Quietly Brilliant screen). Waited sometime, but nothing happened. Then i tried to power off it and boot into bootloader or recovery. I press and hold power button but it does not respond anyhow. When i am holding power button ,back and home buttons are blinking but nothing happens. Almost five minutes i waited as holding down power button but phone does not power off anyhow. i tried all methods like vol down + power, vol up + power and both volume keys + power. But really nothing happens, just blinking back and home buttons. That's all.
I can not simply power off device. :crying:
I also tried boot device via fastboot commands but it says "waiting for device" means computer does not recognize device.
Guys, i need an urgent help. Please...

just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom

skinsfanbdh said:
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.

Blue_Shine said:
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.
Click to expand...
Click to collapse
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps

Good to hear that i am not the first person That means somehow there is a solution i beleive. Still waiting for battery die. even i had 50 percent battery at the begining but still it holds on I never say again htc battery is bad
I exeprienced that stucking on boot logo several times before with my other htc phones but holding power + vol down/up worked always. This is the first time for me that i faced with power button can not power off device.. Well, ,i hope i wish i can handle out this problem. Definetley with your help.
Regards,

I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:

Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
Did you read the other posts in this thread? The way you do a "battery pull" on this phone is to HOLD the PWR + VOL DOWN button for ~15seconds. Your capactivie buttons will blink, too. On my device, it took exactly 15seconds to reboot. There have been some reports of some phones that get so stuck that you just have to wait until the battery dies and charge it back up.
Alternatively, if the computer is recongizing it, try to adb reboot recovery to try and get into the recovery.

Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader

skinsfanbdh said:
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps
Click to expand...
Click to collapse
hi again. this morning my battery finally out. Then i put my phone to the charger and started it in fastboot mode( that is a good new) Then i left it for 20-30 minutes to charge a little bit for flashing custom rom.Then i went to recovery and started adb sideload. Sideload was succesful and finally came to aroma installer of trickdroid. I chose my installation options and started to flash rom but process was frozen on 10 percent. It was saying unmount system, unmount cahce and both of them has notification as "already unmounted". But installation was not going on. Then again i tried to go back fasboot mode again by press and holding power+vol down but unfortunatelly lights are blinking but nothing happens again. I think i need to wait to battery die again.
Isn't it quite weird? Why power+vol down combination does not work for me anytime? So, do i need to wait for battery die in every frozen? Do you have any ideas or comments ?
Do i need to go back to stock first ?
EDIT : Battery was out again and i tried once more. This time installation (trick droid) was successful but it frozen at the end this time. And unfortunatelly i can not restart (power+vol down) it again again Holy crap, i am really pissed off with this problem.

O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.

Guide me with steps please
Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Hi, I have the same problem now and I let my phone die but when I put it to charge and try to go in bootloader, it's doesn't go and gets stuck at the logo again.
Would you please guide me with the steps how u fixed your phone?

Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Do u fix it,i have same problem.on Zenfone max.after successfully rom installation i reboot my phone thn it stuck on resurrection remix logo,then i go into recovery,and mount the stock image without wiping.then twrp showed that image installation successful.thn i reboot it in recovery but it stuck on asus logo.what can i do right now?

Fix it
skinsfanbdh said:
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader
Click to expand...
Click to collapse
Today i fixed it via asus flash tool.with the right steps it can be flash to stock with no problem

What should I do if I can't even get to the boot screen? I tried holding down the power and volume up buttons, but it just restarts and goes back to the same HTC load screen, what do I do????

[Q] Issue with Note N7000 on jelly bean 4.1

I have a problem with my note and i really don't know what to do. I'm sorry if there is another post about this issue but i've not been able to find anything that matches.
Last night my phone refused to unlock even though i had just used it. I decided to reset the phone by holding down the power button. I tried to turn my phone on this morning but it would not boot up properly. The screen that says "Galaxy Note N7000" appears and will stay for a few seconds; it will either turn black and load the same screen again, or it will quickly show the little android person with the spinning orb in it's belly. It will continue this loop unless i take the battery out. Whilst like this, the back of the phone heats up quite a lot as well. I can enter odin mode by holding the volume down key but i cannot enter recovery mode by holding volume up.
Seriously, is there anything i can do to get my phone to reboot??
Thanks.

if you can get into download mode, try to flash stock rom again. Go here to download stock rom and for how to:
http://forum.xda-developers.com/showthread.php?t=1424997
Edit: make sure you battery is charged more than 50%.
Edit: even before you try all these steps, flash philz kernel (.tar file) from pc odin and then see if you can enter recovery mode, if yes, wipe cache partition and dalvik cache and reboot the device to see if it works.

[A] Soft bricks, blocked recovery, bootloops - RESCUE TIPS

Ok, so there are a lot of threads about soft bricks and bootloops, I have answered in a lot of threads but it seems it needs separate thread to explain how to "revive" your phone from bootloops and soft bricks.
First of all, I don't guarantee that it will work but mostly this tricks do their job.
Tricks were tested and worked on many phones, but I don't take responsibility for hard bricked phones after performing tricks from this thread.
Sometimes you need to repeat process because everything must be done with perfect timing. Also if one method won't work try another.
1. Prepare your phone to press recovery combination and while plugging phone to USB or charger, hold keys and release when samsung logo appear. Do Factory reset in recovery
2. (the best) turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery
(3). Emergency download mode (when phone wib but don't turn on screen) - take off battery for few minutes, after that time hold download combination and insert battery, wait few seconds (so normally it would boot and enter dm), accept terms by pressing volume down, connect USB and flash stock Rom
4. usefull tip - Always have backup created in CWM on phone, you never know when it will be needed. What I do is creating backup every week/two weeks, also I have stock backup. I really recomend to create backup before flashing CM while you are on stock (it will guarantee everything will 100% work if something fails), it helped me a lot of times.
(recovery combination - volume up, volume down, power, home)
(download mode - volume down, home, power / accept terms volume down, decline - volume up)
In 1 and 2 "just in case" you can flash stock Rom, when it will start to reboot after Odin finish flashing, take off battery and insert again (to stop boot process) phone should boot into recovery normally but repeat point 2 to be sure.
Also, what is importiant, ALWAYS have turned on debug mode in your usb settings, first thing you should do after flashing CM, turn on debug mode.
===================================================================================================================================================
When you are switching from CM to stock, after flashing stock you will have almost 100% chance that you will have bootloop on samsung logo. You have to factory reset before first boot. So, after flashing stock, when odin will proceed reboot your phone, unplug phone and take off battery (take off battery cover before flashing, but be careful not to drop battery while flashing via odin, it would be really really bad for your phone, hold phone and battery all the time). After inserting battery back and assemble cover, go to recovery and do factory reset.
Share your thoughts and experience here.

Bump

You should contact a moderator and ask him/her to pin this thread.

help please
my phone cannot go to the recovery mode although i had flash the stock rom
and my phone had a bootloop
may you help me :crying:

yudha wira said:
my phone cannot go to the recovery mode although i had flash the stock rom
and my phone had a bootloop
may you help me :crying:
Click to expand...
Click to collapse
"turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery" learn to read...
this is worked for me

Peky031 said:
"turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery" learn to read...
this is worked for me
Click to expand...
Click to collapse
I had this problem. Reflash CWM. Then "turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery"

Thanx man it worked. Several attemps in 2 days.
Verzonden vanaf mijn GT-S6500D met behulp van Tapatalk now Free

Thank you for this ! The decline download mode agrements , press recovery combination trick worked , I managed to get to recovery ! I flashed stock rom 3 times and tried repartition with pit ...but this is the only thing that worked ! Thank you

Now I have a Idea about a Un-brick:
1. If you want to return (after a Forget a clean data/cache/dalvik) When You can downgrade with .md5 Stock ROM (or Custom)
2. If Recovery Doesn't works... You can only Download Mode (Volume Down + Home + Power) - Remember it's that's not with SIM/SD Card [Maybe that's optional if it forget but I will be recommend.]
3. Flash to Newest "ClockWorldMod"
4. After Restart - That's must be take off battery and Connect USB Cable to SGMII
5. Let's Turn On Recovery Mode with a "Samsung Logo" Before Input Battery [With a Battery it's doesn't does it Start,on Fortunately...]
6. And... Let's to clean data/cache/dalvik... And that's All of "Open source Unbrick"
What Did a get:
+ Downgrade ROM without a Additonal Box (Because that's Open source with a Easy-Root and Not Close-Source as a Self of Old Sony Ericsson Tuning - But I Like a Old Sony Ericsson's Too ... And "Sony" looks from a 2007 about a Modifications and Sony is not a blocked for Android - Fortunately... And for a Today Some users remembers about a Big Seasons Tunings from K310i or K550i [I had a Two phones... That's nice what I discovered about a ROM's Modifications... And Let's praise for Sony that's Not blocked for Androids... Thank you,Sony. ]
+ That's can be again to Upgrade eg. Cyanogenmod
And... A knowledge... Hope that's share a help.

might want to consider adding this
Hi OP, you might want to add this to your thread..
so, early this week, i faced a bad bootloop situation after the software update.. Even with a normal boot (no vol+,home button and power button pressing), my phone will still be stucked at CWM recovery..
Note that my phone was working fine, only the software update caused my phone to stuck in the CWM bootloop..
So, what i did was, i updated my CWM 4.0.8.2 [ my bad, cause when i rooting my phone initially last few weeks, and i've been reading outdated threads].. So, i updated my CWM 4.0.8.2 to CWM 6.x through CWM recovery..
Then, after it rebooted, i go to download mode, connect my phone through ODIN and flashed stock rom.
Now, it is working fine like new..

[Q] stuck in boot loop P1000

Good day everyone...
I have one Galaxy Tab P1000 here stuck in boot loop... I really don't know what happened before it got stuck into this loop but it was working fine, it got battery empty and when done charging, it got stuck in a boot loop already...
I have tried to go into stock recovery but the sad thing is that I can navigate through the menu but I can't press the OK button (the power button) to select anything to do. So I searched through the forum and tried a few things, the most notable would be trying to go back to safe stock in the Overcome thread, still it is in boot loop. I tried to go further by installing the overcome kernel... skipping the part where I'm supposed to go to the settings (because basically I cant go to the settings menu).... still I was able to install the kernel and even the Overcome ROM, sadly even with the MOD ROM its still in the boot loop , one thing to note though, when I go into the recovery mode in Overcome ROM I can press the OK button (power button), I mean it responds now and I can basically navigate through the recovery menu and select things from there... but It is still stuck in a boot loop
need some advice

Stock 3e OK button is actually the capacitive HOME button.
Your tab was responding the same in stock as in overcome.
Can't help you about the looping though.
Have you tired restocking again with pit file?
Sent from my GT-P1000 using xda app-developers app

tried the home button too but still no avail it wasnt responsive... i have made all the reflashing with the specific pit file needed it wont get out of the loop

cike said:
it got battery empty and when done charging, it got stuck in a boot loop already...
when I go into the recovery mode in Overcome ROM I can press the OK button (power button), I mean it responds now and I can basically navigate through the recovery menu and select things from there... but It is still stuck in a boot loop
need some advice
Click to expand...
Click to collapse
Try: - (good luck)
choice_A
steps
in CWM, wipe factory reset, cache, dalvik, everything that you can find.
flash kernel CWM6.0.4.5 (from download mode)
install a new rom.
choice_B
flash kernel TWRP2.3.5 (I think or some version similar) (from download mode)
it has some extra WIPE to delete BOOT, RECOVERY, SYSTEM, etc. WIPE them all. If you can manage this, it doesn't even LOOP.
install a new rom.
problem.
There is a TWRP that can't boot into recovery by VOL+_Power. Only can get in from home screen advanced reboot.
may be some other older TWRP can enter recovery, try to find one. I'm not so sure my self.
choice_C
if somehow you managed to boot into home screen, install apk (bootloader check) by chainfire (I think), I had previously experience some dev uses locked bootloader, which doesn't allow you to flash new rom properly.
btw do you know the 8 seconds power button to get a real shutdown?

thanks cx5 im gonna do try all the choices... real reset meaning a powercycle (8 sec hold of power button)

Good luck,
New advances, TWRP solved, now able to boot from VOL_UP+power. See http://forum.xda-developers.com/showpost.php?p=48418252&postcount=365
Suggest to use @terenceng 's rom too, it has one of the highest free ram 487MB.
Another tip, if you hold power button forever it will boot loop forever.
i.e.
from shutdown
4 seconds will boot up (may be it's 3, anyway)
another 8 seconds will shutdown. (may be it's 7, anyway)
total is 12 seconds.
When I didn't have enough experience in counting the time accurately, I overshoot the 8 seconds shutdown to around 12 seconds and it boots up, and I think it is looping. But in fact it is not. I accidentally made it boot up. Hope you don't fall into this condition.
GT-P1000 are fantastic that it can surely shutdown, as long as the 8 sec rule is properly implemented. no more no less.
Then you can always go to download mode. overcome restock has always save my day. Good luck.
cike said:
thanks cx5 im gonna do try all the choices... real reset meaning a powercycle (8 sec hold of power button)
Click to expand...
Click to collapse
---------- Post added at 11:49 AM ---------- Previous post was at 11:46 AM ----------
I forgot to say, locked bootloaders will STOP overcome restock. It will not allow it. Must use bootloader UNLOCK apk. Happened to me so many times in the past.
cx5 said:
Try: - (good luck)
choice_C
if somehow you managed to boot into home screen, install apk (bootloader check) by chainfire (I think), I had previously experience some dev uses locked bootloader, which doesn't allow you to flash new rom properly.
Click to expand...
Click to collapse

thank you for the help guys but the problem was actually the motherboard

Bricked Nexus 6 (Not your typical thread)

So first things first:
I am not a noob, I have been flashing phones for years
The phone has an UNLOCKED bootloader
I know what a bootloader/recovery are etc
So last night I upgraded my phone to 6.0.1. I then decided to root it and get a kernel on for color control. So I download one of the new kernels (Elementalx) for 6.0.1 and the systemless root that he recommended in his post. I flash both files and boot the phone, the phone bootloops twice after the password to boot screen and then it works fine. I install a few things adjust a few things (nothing pertaining to root) and then before I jump into the shower I reboot it. I look at it after a few minutes and it is sitting at the google screen with the padlock, no worries it has happened before so I reboot it only to be met with this same screen. Over and over it just halts here. I do the button trick to get into the bootloader, no dice. No button combination can get me past this screen.
I then go over to my PC and try it out and see if I am getting a Q_BULK issue (I had it happen to my Galaxy Nexus before) and the PC doesn't even acknowledge it, so now I am getting a little worried. I cannot power off the device normally, it just reboots back to here. I can manage a trick with the power cable and some quick button presses to enter the "charging" mode and from there it appears to shut down. Upon boot though it comes right back to this halt. :-/
So, does anyone have ANY experience with this before I contact Motorola? I really don't want to because I have frame swapped and don't look kindly on the process of undoing it for a replacement, but if it must be then it must be. Below is a TLR
Phone boots to Google/padlock screen
CANNOT access the bootloader/recovery through normal means
PC does not recognize it (I did prior in both fastboot and recovery so the drivers are all installed)
the phone does NOT appear to be in Q_BULK
the phone will not shut down, it just boots back to here
It "was" running ElementalX and the systemless root (both are the newest) for 6.0.1
-Current status, sitting on this screen waiting to die... but it has an almost full charge

OK, first off... YOU ARE A NEWBIE.
Turn off the phone and boot to bootloader and use that to load your custom recovery and restore your working backup.
Failing that, fastboot flash the stock image from bootloader mode.
What are you hoping to accomplish by draining your battery completely, this can only make matters worse.

@scryan you are a funny man?

you didnt say anything about trying to get into recovery.. i assume you tried getting unto your recovery?

Hold power button, up and down button all at the same time. If you are on stock recovery wipe user data and cache. See if you can boot into the bootloader afterwards. That's unusual you cannot get into stock or custom (if you have it) recovery.

So you're main problem here is that you can't get into your bootloader or recovery right now? Hmm..... that can't be good. My best guess would be to keep trying to get it into your bootloader, just keep on holding volume down and power for a long time, hopefully if you can get into either bootloader or recovery you can fastboot flash a clean stock image, or restore a nandroid backup (assuming you have one) with TWRP. My best guess though.

Briefly, your device powers on, so there's sign of life. It is either your cable, pc' usb port or the usb socket of the phone is at fault. Did you try with another usb cable at another usb port in the pc ?

Let the phone power down completely. And when it dies, connect it to a charger while briefly holding the vol down button to get into the bootloader. It might take a while since the phone doesn't have any juice but this trick might just work.

If already no warranty, so dissasembly the deive, re-attack your battery