Database Develop

Case for Unit without Keyboard

Anyone know of a case that doesn't hold the keyboard? And, hence no magnets? Just want to carry the main device by itself in the smallest possible volume.
Thanks,
Krip

i search for something similar (didn't wanna start a new thread).
i'm looking for a case that can hold the device itself and the keyboard in two different pockets within the same case (can be a totalyl closed case, where you have to pull out the athena like the universal pda case from pielframa, but with two pockets). plus it has to have a very solid belt clip and should be as small as possible.

Skins or case just for the screen
Well im looking for a Skin similar to whats available for Ipods and various other phones out there.
Just want it for the Screen and not the keyboard. So at least the screens protected whilst in my pocket.
Any help would be appreciated as this is the only niggle i have at the moment!
Cheers

Silicon Cases for Athena
tomchap said:
Well im looking for a Skin similar to whats available for Ipods and various other phones out there.
Just want it for the Screen and not the keyboard. So at least the screens protected whilst in my pocket.
Any help would be appreciated as this is the only niggle i have at the moment!
Cheers
Click to expand...
Click to collapse
If I understand you right tomchap, I'm looking for the same thing...a silicon skin for the main unit (preferably with a hard clear plastic cover for the screen). That would make the Athena slim enough to fit in most of my pockets and stop and serious scratches or damage to the device.
Have been looking too....something like this but in better quality in various colours.
http://img.alibaba.com/photo/11762671/Silicone_Skin_Case_For_Sidekick_3.jpg

Thats the one, Skins type case
Yep thats def what im looking for, like these
http://img.alibaba.com/photo/11609075/Gen_Skin_Case_For_Apple_Ipod_NANO.jpg
A clear see through plastic cover / skin would be ideal.
Ive looked everywhere, even the usually most reliable eBay and theres hardly anything available for the Ameo.
Loads of screen protectors but thats about it.
You would think someone out there would make one?

Rucksack case for Athena without keyboard
Am also looking for a case, but a reasonably weatherproof one that I can attach to my rucksack shoulder strap to hold the Athena when I am outdoors using it for digital mapping. I have the perfect one for my Hermes but am going to test the Athena to try the larger screen.

anilk said:
Anyone know of a case that doesn't hold the keyboard? And, hence no magnets? Just want to carry the main device by itself in the smallest possible volume.
Thanks,
Krip
Click to expand...
Click to collapse
Stumbled across this...
http://www.pielframa.net/prodi.asp?id=722
The DIMENSIONS (Height x Width x Thickness): 178x115x20 mm are right for Ameo that is 133.5x98x16 mm
Gboye

Kurvenal said:
Am also looking for a case, but a reasonably weatherproof one that I can attach to my rucksack shoulder strap to hold the Athena when I am outdoors using it for digital mapping. I have the perfect one for my Hermes but am going to test the Athena to try the larger screen.
Click to expand...
Click to collapse
U1000 size, 9.5 x 2.2 x 13.4 cm
D-Pods 50, size (Interior): 8.5 x 5.5 x 14 cm, stretch fabric, snug fit, hard to take out as the width is a bit tight (stretched), I like this coz the material (got protection), http://www.lowepro.com/Products/Camera_Pouches/designed_digital/D-Pods_50.aspx
SlipLock™ Pouch 20, size (Interior): 9 x 4.5 x 14 cm, this fit nicely, easy to take out, but less protection, http://www.lowepro.com/Products/Accessories/sliplock_cases/SlipLockTM_Pouch_20.aspx

johnnykok said:
U1000 size, 9.5 x 2.2 x 13.4 cm
D-Pods 50, size (Interior): 8.5 x 5.5 x 14 cm, stretch fabric, snug fit, hard to take out as the width is a bit tight (stretched), I like this coz the material (got protection), http://www.lowepro.com/Products/Camera_Pouches/designed_digital/D-Pods_50.aspx
SlipLock™ Pouch 20, size (Interior): 9 x 4.5 x 14 cm, this fit nicely, easy to take out, but less protection, http://www.lowepro.com/Products/Accessories/sliplock_cases/SlipLockTM_Pouch_20.aspx
Click to expand...
Click to collapse
Both excellent suggestions, thanks very much. I ended up with the Pouch 20 because I like the fit better and it is thinner, therefore easier to carry on my rucksack. Took it out for a test ride yesterday. Both case and Athena digital mapping worked great.

Kurvenal said:
Both excellent suggestions, thanks very much. I ended up with the Pouch 20 because I like the fit better and it is thinner, therefore easier to carry on my rucksack. Took it out for a test ride yesterday. Both case and Athena digital mapping worked great.
Click to expand...
Click to collapse
Can you post some pictures ?

case 20 link
If its the case I've got then the 'pouch 20' is an all in one case designed for digital cameras and similar size units. I bought mine online from jessops here in the United Kingdom.
If I am wrong and this is NOT the case 20 talked about then forgive & sorry.
jessops case 20 page can be found here
My pda is NOT a u1000 but similar. Just stumbled on this thread. This pouch 20 is smaller than u1000 so Ive just been told so sorry for the error.Must be a different one.

nicholasendean said:
If its the case I've got then the 'pouch 20' is an all in one case designed for digital cameras and similar size units. I bought mine online from jessops here in the United Kingdom.
If I am wrong and this is NOT the case 20 talked about then forgive & sorry.
jessops case 20 page can be found here
Click to expand...
Click to collapse
How did you managed to put the U1000 inside ?
U1000 size, 9.5 x 2.2 x 13.4 cm
Rezo 20 size, 7.5 x 3 x 10.5 cm
BTW, i saw something similar, but since it is 'zipper', it is quite hard to take out/in without scratching the unit.

Found -HERE - a silicone skin case for the HTC Athena (Dopod U1000, HTC X7500, etc) comming soon.....

XzaniX said:
Found -HERE - a silicone skin case for the HTC Athena (Dopod U1000, HTC X7500, etc) comming soon.....
Click to expand...
Click to collapse
Nice! Thanks for the post. I can't wait to see if it will be designed to allow you to continue to connect the keyboard to it. An option of sorts. The only negative I can think of is that it'll stick to your pocket when you try to put it in there and take it out. Same thing happens to my iAudio MP3 player with its silicone case. Maybe they'll have a belt clip for it!!!

Pouch Bag
Some of these look interesting
http://www.warehouseexpress.com/?/photo/Kata/kata_photo/cam_pouch.html

Anyone tried a Lowepro D-Res case for size?
If so, which one fits best?

nicholasendean said:
If its the case I've got then the 'pouch 20' is an all in one case designed for digital cameras and similar size units. I bought mine online from jessops here in the United Kingdom.
If I am wrong and this is NOT the case 20 talked about then forgive & sorry.
jessops case 20 page can be found here
My pda is NOT a u1000 but similar. Just stumbled on this thread. This pouch 20 is smaller than u1000 so Ive just been told so sorry for the error.Must be a different one.
Click to expand...
Click to collapse
Here is the one I meant, same as the one in the link above from Johnnykok:
http://www.jessops.com/Products/ProductDetail.aspx?SkuId=22844

I have now found the Lowepro MX 20 case to be the best solution for hooking to a rucksack while riding (see http://www.parkcameras.com/ProductD...roogle/productID/827/groupID/5/categoryID/20) and available in many shops on Tottenham Court Rd. I have added some waterproofing but not yet tested it in very wet weather since the weather has been pretty good these past weeks. I used the Pouch 20 in serious wet weather without waterproofing and found that it did not stay dry inside. I have decided that in very wet weather I will transfer the Athena to a small WXtex waterproof bag I found in an outdoor store.

So did anyone locate some sort of casing just for the device.Out of curiousity

Case For Just Your Unit
Although i am and have made a change for a new mobile(I still have 1 more X7501 that im keeping)I stumbled across this that i thought i would share with the community:
http://www.boxwave.com/products/dlcase/htc-x7500-designio-leather-case_2722.htm
Carry just your unit and not the keyboard whilst you are out doing business!
Hope this helps those whom are looking for a case to take with them when they are doing business.
Regards

Alternate 22mm straps?

Anyone replace out your strap/band yet? How does it look?
Sent from my Nexus 9 using Forum Fiend v1.3.3.

Yep, hated the stock band. I purchased this one... http://www.amazon.com/gp/product/B001EYVBJA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Super quick review... Matches the watch like it was built for it. I've had this brand before and it held up well which isn't surprising, it feels like a piece of decent quality. Quicker to take on and off and less likely to drop your watch which is true all of straps of this type versus a buckle. Regrets = zero.

Sweet! I just ordered one too....
Sent from my SM-G925T using XDA Free mobile app

krabman said:
Yep, hated the stock band. I purchased this one... http://www.amazon.com/gp/product/B001EYVBJA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Super quick review... Matches the watch like it was built for it. I've had this brand before and it held up well which isn't surprising, it feels like a piece of decent quality. Quicker to take on and off and less likely to drop your watch which is true all of straps of this type versus a buckle. Regrets = zero.
Click to expand...
Click to collapse
I wonder if they make that one in the rose gold that matches the gold Urbane. I will have to look into that...

I purchased these 2:
DASSARI Concord Black w/ White Stitching Croc Leather watch Band for BREITLING 22/20 22mm https://www.amazon.com/dp/B00OC77BR2/ref=cm_sw_r_awd_Ctssvb0JQAJAR
Ritche 22mm Stainless Steel Bracelet Watch Band Strap Curved End Solid Links Color Silver https://www.amazon.com/dp/B00DKYC93E/ref=cm_sw_r_awd_fvssvb1V69QNZ

TriadX1 said:
I wonder if they make that one in the rose gold that matches the gold Urbane. I will have to look into that...
Click to expand...
Click to collapse
Its much easier to match up the stainless than various gold, rose, graphite, ti, etc. bands/straps/bracelets. I would consider taking it to a larger shop where they have a good inventory and try to match it up.

http://www.amazon.com/gp/product/B005K2R4IO/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 This was the wand band I ordered when I bought the watch. It matches the watch perfectly. I attached some pictures below.

I am curious about how you charge the watch with a metal band. Could someone please post a picture of your watch on the stock charger to show how you do it?

just ordered this
Hadley Roma 18-22mm Squeeze End Link Men's Deployant Stainless Metal Watch Band
http://www.ebay.com/itm/371296668278

JimSmith94 said:
I am curious about how you charge the watch with a metal band. Could someone please post a picture of your watch on the stock charger to show how you do it?
Click to expand...
Click to collapse
The magnet is strong enough to hold the charger to the phone in most any position including the watch laying on its side. You can do it however you want.

Got the SUPER engineer Type II based on reviews
Amazon item B00CSE7IJ2
I know it seems like it's a bit pricey compared to others like the Hadley Roma but I'm super impressed with the quality. It's very heavy and the edges are not rounded over like it was mass produced. The links that can be removed for sizing have screws and they are super easy to adjust. I also like the buttons on the flip part of the band closure.
$72 bucks is still a hell of a lot cheaper than those rip off apple metal bands. Can't imagine them being any higher quality than this.
Important note: the 2.5mm fat boy pins that come with this larger band do not fit into the body of the LG Urbane because the lugs or tips are 0.8mm instead of the tiny ones that came on the existing leather strap band. For now, I'm using the pins that came with the watch, which are standard 22mm, but with smaller lugs. I could not find another vendor who made a 2.5mm pin with smaller tips since these larger bands are designed to go on Seiko's or diving watches.
Update: My plan is to put the fat boy pins that came with the watch in my dremel and use a micro diamond file ($13 on amazon) to reduce the lug down to a diameter that works in the Urbane. I will post an update if it works out and post links to the files I bought. Don't see why it wouldn't work and I don't think there is any other choice if you want to utilize the fat boy pins...which I do.
Stay tuned...pics coming.
Peter

ptchan5, could you explain in greater detail the Fatboy 2.5mm lug and LGs .8mm tips?
Keep us posted in the project

Anyone here thinking of going with a dark brown aligator band with the silver watch?
I would love to here what you guys think... or am I the only one not going with the metal braclet.

why_999 said:
Anyone here thinking of going with a dark brown aligator band with the silver watch?
I would love to here what you guys think... or am I the only one not going with the metal braclet.
Click to expand...
Click to collapse
I like this also.
Metal bands are not my thing.

Fat boy 22mm Spring Pins MOD
This is a follow-up to my previous post.
I used a dremel to reduce the diameter of the lugs on the 2.5mm fat boy spring pins that come with the heavy diver watch metal bands. I searched high and low and I believe all the thick spring pins come with 0.8-1.0mm lugs at the tips which are too big for the body of the LG Urbane. Turns out the pins that come with the Urbane are actually smaller than the holes in the watch body, but the fat boy pins are just a wee bit too large.
This MOD took about 5-8 minutes to do and worked perfectly! Now you can use the spring pins that were supposed to go with the larger metal band.
All you need to do is insert the spring pin into the dremel about half way and turn the dremel on to low setting. I bought the cheapest set of micro files I could find on Amazon Prime for $14 bucks and I ended up only using a single file out of the set. The one I used was the 90 degree square one so I could easily just hold it up to the lug for a minute or two and moved it forward and backward while watching the lug leave metal residue on the file. The 316L stainless steel pins are not soft metal! So it's nearly impossible to mess this one up. Once I got the pins to be reduced down in size visually I tested them in the watch before proceeding to do the rest of the pin ends.
Again, don't waste your time searching ebay or Amazon for 2.5mm pins with smaller lug pins. They don't exist. Besides by the time you buy them and find out they don't work you could have owned a nice set of micro files and been done with the MOD on the original pins that shipped with the watch band.
Very happy with the results. Ping me if none of this makes sense. Enjoy!
** Apparently can't post the pics, so ping me and I'll email them to you; maybe someone else can post them for me **

I think I'm going to go with this one
http://www.amazon.com/gp/aw/d/B00RF...olid=3U4N5O4C10O74&coliid=I34CDQ7SASFQ76&vs=1

graffixnyc said:
I think I'm going to go with this one
http://www.amazon.com/gp/aw/d/B00RF...olid=3U4N5O4C10O74&coliid=I34CDQ7SASFQ76&vs=1
Click to expand...
Click to collapse
That one has the cutout for the Moto 360. You don't need that for the Urbane.

JimSmith94 said:
That one has the cutout for the Moto 360. You don't need that for the Urbane.
Click to expand...
Click to collapse
That's not a factor for me. I'm getting that one because I liked the design best. I'm sure it would fit the urbane just fine.

I'm not much of a watch geek and have never paid too much attention to what strap I'm using. I used a NATO strap with my Pebble and the original straps with both my Pebble Steel and LG G Watch R.
However, I keep reading how uncomfortable the Urbane's strap is and it got me thinking: could I use the one in the Watch R with the Urbane? I find that one pretty comfortable.

Gorgeous!
Finally received my new metal bracelet and it beats anything I have ever seen, it really makes my watch look fair superior than even an apple watch

[Case/USB] Adopted Replica vs Original

Two fast questions, anyone tried adopted replica vs original adopted case for Nexus 5X?
I found this. What you guys think about it?
It's safe use original xiaomi usb-type c converter? Don't know if I can put that link or not.

tpati said:
Two fast questions, anyone tried adopted replica vs original adopted case for Nexus 5X?
I found this. What you guys think about it?
It's safe use original xiaomi usb-type c converter? Don't know if I can put that link or not.
Click to expand...
Click to collapse
Did you find anything on the original vs replica case?

I don't know about the alternative case, but the original Adopted in blue was horrible. Within a few months, it had become discolored and darker from fingerprints. I tried everything from soaking it in bleach to scrubbing it with Ajax. Nothing removed the marks. The biggest contrast was when I took the case off and saw the original bright blue on the inside. Unfortunately, I threw it away already and don't have pictures of how bad it was. I'm upset that I paid $20 for this case.
I got this case last week, and it's been great. Prime shipping for only $8.

pkadavid said:
I don't know about the alternative case, but the original Adopted in blue was horrible. Within a few months, it had become discolored and darker from fingerprints. I tried everything from soaking it in bleach to scrubbing it with Ajax. Nothing removed the marks. The biggest contrast was when I took the case off and saw the original bright blue on the inside. Unfortunately, I threw it away already and don't have pictures of how bad it was. I'm upset that I paid $20 for this case.
I got this case last week, and it's been great. Prime shipping for only $8.
Click to expand...
Click to collapse
Google's price is $35. How come did you buy it at $20? Are you sure it's not fake?
BTW, I'm currently using Spigen's ultra hybrid case. But a large portion near camera and fingerprint sensor is open in it so I feel insecure to get scratched from debris on that area. Otherwise it's fine. More to mention that, due to its small legs on four corners it doesn't touch the camera when left on flat surface.

S.Nahid said:
Google's price is $35. How come did you buy it at $20? Are you sure it's not fake?
Click to expand...
Click to collapse
My bad. I failed to notice the microfiber part. I was talking about this one, but that's not comparable to what the OP was asking about. Sorry for the confusion.

i bought the $35 case listed on google from ebay for $11.. I got it after 10 days and it looks great i like it.. I dont have original one to compare but i like the feel of the case..

I've the replica of the Adopted microfiber case, actually I'm pretty satisfied about it. My overall impression is that it's less beautiful than the original one from a lot of details like the plastic around the flash and the color and shape of the writings... It fits very well with my Spigen tempered glass btw

Lenovo Real Pen Ink Refils

Purchasing the ink refils directly from Lenovo seems rather expensive at 3 refils for EUR10. After some quick searching I came accross these: http://autopointinc.com/ministar-ink-refill.html which appear to be the same refils from the original manufacturer at 5 refils for $5 and a choice of colours.
EDIT: I'll add that I have purchased and tested them to ensure they do in fact work.

Hitsuji666 said:
Purchasing the ink refils directly from Lenovo seems rather expensive at 3 refils for EUR10. After some quick searching I came accross these: which appear to be the same refils from the original manufacturer at 5 refils for $5 and a choice of colours.
EDIT: I'll add that I have purchased and tested them to ensure they do in fact work.
Click to expand...
Click to collapse
Thanks for letting us know! I read that you can use any refill with the pen, and the digitizer will work - I'm looking for rollerballs, and I'll report back if I find any.

Anyone found a cheaper compatible stylus
Sent from my Pixel XL using Tapatalk

The Wacom Bamboo Spark uses the same tech AFAIK. Sol I would assume the stylus pen for that is compatible.
https://us-store.wacom.com/Catalog/Accessories/Pens/Bamboo-Spark-Pen-S02

Hitsuji666 said:
Purchasing the ink refils directly from Lenovo seems rather expensive at 3 refils for EUR10. After some quick searching I came accross these: http://autopointinc.com/ministar-ink-refill.html which appear to be the same refils from the original manufacturer at 5 refils for $5 and a choice of colours.
EDIT: I'll add that I have purchased and tested them to ensure they do in fact work.
Click to expand...
Click to collapse
I bought a pack of 100 for less than $9 on AliExpress (http://s.aliexpress.com/v6j2a6fa) . Sadly, they only seem to have blue or black. The refill works perfectly. As with all things AliExpress, you'll have a bit of wait until they arrive. Shipping time was 2 weeks to Germany.

Apparently 67mm is a pretty standard multipen refill size (these are 68mm), and refills that look as if they might work can be found at http://www.cultpens.com/c/q/explore/product-type/refills/d1-multipen-refills and https://www.amazon.com/s/ref=nb_sb_noss_2?url=node=1069832&field-keywords=d1
Edit-Yup, confirmed with a mini-pen I've got that uses a D1. We wanna look for D1 refills. Jet pens also has lots of options, including Gel. http://www.jetpens.com/search?q=d1
I've ordered some purple ones. http://www.jetpens.com/Monteverde-Soft-Roll-Ballpoint-Pen-Refill-D1-0.7-mm-Purple-Pack-of-4/pd/7802
Edited Edit-The D1 refill I have doesn't work when writing on the book pad. It picks up every gesture of the pen, not just what you actually write. OP, did you have this problem with your non-lenovo refills?

Not the OP, but my refills (exactly 67 mm) work when writing on the book pad. Could the extra mm be causing the issue?

I bought some standard D1 refills from Amazon and they worked fine with the pen and pad. A lot cheaper than the Lenovo refills and are also readily available from high street stores.
The Samsung Note 4 stylus also works with the digitiser pad, the button even works on compatible apps.

west0ne said:
The Samsung Note 4 stylus also works with the digitiser pad, the button even works on compatible apps.
Click to expand...
Click to collapse
I hadn't even *THOUGHT* about trying my old Note styluses on the yogabook! Good info!

heldc said:
Edited Edit-The D1 refill I have doesn't work when writing on the book pad. It picks up every gesture of the pen, not just what you actually write. OP, did you have this problem with your non-lenovo refills?
Click to expand...
Click to collapse
I've found the same problem. I ordered one of these Uni Jetstream cartridges, and it ceases to detect pen distance and pressure when you put one of these in. It acts the same as if there were no nib in it -- it will start tracking the pen and 'writing' even when you are off the paper.
I'm guessing the EMR system doesn't work with the conductivity of that specific refill, or something.
I'm on a quest to find a refill that writes better than the original nibs. Has anyone found any gel refills that work with the digitiser?

Firstly, apologies, I can't post URLs as I don't have enough posts.
I found this thread after trying some cheap refills off amazon - and like others, found they didn't work properly on the digitizer with the same problem of light lines appearing even when the stylus was not in contact with the digitizer.
I came to the conclusion that the metal composition of the refill was the problem - if you hold something metal (in my case a small nail) next to the tip of a stylus with a genuine refill, then it messes up the digitizer sensitivity. This would make sense as different metals will interact with electromagnetic fields differently and the EM of EMR stands for ElectroMagnetic.
Checking out refills for the Bamboo Spark pen mentioned previously I found them for sale at Misco dot uk.
The interesting line at the end is "The unique brass casing is essential to the use of Spark, as it helps the communication between the pen and the sensor board for optimal performance." which backs up my thinking.
I have found a supplier in Switzerland (Starminen dot ch) and have ordered some. I will update this thread when they arrive.
EDIT: Forgot to mention, the refills I ordered are only €1.19 for 5 plus postage - came to €5 for 2 packs plus postage to the UK.

McShed said:
Firstly, apologies, I can't post URLs as I don't have enough posts.
Click to expand...
Click to collapse
I think this is the URL you probably meant to post. http://www.starminen.ch/product_info.php?products_id=26

You are 100% correct. Thank you.

McShed said:
You are 100% correct. Thank you.
Click to expand...
Click to collapse
Refills arrived quickly (about 4 days).
They work perfectly with the digitizer.

west0ne said:
I bought some standard D1 refills from Amazon and they worked fine with the pen and pad. A lot cheaper than the Lenovo refills and are also readily available from high street stores.
.
Click to expand...
Click to collapse
Do you have a link to the store front?

hajkan said:
Do you have a link to the store front?
Click to expand...
Click to collapse
These are the refills I bought, the price has increased since I bought them. I got the same refills from a local Rymans for even less (I'm in the UK), again they were just a generic D1 refill.
https://www.amazon.co.uk/gp/product/B002GYVTCG/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Tested ok with Lenovo Pen
coredump said:
I bought a pack of 100 for less than $9 on AliExpress . Sadly, they only seem to have blue or black. The refill works perfectly. As with all things AliExpress, you'll have a bit of wait until they arrive. Shipping time was 2 weeks to Germany.
Click to expand...
Click to collapse
Thanks coredump I took the plunge and bough the pack of 100 in black as well for $8.86 from Ali Express including shipping to the UK. Arrived in about 15 days and they work perfectly with the Yoga Book transcriber.
A little bit inky compare to the Lenovo ones i.e. when writing a few sentences there may be a tiny bit of extra ink so need to be careful not to drag my hand through it and smudge it. However for the price I'm delighted. I figure all things being equal that those Pen refills should see me through a few happy years with the yoga book.

Reserved

THANK YOU!
coredump said:
I bought a pack of 100 for less than $9 on AliExpress (http://s.aliexpress.com/v6j2a6fa) . Sadly, they only seem to have blue or black. The refill works perfectly. As with all things AliExpress, you'll have a bit of wait until they arrive. Shipping time was 2 weeks to Germany.
Click to expand...
Click to collapse
YOU'RE AMAZING!!! I purchased that and I am going away for the winter holidays, however, it will be here when I come back and I will update you on how they fit.
ALSO, what do you think of homemade or alternative pad paper? Thank you!

nasko7 said:
YOU'RE AMAZING!!! I purchased that and I am going away for the winter holidays, however, it will be here when I come back and I will update you on how they fit.
ALSO, what do you think of homemade or alternative pad paper? Thank you!
Click to expand...
Click to collapse
Sorry I'm so late in getting back to you. I hope you like the refills. As for paper, I ended up making my own in Inkscape and cutting them to size with a paper cutter. This might not be an option if you don't have a paper cutter at hand. I would be happy to provide you with the svg files or convert them to pdf if you want to give it a try.

Yoga paper replacement

One simple trick I had contemplated of using normal paper: if 15 euros for 25 sheets is to much, try using the A5 postit notes. Just stick one on the 'keyboard', write on it and throw it away.
it won't shift place..

musicmannetje said:
One simple trick I had contemplated of using normal paper: if 15 euros for 25 sheets is to much, try using the A5 postit notes. Just stick one on the 'keyboard', write on it and throw it away.
it won't shift place..
Click to expand...
Click to collapse
when it came to the papers i first tried to find the original to buy but it costs way to much so i ended up buying just normal plain standar bundles of A5 size paper like theese and then i just used a normal paper punch to mke holes at the top to fit the pins on the pad.
https://www.skovdekontorscenter.se/...de-block/limmat-block-bantex-a5-linjerat.html
(page is in Swedish but basically 5 pads with 100 pages each for aprox 1 Euro plus freight or just go down to any office supply shops and buy dirt cheap of the counter)