Related
Hi guys, i searched lot, but did not find any proper solution for getting flashable files of smart flash from kdz..
Plz help guys..
Obviously you haven`t searched enough .
I think that you are looking for LGExtract 0.2.1
Tool is in it`s beginning, but from reading I think that it can extract smartflash files from kdz and it is tested on p990 (I haven`t tested it).
k, i tried that, now i got 13 files.
some are img, some fls etc.
but we need only 2 files for flashing with smartflash tool. bin and fls.
how to get them ?
As I said, I haven`t tried to do this, hence I can`t help you. You will must to read and ask for support in original thread, where the author of the tool is present.
If you are trying to flash kdz and since LG have changed their politics, try to read this thread too... http://forum.xda-developers.com/showthread.php?t=1473781
Hi all,
first, thank you Memhis, the tool is excellent. It works under Linux too in Wine environment.
But I have some observations and some questions
- first decrypt/decompile KDZ file only extract a CAB file - this CAB file can be extracted by cabextract utility
- after CAB file extraction, there is WDB file and machine specific DLL - this DLL file must be used for extraction of WDB, I try the newer one without success
- after performing extraction of WDB using DLL there are number of files which can be useful
AENEAS_FW.fls, psi.fls, R375_SIC.fls, slb.fls - these files are the baseband and can be flashed using smart flash tool - it must be flashed all, not only some
#_Split_Data.img - after joining this file to one, it contains Linux filesystem (now EXT3) with all data of /system partition and you can get lge-ril.so from this
The remaining files I don't identify and only speculate what is it
ext3_flashboot.img - this filesystem is used to boot for flashing???
fastboot.bin - ???
recovery.img - recovery partition - this images is used to replace ClockWorkMod I think
Once again, many thanks. I was searching for this similar tool about six moths ago.
can you tel me,how do you extract the split_data.img??
at this point i have no idea what i must do and find nothing about it.
cojo11 said:
can you tel me,how do you extract the split_data.img??
at this point i have no idea what i must do and find nothing about it.
Click to expand...
Click to collapse
+1
........
There is nothing to "extract" from split_data.img. It is a true EXT3 Linux filesystem. You have to use a Linux box or something to allow mount an Linux image to Windows environment. I can only point you to http://www.ext2fsd.com/ site which is free good ext2/3/4 filesystem driver, but I don't know, if it is usable - it can mount a Linux partition under Windows but don't know it can mount a image file as disk. Hope so.
Thanks for the information, but I can't extract Split_Data.img (it's the joined file of 4 .img files).
How can I extract this .img in Linux (virtual machine)?
Flix123 said:
Thanks for the information, but I can't extract Split_Data.img (it's the joined file of 4 .img files).
How can I extract this .img in Linux (virtual machine)?
Click to expand...
Click to collapse
You have to mount it, like it is a whole filesystem. Google it to find out how to mount img file. Once done, you'll open it like a hard drive.
Edit: Forget my question, it works now!
My last question: Is the file "ext3_flashboot" the same as the boot.img files in CWM roms?
OK, I managed to extract the kdz file and I made a rebuild of V20c without flashing the kdz, just with extracting!
I'll upload it in a few minutes!
For those who wants to extract KDZ I prepare a little manual...
Keltek said:
For those who wants to extract KDZ I prepare a little manual...
Click to expand...
Click to collapse
Hi Keltek, thanks for the manual. but i am getting some error, any ideas? I'm using Win 7 32-Bit. This is the error:
C:\>LGExtract -kdz V20F_00.kdz
Extracting:
KDZ: V20F_00.kdz
Failed to create cab file.
Error code: 00000005
Message: Access is denied.
Failed to extract file.
Please report this error with this file.
thanks
NEVER MIND: cmd.exe should "Run as Administrator", it works now.
The last question I have is how to join the 4 extracted baseband files to one file?
Does that work with copy /b command?
What i got from flashing basebands is that youre supposed to flash them one by one from largest to smallest file. so basically what you should be doing to "compress" the procedure is you unpack those 4 files, put the largest one in place and copy the others onto it, replacing duplicates. Then repackage what you merged, and try that, cant think of anything more logical than that.
That sounds logical, but I don't know how to extract the files.
But it's not very important, because it isn't a problem to flash 4 files instead of one.
Please extract Bb from v20h rohan
Sent from my LG-P990 using Tapatalk
If you give me the link to the kdz, I will extract the baseband for you.
spica1234 said:
Please extract Bb from v20h rohan
Click to expand...
Click to collapse
You should specify from which ROM file, coz there are many version with same identification but different content - I don't understand why LG do this - the V20q for Czech Republic is not the same as V20q for Italy...
I take a look at V20h and it contain 1035.21_20110725 BaseBand.
Hello,
I search to unpack the boot.img to change files but impossible, I tested all, no program can unpack ... could you pleased help me ?
Thank you in advance.
The RAZR I one? Look in the development section. It will extract it very easy.
Sent from my XT890 using xda app-developers app
I don't find thé hex dump tool ans didn't understand the tuto..
Search in the dev section for:
Unpacking RAZR I boot.IMG from turl.
Our boot image isn't the same as others. There is no way u can extract things without the needed files. If u can't do anything with the topic about the boot.IMG in the dev section, I can't help u.
Sent from my GT-P5110 using XDA Premium HD app
I have find this.. But i don't understand what is the ''tool'' when you use...
can you give me all the URL of files and tool and... For editing the boot.img please ?
Thank's..
Up...
The only way (as far as i know) to unpack a boot.img from the Razr I is to use an linux powered PC. The tools in the topic that are provided need to be build first. And for it to build u need a linux (ubuntu) operating system. I will upload (when i have the time) my tools to unpack and repack the boot.img with a description on how to use them, but they only work on linux.
p.s. don't bump the post if it isn't answered in 1 day. Sometimes someone that will reply isn't online or is doing other things and didn't noticed it. If it were 3 or more days, oke. Just my opinion
Hazou
Bootimage tools
Here u go. My bootimage extract and pack package. It only works on linux. See the zip, and extract it somewhere in your linux distribution.
Instructions:
1. Put a boot.img in the root of the extracted bootimage packages (where the folders Ramdisk, Bootimage, Kernel, Tools are)
2. Execute the file extract.
3. Kernel can be found under the map kernel
4. Ramdisk can be found under the map Ramdisk/ramdisk
5. Modify your things
6. Pack the files by executing create.
Notes:
In the map Bootimage is a bootstub (bootold.img) needed for rebuilding the boot.img and some old scripts
In the map Kernel will be the extracted kernel. The file bzImage will always be used for rebuilding.
In the map Ramdisk will be the extracted ramdisk in the map ramdisk. The map 'ramdisk' will always be used for rebuilding,
In the map Tools will be the tools needed for extracting and creating.
If u have some questions about this tool, ask!
Credits to Turl1 for the tools
Hazou
[Q&A] [Stock ROM] Easy Stock Reset | Many Versions | Stock ROM + Recovery + Radio In
Q&A for [Stock ROM] Easy Stock Reset | Many Versions | Stock ROM + Recovery + Radio Included
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Stock ROM] Easy Stock Reset | Many Versions | Stock ROM + Recovery + Radio Included. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can' t Flash
Every time I try to flash the Optus AU reset onto my VODAPHONE AU M7, it either gets stuck at 10% if i do it with a full wipe, or 0% if I don't. Also, it never passes and MD5 verification, after multiple separate downloads.
Anyone know what to do?
Thanks.
TWRP back up of stock rom and stock recovery OTA 6.11.980.12
Crushalot
I have a TWRP backup of stock rom from OTA 6.11.980.12 (Optus Australia) if you are interested I can pm the link to you along with the stock recovery that came with that OTA, for you to make (when you have time ect) an aroma reset tool for Optus Aussie users that is current and only just pre Android L release for sense roms.
Let me know if that would help
Australian Optus Firmware & Nand of stock rom Rom
Crushalot
In case the mood takes you, and you one day feel like making an easy aroma reset for Optus Aussie users that will reset HTC m7-ul PNO7400 devices back to a (only just) pre Android L update, here is a TWRP back up of stock rom (ota 6.11.980.12) Optus Australia as, well as the Optus Aussie OTA 6.11.980.12 (contains stock recovery) 2x OTA links originally posted by deevan
TWRP Nand of stock rom Android 4.4.3, from ota 6.11.980.12 (Australia Optus)
mega.co.nz/#!BhBXBaBT!Fjsg4FNe3AzUCR-aTdiNOwM71zx6-zzKkVbuY-rZqWk
GREAT work BTW! I used your tool to successfully return my device to stock (for the purposes of updating my firmware) worked like a charm!!
firmware.6.11.980.10.zip 43.1 MB (by deeevan)
mega.co.nz/#!QlIjzZoA!R18LEGCFJ85YV91rgiViohqw-QCzXO4fVEVm9h4ab68
firmware.6.11.980.12.zip 19.1 MB (By deeevan)
mega.co.nz/#!N4oS3aSZ!z2aM04WPtN2p1d9cWnmwkBi6UY_sNCbDB0ZBDAe 2RMY
Im still under 10 posts so I cant post full links.
This may help ppl go back to stock in time for the Android L OTA push!
GREAT work BTW! I used your tool to successfully return my device to stock (for the purposes of updating my firmware) worked like a charm!!
Joeisgood99 said:
Crushalot
I have a TWRP backup of stock rom from OTA 6.11.980.12 (Optus Australia) if you are interested I can pm the link to you along with the stock recovery that came with that OTA, for you to make (when you have time ect) an aroma reset tool for Optus Aussie users that is current and only just pre Android L release for sense roms.
Let me know if that would help
Click to expand...
Click to collapse
You can make that your self
You want to I can help you
It's easy
1st time with help of @crushalot I made 4 reset Rom for India version
Make TWRP backup of Rom which you want to make stock Rom reset zip
Install ubuntu open ubuntu
Extract backup file in ubuntu
You need system folder + data/preload folder + stock Recovery + boot.img + radio.img (all files from same version)
Extract any of old reset Rom zip
Replace files and folders from New one
Now edit aroma script in meta-inf folderwith notepad +
Edit details Rom version radio version etc
Zip all files and folders
It's ready
yatindroid said:
Install ubuntu open ubuntu
Extract backup file in ubuntu
Click to expand...
Click to collapse
If you want to use windows instead of linux, you can extract twrp backup using cygwin. All you need to do is to rename your backup files adding .tar extension then extract them using cygwin
Code:
tar -xvf your_file_name.ext4.win.tar
eg. If you want to extract system.ext4.win000, system.ext4.win001 and data.ext4.win, rename them system.ext4.win000.tar, system.ext4.win001.tar and data.ext4.win.tar. Move the system backup files to C:\Cygwin\Home\UserName\backup\System and data backup to C:\Cygwin\Home\UserName\backup\Data
open a cygwin command prompt and change directory to the correct location:
Code:
cd C:\Cygwin\Home\UserName\backup\System
then in cygwin command prompt:
Code:
tar -xvf system.ext4.win000.tar
tar -xvf system.ext4.win001.tar
Code:
cd C:\Cygwin\Home\UserName\backup\Data
tar -xvf data.ext4.win.tar
Then you have 2 folders, One System folder and one Data folder you can use to make you reset rom.
alray said:
If you want to use windows instead of linux, you can extract twrp backup using cygwin. All you need to do is to rename your backup files adding .tar extension then extract them using cygwin
Code:
tar -xvf your_file_name.ext4.win.tar
eg. If you want to extract system.ext4.win000, system.ext4.win001 and data.ext4.win, rename them system.ext4.win000.tar, system.ext4.win001.tar and data.ext4.win.tar. Move the system backup files to C:\Cygwin\Home\UserName\backup\System and data backup to C:\Cygwin\Home\UserName\backup\Data
open a cygwin command prompt and change directory to the correct location:
Code:
cd C:\Cygwin\Home\UserName\backup\System
then in cygwin command prompt:
Code:
tar system.ext4.win000.tar
tar system.ext4.win000.tar
Code:
cd C:\Cygwin\Home\UserName\backup\Data
tar data.ext4.win.tar
Then you have 2 folders, One System folder and one Data folder you can use to make you reset rom.
Click to expand...
Click to collapse
Yes sir, that's exactly the method i use :good:
Thank you So MUCH!
I'll try that as soon as I get a chance, and report back
Cheers for the help. ?
yatindroid said:
You can make that your self
You want to I can help you
It's easy
1st time with help of @crushalot I made 4 reset Rom for India version
Make TWRP backup of Rom which you want to make stock Rom reset zip
Install ubuntu open ubuntu
Extract backup file in ubuntu
You need system folder + data/preload folder + stock Recovery + boot.img + radio.img (all files from same version)
Extract any of old reset Rom zip
Replace files and folders from New one
Now edit aroma script in meta-inf folderwith notepad +
Edit details Rom version radio version etc
Zip all files and folders
It's ready
Click to expand...
Click to collapse
yatindroid said:
You can make that your self
You want to I can help you
It's easy
1st time with help of @crushalot I made 4 reset Rom for India version
Make TWRP backup of Rom which you want to make stock Rom reset zip
Install ubuntu open ubuntu
Extract backup file in ubuntu
You need system folder + data/preload folder + stock Recovery + boot.img + radio.img (all files from same version)
Extract any of old reset Rom zip
Replace files and folders from New one
Now edit aroma script in meta-inf folderwith notepad +
Edit details Rom version radio version etc
Zip all files and folders
It's ready
Click to expand...
Click to collapse
alray said:
If you want to use windows instead of linux, you can extract twrp backup using cygwin. All you need to do is to rename your backup files adding .tar extension then extract them using cygwin
Code:
tar -xvf your_file_name.ext4.win.tar
eg. If you want to extract system.ext4.win000, system.ext4.win001 and data.ext4.win, rename them system.ext4.win000.tar, system.ext4.win001.tar and data.ext4.win.tar. Move the system backup files to C:\Cygwin\Home\UserName\backup\System and data backup to C:\Cygwin\Home\UserName\backup\Data
open a cygwin command prompt and change directory to the correct location:
Code:
cd C:\Cygwin\Home\UserName\backup\System
then in cygwin command prompt:
Code:
tar system.ext4.win000.tar
tar system.ext4.win000.tar
Code:
cd C:\Cygwin\Home\UserName\backup\Data
tar data.ext4.win.tar
Then you have 2 folders, One System folder and one Data folder you can use to make you reset rom.
Click to expand...
Click to collapse
Thanks Mate.
I will try on Ubuntu first as I use that about 90%of the time. I'll reply with results hopefully tomorrow! Excited to make my own easy reset with aroma.
Had to unlock bootloader via HTC token when my phone is S-Off...
My HTC M7 UL (PID)PNO7400, was rooted and later S-Off with fire water.
I had custom rom and recovery ect. After 6 months of this I wanted to update my firmware but for various reasons didn't want to do it via RUU so I found and used crushalots Easy Recovery Reset Tool.
This worked perfectly.
During the aroma install I chose NOT to install any firmware, just stock recovery and rom.
I also chose not to keep root as I believed that I may not be able to install OTA updates with rooted stock. (right or wrong?)
Immediately after everything was installed I was running stock 2.24.980.2 rom and recovery on 4.20.980.x firmware.
After relocking my bootloader via fastboot, there was no issues, my phone just downloaded several OTA in a row, installed each without a hitch, and about an hour and a half later I had a stock phone with the latest 6.11.980.12 firmware and software, with S-Off.
(BTW re locking the bootloader did not delete any of my data.)
As soon as this was finished I wanted to re install my beloved eragon rom, re gain root, and get my phone back the way it was pre the firmware update.
Having S-Off I thought this would be easy (fastboot flash recovery path/to/custom/recovery.img)
Didn't work.
Unfortunately I didn't keep a copy of the error message I got in terminal, however, I didnt have write permissions on that particular partition. (apologies to anyone trying to help as I know details are important here)
This stumped me, as I have rooted 3 other (older) HTC desire by getting S-Off then flashing custom recovery.img, (These phones were running 1.44 version of fastboot as opposed to my M7s 1.57) I tried to un lock the bootloader via fastboot commands just in case that worked post S-Off ie (fastboot oem unlock) but that didn't work. Firewater doesn't install its own bootloader so locking and unlocking via the s-off tool were not an option either.
I had to re apply to HTC for an unlock token and flash that before I could flash a custom recovery. I plan go back to stock again for the purposes of taking carrier OTA when my carrier starts updating with Android L, so would like to know if this is normal, if not how I possibly stuffed up.
Can any one explain why I had to unlock bootloader via HTC site when my phone is S-Off?
I'm interested in peoples thoughts/knowledge
Many thanks
yatindroid said:
You can make that your self
You want to I can help you
It's easy
1st time with help of @crushalot I made 4 reset Rom for India version
Make TWRP backup of Rom which you want to make stock Rom reset zip
Install ubuntu open ubuntu
Extract backup file in ubuntu
You need system folder + data/preload folder + stock Recovery + boot.img + radio.img (all files from same version)
Extract any of old reset Rom zip
Replace files and folders from New one
Now edit aroma script in meta-inf folderwith notepad +
Edit details Rom version radio version etc
Zip all files and folders
It's ready
Click to expand...
Click to collapse
Hi Mate.
Thanks again. A little help needed.
When extracting the .rar from the TWRP recovery I made, using terminal command line [7z x /path/to/some.rar] in ubuntu i get 4300 of this type of error
can not open output file system/bin/mkswap
can not open output file system/bin/mkswap
can not open output file system/bin/readlink...ect
Basically at the end I get a system folder with about 3 items in it, as 7zip .rar tool cant decompress most of the files from the .rar
Right clicking on system.ext4.win.000 and system.ext4.win001 and selecting 'Extract files here' or 'open archive' results in error "could not open 'xx'. Archive type not supported."
Are you able to give me more detailed instructions on how to extract/unpack the system.ext4.win.000 and system.ext4.win001
Do I need to change the file name before extracting ?
Extracting the files from crushalots tool and extracting the files from the new TWRP then replacing relevant files and changing the manifest to reflect said change in Easy Recovery tool seems quite simple, however Im having trouble just extracting the files....
Im missing something obvious.
Thanks.
Joeisgood99 said:
Hi Mate.
Thanks again. A little help needed.
When extracting the .rar from the TWRP recovery I made, using terminal command line [7z x /path/to/some.rar] in ubuntu i get 4300 of this type of error
can not open output file system/bin/mkswap
can not open output file system/bin/mkswap
can not open output file system/bin/readlink...ect
Basically at the end I get a system folder with about 3 items in it, as 7zip .rar tool cant decompress most of the files from the .rar
Right clicking on system.ext4.win.000 and system.ext4.win001 and selecting 'Extract files here' or 'open archive' results in error "could not open 'xx'. Archive type not supported."
Are you able to give me more detailed instructions on how to extract/unpack the system.ext4.win.000 and system.ext4.win001
Do I need to change the file name before extracting ?
Extracting the files from crushalots tool and extracting the files from the new TWRP then replacing relevant files and changing the manifest to reflect said change in Easy Recovery tool seems quite simple, however Im having trouble just extracting the files....
Im missing something obvious.
Thanks.
Click to expand...
Click to collapse
I simply extract system.ext4.win000 file in Ubuntu nothing more needed not a single error
its tar not rar !
Whoops! . Tar.
Thanks again I'll keep trying.
Did crushalot send you any written instructions? Are they in a thread somewhere, or just basically what you already posted?
Thanks for your time.
Joeisgood99 said:
Whoops! . Tar.
Thanks again I'll keep trying.
Did crushalot send you any written instructions? Are they in a thread somewhere, or just basically what you already posted?
Thanks for your time.
Click to expand...
Click to collapse
I asked some questions via PM he just replied that
ask anything when you stuck
yatindroid said:
I asked some questions via PM he just replied that
ask anything when you stuck
Click to expand...
Click to collapse
For anyone else following this thread atm I solved the problem by re naming the system file extension in TWRP recovery from . win to . tar. In some TWRP back ups there were 2 system folders. A system.4ext000.win and system. 4ext001.win I just merged them during the extraction process.
Also there was no Data/preloaded folder in crushalots reset tool or in any twrp backup I have made.
Haven't tested the modified reset tool yet but will let u all know if I did it correctly!
Joeisgood99 said:
For anyone else following this thread atm I solved the problem by re naming the system file extension in TWRP recovery from . win to . tar.
Click to expand...
Click to collapse
Exactly, see post #6
In some TWRP back ups there were 2 system folders. A system.4ext000.win and system. 4ext001.win I just merged them during the extraction process.
Click to expand...
Click to collapse
Exactly, there are 2 system archive because of the file size restriction. Merging them after extracting the files is correct.
Also there was no Data/preloaded folder in crushalots reset tool or in any twrp backup I have made.
Click to expand...
Click to collapse
Without /data/preload, your reset rom will not be ota update ready. You don't have /data/preload in your backup probably because you have unlocked the bootloader and did the nandroid backup after (unlocking bootloader erase /data/preload)
Joeisgood99 said:
For anyone else following this thread atm I solved the problem by re naming the system file extension in TWRP recovery from . win to . tar. In some TWRP back ups there were 2 system folders. A system.4ext000.win and system. 4ext001.win I just merged them during the extraction process.
Also there was no Data/preloaded folder in crushalots reset tool or in any twrp backup I have made.
Haven't tested the modified reset tool yet but will let u all know if I did it correctly!
Click to expand...
Click to collapse
In Ubuntu install 7zip software
don't rename anything just open with archive manager
system.4ext000.win open this
crushalot tool not have data/preload because most of tool was 3.xx version sense 5.5 that time preload files included in system folder
yatindroid said:
In Ubuntu install 7zip software
don't rename anything just open with archive manager
system.4ext000.win open this
crushalot tool not have data/preload because most of tool was 3.xx version sense 5.5 that time preload files included in system folder
Click to expand...
Click to collapse
Thanks again yatindroid
I already have 7zip installed, However there is no option in archive manager to extract anything with it. After cd to file location I can view the . win file in terminal using [7z l file. win] but the [7z x file.win - d folder/i-want/extracted/to] command outputs the same error as stated in above post.
Q1) That aside the last step in this whole process is to zip it all up again as a . zip, so I'll be changing the file extension anyway, so does it matter if I change the file extension from . win to .tar for the purposes of extracting? If so ease explain why.
Q2) the ONLY place I have found a data/preload folder is inside a firmware .zip extracted from an OTA. It's definitely not in any TWRP back up. Did you leave that detail out of your initial instructions? Can you please tell me where to get the /preload folder from if not from the same OTA the recovery.img comes from.
Q3) do I put the data/preload folder inside the system folder of the reset tool or have it separate, along with radio.img, boot. img, recovery.img and aroma files ect.
Thanks for your time.
---------- Post added at 09:46 AM ---------- Previous post was at 09:33 AM ----------
alray said:
Exactly, see post #6
Exactly, there are 2 system archive because of the file size restriction. Merging them after extracting the files is correct.
Without /data/preload, your reset rom will not be ota update ready. You don't have /data/preload in your backup probably because you have unlocked the bootloader and did the nandroid backup after (unlocking bootloader erase /data/preload)
Click to expand...
Click to collapse
Thanks array.
I replied to the other post before yours came up. Forgive me if I ask similar questions.
I'm assuming I just copy the /preload folder from the same OTA I get the radio and recovery. img from.
Do I put the /preload folder inside any other folder within reset tool for a 6.xx version or have it beside the system folder and .img files.
Regards and Thanks.
Joeisgood99 said:
I'm assuming I just copy the /preload folder from the same OTA I get the radio and recovery. img from.
Click to expand...
Click to collapse
It should work. The data/preload folder from an ota zip usually (afaik this is true for the dev edition version) include all /data/preload files. If its the same thing for your version then you should be fine. In /data/preload you should have these files:
YOUR_CID.XML
All the weather animations (mp4 files)
some .png files for photo editing
htc preloaded app like flashlight.apk and calculator.apk. You might have more app depending your version.
Do I put the /preload folder inside any other folder within reset tool for a 6.xx version or have it beside the system folder and .img files.
Regards and Thanks.
Click to expand...
Click to collapse
the folder must be in your_reset_rom.zip/data/preload
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
alray said:
It should work. The data/preload folder from an ota zip usually (afaik this is true for the dev edition version) include all /data/preload files. If its the same thing for your version then you should be fine. In /data/preload you should have these files:
YOUR_CID.XML
All the weather animations (mp4 files)
some .png files for photo editing
htc preloaded app like flashlight.apk and calculator.apk. You might have more app depending your version.
the folder must be in your_reset_rom.zip/data/preload
Click to expand...
Click to collapse
Thanks for your excellent and timely reply.
More Qs.
I now have all folders as per your above post. I have taken data/preload, boot.img radio.img and recovery.img straight from OTA. 6.11.980.10
However my stock nand was of 6.11.980.12.
Q1) So do you know if having a system folder derived from a slightly newer version work? As far as I know the .12 OTA was a patch for the 'no voice during call' bug. OTA. 6.11.xxx. 12 did not contain a radio.img AND I can't get a data/preload folder for that ota as I can only find a 6.11.xxx.12 firmware. Not the whole OTA, which is why I reverted to making a . 980.10 reset tool despite having a slightly newer NAND.
Q2) I have edited the updater script in META-INF to reflect new radio and Android version ect. Do I need to update the MANIFEST. MF?
Hope that was clear enough to understand.
A big THANKS for your Help and time!
I was flashing a couple of ROMS yesterday while unbricking my MateS. The C00B144 Chinese ROM as the scales app and it works well on my 64GB Mate S. I can access the scales setting pages using a short cut creator but the app itself is missing from my C470*** ROM version.
Does anyone have the ability to extract the APK and send me a link to download it please? I am sure other would appreciate it and it will prove once and for all that all Mate S Phones have the ability to use them.
Much appreciated to whoever can get this app extracted for me.
That APP is mostly useless
Thats the one. Many thanks. I know it has little use but people just dont believe a phone can weigh things.
Big thanks for sharing.
It works but it is very inaccurate!
I place an apple and it showed 360grams. I used kitchen scale (the one for making food) and it showed 220grams
Anyway, it is fun to see it in action
Sent from my HUAWEI CRR-L09 using Tapatalk
How to extract APK from the Update.App?
I unpacked the update.app with the Huawei Update unpacker but i could not find any tool to open the system.img
Sventastic said:
How to extract APK from the Update.App?
I unpacked the update.app with the Huawei Update unpacker but i could not find any tool to open the system.img
Click to expand...
Click to collapse
use ext4_unpacker
You can use "HuaweiFirmwareExtractor.exe" for extracting Huawei Update.app , when you have extract it you can use 7zip or other Tools.
When it don't work write me a pm and I look what I use for that on my pc.
What do you want make?
I must look , you can do a system Backup from system only via adb but here I must look what you must do in Terminal.
Found in firmware Finder.. It seems to be for P30 Pro.
http://update.dbankcdn.com/TDS/data/files/p3/s15/G4705/g1755/v304788/f1/full/update_full_base.zip
I want to extract it so I can get apks such as the launcher or camera app. I have managed to extract UPDATE.APP and I saw inside a file called SUPER. img which I suppose is equivalent to the usual system.img however I can't extract it. I tried different tools but I failed.
Does anyone know how to unpack that SUPER.img file?
orpheliaca said:
Found in firmware Finder.. It seems to be for P30 Pro.
http://update.dbankcdn.com/TDS/data/files/p3/s15/G4705/g1755/v304788/f1/full/update_full_base.zip
I want to extract it so I can get apks such as the launcher or camera app. I have managed to extract UPDATE.APP and I saw inside a file called SUPER. img which I suppose is equivalent to the usual system.img however I can't extract it. I tried different tools but I failed.
Does anyone know how to unpack that SUPER.img file?
Click to expand...
Click to collapse
Hi m8, even if you manage to unzip the SUPER.img file (you can try with 7zip, maybe it will work, don't bet on it) you can't install those apk's on EMUI 9.1, because they are different.
On EMUI 10 you can push those apk's (and camera libs folders) only if you're rooted and have bootloader unlocked.
Later edit: or you can rename it to system.img and try using this tool. Ignore, the tool is not available anymore
SilviuO said:
Hi m8, even if you manage to unzip the SUPER.img file (you can try with 7zip, maybe it will work, don't bet on it) you can't install those apk's on EMUI 9.1, because they are different.
On EMUI 10 you can push those apk's (and camera libs folders) only if you're rooted and have bootloader unlocked.
Later edit: or you can rename it to system.img and try using this tool. Ignore, the tool is not available anymore
Click to expand...
Click to collapse
I still have hopes as based on my experience not always the system app are only restricted to the new Android SDK. So maybe those two apks will be compatible with android P SDK or can easily be modes to make them compatible
However I didn't find a way to unpack SUPER.img despite trying different methods..
hi,
but full update it works?! did you tried?
thanks.
stefanz08 said:
hi,
but full update it works?! did you tried?
thanks.
Click to expand...
Click to collapse
I tried it just now and it did not work on my P30 Pro!
How did the full update work for you? Can you please tell how you managed to flash full update?
you can used my method:https://blog.cofface.com/archives/2954.html
cofface said:
you can used my method:https://blog.cofface.com/archives/2954.html
Click to expand...
Click to collapse
any repack method for super.img back with same hashed and header.if possible i can pay for it
---------- Post added at 05:04 PM ---------- Previous post was at 05:02 PM ----------
pakfixrom said:
any repack method for super.img back with same hashed and header.if possible i can pay for it
Click to expand...
Click to collapse
unpack already supported superR kitchen pro version
pakfixrom said:
any repack method for super.img back with same hashed and header.if possible i can pay for it
---------- Post added at 05:04 PM ---------- Previous post was at 05:02 PM ----------
unpack already supported superR kitchen pro version
Click to expand...
Click to collapse
superR kitchen pro version,Unpack is ok but can't repack. I am looking forward to the repack tool
I've extracted using: imjtool.
http://newandroidbook.com/tools/imjtool.html
Once you've extracted hw_product, cust, vendor, system, odm how do you extract those files?
someone managed to open and close Super.img ??