Need help for a soft brick note 5 - Galaxy Note5 Q&A, Help & Troubleshooting

hey guys, i need some help here for my note 5.
I have a SM-N920I (note 5) which is an Australian Variant ( i assume, it was a replacement for my note 3).
I was on 5.1.1 (N920I) then when Android 6.0 first released, i have flashed my note 5 to 6.0.1 (N920G), and then have been using it for couple of months.
Recently, due to some reception problem, i need to flash it back to an Australian Variant rom, but i have forgot to take of the FRP lock. i used odin 3.12.3 to flash it to 6.0.1 (N920I), and half way through my phone turn off and restart. After that, i am not able to get into the system and show need to use emergency recovery.
I have tired flash both 920I and 920G stock roms, but all shows FRP lock, or some kind of error.
Also tried to use Smartswitch, but i cant find the S/N number anywhere in the box. so i used my friend's note 5 AU s/n, but still shows error.
do any one knows any other ways that i can try???? or is there anyone nice enough to let me try their I920G note 5 s/n to flash my note 5?

Go to developer option..enable OEM lock..that cause the opertion to flash will not done..FRP LOCK cause OEM not enable..go to setting>developer option>OEM..(enable it)
Did u turn on you developer option?if not..go to about device..search build num and press it untill show your are dev..check it out bro..good luck.
Sent from my SM-N9208 using Tapatalk
---------- Post added at 12:22 PM ---------- Previous post was at 12:20 PM ----------
smeth_90 said:
Go to developer option..enable OEM lock..that cause the opertion to flash will not done..FRP LOCK cause OEM not enable..go to setting>developer option>OEM..(enable it)
Did u turn on you developer option?if not..go to about device..search build num and press it untill show your are dev..check it out bro..good luck.
Sent from my SM-N9208 using Tapatalk
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N9208 using Tapatalk
---------- Post added at 12:27 PM ---------- Previous post was at 12:22 PM ----------
Flsah the same firmware that you use on note 5..or check at sammobile.com the free firmware that same mobile model and ver of firmware..good luck bro..i also face like this before this time..flash but forget to enable OEM LOCK..so i just install again my firmware that i use and get it back using odin..please read and search any method on another post..this will help you..?
Sent from my SM-N9208 using Tapatalk

Use emergency recovery at kies...
Sent from my SM-N9208 using Tapatalk

Related

5830i Samfirmware cut in 4 pieces

I done with extracting the firmware by splitfus2
Extracted version of S5830iXXLD3_S5830iODDLD2_RST_S5830iDDLD1_HOME.tar.md5
(S5830IXXLD3_S5830IODDLD2_INU)
The zip contain CSC , Kernal (BOOTLOADER) , MODEM , PDA
Download
Click on thanks If u like it .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Country India Date 2012 July Android 2.3.6 PDA S5830IXXLF3 CSC S5830IODDLF1
http://www.mediafire.com/download.php?2x8s2621z5pm0aa
So....what is the use of cutting the firmware into 4 pieces?
Sent from my GT-S5830 using Tapatalk 2
How did you manage to do that? I tried several firmwares.None of them would open up
---------- Post added at 10:00 PM ---------- Previous post was at 09:59 PM ----------
galaxyace152 said:
So....what is the use of cutting the firmware into 4 pieces?
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Many...You get a fully working boot.img,upgraded libs and all the things in /system.
---------- Post added at 10:00 PM ---------- Previous post was at 10:00 PM ----------
smitdesai said:
Click to expand...
Click to collapse
Nothing will happen if you flash the firmware of another country.
Prawesome said:
[/COLOR]
Nothing will happen if you flash the firmware of another device.
Click to expand...
Click to collapse
that means country not device:silly:
madman said:
that means country not device:silly:
Click to expand...
Click to collapse
Oops...Fast typing
smitdesai said:
Country IndiaDate 2012 JulyAndroid 2.3.6PDA S5830IXXLF3CSC S5830IODDLF1
http://www.mediafire.com/download.php?2x8s2621z5pm0aa
Click to expand...
Click to collapse
Can you please tell me...which file goes into which section of the odin. i am confused
i want to know about XXLF3 files ( will the kernel go into the bootloader in this one too? ) . Do we have to flash all the files together?
Thanks for this thread, but actually what is the most recommended stock rom? later I'll flash with a custom rom (Retribution Beta3 or RazoDroid V2)
I don't care about languajes I always use default English :good:

[Q] Cyanogenmod only shows 'A N D R O I D' screen and locks up. Uh oh.

So, I think I went and done it. I think I bricked my Samsung Galaxy Ace S5830D while attmepting to flash Cyanogenmod. Dammit. I followed these installation instructions, then this happened:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It won't move from here. It just boots up, goes to this screen, and hangs. I can't boot into recovery mode. So, two questions:
Am I screwed?
How can I fix this?
I think you've tried the cm official rom. But my friend, as said a million times before, these roms are only for GT-S5830 & not GT-S5830 D. Your hope now is to flash stock rom via odin . Just try getting your phone into the downloading mode by using the combo, home+power+volume down ( of course with phone off ). If you get a screen with " Downloading " written on it, then you have hopes. If not you'll have to go for jtag or something, else a nearest service station is your last resort.
Sent from my GT-S5830 using xda premium
Technically the D should work, only i, V and C doesn't. Is a logcat possible?
Sent from my GT-I9070P
Follow the instructions from the forums. Phone appears to be bricked with just "ANDROID" being displayed and before any one asks my device is a Galaxy ace GT-S5830. I've got to the downloading screen on my phone. Where to next?
Any help would be much appreciated
dvorak2 said:
Follow the instructions from the forums. Phone appears to be bricked with just "ANDROID" being displayed and before any one asks my device is a Galaxy ace GT-S5830. I've got to the downloading screen on my phone. Where to next?
Any help would be much appreciated
Click to expand...
Click to collapse
You need to flash a fresh Stock rom via Odin
---------- Post added at 09:21 AM ---------- Previous post was at 09:07 AM ----------
Viper The Ripper said:
You need to flash a fresh Stock rom via Odin
Click to expand...
Click to collapse
Follow this guide HOW TO USE ODIN... this thread is really useful too ROOT,CWM,ODIN and JB Q&A Thread

Can't get WiFi calling to work

I can't get WiFi calling to work what so ever. I've tried different ROMs etc rebooting, resetting different routers, won't work. I have WiFi calling on and set to preferred.
I am on T-Mobile, and using lmy28e
Sent from my SM-T320 using Tapatalk
What kernel?
Stock. I got it to work. No idea what was wrong. I read around and most people say if your boot.img file is modified WiFi calling won't work. A few others said it had to do with the radio.
So I downloaded the factory image extracted the needed files and flashed boot.img, the radio and cache.img . rebooted and it works right away .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using Tapatalk
I had the same issue and reflashing those 3 img also cleared it up. Good to know if it happens in the future. I'm not sure what could have corrupted those.
zach.kmi said:
I had the same issue and reflashing those 3 img also cleared it up. Good to know if it happens in the future. I'm not sure what could have corrupted those.
Click to expand...
Click to collapse
I can't figure out what files you guys used and what method you used to flash boot.img and cache.img if that's even doable when rooting with cf auto root it auto flashed a modified boot.IMG
I don't wanna screw up my phone I'm rooted boot loader unlocked just got my phone replacement from motorola after a RMA. But I'm not seeing WiFi calling in the drop down menu although its in the settings But when enabled I see nothing showing in notification bar
Sent from my Nexus 6 using XDA Free mobile app
---------- Post added at 06:25 PM ---------- Previous post was at 06:24 PM ----------
androidddaaron said:
I can't figure out what files you guys used and what method you used to flash boot.img and cache.img if that's even doable when rooting with cf auto root it auto flashed a modified boot.IMG
I don't wanna screw up my phone I'm rooted boot loader unlocked just got my phone replacement from motorola after a RMA. But I'm not seeing WiFi calling in the drop down menu although its in the settings But when enabled I see nothing showing in notification bar
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Edit: Its working with no fix using shamu 6 v4.3.0 ROM ,but it wasn't working on Bean's town Pure nexus rom
Sent from my Nexus 6 using XDA Free mobile app

N910W8 calibration issue after falshing wrong kernel, S pen is still working

I flashed some wrong kernel last Friday and the issue happened, now if I use my finger, I just can't press to the right spot on the screen, it always actually touches somewhere a little lower , but the S pen is working fine.
this is a similar issue as what I have found in S3 forum here:
http://forum.xda-developers.com/galaxy-s3/help/unresponsive-touch-screen-kernel-flash-t2574175/page2
went to 3 phone repairing stores, but all of them said they didn't even know what the problem is and couldn't fix it , geeeez, how these ppl can open a repairing store but can't fix problem , don't even wanna make a try.
somebody , please help LOL, thanks
*#2663#
into your original TW dialer press update then reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N920T using Tapatalk
---------- Post added at 06:12 PM ---------- Previous post was at 06:02 PM ----------
http://forum.xda-developers.com/showthread.php?t=2986883
Sent from my SM-N920T using Tapatalk
Teknodad1974 said:
*#2663#
into your original TW dialer press update then reboot
Sent from my SM-N920T using Tapatalk
---------- Post added at 06:12 PM ---------- Previous post was at 06:02 PM ----------
http://forum.xda-developers.com/showthread.php?t=2986883
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
oh man, u made my day, it worked, you are even better than those who 's running repairing store, OMG, very impressive, thanks very much
Teknodad1974 said:
*#2663#
into your original TW dialer press update then reboot
Sent from my SM-N920T using Tapatalk
---------- Post added at 06:12 PM ---------- Previous post was at 06:02 PM ----------
http://forum.xda-developers.com/showthread.php?t=2986883
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Man, you are a full-on life saver. I got my phone into this state last night after having a problem installing a custom recovery, and nothing worked to get it back. I even went so far as to revert it to 100% stock with a full factory reset with no improvement. I gave up and went to bed finally about 6am. I just found your solution, and it did the trick.
THANKS!
Bear

huawei p9 32 gb

hi yesterday i receive my huaweip9 32gb.The only problem is i can remove the 3g signal is next the the battery icon top right.i have disable the data disable wi fi and the choice if wi fi has not good signal connect to my dat its all closed byt the 3g is always thers only if i remove my sim card.Someone said that my mobile search for the best network choice so thats why it appears other says that with the launcer nova i dont rember now i can remove the icon.Please if anybody know how to remove it it really sucks and confuses me thank you
Can you post a screenshot?
Sent from my EVA-L09 using Tapatalk
I have same issue when i instal custom rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
zelenko said:
I have same issue when i instal custom rom.
Click to expand...
Click to collapse
CENTRE CLOCK!!!! Oh my... what I would give to be able to centre the clock!!!!
bunnybash said:
CENTRE CLOCK!!!! Oh my... what I would give to be able to centre the clock!!!!
Click to expand...
Click to collapse
Install custom rom. In K-settings you have more features.
---------- Post added at 11:08 AM ---------- Previous post was at 11:05 AM ----------
tms13 said:
hi yesterday i receive my huaweip9 32gb.The only problem is i can remove the 3g signal is next the the battery icon top right.i have disable the data disable wi fi and the choice if wi fi has not good signal connect to my dat its all closed byt the 3g is always thers only if i remove my sim card.Someone said that my mobile search for the best network choice so thats why it appears other says that with the launcer nova i dont rember now i can remove the icon.Please if anybody know how to remove it it really sucks and confuses me thank you
Click to expand...
Click to collapse
It's a part of theme. Download theme editor from play store and you can able to change.
Sent from my EVA using Tapatalk
zelenko said:
Install custom rom. In K-settings you have more features.
---------- Post added at 11:08 AM ---------- Previous post was at 11:05 AM ----------
It's a part of theme. Download theme editor from play store and you can able to change.
Sent from my EVA using Tapatalk
Click to expand...
Click to collapse
download it go to browse theme but i can find it its the first heme when you buy the huawei

Categories

Resources