I would like to get hold of either freeware or commercial (not too expensive)application to go on my XDAIIi to enable me to stop incomming calls/SMS/MMS from specified phone numbers. I would appreciate anyones advice on which are the best applications that will enable me to do this. Obviously being a XDAIIi it must be 2003SE compatible.
Call & SMS Filter
I personally use Call & SMS blocker it can create list the person who you want to can contact/can't contact. Give it try:
http://msmobiles.com/news.php/4722.html
I am using MagiCall. It is the best.
Anybody can tell me or there is track and trace software availeble for the Trinity?
It would be nice if I could locate people whit a phone with GPS ofcourse the person itself should be able to switch the track and trace off.
Thanks in advance
Willem
i'd asume that any pocketpc track'n'trace software would work
Yep I Use Vito Findme its free and sends your gps coordinated by sms to the sender
ie: mines activated by the word GPSFIX in a sms so whenever someone texts that it turns on gps sends my coordinates and then switched off gps again,
amazing bit of kit and its free
Hello
can somebody help me understanding the difference betwenn Voice command and speed dial and if I can use both on the same PDA ?
So far I understand that
- Speed Dial dials numbers and start programs by using voice tags
- you need to train each name to be recognized
- there is no true voice recognition
- Voice command dials numbers and starts programs by voice recognition
- in addition VC reads calendar entries and SMS/E-Mail
- there is no training mode to increase accurancy
So which program would provide better results for recognize and dial numbers by voice ?
Can I run both in parallel and use VC for the calendar function and Voice speed dial for the dialing ?
Plus I try to install VC 1.6 now .. but the button maps only to the explorer button on my TytnII .. not able to move him to the voice record button with the button application in settings
any suggestion / fix
Thanks freecall
freecall said:
not able to move him to the voice record button with the button application in settings
any suggestion / fix
Click to expand...
Click to collapse
I have the same problem.... any solution?!?!?!?
Cyberon is crap. I posted a detailed procedure for replacing it here:
http://forum.xda-developers.com/showthread.php?t=337501
I have installed Cyberon voice commander v2.0 and i am very happy with it when i use it with my bluetooth!!!
My only problem is that i do not know how to assign this program to the default "button 6".
I think default settings are:
"Button 6" --> Cyberon voice commander and
"Button 6 (Hold)" --> Record. (This one works).
hmm that sounds like a drastic deinstall .. so anyway to get the Voice speed dial back without doing a full hard reset if I would it like better than VC after some testing ?
Freecall
M$ Voice Command ROCKS!
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Russ741 said:
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Click to expand...
Click to collapse
I have to agree with Russ. Microsoft Voice Commander is by far the best ~$17.00 I have spent for this phone, as well as the 8125 I had before this. The Voice regconition is awesome. I did have to change the buttons as described above. I chose the camera button as I never use the camera anyway. It works great with my HT700(headset) as well as the HT820(bluetooth headphones). The options allow for a good level of customization as well.
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
freecall said:
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
Click to expand...
Click to collapse
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Russ741 said:
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Click to expand...
Click to collapse
I did not uninstall Voice Dial. IF you want to hear the calls and emails, make you configure VC properly. There is settings for only:
1.) Only announce during Free-Time. Make sure you check that one to whatever you want.
2.) Only High Priorty Emails get annouced. Again, check whichever option you want.
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Say "What can I say?" and you'll have your answer...
simon-ph said:
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Click to expand...
Click to collapse
or go to the Microsoft website and look up VoiceCommand 1.6 for PPC. The list is really quite long!
Russ741
Any ideas Gang?
So, after following the thread for removing voice dialer and remapping the PTT button to become button 6 and button 6 (hold) VC is still not announcing incoming calls (and yes I have configured the options!) anyone have any idea why it would perform 90% of its duty and not the last 10%?
Russ741
Are you sure it's not announcing them, or is it possible it's announcing them through the "wrong" speaker? If you've got it set to use BT, BT, and only BT, then all of the announcements go through the headset, or don't get made if it's not currently connected (like walking out of range and then back in).
I tweaked mine to announce only through the speaker, then turned it off because the robot voice annoyed me, but at first I thought it wasn't working...
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
It's based on the contact name, so "Call Smitty" will confuse it.
Is it possible to send messages just using voice or only receive them?
jackjohnson said:
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
Click to expand...
Click to collapse
It is based on what ever names you have in contacts so, for example if I want to call my office I say; "Call work" since there is only one number in the contacts database VC doesnt ask for Mobile, home or work. And since my office is just listed as First Name: Work Last Name: <blank> it understands.
Russ741
emmit said:
Is it possible to send messages just using voice or only receive them?
Click to expand...
Click to collapse
I simply reads the text or email to you, so there is no way to compose a message with VC.
Russ741
I use a lot of prepay phone cards to call home and they all uses access numbers and pin codes. I always have to write down phone numbers or try to remember them because i can't send or dial contacts directly as DTMF. Can anybody help please.
use magicall
i have been ysing magicall for sometime now it is the best solution for callfiltring and it will solve your porablem too juuat like you i make many calls using prepaid card and magicall has ooption to filter your outgoing calls, if you are intrested you can ask later i will tell you how to set it up
DTMF help
Thanks but the software doesn't have the feature which I am interested in. I want to be able to send phone numbers directly fron contacts as a DTMF string while already on a call rather than typing it on the pad.
I could have sworn that Pocket Informant 2007 allowed you to do this... (under 2003SE at least) but I can't find it on my Kaiser at all
Graham
Anyone have a shortcut for enabling call forwarding? I always forward to the same number. I would like to be able to use a button or voice command to bring up the call forwarding screen, and then just click yes/OK to enable or disable it. Anyone else using this?
By the way. I have been using ATT's fast forward service for a couple of years. Do I need to continue paying for this, or will the phone redirect the calls?
Thanks,
Tom
Bump. I'd really love to find how to do this also, I'm doing it several times a day ...
On my 8925 phone I created two contacts.
Turn Forwarding On:
_OnForward
*21*5125551212#
(replace 5125551212 with the areacode and phone number you want to forward your calls to)
Turn Forwarding Off:
_OffForward:
##21#
The _ puts the two items at the top of my contacts list. I click contacts and then press call on the selected forwarding option. Sometimes I get an error message "command not supported", but that is related to my phone's connection strength and not the programming. This has been working well for me for about a year. I have tried to make a couple of buttons that dial the contacts directly from another screen, but that hasn't worked. You have to open contacts and the press call on the option you want.
Later-
Good morning gents.
I have an HTC TyTN II with Win Mobile 6.1
I created the contacts like that and on my "Favorite People" page I put the contact there, it just says :
"Cannot Complete the call. the Signal may be unavailable or the phone number may not be valid. Verify the number or try again later."
From the contact list it works of course.
Another question regarding call forwarding. Is there a way to have an icon on the top bar that says the call ARE being forwarded... I keep missing a couple of calls that end on my home answering machine because I forgot to forward
Vesperatus-
I have all of your same issues. As far as I know, there aren't any solutions. You just have to remember to unforward your phone.....
-Later