Related
Is there anyway to root this ?
Of course, just follow these easy steps and then enjoy your rooted android (If you don't understand something from the steps, google it or ask me.)
1. Unlock your Bootloader (you will need ADB and to factory reset after unlocking.)
-Type in Google "unlock sony bootloader" and click on first link.
-Select your device, click continue and enter your email address, you will need your IMEI of your smartphone, then you will receive your unlock key in your email address.
-After you did all of this, carefully read the instructions on Sony website and you will unlock your Bootloader in 1-5 minutes.
2. Now with unlocked Bootloader you can flash Philz custom recovery via ADB (with fastboot installed.)
-Go to http://forum.xda-developers.com/xperia-e1/general/philz-touch-recovery-xperia-e1-t2941831 and download the recovery.
-Now put recovery.img who you downloaded in ADB/platform-tools
-Enable USB Debugging in Developer options.
-Connect your smartphone with USB and run ADB (to make sure you connected ADB, type "adb devices" and you should be able to see your device (if not, you did something wrong.)
-While in ADB, type this command: adb reboot bootloader (this will reboot in fastboot.)
-Now, when in fastboot mode, type this: fastboot flash recovery recovery.img (the flash finish for 1 sec.)
-Type "fastboot reboot" while in fastboot, and your device should be ready with installed custom recovery.
-You can enter Recovery by power off your smartphone, then press: "Power" + "Volume UP".
3. Download Latest SuperSU (this is the root): https://download.chainfire.eu/1017/SuperSU/SR1-SuperSU-v2.79-SR1-20161221223537.zip
-Put the SuperSU.zip in your SD card.
-Boot in Recovery.
-Choose "Install Zip".
-Choose "Choose zip from /sdcard".
-Select your .zip file and tap on him.
-Choose "Yes".
-Choose "Reboot System Now" (Or if it does not show, then go back to main menu and choose it.)
Congratulations, you flashed SuperSU/root successfully.
If you have questions, ask me and I will answer when I can/see them.
Easiest way is have any recovery on your phone, doesn't really matter If you have Caio's kernel + TWRP, or the regular one PhilZ recovery
Download SuperSU from Google Play, when it asks you to update the binary tap on Yes, and when it asks you again how to update the binary, just tap on TWRP
On the next boot you will have root.
Just use kingroot and supersume to get supersu without computer. I use kingroot 4.5 because newest one doesn't work with supersume. good luck!
IMPORTANT NOTE ABOUT ROOTING:
After flashing TWRP 3.0.2, use the SuperSU 2.46 flashable zip, do NOT use latest version or will result in a bootloop. Good Luck and have fun with rooting.
REQUIREMENTS
1- Unlocked Bootloader (search on google if you dont know how to unlock)
2- Drivers and Adb/Fastboot commands knowledge
--------------------------------------------------------------------------------------------------------------------------------
New TWRP bugfix update! Now you can flash stock rom on TWRP without bricking! Download Page updated!
Bugs:
1- adb shell command needs to be sent before system partition is mounted or it will give an error, after doing adb shell you can mount system and do all the modifications you need.
2- You cant flash any img on twrp it gives an error, im trying to fix.
3- Backups do work, but everytime twrp restarts, the serial number folder seems to change (which means that on /TWRP/BACKUPS/serialnumber/backupsinside/ changes every reboot so you have to go get the backup inside the old serialnumber folder and put on the new serialnumber folder).
Im leaving an unsecured boot image because system does not boot android if anything seems changed. So please if system does not boot after flashing twrp/rooting, flash the unsecured boot img on fastboot
Steps to Install TWRP and root
1. Download and extrct the files: https : // drive. google . com/file/d/0BxzG5iupOOSKNTdlRC1Wd0VmTlk/view
2. Power off the tablet.
3. Enter fastboot mode by pressing the power button while holding down Vol -
4. Open up command prompt and navigate to the directory where fastboot.exe is located.
5. Pass the following commands:
fastboot flash boot unsecuredboot.img
fastboot flash recovery TWRP.img
6. Reboot into recovery (TWRP) and install SuperSU v2.46.zip ---
Continuation 6. Step by Step of Step 6 since people seem to have been running into issues with it:
After rebooting to TWRP and having SuperSU.zip in the tablet storage. Go on Install tab and press the supersu file and install/flash it then reboot the device.
Pre-requisite :
1.Unlocked Bootloader
2. Backup your data (Just in case you brick your device)
3. Download twrp.img and copy it into your computer.
4. Download and Copy flashable TWRP and Magisk zip into your device.
Steps:
1. Go to the twrp.img file location into your computer. "cmd" in path directory bar and hit "enter".
2. Reboot your device into fastboot mode and connect to your computer
3. Enter following command : fastboot devices (You can see your device listed over there)
4. Enter another command : fastboot boot twrp.img (Wait for a while and your device will boot into twrp)
5. Now flash the twrp flashable zip and reboot your device.
6. Now install magisk.zip to gain a root access.
Download all the files from : https://drive.google.com/drive/folders/1HTmBLWiAwrXzdjipsKu69VfWJcjaWAFC?usp=sharing
This is super! I can confirm it's working, but it broke the wifi and camera.. how did you do it without breaking them?
I'll download oos 10.3 zip and try again.
Update, nevermind, seemingly twrp is struggling with it's things.. maybe it is encryption, tho i seem to be un encrypted, not sure..
Anyway root was achieved for me with the magisk image modding method.
Well, a lot of people wanting to root global miui 11.0.7 and not being able to... So I did it on my Global redmi 7a - MIUI 11.0.7 Global.
Simple though. Apart from whats being said, u can update Magisk to v20.+ after flashing
the 19 version, through the app Magisk Manager automatically installed after flashing.
Prerequisites & Downloads:
- Your bootloader must be unlocked (https://en.miui.com/unlock/)
- ADB and Fastboot -> I did on windows version, maybe can be done on linux...
- patched boot.img for miui 11.0.7 global
- vbmeta.img
- Magisk v19.3 zip -> place it on the root of your external sdcard
This is basically copied from cg730620's post [Guide][Redmi 7A] TWRP, Root with Magisk, Custom ROM [GSI][Pie] and Avedroid's vid
1 - Unlock bootloader and flash stock miui 11.0.7 recovery rom, using miflash 2017
CAREFUL! On the lower right corner check the first option, "clean all", or you may end up with a locked bootloader.
-> exactly the same from the quoted post from now on, what differs is the files and we are only flashing magisk v19.3
"2. Install Minimal ADB and Fastboot
3. Rename patched boot file to boot.img
4. Rename custom recovery file to recovery.img
5. Place boot.img, recovery.img, vbmeta.img in Program Files (x86)/Minimal ADB and Fastboot/ folder
6. Turn off your phone.
7. Reboot phone to fastboot mode by holding Volume-down button while pressing On/Off-button. You know you are in fastboot mode when you see a cartoon bunny.
8. Connect the phone to your PC via USB.
9. On your PC open command prompt and nagivate to ADB folder, or open command prompt window directly from right-click menu in ADB folder; just right-click on empty space and choose 'Open command prompt here'
10. In command prompt, enter the following commands:
Code:
Code:
fastboot flash boot boot.img
Code:
Code:
fastboot flash vbmeta vbmeta.img
Code:
Code:
fastboot flash recovery recovery.img
11. Now reboot to recovery: Press Volume-Up button on your phone and enter the following in command prompt:
or just turn off the phone and reboot by holding Volume-Up and On/Off button (release On/Off when phone turns on, keep holding Volume-Up until you see screen of TWRP recovery)
12. Swipe to allow modifications. If TWRP asks for PIN, enter the PIN code you set for your unlock screen.
13. In TWRP choose Wipe > Advanced Wipe. Select 'Dalvik / ART cache', 'System', 'Data', 'Cache'. Then Swipe to Wipe.
18. In TWRP choose Install. Select the Magisk zip-file on your phone and then Swipe to confirm flash.
Reboot to system, open Magisk, update and there u go.
Same steps of the beginning of Avedroid's video, only with modified boot.img and Magisk Version
https://www.youtube.com/watch?v=NSs08O6uGVI&t=324s
After 16:30 of the video he flashes a custom gsi rom which is not of the interest of this thread, just flash magisk.
Thanks to all who made it possible, especially Avedroid and cg730620
Post questions and answers here, please, NOT in PM.
Good luck!
Thank's it's work fine on custom gsi too, i just flash patch boot, vbmeta, finally install magisk success
I did everything right, however, when it came to installing Magisk, the following error occurred: "Updater process ended with ERROR: 1".
So I redid the whole process, but before installing Magisk I did the following: I went to Mount, I deselected the System partition and after that the installation proceeded normally.
Well, I don’t know if this is the best way to fix this problem, I don’t understand much of these things, but it ended up working for me.
Thanks for the post
I will do some tests to see if everything is working.
Can I just do this on MIUI 11.0.5 Global?
Omborkar said:
Can I just do this on MIUI 11.0.5 Global?
Click to expand...
Click to collapse
Download patched boot.img for ur rom instead of 11.0.7 boot.img I uploaded. Or patch it yourself.
I have a problem. Everytime I do the wipe it says only: "Failed to mount "vendor"(invalid argument)"
What to do?
Google play not certified... after flashing and installed magisk... Got solution??? Thanks
I've rooted my MoKee OS Android 10 rom. Can somebody help me change the system font? The font changer module in Magisk is not appearing in the search bar.
vincecabalan said:
I've rooted my MoKee OS Android 10 rom. Can somebody help me change the system font? The font changer module in Magisk is not appearing in the search bar.
Click to expand...
Click to collapse
I Tried To Root Mokee But Failed. Can You Please Tell Me How You Root Mokee
Hello, what files do I need to rename to boot.img and recovery.img? I'm lost
3. Rename the patched boot file to boot.img
4. Rename the custom recovery to recovery.img
RsAbubokor4 said:
I Tried To Root Mokee But Failed. Can You Please Tell Me How You Root Mokee
Click to expand...
Click to collapse
Extract boot.img of installer mokee.zip Patch boot image https://patcher.yaalex.xyz/ select include magisk Expect to do uploud after downloading rename boot.img sdcard Go twrp flash boot install magisk manager apk
Credit to @idcamper
vincecabalan said:
Extract boot.img of installer mokee.zip Patch boot image https://patcher.yaalex.xyz/ select include magisk Expect to do uploud after downloading rename boot.img sdcard Go twrp flash boot install magisk manager apk
Credit to @idcamper
Click to expand...
Click to collapse
I did according to this advice, uploaded boot.img to this site. Magisk works, but Wifi won't work . When I uploaded boot.img, Wifi works, then it shows that Magisk is not installed, but it was installed.
speed_cars said:
I did according to this advice, uploaded boot.img to this site. Magisk works, but Wifi won't work . When I uploaded boot.img, Wifi works, then it shows that Magisk is not installed, but it was installed.
Click to expand...
Click to collapse
try this process after flash zip of the last magisk from reset factory
Can i do this on miui 11.0.3.0 indian rom based on Android 10. If yes then i need recovery.img pls help.
4. Rename custom recovery file to recovery.img
- where i can download this?, or this is the outcome of step 1?
Everything works fine, exept password. When i set new password, let's say it is 1234, i set the password in the setting, then i press the power button for lock screen, i put the password in as usual, but it just says try again over and over, im pretty sure that it is not my fault. Thanks for reply.
Anyone have patched boot 11.0.4?
jurubebaamarga said:
Well, a lot of people wanting to root global miui 11.0.7 and not being able to... So I did it on my Global redmi 7a - MIUI 11.0.7 Global.
Simple though. Apart from whats being said, u can update Magisk to v20.+ after flashing
the 19 version, through the app Magisk Manager automatically installed after flashing.
Prerequisites & Downloads:
- Your bootloader must be unlocked (https://en.miui.com/unlock/)
- ADB and Fastboot -> I did on windows version, maybe can be done on linux...
- patched boot.img for miui 11.0.7 global
- vbmeta.img
- Magisk v19.3 zip -> place it on the root of your external sdcard
This is basically copied from cg730620's post [Guide][Redmi 7A] TWRP, Root with Magisk, Custom ROM [GSI][Pie] and Avedroid's vid
1 - Unlock bootloader and flash stock miui 11.0.7 recovery rom, using miflash 2017
CAREFUL! On the lower right corner check the first option, "clean all", or you may end up with a locked bootloader.
-> exactly the same from the quoted post from now on, what differs is the files and we are only flashing magisk v19.3
"2. Install Minimal ADB and Fastboot
3. Rename patched boot file to boot.img
4. Rename custom recovery file to recovery.img
5. Place boot.img, recovery.img, vbmeta.img in Program Files (x86)/Minimal ADB and Fastboot/ folder
6. Turn off your phone.
7. Reboot phone to fastboot mode by holding Volume-down button while pressing On/Off-button. You know you are in fastboot mode when you see a cartoon bunny.
8. Connect the phone to your PC via USB.
9. On your PC open command prompt and nagivate to ADB folder, or open command prompt window directly from right-click menu in ADB folder; just right-click on empty space and choose 'Open command prompt here'
10. In command prompt, enter the following commands:
Code:
Code:
fastboot flash boot boot.img
Code:
Code:
fastboot flash vbmeta vbmeta.img
Code:
Code:
fastboot flash recovery recovery.img
11. Now reboot to recovery: Press Volume-Up button on your phone and enter the following in command prompt:
or just turn off the phone and reboot by holding Volume-Up and On/Off button (release On/Off when phone turns on, keep holding Volume-Up until you see screen of TWRP recovery)
12. Swipe to allow modifications. If TWRP asks for PIN, enter the PIN code you set for your unlock screen.
13. In TWRP choose Wipe > Advanced Wipe. Select 'Dalvik / ART cache', 'System', 'Data', 'Cache'. Then Swipe to Wipe.
18. In TWRP choose Install. Select the Magisk zip-file on your phone and then Swipe to confirm flash.
Reboot to system, open Magisk, update and there u go.
Same steps of the beginning of Avedroid's video, only with modified boot.img and Magisk Version
After 16:30 of the video he flashes a custom gsi rom which is not of the interest of this thread, just flash magisk.
Thanks to all who made it possible, especially Avedroid and cg730620
Post questions and answers here, please, NOT in PM.
Good luck!
Click to expand...
Click to collapse
I wish to obtain root / access to magisk,
Wanting to know if I can do this without losing data (having to delete system data)
Thank you
Hello.
So I was trying to root my Redmi 7A - v10.2.1 with TWRP 3.3.1 but now I am stuck in a bootloop.
What I did:
1. Flash boot.img
2. Flash recovery.img
3. Flash vbmeta.img
4. reboot
Phone rebooted to system and TWRP was installed.
Then I booted to TWRP to install Magisk-v23.0.zip,
I went to Advanced Wipe, then wiped 'Dalvik / ART cache', 'System', 'Data', 'Cache'.
When I rebooted, it went into a bootloop, when I go to TWRP it says 'No OS INSTALLED".
What did I do wrong? And how to recover?
Thanks.
Cinox said:
I did everything right, however, when it came to installing Magisk, the following error occurred: "Updater process ended with ERROR: 1".
So I redid the whole process, but before installing Magisk I did the following: I went to Mount, I deselected the System partition and after that the installation proceeded normally.
Well, I don’t know if this is the best way to fix this problem, I don’t understand much of these things, but it ended up working for me.
Thanks for the post
I will do some tests to see if everything is working.
Click to expand...
Click to collapse
Im also getting the same error,, but what do you mean by "deselected the System partition". I see "system_root" in Mount but not "System"
Welcome to my thread. Today I am going to teach you how to install a custom recovery on the device and how to recover the original boot files on the phone to modify them. After modifying those files you will have root on the device. A lot of time and effort has been put into getting this to work. The custom recovery that we will be using is TWRP Recovery.
Note: Modifying your device will void the manufacturer's warranty.
All modifications made to your device are done at your own risk and you claim full
responsibility if the device is damaged or if data is lost.
First, we are going to enable OEM Unlock and USB Debugging. To do so, you will follow the steps below.
1. Sign in to your Mi Cloud Account on your phone.
2. Tap the “Settings” menu on your Mi 11 Ultra, then tap the “About Phone” option.
3. Tap the “MIUI Version” option several times until you see the “You are now a developer” message.
4. Tap the “Additional Settings” Menu, then tap the “Developer options” on your phone.
5. Activate the “OEM Unlock” option, then activate the “USB Debugging” option on your phone.
6. Tap the “Mi Unlock Status” option.
7. Tap “Agree” and then tap the “Add account and device” option on your phone.
8. Turn off your phone, then press the volume down button and the power button simultaneously to put your phone into fastboot mode.
9. Connect your phone to your PC via a USB cable.
10. Download the miflash ZIP file.
11. Extract the miflash unlock tool ZIP file. You will find the Mi USB Driver.exe file and the miflashunlock.exe file after extracting it.
12. Install the Mi USB driver on your PC.
13. Run the miflashunlock.exe file on your PC.
14. Tap the Agree button and then Sign in with your Mi Account after running the miflash_unlock.exe.
15. Click the “Unlock” button, then click the “Unlock anyway” button within the miflash tool to start the process.
16. Click the “Reboot phone” button after you see the “Unlocked successfully” message.
Downloads:
Unlock tool: https://en.miui.com/unlock/download_en.html
Additionally, we will need to have TWRP flashed to the recovery of the phone.
1. We will need to have ADB installed on the computer so download the 15 Second ADB Installer.
2. Run the ADB-Setup.exe.
3. Open a CMD terminal as an Administrator.
4. Type in the command: CD C:/ADB.
5. Type in the command: ADB Devices, make sure that there is a device showing up.
6. Download the TWRP.img to the ADB folder located on C:/ADB.
7. Make sure that you do not have a password or code lock on the device. There can not be any lock on the lock screen.
8. Type the command ADB Reboot Bootloader.
9. Type the command Fastboot Boot TWRP.img.
10. Navigate to the Advanced menu of TWRP and tap on “Install Recovery Ramdisk”.
11. Navigate back to the main menu then tap on Reboot and tap on Recovery.
Downloads:
15 Second ADB Installer: https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
TWRP image: https://drive.google.com/drive/folders/1ztP266XjxteVk8pxcD7-sD-IxihmODPV?usp=sharing
Now we will copy the three boot files on the phone and make backups.
1. Navigate to Mount on the root menu or TWRP.
2. Select the System Partition and Data partition then go back to the menu.
3. Navigate to Advanced then Terminal.
4. Type the command dd if=/dev/block/bootdevice/by-name/boot of=/sdcard/boot.img.
5. Type the command dd if=/dev/block/bootdevice/by-name/boot_a of=/sdcard/boot_a.img.
6. Type the command dd if=/dev/block/bootdevice/by-name/boot_b of=/sdcard/boot_b.img.
7. After all the commands have been entered you can now exit back to the system by rebooting to the system in the Reboot menu.
8. Next, we will install Magisk on the phone to modify the boot files, download the Magisk.apk file on your phone.
9. Open the apk and install the Magisk.apk on the device. You will have to enable Unknown Sources if you have not already.
10. Open Magisk and select install on the Magisk tab.
11. Under Method tap the Select and Patch a File and select the boot.img file.
12. Press the LET'S GO button after you have selected the file. (Make sure to note down the name of the Output file for each file).
13. Repeat steps 11 and 12 for boot file boot_a.img and boot file boot_b.img.
Downloads:
Magisk: https://github.com/topjohnwu/Magisk/releases
Now we will flash the boot files to the phone and we will be rooted!
1. Copy the files you just made from the storage of the phone under /Internal shared storage/Download/(Filenames) to the ADB folder located on C:/ADB
2. Restart the phone and once the phone screen turns off hold the Volume Down button to boot into fastboot.
3. Now this is where it is very crucial to ensure you know what each file corresponds to for the boot files. Type in the command Fastboot flash boot (Modified file name for boot.img).
4. Type in the command Fastboot Flash Boot_a (Modified file name for boot_a.img).
5. Type in the command Fastboot Flash Boot_b (Modified file name for boot_b.img).
6. Then type the command Fastboot reboot
7. Load Magisk and verify that it is indeed installed.
8. Boom rooted!
I don't get this I rooted much easier by simply flashing magisk.
I downloaded magisk zip
I then booted into fastboot connecting my ohone to the pc
I booted into twrp from fastboot with the command "fastboot boot twrp.img"
From twrp I simply flashed magisk.zip wiped dalvik and ART cache and rebooted the phone
Root done!
My question is now how can I update without loosing data.
I was thinking of installing the new rom via miflashtool without wiping data and then reflash magisk. It should work right?
xNAPx said:
I don't get this I rooted much easier by simply flashing magisk.
I downloaded magisk zip
I then booted into fastboot connecting my ohone to the pc
I booted into twrp from fastboot with the command "fastboot boot twrp.img"
From twrp I simply flashed magisk.zip wiped dalvik and ART cache and rebooted the phone
Root done!
My question is now how can I update without loosing data.
I was thinking of installing the new rom via miflashtool without wiping data and then reflash magisk. It should work right?
Click to expand...
Click to collapse
In my testing I couldn't get my phone to root with Magisk. I haven't tested that but it sounds like it should work.
Look it is super simple, it can be done on every rom with an unlocked bootloader (this must be obvious)
Download the latest magisk.zip file on your phone
Download the compatible TWRP for your device on your computer and put it into your ADB and fastboot folder and rename it "twrp.img" (make sure you replace the file extension with the ".img")
Reboot your phone into fastboot
Connect the phone to the PC
Run the check command "fastboot devices" to check if your device is listed
Then run the command "fastboot boot twrp.img"
Your phone will now boot into twrp recovery and there is no need to flash it and overwrite the original recovery
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Now since the twrp is chinese you must change your language into english (3rd button on the right then click on the globe on the up right and select the language you want)
Now go into wipe and wipe manually cache and dalvik
Now go into your system and search for magisk.zip, flash it and wipe again dalvik and cache.
Reboot your phone
Now when you boot you must have magisk through your apps, boot magisk and complete the installation process.
Reboot again and enjoy!
xNAPx said:
Look it is super simple, it can be done on every rom with an unlocked bootloader (this must be obvious)
Download the latest magisk.zip file on your phone
Download the compatible TWRP for your device on your computer and put it into your ADB and fastboot folder and rename it "twrp.img" (make sure you replace the file extension with the ".img")
Reboot your phone into fastboot
Connect the phone to the PC
Run the check command "fastboot devices" to check if your device is listed
Then run the command "fastboot boot twrp.img"
Your phone will now boot into twrp recovery and there is no need to flash it and overwrite the original recovery
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Now since the twrp is chinese you must change your language into english (3rd button on the right then click on the globe on the up right and select the language you want)
Now go into wipe and wipe manually cache and dalvik
Now go into your system and search for magisk.zip, flash it and wipe again dalvik and cache.
Reboot your phone
Now when you boot you must have magisk through your apps, boot magisk and complete the installation process.
Reboot again and enjoy!
Click to expand...
Click to collapse
is this working with EU ROM?
penyapu79 said:
is this working with EU ROM?
Click to expand...
Click to collapse
On Xiaomi EU is simpler because it inject twrp itself so you don't need to push start via adb
xNAPx said:
On Xiaomi EU is simpler because it inject twrp itself so you don't need to push start via adb
Click to expand...
Click to collapse
Ok thanks. I will try it later
On Xiaomi EU you can straight flash the update, wipe dalvik and cache and flash straight away magisk zip on top, rewipe dalvik and cache and reboot to system
xNAPx said:
On Xiaomi EU you can straight flash the update, wipe dalvik and cache and flash straight away magisk zip on top, rewipe dalvik and cache and reboot to system
Click to expand...
Click to collapse
any problem with bank apps after root?
I'm on official global ROM and I am using revolut with no issues
xNAPx said:
I'm on official global ROM and I am using revolut with no issues
Click to expand...
Click to collapse
I have the Chinese ultra with global rom but if I decide to sale how do I factory reset to do so? thanks ahead and wasn't sure where to post this.
If you want to sell it you must reinstall the original Chinese ROM and relock the bootloader
xNAPx said:
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Click to expand...
Click to collapse
Hi, xNAPx !
Thank you for this tuto, but i have a problem :/
At this step, twrp is booting straight on the menu, no password asked, and so, no access to data :/
Do you have an idea please ?
(i'm using xiaomi.eu_multi_MI11Pro_MI11Ultra_21.12.8_v12-12-fastboot)
I believe this is a known issue, there is a problem on some versions of twrp with encryption, to me never happened. What kind of screen security do you have on your phone?
xNAPx said:
I believe this is a known issue, there is a problem on some versions of twrp with encryption, to me never happened. What kind of screen security do you have on your phone?
Click to expand...
Click to collapse
A password
You can try 2 things, remove the screen lock protection or inject a different version of twrp, I never had this problem as I boot twrp via adb
xNAPx said:
You can try 2 things, remove the screen lock protection or inject a different version of twrp, I never had this problem as I boot twrp via adb
Click to expand...
Click to collapse
Thank you
Removal of the screen lock resulted as a failure too (same problem than with the screen lock)
I don't know and can't seem to find another twrp for the mi11 Ultra than this one :
Mi11Ultra(Pro)-twrp3.5.1-recovery-21.5.9-decrypted.img | by Orjon for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Sorry :/
Push it via adb then, in the shell type:
Fastboot boot twrp.img
xNAPx said:
Push it via adb then, in the shell type:
Fastboot boot twrp.img
Click to expand...
Click to collapse
That's what i'm doing from the beginning, but it doesn't work
What does not work in specific? It's a bit too generic