Hi all, my daughter has. Motorola Droid Turbo. She was at her Bowling league this morning, her phone was sitting on the table. She picked it up & the screen was black, except for about 1/8" at the bottom of the screen. You can see the top of her wallpaper. Any ideas as to what happened to it would be greatly appreciated.
Has she tried rebooting it? And if so, can you see a full screen with the boot images? If she can, maybe try doing a cache wipe in recovery or factory reset. If she can't see a full screen, then chances are, the LCD is toast.
It is possible the phone got knocked off the table and no one told her. You can try opening it up and checking the contacts for the LCD in case it got knocked loose.
Related
About a month ago I got my Kaiser screen replaced as it was broken, now all of a sudden the screen is all whitish and I can hardly ready whats on it!
Is the screen broken again??
I'm fixing to replace the screen in a Kaiser i bought used with a broken screen. From the reading i've done, it sounds like one of the cables to the screen is loose. Trying pressing on the middle of your keyboard and see if anything happens. The big ribbon cable has a connector there.
hmmmm coming to think of it when I pressed the middle of the screen it used to do some funny effect (like when you press your TFT monitor) but now nothing happens!
Is your screen something like this?
jrask said:
Is your screen something like this?
Click to expand...
Click to collapse
last night i was woken up by a text, i looked at my phone and all of a sudden the screen went crazy. Started scrolling up and down (like a bad signal/wrong format ntsc/pal on a tv). Everything got all messed up and lines and dashes all over, kinda like your screen, it started acting wierder when i began applying pressure on the top of the device by the earpiece and d-pad. So i soft-reset the device and it was still doing it while boot up, leading me to believe it wasn't a software issue.
So in my half awake state i just left it on my nightstand. I woke up and its perfectly fine now, even when i press all around the screen.. wierd huh?
I didn't notice anything like you descriped, touch screen and everything else worked like before. Only the colors were like on the picture. Tried hard reseting but didn't help. Phone is still under warranty so sent it to be repaired, i can post what they did when i get it back.
Thanks jrask. Thats exactly how it looks.
I think i have some bad news for you, the screen was damaged and needed to be replaced. I think it was cracked under the frame.
My tilt is acting very nasty lately. Over the past few weeks, I noticed that when I turned on the display, occasionally I would get something that looked like the static that you see on TV, but with colors. I would just turn off the screen, and turn it back on to clear it.
Now it's gotten worst! 98% of the time, it intermitantly gives me a blank solid white screen when I turn it on. Occasionally I can just turn to screen off, and on to reset it.
I'm running OEM WM6.1, and I've tried to reinstall the OS, but it didn't help. My phone has taken a beating, and the top corner has had a small crack in it over the past 2 months, but it didn't effect the touch screen, or picture. I also took off the cover to make sure the cables were all snug, and it didn't help.
Any suggestions?
Something got corrupted. If you search WIKI, it's call the 3 color screen stuck .. and you're better off posting at thread below. I hope someone can give you help (if you follow those steps and still no good)
As rule of thumb, do a lot of reading first
http://forum.xda-developers.com/showthread.php?t=423486
On a second thought, it might be the LCD itself broken ..
Oh, believe me.. I'm not one to turn to the forums without doing research myself! All the research I was coming up with seemed to point to a slightly different WSOD though. I think you are right about the screen being broken. I've reinstalled the software, and it acts up even when booting up!
Unfortunately, I'm not impressed with ANYTHING on the market to date! If I'm unable to fix this, I'll just go back to a RAZR until the next gen WM7 phones come out. (With a tilt screen of course!!)
Oh, and even though the screen goes white, it's not stuck, as it fully boots up; I can hear sounds, and even activate the touch screen.
Also, I forgot to mention.. the first problem I started experiencing was that my tilt would go back from landscape mode! It was like the video board was crapping out. I could even see a slight flicker in the display from the refresh rate.
hi i think you may need a new Need a new flex cable ribbon as i had the same problem once
Thanks Tayzaa, I think you could be on to something. I'll open it up and take another look!
Hi!
is this problem solved?
WSOD is bug of Hermes. I would know if kaiser have the same WSOD-bug with D-pad?
I have been given a captivate from a friend who said he dropped it in the toilet, it turned off when he grabbed it.
He said he stuck it in a bowl of rice over night after removing the battery.
First thing i did was wipe it, odin came back a full success no errors.
When i boot it i see the at&t thing & the little 3g fly by, but the screen is all cloudy. Once its booted up i see the screen locked deal and i can swipe it to unlock and and even change the pages. After a few seconds i will notice the screen starting to fade to black, all this time still being cloudy. If i manually turn the screen off with the power button for a couple minutes, i am able to turn it back on and see the cloudy screen again.
My questions are these.
Seems to me the LCD is messed up, Can i just replace the LCD?
How do i know if anything else is damaged?
Ive read about the battery indicators, both of which are still white.
ive already taken it apart , "comfortable when its a free phone", and notice a slight burn mark from a resistor on the LCD to the metal shielding that it is pressed up against.
Any ideas would be helpful.
SRobby said:
I have been given a captivate from a friend who said he dropped it in the toilet, it turned off when he grabbed it.
He said he stuck it in a bowl of rice over night after removing the battery.
First thing i did was wipe it, odin came back a full success no errors.
When i boot it i see the at&t thing & the little 3g fly by, but the screen is all cloudy. Once its booted up i see the screen locked deal and i can swipe it to unlock and and even change the pages. After a few seconds i will notice the screen starting to fade to black, all this time still being cloudy. If i manually turn the screen off with the power button for a couple minutes, i am able to turn it back on and see the cloudy screen again.
My questions are these.
Seems to me the LCD is messed up, Can i just replace the LCD?
How do i know if anything else is damaged?
Ive read about the battery indicators, both of which are still white.
ive already taken it apart , "comfortable when its a free phone", and notice a slight burn mark from a resistor on the LCD to the metal shielding that it is pressed up against.
Any ideas would be helpful.
Click to expand...
Click to collapse
To test whether all the sensors, vibration, touch screen, LED colors, magnetic sensors works properly, install and use SGS Tools..
There are lot of tests and testing modes available there.. hope this helps
My Droid's touch screen isn't working in the center vertically all the way down. I can still use the 'edges' of the screen. I need to use the middle of the screen for a few things (not transfering stuff over). Is there any way I can 'project' my Droids screen to my computer and click/touch in it to use it?
Thanks in advance for all help. It's appreciated
~mfungah
Edit: This is the original Motorola Droid.
I have the same problem on the right side of my milestone :S
I had the same problem, but from the back arrow upwards, specially when the phone got hot. As my phone was still on the warranty period, I flashed it back to stock and updated it to the official 2.2., took it to an Orange shop and got it back after almost a month: they basically changed the whole top part of the phone (I got a brand new screen )
Repair problem
I had a same failure. The touch panel was bad. I ordered one from eBay. It also came as well put it. It works well. Only so much wrong with me that for some reason the phone stacked in landscape mode, I can't change to portrait mode. What is wrong? I put together something wrong? I do not think so. Everything else goes. (or so it seems)
This has to do with the digitizer (the glass you touch over the top of the LCD you see) being defective or unsealed. This is due to environmental moisture finding its way into the phone and f**king with the electrictal signals sent by touching the screen. There is a 'phantom touch' issue that seems to happen before or during the vertical unresponsiveness, and that can usually be temporarily remedied by firmly pushing your screen downwards (your phone may restart) and taking a blowdryer to your phone until it's just hot enough to be uncomfortable to hold (and no longer take it into the bathroom while you shower). One way or another, you're going to have to replace your digitizer eventually.
Sent from my Droid using XDA App
I had the same problem months ago but it's now fixed.
STEPS:
1. Digitizer I bought from this guy:
http://cgi.ebay.ph/New-Touch-Screen-Digitizer-Motorola-Milestone-A853-/270780531 891?pt=UK_Replacement_Parts_Tools&hash=item3f0bc704b3#ht_2811wt_850
2. Dissasembly Videos (I advice you to watch them repeatedly before dissasembly):
http://www.youtube.com/watch?v=6d7ETMfgq2s
http://www.youtube.com/watch?v=dE81IaQHEHc
3. Phillips screw driver( for dealing with hard screws around the screen): Because I don't want you to use the low quality screw driver supplied with the digitizer.
4. Double sided tape: I got mine from a hardware shop for only P19. Buy a the more expensive tape(P100+) but look for a very thin one! You will use the cheap weak tape to stick some internal parts and use the Hard tape to stick the external casing. EDIT: I just used the cheap one for everything and it's strong enough.
5. PATIENCE: Don't be in a hurry. I even paused from time to time to get a better idea about what to do next. Get the feel of being a perfectionist (that same additude when I applied a screen protector )
That's the guide from me who haven't dissasembled a phone in my entire life but my milestone. So if something bad and technical that happens along the way then my knowledge can't help.. sorry.
Good luck bro!!
So my Screen broke and I bought a new one so I could replace it, the touch screen/digitizer didn't break though... at first the colors just started washing and fading untill the screen ended up completely dark, I could still use the touch screen and feel when I would unlock it, after a day the phone would not give me any feed back by vibrating or turning the orange light while charging, so I dismantled it using some tips from these videos:
http://www.youtube.com/watch?v=Hhj8Xs9vAyg
http://www.youtube.com/watch?v=hTRXSMQ-GJY&feature=related
After I put everything back together the phone is giving me feedback again and I can notice its charging because of the orange light, but the screen won't turn on. Does any one know if I might need to do something on the software side? like needing to re install anything? or do you think I just got a bad screen?
Update: I just took it apart again and reconnected the ribbons, its back together and the screen still won't turn on.
You have the AMOLED screen and not the LCD?
Did you compare the #'s on the old and new to see you got the right part?
Cables are the same, they look the same, part # and stickers are different...
What are the part numbers on your new and old screen? I just went through the same thing, but I'm fairly sure I got the wrong screen replacement. Will have to look more into it later tonight.
My screen wont turn on at all. I was so excited to get my N1 back in action as well.