Removed
Which TWRP did you try flashing? Official or modified one?
Try with modified 3.0.2-22, if you haven't yet.
Sent from my OnePlus 3 using Tapatalk
Thanks for the reply.
Flashed modified 3.0.2-22 before flashing new CE build.
Post corrupting recovery partition, tried flashing back the same recovery...resulting in blackscreen tho.
Explorer23 said:
Which TWRP did you try flashing? Official or modified one?
Try with modified 3.0.2-22, if you haven't yet.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
Did you try mega unbrick guide?
Sent from my ONEPLUS A3000 using Tapatalk
yes, tried with MSMDownloadTool from that post, since the device isn't in Qualcomm diagnostic mode, that didn't help much.
Explorer23 said:
Which TWRP did you try flashing? Official or modified one?
Try with modified 3.0.2-22, if you haven't yet.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
tdamocles said:
Did you try mega unbrick guide?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
I'm facing almost same situation, haven't flashed wrong twrp, have tried 3.0.2.22 and screwed up...not able to flash any other twrp. Have side loaded OOS 3.5.5 and rebooted to get official recovery and succeeded as well but as soon as have flashed official twrp resulting black screen. Again flashed 3.0.2.22 through fastboot mode and working... In short, I can't use any recovery other then 3.0.2.22. Any guidance and help would be highly appreciated....
Sent from Tapatalk
I also use .22 recovery and no problem. The problem is not the recovery, its a noob problem.
indeed that seems to be the problem here.
Tried flashing modified recovery again (-22), successfully booted into recovery now.
What's causing this issue, any pointers guys ?
can't go back to official twrp for some reason.
deeplyyoung said:
I'm facing almost same situation, haven't flashed wrong twrp, have tried 3.0.2.22 and screwed up...not able to flash any other twrp. Have side loaded OOS 3.5.5 and rebooted to get official recovery and succeeded as well but as soon as have flashed official twrp resulting black screen. Again flashed 3.0.2.22 through fastboot mode and working... In short, I can't use any recovery other then 3.0.2.22. Any guidance and help would be highly appreciated....
Sent from Tapatalk
Click to expand...
Click to collapse
Well technically we should be able to get back to official recovery.
Care to explain the "noob" problem mate ?
Schrotty35 said:
I also use .22 recovery and no problem. The problem is not the recovery, its a noob problem.
Click to expand...
Click to collapse
Schrotty35 said:
I also use .22 recovery and no problem. The problem is not the recovery, its a noob problem.
Click to expand...
Click to collapse
Well accepted its noob problem, appreciating if you help us, instead of pointing noob @#$%.
Want to use multiROM but not able to flash any other recovery.
Any other way to hard reset the device which fixed recovery partitions (I'm sure we messed with partitions).
Edit: even I'm using 3.0.2.22 without any issues but if I want to use any other recovery(official twrp or multiROM twrp, not able to boot into it, truly noob thing as per your post)
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
deeplyyoung said:
I'm facing almost same situation, haven't flashed wrong twrp, have tried 3.0.2.22 and screwed up...not able to flash any other twrp. Have side loaded OOS 3.5.5 and rebooted to get official recovery and succeeded as well but as soon as have flashed official twrp resulting black screen. Again flashed 3.0.2.22 through fastboot mode and working... In short, I can't use any recovery other then 3.0.2.22. Any guidance and help would be highly appreciated....
Sent from Tapatalk
Click to expand...
Click to collapse
I'm trying to get stock recovery I have modified twrp but whenever I flash the cb full zip twrp doesn't get overwritten
To Reproduce the issue.
1. Flash modified TWRP (-22) version via fastboot
2. Flash CE ROM latest 3.5.5 from recovery
3. Reboot into system, successfully booted.
4. Tried flashing official TWRP, results in Blackscreen (in my case flashed incorrect TWRP, then flashed official one)
5. flashing back (-22) version of TWRP, recovery seems working...however if one wants to switch to official or MultiRom's TWRP, results in Blackscreen.
Hope this gives detailed understanding
Edit:
Gonna try the same with 3.2.7 OOS. Thanks Mate
Explorer23 said:
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
Explorer23 said:
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
thanks Buddy, appreciated your help, gonna try this ASAP & will revert with results.
not able to get full zip of 3.2.7, trying with 3.2.6
Yeah, flashing full stock oos might do the trick, there's something related to firmware, it's a long story to understand and I'm not fully getting it, anyway, flash the full stock, boot it up, your device may get encrypted again and then flash the official twrp via fastboot, don't use flashify
I'll try to keep an eye out here rather than on the multi-boot thread
Sent from my Darkside of Oneplus 3
power off phone, keep pressed vol-up+vol-down and connect usb cable, phone will enter qualcomm download mode, then flash with MSM Download Tool.
Explorer23 said:
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
xanthrax said:
Yeah, flashing full stock oos might do the trick, there's something related to firmware, it's a long story to understand and I'm not fully getting it, anyway, flash the full stock, boot it up, your device may get encrypted again and then flash the official twrp via fastboot, don't use flashify
I'll try to keep an eye out here rather than on the multi-boot thread
Sent from my Darkside of Oneplus 3
Click to expand...
Click to collapse
Yesssss!! Trick worked, have flashed FULL zip OnePlus3Oxygen_16_OTA_015_all_1609141252_c38077177cfc4e74 over OnePlus3Oxygen_16_OTA_007_all_1610310039_bc5bc09fd9af4ceb with stock recovery, device encrypted again but no issues, then fastboot official TWRP worked & then fastboot MRTWRP worked....
now my Question:- pls help, enable us to get some knowledge
I want to use MultiROM, so decryption procedure will do.
1} if i again flash OnePlus 3 OxygenOS 3.5.5 Community Build as primary using MultiROM twrp, is it gonna work?
2} I want to use DU(MM), PAC-MAN(MM), exodus, MIUI, aicp (7.1) or HydrogenOS H2OS whats the best possibilities & way.
3} which one can be use as primary
4} can i flash FreedomOS CE 1.10 [OOS 3.5.5 CB] using multiROM twrp as primary?
5} can I swap FreedomOS CE 1.10 [OOS 3.5.5 CB] as secondary & flash HydrogenOS H2OS as primary?
Related
I don't know what problem is this. Here is the link https://youtu.be/gvcj1V8XQwo I posters it in YouTube because it is quite hard to explain. I think no one has occur this problem. Any ideas how to fix it?
One plus 3 china a3000
Flash official twrp from one plus website
Successfully unlock bootloader
Install official op3 oxygen os
Successfully flash twrp official by one plus website
try flashing official recovery and sideload the full latest OOS.
angdaminaman said:
try flashing official recovery and sideload the full latest OOS.
Click to expand...
Click to collapse
What is OOS btw. What is OTA?? How do I flash the OOS? I had install twrp official by one plus website sorry I still a newbie. Btw I had tried using adb side load it also stuck halfway.
Abraham tan said:
What is OOS btw. What is OTA?? How do I flash the OOS? I had install twrp official by one plus website sorry I still a newbie. Btw I had tried using adb side load it also stuck halfway.
Click to expand...
Click to collapse
oxygen os for OOS, then over the air update for ota.. twrp official by oneplus ?? oneplus would not provide twrp.. they will only provide their own stock recovery..
edit:
my bad. they supplied twrp on their website. lol.
reyscott said:
oxygen os for OOS, then over the air update for ota.. twrp official by oneplus ?? oneplus would not provide twrp.. they will only provide their own stock recovery..
edit:
my bad. they supplied twrp on their website. lol.
Click to expand...
Click to collapse
Idk what u mean. I still a newbie. Can I give me more detail on how? I had tried install oxygen os official by one plus it is still the same problem.
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Sent from my ONEPLUS A3000
fiepi said:
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Sent from my ONEPLUS A3000
Click to expand...
Click to collapse
So this assume that my one plus 3 hardware problem or hard brick ?
Abraham tan said:
So this assume that my one plus 3 hardware problem or hard brick ?
Click to expand...
Click to collapse
i just restored mine using twrp and it worked for me.. try to check with oneplus customer support
reflash the original oneplus recovery, not twrp, thru fastboot.
download the full oxygen os in your pc. the sideload it thru your pc via original oxygen recovery.
angdaminaman said:
reflash the original oneplus recovery, not twrp, thru fastboot.
download the full oxygen os in your pc. the sideload it thru your pc via original oxygen recovery.
Click to expand...
Click to collapse
what i did on mine was to flash official 3.2.6 and never thought that it would work. but it did.. and then after booting up, i flash the stock oneplus recovery on twrp then updated my phone with the 3.2.7 ota..
reyscott said:
what i did on mine was to flash official 3.2.6 and never thought that it would work. but it did.. and then after booting up, i flash the stock oneplus recovery on twrp then updated my phone with the 3.2.7 ota..
Click to expand...
Click to collapse
thats good sir.
i have china version op3 as well. what i did to flash OOS is just sideload thru stock recovery. i didnt even need to unlock bootloader. since they are both official OS.
so that might work for the original poster. just use stock recovery and adb sideload OOS
angdaminaman said:
thats good sir.
i have china version op3 as well. what i did to flash OOS is just sideload thru stock recovery. i didnt even need to unlock bootloader. since they are both official OS.
so that might work for the original poster. just use stock recovery and adb sideload OOS
Click to expand...
Click to collapse
Btw what is OOS how do I flash it?
Abraham tan said:
Btw what is OOS how do I flash it?
Click to expand...
Click to collapse
OOS is OxygenOS.......
Abraham tan said:
Btw what is OOS how do I flash it?
Click to expand...
Click to collapse
aassuming you know all the basics and you have computers around you, especially windows os.
1. download everything (latest full oxygen os zip found in downloads.oneplus.net, original oxygen recovery also found in that link)
2. boot to fastboot
3. flash original recovery (i believe you know how to flash, you have twrp in your oneplus 3, this should not be a problem to you)
4. reboot to recovery
5. choose adb sideload
6. adb sideload the latest oxygen os zip
you should really just follow step by step the instruction found in the downloads.oneplus.net, assuming you now have the original recovery, not the twrp.
tell me if you still can not follow. ill make a spoonfeed tutorial when i get home using pc. its really hard to write a step by step tutorial using phone.
@abraham I noticed you didn't wipe dalvik cache before installing the OOS. Try wiping dalvik cache, cache, data and system to see if that could solve the problem.
Sent from my ONEPLUS A3003 using Tapatalk
angdaminaman said:
aassuming you know all the basics and you have computers around you, especially windows os.
1. download everything (latest full oxygen os zip found in downloads.oneplus.net, original oxygen recovery also found in that link)
2. boot to fastboot
3. flash original recovery (i believe you know how to flash, you have twrp in your oneplus 3, this should not be a problem to you)
4. reboot to recovery
5. choose adb sideload
6. adb sideload the latest oxygen os zip
you should really just follow step by step the instruction found in the downloads.oneplus.net, assuming you now have the original recovery, not the twrp.
tell me if you still can not follow. ill make a spoonfeed tutorial when i get home using pc. its really hard to write a step by step tutorial using phone.
Click to expand...
Click to collapse
Tried every possible method. I use twrp official flash zip or adb side load also cannot. I tried using stock recovery also cannot. I tried using the hard brick way last night but after the flash, the phone is charging and I know it is OOS charging thing. Like you power off your phone and let it charge it wok come out a battery logo and charge your phone. I got that so I assume that I have OOS install. But when I power it on it also stuck at booting the phone. So tired right now being finding solution for about 2 weeks. Could it be the hardware problem that effect the phone?
Butit said:
@abraham I noticed you didn't wipe dalvik cache before installing the OOS. Try wiping dalvik cache, cache, data and system to see if that could solve the problem.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Thanks for the advise. Tried but no luck. Still the same problem. What seems to be the problem? Hardware? Or could it be a fake op3 that I bought from china?
Abraham tan said:
Thanks for the advise. Tried but no luck. Still the same problem. What seems to be the problem? Hardware? Or could it be a fake op3 that I bought from china?
Click to expand...
Click to collapse
if you were able to flash op3 twrp, then its not fake. the twrp you downloaded is designed for op3, right? if you have successfully flashed it, then its an authentic op3.
just return/exchange it if possible.
i have changed my Hydrogen OS to Oxygen OS smoothly. I didnt even need to unlock bootloader nor change recoveries.
angdaminaman said:
if you were able to flash op3 twrp, then its not fake. the twrp you downloaded is designed for op3, right? if you have successfully flashed it, then its an authentic op3.
just return/exchange it if possible.
i have changed my Hydrogen OS to Oxygen OS smoothly. I didnt even need to unlock bootloader nor change recoveries.
Click to expand...
Click to collapse
Hmm what's seems to be the problem. I live in Malaysia and I bought the op3 from china so it is kinda hard to return. Maybe I bring to service centre for repair.
Abraham tan said:
What is OOS btw. What is OTA?? How do I flash the OOS? I had install twrp official by one plus website sorry I still a newbie. Btw I had tried using adb side load it also stuck halfway.
Click to expand...
Click to collapse
You have to wait when it stuck half way, it takes some time there and continue usually, this is what i seen?
Hello lovely XDA-members,
this morning a new OTA update/patch came out for my OnePlus 3T, so I downloaded and tryed to install it right away. My phone is rooted on android 7.0 and I have TWRP 3.0.3-0 installed as my recovery. Normally (when I updated to nougat) after downloading a new update the phone reboots itself into TWRP and installs the update by itself, but not this time. I had to seqrch through my phone and had to install thw update manually. After that I rebooted the phone and it started booting the TWRP recovery again, I tried it again and again and again, nothint changed. So I tried to restore my backup with everything functioning, but this wouldnt help either. :/ I read the few existing threads with this problem and heard of a recovery flag that isnt cleared and the bootloader being the problem. One solution that I found was only for an LG phone and I'm afraid that I'll brick my brand new phone I have absolutely no idea what to do now, I would be so happy if someone could help me with this :$
I thank you in advance <3
Encoutered the same problem. Either you reflash the official or twrp recovery (neither did the trick to me) or use this "emergency tool" (which helped me):
https://forums.oneplus.net/threads/unbrick-guide-oneplus-3t.481214/
Btw: TWRP 3.0.3-0 is not working well, switch to 3.0.3-1 beta
Good luck to you
I had the same problem.
How you can ''unbrick it'':
1. Flash a any rom available for the oneplus 3t via twrp
a. after this you will be still in twrp bootloop, to solve this go to step 2
2. Flash back stock recovery via twrp
Now your system will boot again
Optional: Flash back twrp
Just flash stock recovery via adb and you're done. It will fix the problem, you won't lose any data
Isus <3 said:
Just flash stock recovery via adb and you're done. It will fix the problem, you won't lose any data
Click to expand...
Click to collapse
@Isus <3 and @koentdm Do you have a download for the stock recovery, cause the oneplus download-site isnt working and I cant find any other downloads for it
EYT said:
@Isus <3 and @koentdm Do you have a download for the stock recovery, cause the oneplus download-site isnt working and I cant find any other downloads for it
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B0pr-ZA5b-1pNVlxV3ljMUFaUHc/view
Thank you so much, it worked
EYT said:
Thank you so much, it worked
Click to expand...
Click to collapse
No problemos my friendos
I flashed latest TWRP with fastboot command on CMD.
TWRP works but after I reset the TWRP was deleted and I can get STOCK recovery.
I can boot up TWRP only if I connect my device to computer and use command FASTBOOT BOOT RECOVERY.IMG
Why?
If u flashed a rom,.then before booting you must flash the root file or a custom kernel in order to keep the TWRP.
Unleashed by my rooted OP3T on 8.0
I do not flashing another rom, only new open beta versions and flash files.
saarxee said:
I do not flashing another rom, only new open beta versions and flash files.
Click to expand...
Click to collapse
New open beta is another Rom buddy.
Unleashed by my rooted OP3T on 8.0
But I dont need custom kernel and root.
saarxee said:
But I dont need custom kernel and root.
Click to expand...
Click to collapse
You have to flash at least Magisk/SuperSU or custom kernel in order to keep TWRP intact after each reboot. Not sure about modified stock kernels with dm-verity and forceencrypt disabled, they may work too.
This is the nature of stock ROM.
saarxee said:
But I dont need custom kernel and root.
Click to expand...
Click to collapse
OOS enforces encryption and restores the stock recovery when you reboot your phone.
Custom ROMs, custom kernels, and Magisk all prevent that from happening.
If you want plain OOS (stable or Open Beta) and keep TWRP, then use Xennet's patched boot image. See https://forum.xda-developers.com/on...y-force-encryption-op3t-t3688748/post74155053
Sent from my OnePlus3T using XDA Labs
I flashed magisk on TWRP and TWRP deleted again after restart.
What can I do?
Reflash your current ROM via TWRP and flash Magisk right after ROM without restarting
Today I flashed open beta 24 and after that Magisk and wipe dalvik and restart recovery and I got stock recovery and dont TWRP.
saarxee said:
Today I flashed open beta 24 and after that Magisk and wipe dalvik and restart recovery and I got stock recovery and dont TWRP.
Click to expand...
Click to collapse
Like I said, use Xennet's patched boot image.
Sent from my OnePlus3T using XDA Labs
What to do about this file? flash it and install TWRP again? or only flash it and restart to recovery?
Why I need to change my boot file? If my device dont booting up after the flash?
saarxee said:
Why I need to change my boot file? If my device dont booting up after the flash?
Click to expand...
Click to collapse
Because stock will always revert to stock recovery.
If the device doesn't boot, then you're using an incompatible boot image
(it seems that Magisk/SuperSU isn't enough)
I flashed this boot patched image and choose restart to recovery and stock recovery again...
I have the same problem - twrp gets erased after booting in OS Since beta 24
I don't know guys what's wrong with your devices, I'm using Open Beta 24 with custom kernel and TWRP boots everytime.
I use stock kernel, maybe that is the clue.
Viktorrr said:
I use stock kernel, maybe that is the clue.
Click to expand...
Click to collapse
Then maybe you should flash the modified kernel that is especially modified to not restore the stock recovery.....
gizahNL said:
Then maybe you should flash the modified kernel that is especially modified to not restore the stock recovery.....
Click to expand...
Click to collapse
Correct, as I pointed out in this post https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867/post76049932
Sent from my OnePlus3T using XDA Labs
gizahNL said:
Then maybe you should flash the modified kernel that is especially modified to not restore the stock recovery.....
Click to expand...
Click to collapse
BillGoss said:
Correct, as I pointed out in this post https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867/post76049932
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
OP said that it didn't work:
I flashed this boot patched image and choose restart to recovery and stock recovery again...
Click to expand...
Click to collapse
I am upgrading my OP3T from 5.0.1 to 5.0.3. My device is rooted using magisk and I have TWRP installed.
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?
EDIT - I read about Dirty flashing the version I want but I can't find 5.0.3 image on Oneplus website.
shantam2 said:
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?.
Click to expand...
Click to collapse
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).
przemcio510 said:
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).
Click to expand...
Click to collapse
Re-flashing magisk via TWRP will keep my data ?
It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0
RASTAVIPER said:
It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0
Click to expand...
Click to collapse
Can you elaborate more on this ?
After I upgrade (and it becomes unrooted). I immediately flash magisk via TWRP ?
I didn't get the part "flash the whole rom and don't exit" ?
Also, Will I lose any data in the process ?
shantam2 said:
Re-flashing magisk via TWRP will keep my data ?
Click to expand...
Click to collapse
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.
przemcio510 said:
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.
Click to expand...
Click to collapse
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?
b4bass said:
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?
Click to expand...
Click to collapse
If you flash the update downloaded as zip from downloads.oneplus.com via TWRP, then no, there will be no need to flash it again via fastboot and no need to install TWRP Manager.
Boot to TWRP
Flash 5.0.3 zip
Flash Magisk
Reboot & enjoy
OK thanks! I thought the recovery would go back to stock after flashing the rom
And guys, if other members help you with their posts, don't forget to thank them.
Unleashed by my rooted OP3T on 8.0
b4bass said:
OK thanks! I thought the recovery would go back to stock after flashing the rom
Click to expand...
Click to collapse
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs
BillGoss said:
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
So magisk is patching bootloader? I thought it was it point not to
Though this method is saving me some serious time!
b4bass said:
So magisk is patching boot, I thought I was it point not to
Though this method is saving me some serious time!
Click to expand...
Click to collapse
Magisk makes a point of not touching the system partition but a lot of its magic is done by changing the boot image.
Sent from my OnePlus3T using XDA Labs
OK thx ! First time I replaced supersu to pet magisk. Will have to find more details on this subject
b4bass said:
So magisk is patching bootloader? I thought it was it point not to
Click to expand...
Click to collapse
Boot image is kernel and ramdisk. Boot image is not the same as bootloader!
Hi, so i've just installed A1's 8.1 version 9.6.3(security update from 5th of June). Ported with modded TWRP. Looks good with one exception - mobile network keeps disconnecting and connecting back constantly. So basically it makes phone unusable at all.
Any idea how to fix it? May be by flashing specific radio?
PS before i was using 8.1 beta versoin 8.5.11(security update from May) without issues.
SOLVED by flashing modem that comes with original A1 8.1 rom. Video recording isn't working btw. The only thing i found for now
Ok, rolled back to that same 8.1 beta. Mobile network is connecting and disconnecting constantly as well. Now i'm not sure if it was working before since i've used this rom for few hours only and just may be didn't notice it initially. Going back to 8.0 until solution found.
vvorth said:
Hi, so i've just installed A1's 8.1 version 9.6.3(security update from 5th of June). Ported with modded TWRP. Looks good with one exception - mobile network keeps disconnecting and connecting back constantly. So basically it makes phone unusable at all.
Any idea how to fix it? May be by flashing specific radio?
PS before i was using 8.1 beta versoin 8.5.11(security update from May) without issues.
SOLVED by flashing modem that comes with original A1 8.1 rom. Video recording isn't working btw. The only thing i found for now
Click to expand...
Click to collapse
Did you flash the A1 rom straight into TWRP or edited before?
bandicout said:
Did you flash the A1 rom straight into TWRP or edited before?
Click to expand...
Click to collapse
Flashed by fastboot. Booted to recovery straight ahead to port it with a1to5x script. But again, flashing A1's modem fixed the issue for me.
vvorth said:
Flashed by fastboot. Booted to recovery straight ahead to port it with a1to5x script. But again, flashing A1's modem fixed the issue for me.
Click to expand...
Click to collapse
How files you flash?
I use system.img and boot.img, but enter in bootloop
bandicout said:
How files you flash?
I use system.img and boot.img, but enter in bootloop
Click to expand...
Click to collapse
Do you port your rom after installation using modded TWRP? Running a1to5x in TWRP terminal right after flashing your system and boot?
vvorth said:
Do you port your rom after installation using modded TWRP? Running a1to5x in TWRP terminal right after flashing your system and boot?
Click to expand...
Click to collapse
Yes, i do... Flash boot and system from tissot-F-OPM1.171019.019.V9.6.3.0.ODHMIFE in fastboot, use comand a1to5x in TWRP, wipe dalvik and cache. But start in bootloop
bandicout said:
Yes, i do... Flash boot and system from tissot-F-OPM1.171019.019.V9.6.3.0.ODHMIFE in fastboot, use comand a1to5x in TWRP, wipe dalvik and cache. But start in bootloop
Click to expand...
Click to collapse
To be honest i have no idea what could be wrong then. I assume are already factory reset to make sure it's a clean installation. Sorry. I'm also just trying everything possible unless i'm not sure i can restore it after failure.
Can you just share the link of firmware you flashed, and the link of script also. Please.
bandicout said:
Yes, i do... Flash boot and system from tissot-F-OPM1.171019.019.V9.6.3.0.ODHMIFE in fastboot, use comand a1to5x in TWRP, wipe dalvik and cache. But start in bootloop
Click to expand...
Click to collapse
Alright so I successfully flashed Mi A1 8.1 Oreo.
Download the Firmware from Here: https://forum.xda-developers.com/showpost.php?p=76947535&postcount=421
Flash system and all other files manually.
Or else, use this method https://forum.xda-developers.com/mi-5x/how-to/guide-how-to-install-a1-rom-5x-t3777139
(Remeber to keep all the files in "images" folder.
Install TWRP.
Wipe dalvik and Cache
Go to Advance, terminal run a1to5x
I'm using Aex 5.7 on my MI 5X and my network is constantly dropping. What could be done to fix it? Thank you.