In case that someone will need it, here it is Blu stock rom BLU_V0090EE_V11.
Added new updated stock rom BLU_V0090UU_V25.
Added new stock rom BLU Vivo 5R V0090UU 7.0
mirozeman said:
In case that someone will need it, here it is Blu stock roms BLU_V0090EE_V11.
Click to expand...
Click to collapse
Hi mirozeman. Maybe you can help me...
It seems I misused the SP Flash Tool and my radio stopped working. Is there any way to fix it? Thanks!
Antipatiko said:
Hi mirozeman. Maybe you can help me...
It seems I misused the SP Flash Tool and my radio stopped working. Is there any way to fix it? Thanks!
Click to expand...
Click to collapse
I'm not sure how to fix the problem with radio. Did you try to reflash stock rom again or what did you do?
Hi,
Can you tell if there is any difference (like major updates) between the two ROM's?
Thanks.
do u flash via TWRP?
I am unable to flash this using TWRP.
Its missing the update script?
I think this ROM is not an update ROM I am guessing? And I already covered the original recovery with TWRP. What can I do to install the ROM?
2hdass said:
I am unable to flash this using TWRP.
Its missing the update script?
I think this ROM is not an update ROM I am guessing? And I already covered the original recovery with TWRP. What can I do to install the ROM?
Click to expand...
Click to collapse
Hi,
For flashing new rom, you need to use SP flash tool. I hope you know how to use SP flash tool, if not, learn how to use it first and then use SPflash.
Question
Why doesn't this new update appear on the automatic updates section on the phone?
Hello greetings I have flashed my blu vivo 5r and I lost the connection 4glte I only have 4g and it is intermittent it falls and again it is also slow I saw in the part of imei and it says unknown help me probe to change the imei or to place the original with different applications And none works for me thanks
rickyricardopr said:
Hello greetings I have flashed my blu vivo 5r and I lost the connection 4glte I only have 4g and it is intermittent it falls and again it is also slow I saw in the part of imei and it says unknown help me probe to change the imei or to place the original with different applications And none works for me thanks
Click to expand...
Click to collapse
Hi,
Try to flash newer update V25.
Use SP flash tool to flash the newer update. Let it run through the setup, and then factory reset.
Te problem should be fixed.
mirozeman said:
Hi,
Try to flash newer update V25.
Use SP flash tool to flash the newer update. Let it run through the setup, and then factory reset.
Te problem should be fixed.
Click to expand...
Click to collapse
Thanks for replying when you say factory reset is IN wipe data / factory reset?
---------- Post added at 08:03 AM ---------- Previous post was at 07:29 AM ----------
mirozeman said:
Hi,
Try to flash newer update V25.
Use SP flash tool to flash the newer update. Let it run through the setup, and then factory reset.
Te problem should be fixed.
Click to expand...
Click to collapse
It does not work install the v25 and I did the factory reset and it follows me in 4g and not in 4glte and the imei says unknown please help me thanks :crying:
You must do something wrong. Try it again.
Flash rom v25.
Start your phone and follow the setup (language=>wifi=>google account=>.......).
Now in your phone go to setting and find factory reset.
Reset your phone and reboot.
Don't use TWRP for factory reset, it wont work.
bothe storage?
Does it have bothe storage options? internal and portable?
mirozeman said:
Hi,
Try to flash newer update V25.
Use SP flash tool to flash the newer update. Let it run through the setup, and then factory reset.
Te problem should be fixed.
Click to expand...
Click to collapse
How To Use SPflash tool
Found this at link below with some factory ROMs, latest was V22. Good instruct on using the SP Flash tool. Sorry for the all caps, that's how I got it and I don't feel like retyping it.
https://www.needrom.com/download/blu-vivo-5r/
ONLY MT6753
——————————————————————————————————————————————————————–
Update Official ROM BLU Version: BLU_V0090UU_V22_GENERIC - full_gionee6753_65u_m0-user 6.0 MRA58K
Gapps include – No Rooted
Language support : Multilang
BEFORE Installing ROM : UNZIP ROM FILES YOU DOWNLOADED, WILL NOT LOAD FROM AN ARCHIVE LIKE MANY OTHER ANDROID SYSTEMS. AND YES, LIKE BELOW, ALL THIS HAPPENS WITH THE PHONE POWERED OFF-IT GETS WHAT EVER POWER IT NEEDS FROM THE USB CABLE, NO OS BOOTED UP LIKE OTHER ANDROID SYSTEMS. ie, RECOVERY, THIS WRITES STRAIGHT TO THE PHONE STORAGE AND MAKES THE PARTITIONS FROM YOUR PC FROM THE USB CABLE. HIGHLY RECOMMEND USING A USB PORT DIRECTLY ON THE COMPUTER, NOT FROM A USB HUB OR THROUGH ANY OTHER USB DEVICE.
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6753_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
---------- Post added at 09:13 AM ---------- Previous post was at 09:07 AM ----------
gtaber said:
Found this at link below with some factory ROMs, latest was V22. Good instruct on using the SP Flash tool. Sorry for the all caps, that's how I got it and I don't feel like retyping it.
https://www.needrom.com/download/blu-vivo-5r/
ONLY MT6753
——————————————————————————————————————————————————————–
Update Official ROM BLU Version: BLU_V0090UU_V22_GENERIC - full_gionee6753_65u_m0-user 6.0 MRA58K
Gapps include – No Rooted
Language support : Multilang
BEFORE Installing ROM : UNZIP ROM FILES YOU DOWNLOADED, WILL NOT LOAD FROM AN ARCHIVE LIKE MANY OTHER ANDROID SYSTEMS. AND YES, LIKE BELOW, ALL THIS HAPPENS WITH THE PHONE POWERED OFF-IT GETS WHAT EVER POWER IT NEEDS FROM THE USB CABLE, NO OS BOOTED UP LIKE OTHER ANDROID SYSTEMS. ie, RECOVERY, THIS WRITES STRAIGHT TO THE PHONE STORAGE AND MAKES THE PARTITIONS FROM YOUR PC FROM THE USB CABLE. HIGHLY RECOMMEND USING A USB PORT DIRECTLY ON THE COMPUTER, NOT FROM A USB HUB OR THROUGH ANY OTHER USB DEVICE.
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6753_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Click to expand...
Click to collapse
Want to add, if you have TWRP installed, like I did, it will be gone and so will your root, this wipes the phone completely, just like new when finished. And since it works powered off, as long as you can get the phone to turn off, you can recover it. Excellent design feature, why can't they all do that, and give you a switch to allow unlocked boot loader in settings. You will need to re-root after doing above.
hello, what is the password for the file 7.0???
Thanks
Password is: www.stockrom.net
Hola. Algona contraseña para descomprimir el zip??
Is this new 7.0 stock rom aosp and/or rootable?
IMEI Restore
rickyricardopr said:
Thanks for replying when you say factory reset is IN wipe data / factory reset?
---------- Post added at 08:03 AM ---------- Previous post was at 07:29 AM ----------
It does not work install the v25 and I did the factory reset and it follows me in 4g and not in 4glte and the imei says unknown please help me thanks :crying:
Click to expand...
Click to collapse
Hey! To restore your IMEI you should use Maui META. You will need the stock Android 6.0 firmware (unzipped) as the program uses a file within the firmware. You do not need to flash the rom, just need it for the file. Your Imei should be on the original box that the phone came in. POWER OFF YOUR PHONE BEFORE DOING THIS OR ELSE IT WON'T WORK!!! Here is a tutorial: h t t p s : / / w w w . y o u t u b e . c o m / w a t c h ? v = V E Y V o D M 2 u H w (spaced because xda won't let me post links yet)
ZaggyWeedMaster7546 said:
Hey! To restore your IMEI you should use Maui META. You will need the stock Android 6.0 firmware (unzipped) as the program uses a file within the firmware. You do not need to flash the rom, just need it for the file. Your Imei should be on the original box that the phone came in. POWER OFF YOUR PHONE BEFORE DOING THIS OR ELSE IT WON'T WORK!!! Here is a tutorial: h t t p s : / / w w w . y o u t u b e . c o m / w a t c h ? v = V E Y V o D M 2 u H w (spaced because xda won't let me post links yet)
Click to expand...
Click to collapse
Does it necessarily have to be the Android 6.0 firmware, or you can use the new 7.0 as well?
Related
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
which ROm are you trying to install? Please provide more info on your problem, so we could help you better
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
There are some problem that causes custom rom cannot boot. I will state the problem but, you gonna go search it for yourself.
1.Busybox not correctly installed
2.Root incorrectly
3.Baseband incompatible
4.Rom need custom kernel to work (Extra care.)
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
Also THE MAIN ONE make sure usb debugging is enabled
I do that all the time when i trying..
I do this for some times..5 or 6..whit different rooms. all the time stucks at sony logo and i can't enter in xRec or CWM..i restore it whit seus
przemek4113 said:
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
Click to expand...
Click to collapse
I do that all the time when i trying..
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
I do that..for 5 or 6 times..it fails!
tujamo1 said:
I do that..for 5 or 6 times..it fails!
Click to expand...
Click to collapse
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
A little stupid hint...
Are you sure you are stuck at se logo? I mean, have you wait enough? Sometimes it gets up to 5 min to start and especially first time...
Sent from my E15i using xda premium
I think I understand you problem here
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
so as mine can any one know how to upgrade 11W42
it is probably the fact you need custom kernel. But before trying to unlock bootloader, turn phone off,, take back cover and battery off and check your phones date ie
10w56 or 11w34 etc
Sent from my X8 using XDA App
sambavadekar said:
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Click to expand...
Click to collapse
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
CKKnot said:
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
Click to expand...
Click to collapse
Thant's man. It work!
wilbso said:
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
Click to expand...
Click to collapse
I'm do this all the time when i flash a new rom. But a had make my phone work. Thanks anyway!
samu1player said:
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
Click to expand...
Click to collapse
My baseband ends with .......15
This guide help you to
install the Samsung Lollipop TouchWiz and get the root permissions
on Galaxy S4 GT-I9506
Do it on your own responsibility! and keep in mind that you will lose your warranty!
Before you proceed, make sure:
1) You have installed your Samsung Galaxy S4 GT-I9506 USB drivers on your PC (the easiest way is to install Kies)
2) Your S4 should have 70-80% charge remaining.
3) Backup all your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt
4) Make sure that Kies software is not running and disable your antivirus
Download the requirements:
Click on each one for download
-Odin software
-Recovery TWRP "flashable"
-SuperSu "flashable"
-Samsung Lollipop Firmware from SAMMOBILE (only if you have KitKat installed)
WARNING! I FOUND PROBLEMS WITH SOME SAMMOBILE FIRMWARE'S READ BELOW
The Czech Republic - ETL firmware (I9506XXUDOA6_I9506OXXDOA1), has WiFi broken
The Czech Republic (Vodafone) - VDC firmware (I9506XXUDOA6_I9506VFGDOA4), has wrong "Hidden" partition size
If you meet this problems you can download this official firmware from samsung updates site:
Greece - EUR firmware (I9506XXUDOAA_I9506EURDOB1)
BUILD DATE: 30.01.2015
How to install the firmware and root
If you already have the Lollipop firmware installed: Skip to the Step 8
NOTE: I racommend you to do the wipe of cache, dalvik cache, system, data partitions before proceeding,
this to prevent any problems with the apps (through recovery)
Step 1
Unzip the downloaded firmware, you will get a tar.md5 file.
Step 2
Turn OFF you mobile and go to Download Mode by pressing and holding the Power + Volume Down + Home Buttons.
together for few seconds followed by Power button then proceed with volume up.
Step 3
Now open ODIN on your PC and connect your Galaxy S4 to your computer.
Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 4
Click on PDA (or AP) in Odin and choose the file ".tar.md5"
Step 5
Check "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
Step 6
Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
Step 7
When the installation is completed, you read a "Reset " then a "Pass". your phone will restart (first boot will take a longer time so don't panic)
> Step 8
now you have to do again all steps from Step 2, for flash the TWRP recovery needed for apply the ROOT,
the only difference is when you arrive on Step 4 you must have to choose the TWRP Recovery ".tar.md5" downloaded file
Step 9
Turn OFF you mobile and go to Recovery Mode by pressing and holding the Power + Volume Up + Home Buttons.
Step 10
Connect the mobile with USB and copy the "UPDATE-SuperSU-v2.45.zip" in the SD
Step 11
Click on the "INSTALL" button, select "UPDATE-SuperSU-v2.45.zip", and swipe to flash. After this reboot
Finish! Enjoy!
----------------------------------------------------------------------------------------------------------------------------
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat the procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Make sure the antivirus is disabled
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install the USB driver.
- Try another computer.
Titanium Backup does not recognize the root:
- Install Titanium Backup version 7.0+
Titanium Backup does not recognize external SD:
- Install SDFix app for applying the missing external SD card permissions
Thanks to samersh72 for the inspiration to create the guide
Thx for this guide! What about Knox value after manual flash?
Envoyé de mon LG-V500 en utilisant Tapatalk
byanou69 said:
Thx for this guide! What about Knox value after manual flash?
Envoyé de mon LG-V500 en utilisant Tapatalk
Click to expand...
Click to collapse
After flash the warranty Knox is rightly marked,
that's becouse i wrote that you lose the warranty,
but this happens anyway if you perform unauthorized flash...
General Information:
CastagnaIT and my GT-I9506 devices are originally from ETL CSC... so Czech Republic firmware.
We found that the original ETL firmware has broken WiFi, and we discover that flashing the cache partition of Vodafone firmware has solved the issue... this is the reason we provide here an already fixed firmware.
Probably with newer updates it will be automatically solved, but for now this fix is working perfectly.
I dirty flashed the modified firmware file directly over my TW 4.4.2 installation, and I saw the phone has correctly get the update without any loosing of apps or datas... so my installation is exactly equivalent to a normal Sammy update.
Thanks for the attention.
German Vodafone have also broken WiFi...
The German rom seemed to work for me, no issues.
The German rom seemed to work for me, no issues.
Flash procedure check...
Developer.WL said:
German Vodafone have also broken WiFi...
Click to expand...
Click to collapse
Drady said:
The German rom seemed to work for me, no issues.
Click to expand...
Click to collapse
Hi,
I have a doubt... let me explain.
When you flashed with Odin, the correct procedure I think is this one.
1) After flash complete the phone must restart automatically
2) at the first boot, the recovery must be automatically activated and a flash of a cached element must appear
3) after this recovery flash, the phone reboot automatically and finally start with rom initialization
I think that for @Drady this has happened, and I think also that for @Developer.WL this has not happened.
This recovery flash is the culprit (probably) that give as result the wifi working.
I saw this, because I prepared a modded firmware with removed the recovery.img, so my Odin flash has not installed the stock recovery, leaving twrp as recovery.
After my flash, the phone was just shutdown (no reboot). Remembering that recovery flash was also done for previous KK firmware, I switched on the phone by pressing the buttons Vol-up + Power + Home, and my phone has booted into twrp and has flashed the missing cache part, than the phone auto-rebooted correctly and the system is working as it must.
My suggestion to @Developer.WL, is to reflash the firmware, taking care that at the first boot the phone must go to recovery (flash is about a couple of seconds) and after this must reboot into the rom...
Please let us know if this solve the wifi issue.
Thanks for cooperation.
AFAIK you should turn off device before enter download mode and then flash Czech version, this will let you to replace old modem with new one.
kornelius1982 said:
AFAIK you should turn off device before enter download mode and then flash Czech version, this will let you to replace old modem with new one.
Click to expand...
Click to collapse
Yes, the download mode must be enabled from phone off status with buttons procedure (Vol-Down + Power + Home).
The fixed firmware is finally ready for download!
5.0
I am curious to try the official 5.0 even though i am waiting for the Nordic Countries(NEE) Release , ill just see if the WI-FI on German version works till than ..
Arter97 aosp kernel
Is it possible to flash this kernel (link below) on this latest Official lollipop samsung release for i9506 ?
http://forum.xda-developers.com/showthread.php?t=2691648
---------- Post added at 05:41 PM ---------- Previous post was at 05:00 PM ----------
I have the answer : i9506 not supported for the moment by these kernels
Your fixed ROM's link is dead. MediaFire says "Dangerous File Blocked". Please upload it to another cloud.
boggy27 said:
I am curious to try the official 5.0 even though i am waiting for the Nordic Countries(NEE) Release , ill just see if the WI-FI on German version works till than ..
Click to expand...
Click to collapse
For your information, official 5.0.1 NEE has been released...
---------- Post added at 09:24 PM ---------- Previous post was at 09:10 PM ----------
yazsers said:
Is it possible to flash this kernel (link below) on this latest Official lollipop samsung release for i9506 ?
http://forum.xda-developers.com/showthread.php?t=2691648
---------- Post added at 05:41 PM ---------- Previous post was at 05:00 PM ----------
I have the answer : i9506 not supported for the moment by these kernels
Click to expand...
Click to collapse
Absolutely NOT!!! Arter kernel is AOSP based, Official Lollipop is TW...
---------- Post added at 09:32 PM ---------- Previous post was at 09:24 PM ----------
ShaneDiNozzo said:
Your fixed ROM's link is dead. MediaFire says "Dangerous File Blocked". Please upload it to another cloud.
Click to expand...
Click to collapse
Thanks for the head-up... already requested to Mediafire to remove the block on download... file is safe, not dangerous...
how to debloat after root? using root explorer how can i do?
smeroni68 said:
For your information, official 5.0.1 NEE has been released...
---------- Post added at 09:24 PM ---------- Previous post was at 09:10 PM ----------
Thank you! It has been released just today , that is great ! And thx for this helpfull post!
Click to expand...
Click to collapse
sibellius said:
how to debloat after root? using root explorer how can i do?
Click to expand...
Click to collapse
At this moment there is no way I tried root uninstall, TB and uninstall without any result.
I think we have to wait for updates
i don't fix glonass on this NEE version....
I have LineageOS 13, TWRP and I want to ROOT my i9506. As I understand, I can't ROOT it on LineageOS 13 - I have to install official ROM, ROOT it, and then install LineageOS again, yes?
Code:
I am not responsible for any damage whatsoever that may occur
In following these instructions. I've tested it on infinix X510
And it worked for me. Be sure to follow the instructions
And let it be clear that you are doing it at your own risk
Many people have been asking about aa stock Rom for X510 infinix hot2
And some have even bricked the phone or having problems with OTA install
This will be very helpful....
Requirements:
Mediatek VCOM USB (preloader) driver
SP FLASH TOOL Click here for tutorial
Or here for the video tutorials SPFlash Tool Full video tutorials
DROID TOOL
ADB AND FAST BOOT
STOCK INFINIX ROM FOR X510 Click here Mega
Update! ANDROID ONE STOCK FIRMWARE 5.1.1 Fixed to enter recovery manually Click here to download (Mega)
If you want to flash custom recovery for infinix hot 2
Please Click herek
Before I proceed further, the first thing you must do
Is to back up your present Rom (100%) with Droid tool
And SP FLASH TOOL if you haven't bricked the phone yet.
THIS ROM CAN ONLY BE INSTALLED WITH SP FLASH TOOL
HOW TO INSTALL
First, you need a PC, Mediatek VCOM USB Drivers and SP Flash tool
Do a backup incase things go wrong
Download the stock Rom and extract the zip
Open the folder and check for MT6580_Android_scatter.txt (Infinix ROM scatter file has 23 partitions while Android one scatter file has 28 partitions, open with text editor and confirm before flashing)
Open SP FLASH TOOL as administrator
Click on scatter loading and load the scatter file above
Select download and choose sub options of download only or firmware upgrade from
The drop down option under the download had these following options:
Download only: use this option when you are flashing the same type of ROM that is in your phone. Use this option for also flashing recovery or if you want to flash select partitions only
Firmware upgrade: Use this option when you are about to a different ROM from the one in your phone e.g. if you're using Android one ROM and want to flash infinix ROM or vise versa. Note; to use firmware upgrade option, every partition must be selected. You can also use this option on partially bricked phones.
Format All and download: this option should only be used for fully bricked phones
Click on the download icon when you are ready
Power down your phone, connect quality usb chord to your phone first. Keep
The phone in a place where it won't shake. Connect it to your PC. If you correctly
INSTALLED Mediatek VCOM USB DRIVERS it will detect and install the ROM.
Developers needed
Developers are also needed to help out as all my efforts to port custom recovery
Have proved abortive as it seems that the recovery image is protected. I've attached all the image in the ROM so please use the image to see if you can unpack them and create a custom recovery at least.
ABOUT THE ROM
Please make sure that your phone model is X510 to avoid bricking your phone
The infinix Rom is more of AOSP than pure Google that came with my X510
It has more features than the out of Box Rom that came with my phone.
"Ok Google" doesn't work from from the home screen you have to tap the search
Bar and say OK Google.
It has better battery optimisation about 30-40%
It can work for any most African regions and beyond.
I've also added the Android one stock firmware in incase you want to go back to out of the box Google stock Android one firmware. This is necessary because it's from this stock firmware that you can update to Marshmallow 6.0 once the roll out starts for 2nd generation Android one phones
Credits:
Infinixmobility
@DR_MOOSAVI for SP FLASH TOOL Tutorial
Ahmed ElShaer for uploading the stock rom (all credit for the rom to him)
Feel free to ask your questions... ?☺
More screen shots of the Rom....
More screen shots
Can you port a custom recovery for this device please
cainwireshark said:
Can you port a custom recovery for this device please
Click to expand...
Click to collapse
Still working on that and as a new phone no much
Resources on the net for it and X510 still lacks
Developers. But as soon as I get a break through
I'll post it here.
Bolumstar said:
Still working on that and as a new phone no much
Resources on the net for it and X510 still lacks
Developers. But as soon as I get a break through
I'll post it here.
Click to expand...
Click to collapse
any breakthrough yet ?
cainwireshark said:
any breakthrough yet ?
Click to expand...
Click to collapse
I've been a bit busy on other things but still searching
For a way to get a custom recovery. The mail challenge
Is the fact that MTK Droid Tools (latest version) can not create a
Scatter file for this phone as MT6580 is not yet
Compatible with it. Am still working with the scatter
File from this Rom but haven't gotten the breakthrough
Yet.
Once I get a break through I'll upload it here.
My phone is stuck on booting screen
Please after upgrading the rom my hot 2 is stuck in booting screen please help
Qwame1 said:
Please after upgrading the rom my hot 2 is stuck in booting screen please help
Click to expand...
Click to collapse
Give me more details, you have to use download
First in SP flash tool not "firmware upgrade" but tell
Me the one you did first and all the steps you took
My phone is stuck on booting screen
OK it finally worked nice rom tho thanks
should i update it?
Qwame1 said:
OK it finally worked nice rom tho thanks
should i update it?
Click to expand...
Click to collapse
TheThere update makes even better...
Data upload and download bar for data
Connection in but mobile and WiFi network connection
And lots more
Do hit the ? Thanks button below if I helped....
Thanks soo much
Thanks bro ur rom rocks :good::good:
But can u create a custom recorvery
Qwame1 said:
Thanks bro ur rom rocks :good::good:
But can u create a custom recorvery
Click to expand...
Click to collapse
Still working on that and once I get a break through
I'll post it here, stay tuned!
Bolumstar said:
I've been a bit busy on other things but still searching
For a way to get a custom recovery. The mail challenge
Is the fact that MTK Droid Tools (latest version) can not create a
Scatter file for this phone as MT6580 is not yet
Compatible with it. Am still working with the scatter
File from this Rom but haven't gotten the breakthrough
Yet.
Once I get a break through I'll upload it here.
Click to expand...
Click to collapse
I have a weird problem with Infinix Hot 2 the phone after installing the ROM on infinix website the Android one ROM the volume buttons not working in the bootloader that' only mean the device can only boot normally and can't boot into recovery or bootloader using buttons
D3VI0US said:
I have a weird problem with Infinix Hot 2 the phone after installing the ROM on infinix website the Android one ROM the volume buttons not working in the bootloader that' only mean the device can only boot normally and can't boot into recovery or bootloader using buttons
Click to expand...
Click to collapse
Make sure you closed the back casing well.
Reflash the rom with the newest version of SP FLASH TOOL
Reflash it using "firmware upgrade"
If the problem persists, reinstall VCOM USB Drivers
Try another port/usb cable
And make sure the phone don't even shake while
Flashing
Bolumstar said:
Make sure you closed the back casing well.
Reflash the rom with the newest version of SP FLASH TOOL
Reflash it using "firmware upgrade"
If the problem persists, reinstall VCOM USB Drivers
Try another port/usb cable
And make sure the phone don't even shake while
Flashing
Click to expand...
Click to collapse
the phone is working normally and volume button is working in the normal mode as a volume button and I tried everything still couldn't get to boot into recovery from the buttons
I have to use adb reboot recovery from PC
one thing is interesting enough is if I flash the infinix skinned ROM not the stock Android one I can boot in recovery using power+volume up but still I can't boot into bootloader
It's most probably the ROM but which part of the ROM is broken I don't know
D3VI0US said:
the phone is working normally and volume button is working in the normal mode as a volume button and I tried everything still couldn't get to boot into recovery from the buttons
I have to use adb reboot recovery from PC
one thing is interesting enough is if I flash the infinix skinned ROM not the stock Android one I can boot in recovery using power+volume up but still I can't boot into bootloader
It's most probably the ROM but which part of the ROM is broken I don't know
Click to expand...
Click to collapse
I just flashed the AndroidOne stock Rom yesterday to
Test out somethings but I've gone back to this
Rom (Infinix 5.1) unfortunately I didn't test going into
Recovery.
As par where the problem is coming from,
It should be between preloader and recovery2
D3VI0US said:
the phone is working normally and volume button is working in the normal mode as a volume button and I tried everything still couldn't get to boot into recovery from the buttons
I have to use adb reboot recovery from PC
one thing is interesting enough is if I flash the infinix skinned ROM not the stock Android one I can boot in recovery using power+volume up but still I can't boot into bootloader
It's most probably the ROM but which part of the ROM is broken I don't know
Click to expand...
Click to collapse
I just flashed the AndroidOne stock Rom yesterday to
Test out somethings but I've gone back to this
Rom (Infinix 5.1) unfortunately I didn't test going into
Recovery.
As par where the problem is coming from,
It should be between preloader and recovery2
Try reflashing the Rom again with firmware upgrade
If problem persists, try downloading from this
Link
https://mega.nz/#!gBd2GRQY!JmWPHeMDBrGCg5TvcJeXuXl9OAw_lUZRhJ00OHOznqY
Bolumstar said:
I just flashed the AndroidOne stock Rom yesterday to
Test out somethings but I've gone back to this
Rom (Infinix 5.1) unfortunately I didn't test going into
Recovery.
As par where the problem is coming from,
It should be between preloader and recovery2
Try reflashing the Rom again with firmware upgrade
If problem persists, try downloading from this
Link
https://mega.nz/#!gBd2GRQY!JmWPHeMDBrGCg5TvcJeXuXl9OAw_lUZRhJ00OHOznqY
Click to expand...
Click to collapse
That's the same link from Infinix website and that's the only ROM available for Android one. and since we can't create a scatter file from a fully working device so we won't be able to extract the preloader and flash it on any other phone .. by the way if you have the phone is yours booting into recovery and bootloader using buttons ?
The problem lies after a network change for data connection, subsequently did not recognize any of the simcard.
Its status is NO SERVICE, and dialing * # 06 # does not appear the "IMEI", checking in forums comments that a factory restoration should be done.
In the options of simcard in the phone indicates that "insert a simcard", is as if it recognized neither of the two simcard
I have tested with SM, Naute3g and IMEI.exe and none to served. I have the clipboard phone, can help me to solve this problem. The phone is amazing but has little support.
IMPORTANT: I made a serious mistake by not creating a backup with TWRP, and now I can not return to a previous version.
Please Help me......:crying::crying::crying::crying::crying::crying:
andrestc91 said:
The problem lies after a network change for data connection, subsequently did not recognize any of the simcard.
Its status is NO SERVICE, and dialing * # 06 # does not appear the "IMEI", checking in forums comments that a factory restoration should be done.
In the options of simcard in the phone indicates that "insert a simcard", is as if it recognized neither of the two simcard
I have tested with SM, Naute3g and IMEI.exe and none to served. I have the clipboard phone, can help me to solve this problem. The phone is amazing but has little support.
IMPORTANT: I made a serious mistake by not creating a backup with TWRP, and now I can not return to a previous version.
Please Help me......:crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Tried Flashing the FULL OTA zip?
Saurabh K said:
Tried Flashing the FULL OTA zip?
Click to expand...
Click to collapse
If you already do it and nothing.
I was investigating and it tells me that it is a problem of the folder EFS, I look for it like root explorer but I do not get it, it means that I lost it?
What can I do in that case?
Reverse back to older stock rom version and install a OTA update through updater app.
Sent from my Le X526 using XDA-Developers mobile app
---------- Post added at 07:46 PM ---------- Previous post was at 07:44 PM ----------
I was having the same issue in my Redmi note 3 flashed stock rom through fastboot but didn't helped n after I got a ota update flashed it n everything was fine again.
Sent from my Le X526 using XDA-Developers mobile app
zeetwo-raj said:
Reverse back to older stock rom version and install a OTA update through updater app.
Sent from my Le X526 using XDA-Developers mobile app
---------- Post added at 07:46 PM ---------- Previous post was at 07:44 PM ----------
I was having the same issue in my Redmi note 3 flashed stock rom through fastboot but didn't helped n after I got a ota update flashed it n everything was fine again.
Sent from my Le X526 using XDA-Developers mobile app
Click to expand...
Click to collapse
With which version of ROM I do, I have no idea which is the oldest??
Don't know much about x620?
Sent from my Le X526 using XDA-Developers mobile app
I can inform you that already solve the problem, I leave the steps to follow for those who have that problem: (It is horrible to suffer this)
1) Download the ROM STOCK 013s (Installed by Fasboot)
2) Have the Recovery Original installed.
3) Go to recovery, Erase data
4) Flash ROM by Fasboot
5) Go from Fastboot to start ROM leaving the power button.
AND READY.......
You will have your NVRAM folder with no problems.
Remember to be careful when installing any recovery if you have smaller versions of ROM to 014s, Look for the tutorials of BB72 ROM.
Thanks for your help
andrestc91 said:
I can inform you that already solve the problem, I leave the steps to follow for those who have that problem: (It is horrible to suffer this)
1) Download the ROM STOCK 013s (Installed by Fasboot)
2) Have the Recovery Original installed.
3) Go to recovery, Erase data
4) Flash ROM by Fasboot
5) Go from Fastboot to start ROM leaving the power button.
AND READY.......
You will have your NVRAM folder with no problems.
Remember to be careful when installing any recovery if you have smaller versions of ROM to 014s, Look for the tutorials of BB72 ROM.
Thanks for your help
Click to expand...
Click to collapse
After getting nvram folder back will i get my imei back or any other method should be followed ? Sorry for noob question.
Not sure how to solve this
lost my Imei. I can not enter factory/download mode... neither by pressing buttons or adb shell..
no custom recovery installed.
booting to stock recovery is working.
my device le s3 X522 USA
Repair using Qualcomm imei tools
Hello All ..
Today I show You How you can Full Root For Samsung Galaxy J5 Pro SM-J530F
Note
1. Ensure that your Device atleast 50% charge During Flashing Process,to Stop the Accidentally Switch off.
2.Follow all steps correctly otherwise it cause bootloop.
3. Must backup NVRAM using this Guide before Doing anything.-----
Require tools and Files-
odin Download
SuperSu Download
twrp Download
Patched boot.img Download
-----
Part -1) Install twrp Recovery :
Step-1) First, enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>.
To enable Developer Options, go to About phone and tap the Build Number 7 times.
Step-2) Now download the Latest TWRP Recovery for your device.
Step-3) Now Download the Odin tool from above and extract the zip file.
Step-4) Run the Odin.exe file on your PC.
Step-5) Connect your Galaxy Device to your PC with the data cable and reboot into the Download/Odin mode.
Step-6) To enter into download mode turn off your phone and press and hold the ‘Home + Volume Down + Power’ buttons together until you see the download mode screen.
Step-7) Once you enter into Download mode, you see anID: COM port turned blue and Added message in Odin message box means your device has recognized by Odin.
Step-8) If ID: COM doesn’t show means your driver is not correctly installed or try it with different USB cable.
Step-9) Now locate and add the twrp–xxx.img.tar file (you downloaded from above) to the AP/PDA tab in Odin.
Step-10) Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time“
Step-11) Now click ‘Start‘ button and it will start flashing the file. Wait until you see ‘Pass‘ in Green Color on Odin screen.
This step will Install TWRP Recovery On Your Samsung Device
12) Now Your device will automatically reboot. That’s it. You Install TWRP Recovery on Galaxy Device successfully.
----------
Part -2) Root :
Step 1. Download Supersu From above and Save it to Device Storage. [internal or external].
Step 2. Switch off Your Phone and Press Power and volume button to boot Your Device into twrp.
Step 3. On twrp Recovery Go to backup tab and create a nandroid backup, Must Select all partition’s including ESF.
Step 4. Go to wipe tab and Do a factory Reset. Don’t Select any System partition. otherwise it will erase it.
Step 5. Go to install tab, Locate Downloaded SuperSu.zip and Confirm Install, wait for Success Done.
Step 6. flash Patched boot.img if Present. ( in twrp )
Step 7 .Reboot System Now.
---------------------------------
So This is a Complete Guide to to Install twrp Recovery and Root Samsung Galaxy J5 Pro 2017 :good::fingers-crossed::laugh:
Thanks
Step 6. flash Patched boot.img if Present. ( in twrp )
????????????
HELPPPP
türkçe biliyormusun ?
Can phone with network lock be rooted ?
djedjy said:
Can phone with network lock be rooted ?
Click to expand...
Click to collapse
Maybe u can try it
But getting unlocked will be nice
djedjy said:
Can phone with network lock be rooted ?
Click to expand...
Click to collapse
Yes
Sent from my Samsung Galaxy S8+ using XDA Labs
Hi!
Does this work with the dual sim version? (j530F/DS)
This low space available s**t is driving me mad, need to rooooooot!
Please confirm it works
Thank you!
karcas said:
Hi!
Does this work with the dual sim version? (j530F/DS)
This low space available s**t is driving me mad, need to rooooooot!
Please confirm it works
Thank you!
Click to expand...
Click to collapse
It works.. did it last day. ****ed up my camera and sounds nothing else
karcas said:
Hi!
Does this work with the dual sim version? (j530F/DS)
This low space available s**t is driving me mad, need to rooooooot!
Please confirm it works
Thank you!
Click to expand...
Click to collapse
use this Recovery : https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
then this Kernel : https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
and you should get Root
Nekrofiili said:
It works.. did it last day. ****ed up my camera and sounds nothing else
Click to expand...
Click to collapse
You mean rooting broke your camera and speaker? Can you be more specific?
Thanx
---------- Post added at 05:33 PM ---------- Previous post was at 05:30 PM ----------
Nekrofiili said:
It works.. did it last day. ****ed up my camera and sounds nothing else
Click to expand...
Click to collapse
ksa616 said:
use this Recovery : https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
then this Kernel : https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
and you should get Root
Click to expand...
Click to collapse
Thank you very much. I'd love to try that i'm afraid to mess up.... phone is not mine but my company's....
@Nekrofiili said rooting broke his camera and speaker, do you think it's because of wrong kernel?
Confirmed working on j530f/DS (dual sim)
Thank you!
karcas said:
Confirmed working on j530f/DS (dual sim)
Thank you!
Click to expand...
Click to collapse
Which method did you use? The process from the main post or the one posted by @ksa616 on flashing the kernel?
---------- Post added at 12:54 PM ---------- Previous post was at 12:53 PM ----------
karcas said:
Confirmed working on j530f/DS (dual sim)
Thank you!
Click to expand...
Click to collapse
Which method did you use? The process from the main post or the one posted by @ksa616 on flashing the kernel?
I just followed the instruction in the main post and no issue, no need to flash a different kernel
What version of stock ROM should already be installed for this Rooting instructions to work? I am currently using PDA J530FXWU2AQL4 and CSC J530FOJV2AQL1. Will this work?
Asking
This is work for Samsung J530Y?
Stuck in TWRP 3.2.1-0
Hello All
I followed this thread to root my J5PRO. But when I reboot the system, I get back to the TWRP project screen again and again.
What can I do to get my phone back to use? Could you assist ?
Many thanks
usolidd said:
Hello All
I followed this thread to root my J5PRO. But when I reboot the system, I get back to the TWRP project screen again and again.
What can I do to get my phone back to use? Could you assist ?
Many thanks
Click to expand...
Click to collapse
I experienced the same problem, so I had to re-install the stock firmware via Odin. Just look for the stock firmware on the internet (for your phone- mine is J530F), then download Odin and flash it. The process is straightforward and available on the internet, especially YouTube.
Good luck.
Problem with recovery, now Boot-loop
Followed the instructions
When I tried to backup the phone, the storage spaces were all 0MB.
Then obtained error:
' Could not mount /data and unable to find crypto footer'
Now phone is stuck on bootloop.
s_forum said:
Followed the instructions
When I tried to backup the phone, the storage spaces were all 0MB.
Then obtained error:
' Could not mount /data and unable to find crypto footer'
Now phone is stuck on bootloop.
Click to expand...
Click to collapse
On j530F sometimes it has mount so you have to reboot recovery after some actions. At least for me
tutorial video :more zips added with Teamwinrecovery
Hello there
can make pls tutorial video how to make add more zips because this method very important and i dont want make bricks my phone